CS Paper Radar

Two-stage Residual Learning for Modelling Strength-Informed Optimisation of Thermal Systems

Talha Ansar, Waqar Muhammad Ashraf, Abdulelah S. Alshehri, Omar Bayomie

cs.LG ·submitted 2026-10-14 03:57 UTC · v1

Abstract

Aggregate performance metrics do not identify local modelling inaccuracies in machine learning (ML) surrogates used for thermal-system optimisation. This study assesses local modelling strength through validation-based reliability screening and post-optimisation residual assessment. A two-stage residual learning (TSRL) framework, built on artificial neural networks (ANNs), is developed for modelling-strength-informed and domain-constrained optimisation of thermal systems. Within the TSRL framework, a base ANN predicts the process output, and a residual ANN learns the signed residuals left by the base ANN. The TSRL framework is implemented on two case studies of thermal systems, including 817 simulation observations of a crude distillation unit and operating records from a 395 MW industrial gas turbine. The TSRL framework reduces the test root mean square error (RMSE) from 10.3 g/s to 4.7 g/s for Fuel Oil in the refinery dataset and from 151 kJ/kWh to 105 kJ/kWh for turbine heat rate (THR). The base ANNs trained within TSRL are embedded in domain-constrained optimisation problems, and the modelling strength at each computed solution is assessed using the locked residual-score threshold. Each computed solution receives a good modelled region (GMR) or weak modelled region (WMR) label to inform ML model-based decision-making for safety-critical operation of thermal systems.

Closest papers

Nearest neighbours by meaning across the whole index.

Assessment of Machine Learning-Based Critical Heat Flux Models in the CTF Subchannel Code for Square Rod Bundle Prediction

cs.LG ·2026-09-18 ·Aidan Furlong, Vinicius de Melo Monteiro, Robert Salko, Juliana Pacheco Duarte, Xu Wu
similarity 0.66
Abstract · 28 pages, 10 figures

The prediction of critical heat flux (CHF), a key safety-related quantity in nuclear thermal hydraulics, remains an important challenge due to its direct relationship with fuel performance and reactor safety. Recent studies have demonstrated that relative to traditional empirical correlations and lookup tables (LUTs), machine learning (ML) methods can substantially improve CHF prediction accuracy. Most ML-based CHF models, however, have been developed and evaluated using tube databases, leaving their applicability to reactor-relevant rod bundle geometries largely unexplored. This study evaluates ML-based CHF models deployed within the CTF subchannel code using the Electric Power Research Institute (EPRI) rod bundle CHF database. Both pure and hybrid residual correction models are considered in local and semilocal formulations. The tube-trained ML CHF models generally transferred favorably to rod bundle applications and outperformed traditional CHF methods across most geometries and operating conditions. The local hybrid LUT model produced the strongest overall performance, and the semilocal pure ML model remained highly competitive. Comparison against the Bowring correlation, W-3 correlation, and 2006 Groeneveld LUT demonstrated that substantial improvements in rod bundle CHF prediction are possible even when models are trained exclusively on tube data. These findings provide one of the first large-scale assessments of ML-based CHF models in square rod bundles within a production-level subchannel analysis environment and support their broader application in reactor thermal hydraulic analysis.

0.33

PowerModels-ACOPF-AI: On-the-Fly Machine Learning Approach for Solving AC Optimal Power Flow Integrating Renewable Energy Sources

eess.SY ·2026-09-16 ·Bhuban Dhamala, Jose Tabarez, Anup Pandey
benchmark similarity 0.61
Abstract

The increasing complexity of modern power systems, driven by high renewable penetration, load variability, and operational uncertainty, demands fast and reliable solutions to the AC optimal power flow problem (AC-OPF). Traditional optimization methods, though accurate, often struggle with scalability and high computational burdens, making them impractical for real-time use in large networks. This paper introduces PowerModels-ACOPF-AI, a two-stage Bayesian Neural Network (BNN) surrogate designed to predict generator set points, bus voltages, and phase angles with uncertainty. The framework integrates a performance-sensitive on-the-fly learning mechanism that identifies regions of degraded prediction accuracy and dynamically retrains with additional AC-OPF solutions generated by PowerModels.jl. This self-adaptive loop ensures robust performance, enabling the model to maintain accuracy under novel or highly variable operating conditions. Validation on benchmark test systems of different sizes, namely the 30-bus, 200-bus, and 500-bus networks, demonstrates strong generalization capability, efficient handling of stochastic renewable injections, and the ability to provide rapid, uncertainty-aware predictions. Beyond predictive accuracy, the proposed approach offers practical value as both a real-time advisory tool for system operators and a fast initializer for conventional solvers, thus supporting resilient and efficient grid operation in future power systems.

0.16

Availability-Aware Historical Feedback Learning for Electric Arc Furnace Temperature and Chemical Composition Prediction

cs.LG ·2026-11-12 ·Ahmed Shoyeb Raihan, Farzana Islam, Ashish Nimbarte, Imtiaz Ahmed
similarity 0.60
Abstract

Electric arc furnace (EAF) steelmaking plays an increasingly important role in recycled and lower-carbon steel production. However, variability in charged materials, energy input, and operating conditions makes accurate prediction of molten steel temperature and final chemical composition challenging. Intermittent or delayed measurements limit the information available for timely prediction. This study develops an availability-aware historical-feedback learning framework for predicting EAF endpoint temperature and the final concentrations of twelve chemical elements. Eight industrial data sources are integrated into three progressively enriched predictor representations comprising 19 static, 39 temporal, and 47 history-informed features. Historical outcomes are incorporated only when eligible under an assumed 60-minute measurement-release delay. Using 19,738 temperature heats and 3,341 chemistry heats, twelve tuned regression algorithms are evaluated through chronological forward validation. The proposed historical-feedback representation reduces root mean squared error (RMSE) in 147 of 156 matched algorithm-target comparisons. For temperature prediction, ExtraTrees achieves an RMSE of 12.290 degrees C, representing a 5.54 percent reduction compared with its temporal-only counterpart. Historical-feature ablation and feedback-delay sensitivity analyses demonstrate the importance of recent outcome information and its availability. In a separate retrospective later-period evaluation, lightweight adaptive residual correction reduces temperature RMSE from 12.502 to 12.275 degrees C without retraining the underlying model. Exploratory deep learning comparisons and target-specific feature-attribution analyses provide additional insights into predictive behavior. The results establish historical outcome availability and sequential feedback as important considerations for EAF endpoint prediction.

0.29

Improving Energy Efficiency of Oil Platforms Through Optimal Loading of Diesel Generators Using Machine Learning and Search Algorithms

cs.LG cs.AI ·2026-08-22 ·Khivishta Boodhoo, Isaac Triguero, Josh Plumbly, Bruce Nicolson, William Meredith +1 more
similarity 0.59
Abstract

Rising energy demand, fossil fuel depletion and climate change highlight the need for more efficient energy production and consumption. Offshore oil and gas platforms face challenges related to inefficient energy use, system failures, accessibility and environmental impact. Machine learning (ML) offers opportunities to improve the safety, sustainability and efficiency of these systems; however, previous research has largely focused on increasing oil production rather than reducing energy consumption on platforms. This study investigates the use of ML and search algorithms to improve diesel efficiency on an offshore oil platform. Data collected over 18 months from a platform in Scotland were analysed, focusing on four diesel generators as the primary diesel-consuming equipment. Following exploratory data analysis and outlier detection, regression models were developed to predict daily diesel consumption for different generator power loads. Multiple Linear Regression and Artificial Neural Networks achieved the best predictive performance compared with Extra Trees Regression, Extreme Gradient Boosting and Random Forest. Search algorithms were then used to identify combinations of generator power loads that minimised daily diesel consumption. The results showed an average diesel saving of 27% per day compared with the worst daily power-load combinations, equivalent to approximately 24,000 litres/day. These findings demonstrate significant opportunities for improving energy efficiency on offshore oil platforms using ML-based optimisation.

0.23

From Grey-Box to Green-Box: When can Physics-Informed Machine Learning Reduce Carbon Footprints in Structural Health Monitoring?

cs.LG ·2026-09-27 ·Daisy R. Bradley, Nathan A. Hinchliffe, Daniel J. Pitchforth, Matthew R. Jones, Elizabeth J. Cross
similarity 0.58
Abstract · 27 pages, 15 figures

Machine learning plays an increasingly vital role in engineering, but the corresponding increase in compute time is not without environmental cost. Physics-informed machine learning or "grey-box" models have been developed to overcome some of the limitations of traditional black-box learners, utilising the physical insight that an engineer would have about the structure they are modelling and have shown promising results in the structural engineering field among many others. This work explores whether an additional advantage could be a reduced environmental impact, considering the relationship between training data quantity and training time, linking this duration to carbon emissions from computing. In a structural health monitoring context, four physics-informed machine learning approaches - spanning Gaussian processes and neural networks - are evaluated: residual modelling, input augmentation, hybrid modelling, and constrained learning. The emissions for training each of the models to reach a given error threshold is compared, and in most examples, shown to be lower for the physics-informed models (with input augmented models being an exception). This reduction in training emissions further compounds the environmental savings achieved by collecting and storing less data. Although promising results, we cannot expect a silver bullet and the case studies demonstrate that a trade-off is needed between the increased complexity that comes from introducing physics into a machine learner, against the gain from reduced training data requirements.

0.23

A tale of perfect fit and phantom optima: how data-driven models can fail in real-time optimization

eess.SY cs.AI ·2026-08-24 ·Prithvi Dake, Rahul Bindlish, James B. Rawlings
benchmark similarity 0.58
Abstract

Real-time optimization (RTO) relies on process models to locate economically optimal operating conditions. Because developing first-principles models requires significant process knowledge, data-driven alternatives are increasingly attractive. Modern machine-learning models can fit historical plant data accurately and often pass standard validation tests. Whether such models can be trusted for economic optimization, however, remains unclear. We investigate this question using a vinyl acetate monomer benchmark process with a unique, well-conditioned economic optimum. We train a structured hybrid model that combines known mass balances and thermodynamics with a neural-network closure for unknown kinetics, and a fully data-driven neural ordinary differential equation (ODE) model. Both models reproduce plant measurements accurately and exhibit little variation in predictions across random initializations. Yet their economic optima differ substantially from that of the plant. Where the plant returns a single optimum on multistart search, the trained models return many phantom optima. We further show that the training optimizer alone can be yet another source of error. Even with noise-free data and initialization at weights that recover the plant optimum, stochastic gradient training can drift to weights that yield substantially worse RTO solutions. The identified model is thus an artifact of the training optimizer as well as the data. These results demonstrate that a good predictive fit of all available measurements does not guarantee reliable economic performance. A data-driven model for RTO should at least be required to recover the optimum on a decision-oriented benchmark like the one developed here before being considered for plant testing and application.

0.23

Techno-Economic Analysis of Repurposing Abandoned Oil Wells for Geothermal Energy Extraction Using Physics-Informed Neural Networks

cs.CE ·2026-08-21 ·Hung-Yu Lin, Kuan-Chun Shih, Lea-Der Chen
published similarity 0.58
Abstract · 22 pages, 17 figures. Presented at the ASME 2026 20th International Conference on Energy Sustainability, Bellevue, WA, USA, July 26 to 29, 2…

To achieve net-zero targets by 2050, it is critical to diversify renewable energy. Hydropower, wind, and solar energy dominate; geothermal energy remains underutilized. Conventional Enhanced Geothermal Systems (EGS) rely on hydraulic stimulation, which poses risks such as induced seismicity. To address this, Closed-Loop Geothermal Systems (CLGS) circulate working fluids in sealed tubing to avoid direct reservoir contact, making them a potential solution for repurposing idle oil wells without environmental hazards. This study developed a Physics-Informed Neural Network (PINN) to model the CLGS performance. Unlike traditional neural networks, PINN explicitly embeds governing physical equations into their learning processes, such as heat conduction and convection. This integration enabled the model to accurately predict the wellbore temperature and flow characteristics over a 25-year lifespan, even with sparse training data. The simulation results confirmed stable long-term predictions. When coupled with an Organic Rankine Cycle (ORC) model, the system yielded a thermodynamic efficiency of 9.5%. Crucially, several economic indicators (e.g., DPP, NPV, and LCOE) are conducted to evaluate the investment feasibility and economic potential of the proposed CLGS-based power generation system. This proposed framework provides a scalable, physics-consistent tool for evaluating both technical performance and economic returns, offering a robust pathway to accelerate geothermal adoption.

0.38

Predicting Wind Turbine Power Using Machine Learning and Weather Forecasts

cs.AI cs.LG ·2026-09-05 ·Khivishta Boodhoo, Isaac Triguero, Josh Plumbly, Bruce Nicolson, Nicholas Watson
similarity 0.57
Abstract

Offshore wind turbines are widely used to generate renewable energy, but their maintenance can result in decreased efficiency due to forced shutdowns. Accurate wind turbine power predictions can identify periods of low power that would be ideal for scheduling maintenance. However, the effects of data volume, feature selection, and data preprocessing on the performance of such power prediction models have not been thoroughly studied. Besides, current models have limited transferability between different wind turbines. Therefore, this study developed a baseline Linear Regression for performance comparison with a more complex Artificial Neural Network model to predict the power output of a wind turbine, using weather conditions only to enhance applicability. A range of data preprocessing techniques were studied, and models were trained on one month and one year of data to determine the effects of data preprocessing and volume on model performance. Feature selection was explored using a Random Forest Regressor. The best results from the different models showed that the Artificial Neural Network models provided the highest accuracy, with an R2 score of 0.98 and a low Mean Absolute Error of 194, when compared with the baseline model (R2 score of 0.94 and Mean Absolute Error of 441). The model performance is comparable to the range of results in past studies, with the advantage that the proposed method leverages a separate weather dataset from a nearby weather station, enabling future applications for similar wind turbines in different locations. The Artificial Neural Network model was then used to identify 4-h periods of low power predictions over 2 months (simulating application for future periods), providing power output savings of approximately 2000 kW for each maintenance event.

0.10