CS Paper Radar

How to Effectively Manage the Energy in Residential Systems: Development and Comparison of Methods

Julian Ruddick

eess.SY cs.LGcs.NE ·submitted 2026-11-19 16:59 UTC · v1
published

Abstract

The transition from fossil fuels presents significant challenges in energy management. To ensure a sustainable energy future, it is crucial to reduce energy consumption when possible and to synchronize electricity consumption and storage with the production from sources with low greenhouse gas emissions. This thesis explores a variety of energy management methods used to manage batteries, heat pumps, and other energy-related systems. The thesis presents three simulation cases alongside one real-world experiment to compare energy management done through simple rules, optimization, and machine learning methods. Furthermore, this thesis introduces TreeC, a novel machine learning-based method that learns understandable yet efficient energy management strategies, applicable to many cases. The three key contributions of this thesis can be summarized as follows: 1) The developed TreeC method demonstrates competitive performance compared to a variety of energy management approaches, such as model predictive control and reinforcement learning, across a diverse set of energy management problems. The understandability of TreeC's energy management strategies greatly improves the transparency and trustworthiness of machine learning-based energy management. 2) The real-world experiment highlights the need to validate energy management methods on actual hardware and not solely on simulations. Both TreeC and model predictive control performed worse than in simulations, due to, respectively, insufficiently representative training data and the real-time input data not being reliable enough. 3) Energy management algorithms reduce costs in electrified Belgian dwellings, particularly in poorly insulated dwellings, electric vehicle chargers, and photovoltaic installations. However, on average, these cost savings do not yet outweigh the current costs and effort required to implement such algorithms.

Comment
PhD thesis, Vrije Universiteit Brussel, defended 25 February 2026. 178 pages. Promotors: Maarten Messagie and Thierry Coosemans. Chapters 4-5 are based on Knowledge-Based Systems 309 (2025) 112756, doi:10.1016/j.knosys.2024.112756; chapter 6 on Energy and AI 18 (2024) 100448, doi:10.1016/j.egyai.2024.100448; chapter 7 on BuildSys '26, pp. 405-416, doi:10.1145/3744256.3812575
DOI
10.13140/RG.2.2.13155.41763

Closest papers

Nearest neighbours by meaning across the whole index.

Automated Feature Engineering, AutoML, and Decision-Focused Learning for Improved Energy Consumption Forecasting

cs.AI ·2026-09-28 ·Nasser Alkhulaifi
similarity 0.70
Abstract · PhD thesis, School of Computer Science, University of Nottingha, United Kingdom

The rising cost and demand for energy, together with environmental sustainability goals, create major challenges for energy management. Energy Consumption Forecasting (ECF) supports planning by predicting future consumption, but Machine Learning (ML) models for ECF often depend on expert-driven Feature Engineering (FE). This thesis addresses that dependence through three contributions. First, it establishes and evaluates a comprehensive FE pipeline for ECF and investigates domain-specific features. Second, it introduces AutoEnergy, a domain-tailored automated FE algorithm that generates interpretable features from timestamps and lagged consumption and integrates with AutoML for end-to-end ECF modelling. Across eighteen real-world energy datasets spanning residential, commercial, industrial, renewable, and grid domains, AutoEnergy reduces forecasting error by 19.52%-84.72% relative to baseline AutoML and established automated FE methods, while running 1.31-4.41 times faster, with gains varying by dataset. Third, AutoEnergy is integrated with Decision-Focused Learning (DFL) for a Battery Energy Storage System problem, jointly forecasting electricity prices and demand while optimising charging and discharging decisions. On a real-world UK property dataset, this approach reduces operating costs by 22.9%-56.5% compared with the same DFL models without automated FE. Overall, the results show that domain-specific automated FE can reduce reliance on manual feature design, improve forecasting accuracy, and translate predictive gains into measurable operational benefits in energy management.

0.14

Should Belgians Install an Advanced Energy Management System in Their Electrified Dwelling ?

eess.SY cs.LG ·2026-11-19 ·Julian Ruddick, Cedric De Cauwer, Thierry Coosemans, Maarten Messagie
publishedtheorycode/data similarity 0.70
Abstract · Full version including appendices A-C, which are not part of the 11-page proceedings version. Published at ACM BuildSys '26 under CC BY 4.0.…

As dwellings electrify and more complex electricity pricing spreads in Belgium, the question arises: What are the potential benefits of installing an advanced energy management systems in an electrified Belgian dwelling ? To answer this question, we simulate 500 representative Belgian dwellings in which fossil systems are replaced by controllable electric technologies: space heating via air-to-air heat pumps, domestic hot water via electric boilers, and private transport via electric vehicles with home chargers. Photovoltaic systems are assigned according to current adoption rates. We evaluate two advanced energy management systems (EMS): model predictive control (MPC) and TreeC, a machine learning method using decision trees to model the EMS strategy. These are compared to a rule-based controller (RBC) that mimics default operation and an MPC with perfect forecasts (MPC P) as an upper bound. Performance for these EMSs is assessed for 2023 under a real contract with hourly prices and a monthly peak tariff. Average annual savings versus RBC are 82.5 EUR, 116.6 EUR, and 177.4 EUR for TreeC, MPC, and MPC P, respectively. All EMSs deliver similar thermal comfort (26-31 Kh). MPC saves more, while TreeC achieves higher EV charge completion (93.3% vs 88.8% for MPC, with a max charge of 95%) and a smoother aggregate load across the 500 dwellings. Savings remain modest relative to EMS purchase (280-680 EUR) and subscription (0-360 EUR/year) costs which is not favourable towards widespread adoption. The data and code to reproduce this study are available at https://github.com/EVERGi/should_belgians_install_advanced_ems_paper.

0.73

The Smart Buildings Challenge: Learning Foundation Models for Real-World Optimization at Scale

cs.AI ·2026-10-13 ·Judah Goldfeder, Ayush Rai, Philippe M. Wyder, Na Li, Victoria Dean +9 more
similarity 0.68
Abstract · This is for a Neurips 2026 competition

Buildings cause nearly 40\% of carbon emissions in the US. Of total building emissions, HVAC systems are responsible for approximately 40-60\% and account for 15\% of global energy consumption. Despite advances in artificial intelligence, most buildings still operate as inefficiently as they did decades ago. Building optimization, perhaps more so than any other optimization problem, has enormous potential for Machine Learning (ML) driven impact on climate change, in both the short and long term. One of the biggest obstacles for building optimization is the lack of policy transfer. Most building control systems, whether simulation or learning based, don't generalize: they only work well for the building they were developed for, but not for other buildings. To solve this problem, we propose a challenge for the development of building foundation models that easily adapt to new buildings with minimal configuration and thereby enable building optimization to scale across the globe. Participants will build control policies on a set of simulated buildings, and have their policies evaluated on an unseen set of buildings. The buildings vary in size, layout, weather, material properties, and HVAC system. Successful outcomes from this initiative promise a massive leap forward in global sustainability efforts and demonstrate the great potential of ML to combat climate change.

0.33

Technical Comparative Benchmarking Study: Advanced AI Hybrid Methods for Renewable Energy Farm Optimization and Forecasting

cs.LG ·2026-08-27 ·Majid Masoumi, Asghar Dashtiy, Mohammad Dehghan, Mina Rajabi
similarity 0.65
Abstract

This study provides a comprehensive benchmarking of conventional machine learning (ML), ensemble learning, deep neural networks, recurrent architectures, Transformers, graph based models, and hybrid ensemble deep learning approaches under complementary renewable energy scenarios. Three datasets are considered: a large scale WEC dataset, a 16 WEC dataset, and operational 10 min SCADA measurements at the Penmanshiel wind farm. For structured WEC layout data, tree ensembles exhibited a clear advantage over conventional ML and neural predictors because randomized partitioning and boosting efficiently captured nonlinear layout power interactions without requiring explicit feature representation learning. The Extra Trees was the strongest model, achieving considerable results. Relative to the MLP baseline, this corresponds to an approximately 63.7% reduction in MAE, demonstrating the suitability of randomized tree ensembles for high dimensional structured WEC data. Also, STGCN reduced the MAE to approximately 167.0 kW and achieved R = 0.93 by explicitly learning spatial and temporal turbine interactions. The best overall forecasting accuracy was obtained by the RF BiLSTM hybrid, with an MAE=150.5 kW. Compared with standalone LSTM, this represents an approximately 75% reduction in MAE, while improving on STGCN by approximately 10.0%. Finally, the experiments reveal that no single AI architecture is universally optimal: randomized and boosted ensembles are particularly effective for structured WEC surrogate modeling, graph networks become advantageous when explicit spatial interactions dominate, and ensemble recurrent hybrids provide the strongest balance when nonlinear tabular relationships and temporal dynamics coexist.

0.12

Improving Energy Efficiency of Oil Platforms Through Optimal Loading of Diesel Generators Using Machine Learning and Search Algorithms

cs.LG cs.AI ·2026-08-22 ·Khivishta Boodhoo, Isaac Triguero, Josh Plumbly, Bruce Nicolson, William Meredith +1 more
similarity 0.64
Abstract

Rising energy demand, fossil fuel depletion and climate change highlight the need for more efficient energy production and consumption. Offshore oil and gas platforms face challenges related to inefficient energy use, system failures, accessibility and environmental impact. Machine learning (ML) offers opportunities to improve the safety, sustainability and efficiency of these systems; however, previous research has largely focused on increasing oil production rather than reducing energy consumption on platforms. This study investigates the use of ML and search algorithms to improve diesel efficiency on an offshore oil platform. Data collected over 18 months from a platform in Scotland were analysed, focusing on four diesel generators as the primary diesel-consuming equipment. Following exploratory data analysis and outlier detection, regression models were developed to predict daily diesel consumption for different generator power loads. Multiple Linear Regression and Artificial Neural Networks achieved the best predictive performance compared with Extra Trees Regression, Extreme Gradient Boosting and Random Forest. Search algorithms were then used to identify combinations of generator power loads that minimised daily diesel consumption. The results showed an average diesel saving of 27% per day compared with the worst daily power-load combinations, equivalent to approximately 24,000 litres/day. These findings demonstrate significant opportunities for improving energy efficiency on offshore oil platforms using ML-based optimisation.

0.23

Machine Learning-Enabled Wireless Power Transfer: A Task-Oriented Review of Structural Optimization, State and Parameter Estimation, and Adaptive Control

eess.SY ·2026-10-21 ·Denghao Luo, Yiheng Jiang, Jiaqi Zhao, Yuan Gao, Changsong Cai +2 more
code/data similarity 0.63
Abstract · 42 pages, 7 figures; review article

Wireless power transfer (WPT) systems must maintain efficient and safe energy delivery under variations in geometry, coupling, load, alignment, and operating conditions. Machine-learning methods are increasingly applied to accelerate structural design, estimate operating parameters and states, and support adaptive control and scheduling. This review develops a task-oriented framework organized around three interconnected domains: structural design and optimization, parameter and state estimation, and control and optimization. Supervised learning, reinforcement learning, and hybrid or physics-informed methods are compared in terms of data requirements, dependence on physical models, information sources, computational requirements, accuracy, online response, application scope, and optimization objectives. Supervised learning provides rapid surrogate modeling, regression, and classification when representative labeled data are available. Reinforcement learning addresses sequential control and scheduling but introduces challenges in reward design, safe exploration, and simulation-to-reality transfer. Hybrid methods integrate physical knowledge with data-driven models to improve data efficiency and physical consistency. The principal barriers to engineering deployment include limited and biased datasets, weak out-of-distribution generalization, insufficient physical consistency, unsafe online adaptation, embedded-resource constraints, and the absence of standardized benchmarks. Future research should prioritize uncertainty-aware and physics-informed learning, safe simulation-to-reality transfer, lightweight edge deployment, distributed coordination, reproducible evaluation, and digital-twin-assisted development.

0.41

Explainable AI for Solar PV Power Forecasting: From Model Selection to Trustworthy, Reproducible Deployment

cs.AI ·2026-11-19 ·Nuzhat Khan, Muhammad Paend Bakht, Ab Al-Hadi Ab Rahman, Fabiano Pallonetto, Amy Fahy +5 more
similarity 0.62
Abstract · 24 pages, 8 figures, 6 tables. Code and results available from the corresponding author on request

Machine learning (ML) is now a standard tool for forecasting the output of solar photovoltaic (PV) plants, yet published accuracy figures are often hard to compare and harder to trust. Many studies validate with random splits, report no reference forecast, and present feature attributions without saying what they can and cannot show. This paper reviews the main families of ML methods for PV power forecasting and resource assessment, from tree ensembles to deep and foundation models, and sets out a reproducible workflow that combines automated model search with explainable AI. The workflow is then tested on an openly available dataset: a 16.32 kWp plant in Porto, Portugal, forecast one day ahead from a 4 km numerical weather prediction grid. Over a full test year, the best models reach a normalised root mean square error (nRMSE) of 11.6% of installed capacity, about half the error of smart persistence. The choice of input features changed accuracy far more than the choice among strong algorithms, and shuffled cross-validation was mildly optimistic. After conformal calibration, the nominal 80% prediction intervals covered 81.7% of observations, against 64.5% before. SHAP rankings stayed stable when the model was retrained on different periods but shifted when correlated inputs were removed, so attributions should be read as properties of a model rather than of the plant. The paper closes with practical lessons and open problems, including deployment on edge hardware and the effect of a changing climate.

0.24

PowerZooJax: A JAX-based Power System Benchmark for Reinforcement Learning

cs.AI cs.LGeess.SY ·2026-09-28 ·Zhanhua Pan, Xiao Liu, Zhilong Cao, Jianhong Wang, Dawei Qiu
benchmarkcode/data similarity 0.62
Abstract · 42 pages

Power system operation is a safety-critical sequential decision-making problem, making it a natural testbed for reinforcement learning (RL). However, existing RL environments for power systems are often narrow in scope and computationally limited by CPU-based simulation workflows, making large-scale evaluation difficult. We introduce PowerZooJax, a JAX-based benchmark suite for RL in power system operation. It provides five constrained Markov decision process tasks spanning generation, transmission, distribution, distributed energy resources, and data center microgrid. By rewriting power flow, economic dispatch, market clearing, and device dynamics as JAX computation graphs, PowerZooJax keeps the entire training and evaluation loop on the GPU. Experiments show substantial speedups over CPU-based simulations and demonstrate standardized evaluation of policy returns, safety violations, and out-of-distribution stress conditions. Our open-source benchmark is available at: https://github.com/powerzoojax/PowerZooJax.

0.41