CS Paper Radar

Improving Energy Efficiency of Oil Platforms Through Optimal Loading of Diesel Generators Using Machine Learning and Search Algorithms

Khivishta Boodhoo, Isaac Triguero, Josh Plumbly, Bruce Nicolson, William Meredith, Nicholas Watson

cs.LG cs.AI ·submitted 2026-08-22 18:44 UTC · v3

Abstract

Rising energy demand, fossil fuel depletion and climate change highlight the need for more efficient energy production and consumption. Offshore oil and gas platforms face challenges related to inefficient energy use, system failures, accessibility and environmental impact. Machine learning (ML) offers opportunities to improve the safety, sustainability and efficiency of these systems; however, previous research has largely focused on increasing oil production rather than reducing energy consumption on platforms. This study investigates the use of ML and search algorithms to improve diesel efficiency on an offshore oil platform. Data collected over 18 months from a platform in Scotland were analysed, focusing on four diesel generators as the primary diesel-consuming equipment. Following exploratory data analysis and outlier detection, regression models were developed to predict daily diesel consumption for different generator power loads. Multiple Linear Regression and Artificial Neural Networks achieved the best predictive performance compared with Extra Trees Regression, Extreme Gradient Boosting and Random Forest. Search algorithms were then used to identify combinations of generator power loads that minimised daily diesel consumption. The results showed an average diesel saving of 27% per day compared with the worst daily power-load combinations, equivalent to approximately 24,000 litres/day. These findings demonstrate significant opportunities for improving energy efficiency on offshore oil platforms using ML-based optimisation.

Closest papers

Nearest neighbours by meaning across the whole index.

How to Effectively Manage the Energy in Residential Systems: Development and Comparison of Methods

eess.SY cs.LGcs.NE ·2026-11-19 ·Julian Ruddick
published similarity 0.64
Abstract · PhD thesis, Vrije Universiteit Brussel, defended 25 February 2026. 178 pages. Promotors: Maarten Messagie and Thierry Coosemans. Chapters 4-…

The transition from fossil fuels presents significant challenges in energy management. To ensure a sustainable energy future, it is crucial to reduce energy consumption when possible and to synchronize electricity consumption and storage with the production from sources with low greenhouse gas emissions. This thesis explores a variety of energy management methods used to manage batteries, heat pumps, and other energy-related systems. The thesis presents three simulation cases alongside one real-world experiment to compare energy management done through simple rules, optimization, and machine learning methods. Furthermore, this thesis introduces TreeC, a novel machine learning-based method that learns understandable yet efficient energy management strategies, applicable to many cases. The three key contributions of this thesis can be summarized as follows: 1) The developed TreeC method demonstrates competitive performance compared to a variety of energy management approaches, such as model predictive control and reinforcement learning, across a diverse set of energy management problems. The understandability of TreeC's energy management strategies greatly improves the transparency and trustworthiness of machine learning-based energy management. 2) The real-world experiment highlights the need to validate energy management methods on actual hardware and not solely on simulations. Both TreeC and model predictive control performed worse than in simulations, due to, respectively, insufficiently representative training data and the real-time input data not being reliable enough. 3) Energy management algorithms reduce costs in electrified Belgian dwellings, particularly in poorly insulated dwellings, electric vehicle chargers, and photovoltaic installations. However, on average, these cost savings do not yet outweigh the current costs and effort required to implement such algorithms.

0.42

Predicting Wind Turbine Power Using Machine Learning and Weather Forecasts

cs.AI cs.LG ·2026-09-05 ·Khivishta Boodhoo, Isaac Triguero, Josh Plumbly, Bruce Nicolson, Nicholas Watson
similarity 0.63
Abstract

Offshore wind turbines are widely used to generate renewable energy, but their maintenance can result in decreased efficiency due to forced shutdowns. Accurate wind turbine power predictions can identify periods of low power that would be ideal for scheduling maintenance. However, the effects of data volume, feature selection, and data preprocessing on the performance of such power prediction models have not been thoroughly studied. Besides, current models have limited transferability between different wind turbines. Therefore, this study developed a baseline Linear Regression for performance comparison with a more complex Artificial Neural Network model to predict the power output of a wind turbine, using weather conditions only to enhance applicability. A range of data preprocessing techniques were studied, and models were trained on one month and one year of data to determine the effects of data preprocessing and volume on model performance. Feature selection was explored using a Random Forest Regressor. The best results from the different models showed that the Artificial Neural Network models provided the highest accuracy, with an R2 score of 0.98 and a low Mean Absolute Error of 194, when compared with the baseline model (R2 score of 0.94 and Mean Absolute Error of 441). The model performance is comparable to the range of results in past studies, with the advantage that the proposed method leverages a separate weather dataset from a nearby weather station, enabling future applications for similar wind turbines in different locations. The Artificial Neural Network model was then used to identify 4-h periods of low power predictions over 2 months (simulating application for future periods), providing power output savings of approximately 2000 kW for each maintenance event.

0.10

Automated Feature Engineering, AutoML, and Decision-Focused Learning for Improved Energy Consumption Forecasting

cs.AI ·2026-09-28 ·Nasser Alkhulaifi
similarity 0.61
Abstract · PhD thesis, School of Computer Science, University of Nottingha, United Kingdom

The rising cost and demand for energy, together with environmental sustainability goals, create major challenges for energy management. Energy Consumption Forecasting (ECF) supports planning by predicting future consumption, but Machine Learning (ML) models for ECF often depend on expert-driven Feature Engineering (FE). This thesis addresses that dependence through three contributions. First, it establishes and evaluates a comprehensive FE pipeline for ECF and investigates domain-specific features. Second, it introduces AutoEnergy, a domain-tailored automated FE algorithm that generates interpretable features from timestamps and lagged consumption and integrates with AutoML for end-to-end ECF modelling. Across eighteen real-world energy datasets spanning residential, commercial, industrial, renewable, and grid domains, AutoEnergy reduces forecasting error by 19.52%-84.72% relative to baseline AutoML and established automated FE methods, while running 1.31-4.41 times faster, with gains varying by dataset. Third, AutoEnergy is integrated with Decision-Focused Learning (DFL) for a Battery Energy Storage System problem, jointly forecasting electricity prices and demand while optimising charging and discharging decisions. On a real-world UK property dataset, this approach reduces operating costs by 22.9%-56.5% compared with the same DFL models without automated FE. Overall, the results show that domain-specific automated FE can reduce reliance on manual feature design, improve forecasting accuracy, and translate predictive gains into measurable operational benefits in energy management.

0.14

Technical Comparative Benchmarking Study: Advanced AI Hybrid Methods for Renewable Energy Farm Optimization and Forecasting

cs.LG ·2026-08-27 ·Majid Masoumi, Asghar Dashtiy, Mohammad Dehghan, Mina Rajabi
similarity 0.59
Abstract

This study provides a comprehensive benchmarking of conventional machine learning (ML), ensemble learning, deep neural networks, recurrent architectures, Transformers, graph based models, and hybrid ensemble deep learning approaches under complementary renewable energy scenarios. Three datasets are considered: a large scale WEC dataset, a 16 WEC dataset, and operational 10 min SCADA measurements at the Penmanshiel wind farm. For structured WEC layout data, tree ensembles exhibited a clear advantage over conventional ML and neural predictors because randomized partitioning and boosting efficiently captured nonlinear layout power interactions without requiring explicit feature representation learning. The Extra Trees was the strongest model, achieving considerable results. Relative to the MLP baseline, this corresponds to an approximately 63.7% reduction in MAE, demonstrating the suitability of randomized tree ensembles for high dimensional structured WEC data. Also, STGCN reduced the MAE to approximately 167.0 kW and achieved R = 0.93 by explicitly learning spatial and temporal turbine interactions. The best overall forecasting accuracy was obtained by the RF BiLSTM hybrid, with an MAE=150.5 kW. Compared with standalone LSTM, this represents an approximately 75% reduction in MAE, while improving on STGCN by approximately 10.0%. Finally, the experiments reveal that no single AI architecture is universally optimal: randomized and boosted ensembles are particularly effective for structured WEC surrogate modeling, graph networks become advantageous when explicit spatial interactions dominate, and ensemble recurrent hybrids provide the strongest balance when nonlinear tabular relationships and temporal dynamics coexist.

0.12

Two-stage Residual Learning for Modelling Strength-Informed Optimisation of Thermal Systems

cs.LG ·2026-10-14 ·Talha Ansar, Waqar Muhammad Ashraf, Abdulelah S. Alshehri, Omar Bayomie
similarity 0.59
Abstract

Aggregate performance metrics do not identify local modelling inaccuracies in machine learning (ML) surrogates used for thermal-system optimisation. This study assesses local modelling strength through validation-based reliability screening and post-optimisation residual assessment. A two-stage residual learning (TSRL) framework, built on artificial neural networks (ANNs), is developed for modelling-strength-informed and domain-constrained optimisation of thermal systems. Within the TSRL framework, a base ANN predicts the process output, and a residual ANN learns the signed residuals left by the base ANN. The TSRL framework is implemented on two case studies of thermal systems, including 817 simulation observations of a crude distillation unit and operating records from a 395 MW industrial gas turbine. The TSRL framework reduces the test root mean square error (RMSE) from 10.3 g/s to 4.7 g/s for Fuel Oil in the refinery dataset and from 151 kJ/kWh to 105 kJ/kWh for turbine heat rate (THR). The base ANNs trained within TSRL are embedded in domain-constrained optimisation problems, and the modelling strength at each computed solution is assessed using the locked residual-score threshold. Each computed solution receives a good modelled region (GMR) or weak modelled region (WMR) label to inform ML model-based decision-making for safety-critical operation of thermal systems.

0.17

A Machine Learning Framework for Predicting Restaurant Food Waste to Support Sustainable Food Management

cs.LG ·2026-09-08 ·Md Mehedi Hasan Naeem, Md Ashraful Islam, Moumita Barua, Ishtiyak Ahmmad Araf, Md. Arefin Haque Mahir
published similarity 0.59
Abstract · 6 pages, 6 figures. Accepted and presented at the 2026 IEEE International Conference on Signal Processing, Information, Communication and Sy…

Food waste in the restaurant sector poses a substantial challenge to environmental sustainability and economic efficiency. This paper presents an exploratory machine learning framework for estimating daily restaurant food waste quantities from operational and contextual features. A structured dataset was constructed by integrating restaurant demand records, meteorological data and temporal event indicators, yielding 77,980 records across 27 features. Because large-scale ground-truth food waste measurements are not publicly available, the target variable was derived from operationally justified assumptions, with the complete construction formula and controlled stochastic variability disclosed for full reproducibility. Four supervised regression models, namely Linear Regression, Decision Tree, Random Forest and Gradient Boosting, were evaluated under a chronological 70-30 train-test split that respects the temporal ordering of restaurant operations, augmented by 5-fold time-series cross-validation. All reported metrics are explicitly scoped to performance against the constructed target and do not imply validation against measured food waste. Ensemble methods consistently outperformed linear baselines. Random Forest attained an MAE of 6.19 kg, RMSE of 8.36 kg and $R^2$ of 0.817 on the realistic feature subset following systematic exclusion of algebraically leakage-prone variables. Feature importance analysis identified menu diversity, operational area and temporal activity patterns as the primary predictive drivers. The full dataset, target construction formula, codebase and experimental configurations are publicly released to support reproducibility and future extension to empirically measured waste data.

0.36

XGBoost "is all you need": the case of forecasting transmitted heat energy in District Heating Systems

cs.LG eess.SY ·2026-08-11 ·Milan Zdravković
published similarity 0.57
Abstract · 9 pages, 7 figures. This preprint corresponds to the paper published in Lecture Notes in Networks and Systems, vol. 860 (ICIST 2024), Spring…

This paper presents a comparative study of two distinct approaches, XGBoost and Long-Short Term Memory (LSTM), for forecasting transmitted heat energy in District Heating Systems (DHS). The objective is to explore scenarios in which conventional ML algorithms demonstrate better performance over deep learning networks in time series forecasting and the associated benefits in terms of computational cost and environmental impact. The study focuses on a real-world DHS dataset. Through experimentation and analysis, it is demonstrated that XGBoost consistently outperforms LSTM in this specific forecasting task. The difference is explained by the error distribution illustrating that LSTM makes more significant errors in the intervals of less data availability. The reduced computational demands of conventional ML approaches not only result in cost savings but also minimize the carbon footprint associated with data analysis tasks in energy systems.

0.65

Are Gradient Boosting Models Suitable for Intermittent Demand Forecasting?

cs.LG ·2026-09-13 ·Vladislav Kislinskii, Mazhar Hameed
similarity 0.55
Abstract

Demand forecasting is critical in modern industry, offering opportunities to reduce costs and gain competitive advantage through improved inventory management. However, forecasting becomes particularly challenging for products with intermittent demand, where demand occurs infrequently and time series contain many zero observations. Such dynamics are common across diverse sectors, such as industrial organizations, consumer goods, aviation, automotive, and electronics. Motivated by these challenges, this paper explores the potential of gradient boosting models to improve forecasting performance. We evaluate statistical, specialized, machine learning, and ensemble approaches across multiple datasets. The results show that specialized methods achieve the strongest performance among individual models, while gradient boosting on its own tends to underperform. However, combining a machine learning model with a specialized approach improves forecasting accuracy by up to 10%, demonstrating that even simple ensembles can outperform single models. Overall, the findings highlight the value of combining machine learning with domain-specific forecasting techniques for intermittent demand.

0.15