CS Paper Radar

An Open-Source ROS 2 Framework for Shared Control in Surgical Teleoperation: Integrating the Haply Inverse3 with the da Vinci Research Kit

Balint Varga, Sebastian Fritz, Gergely Kiss, Kristof Takacs, Peter Galambos

cs.RO eess.SY ·submitted 2026-11-19 17:41 UTC · v1
benchmarkcode/data

Abstract

Surgical teleoperation deprives surgeons of touch, forcing visual inference of tissue forces; the commercial platforms now restoring force feedback remain closed, preventing open research on haptic shared control. This paper provides a system contribution: it presents an open-source, ROS 2-native framework that integrates the compact, three-degree-of-freedom (3-DOF) Haply Inverse3 haptic device with the da~Vinci Research Kit (dVRK). The framework includes a novel mapping strategy that combines 3-DOF translational device input with separately tracked VerseGrip orientation into 6-DOF patient-side manipulator commands. Two virtual-fixture-inspired guidance modes serve as reference implementations to evaluate the framework in a within-subjects user study on a teleoperated hot-wire benchmark task in simulation, and the architecture is further demonstrated on physical dVRK hardware. Relative to unassisted manual control, linear guidance significantly reduced both the number of wire contacts and the task completion time, whereas the progressive-stiffness guidance produced consistent but statistically non-significant trends in the same direction. Subjective ratings of workload, agency, and satisfaction showed favorable descriptive trends for the guidance modes. The results demonstrate the feasibility of haptic shared control with a compact device coupled to the dVRK and provide an openly available, reproducible platform for future research. They further suggest that simpler linear feedback may be more robust for inexperienced operators than more complex profiles.

Closest papers

Nearest neighbours by meaning across the whole index.

M3-Tele: A Unified Multimodal Teleoperational Framework for Compliant Whole-Body Mobile Manipulation

cs.RO ·2026-09-07 ·Hengxiang Chen, Shenwen Deng, Yujian Ma, Gan Ma, Qiang Li +1 more
similarity 0.71
Abstract · 15 pages,12 figures,a under-review journal

Executing contact-rich tasks efficiently requires the seamless integration of whole-body coordination and physical compliance regulation. However, existing teleoperation and data-collection frameworks often overlook the joint consideration of multimodal perception and coordinated whole-body operation. This limitation can reduce the efficiency and quality of demonstration collection, thereby affecting the effectiveness of downstream policy learning. In this work, we present \textbf{M3-Tele}: A Unified \underline{M}ultimodal \underline{Tele}operational Framework for Compliant Whole-Body \underline{M}obile \underline{M}anipulation, enabling stable physical interaction and capturing aligned visual, tactile, force, and proprioceptive observations during task execution. Extensive experiments demonstrate that the proposed framework significantly improves contact-rich teleoperation performance. The proposed controller reduces the force tracking error from 4.132~N to 0.346~N, the contact loss from 2.46 to 0.02 events per trial and the tactile deformation error by 65\%. User studies across four mobile manipulation tasks also verify the reliability and usability of the proposed system. Furthermore, Diffusion Policy experiments highlight the value of joint tactile and force sensing.

0.22

Now You Feel It, Now You See Me: Digital-Twin-based Teleoperation Interface for Dexterous Manipulation

cs.RO ·2026-10-04 ·Youngchan Shim, Kyutae Lee, JooYun Kim, Jaeseong Hwang, Harim Ji +1 more
similarity 0.71
Abstract · 8 pages, 5 figures, 4 tables

Teleoperation is becoming increasingly important for collecting high-quality demonstrations to teach robots dexterous manipulation skills. For dexterous manipulation, bare-hand tracking provides a practical way to control robotic hands and demonstrate coordinated finger movements without gloves or exoskeletons. However, this type of teleoperation faces two key feedback limitations: a lack of force feedback and visual feedback of occluded region. The absence of force feedback hinders precise and safe manipulation, as operators must infer contact force visually rather than feel them directly. Occlusion by objects or other robot parts impairs the assessment of hand positions, approach distances, and pre-grasp configurations suited to the object's shape. To address these limitations, we propose a digital-twin-based augmented reality (AR) teleoperation interface that integrates bare-hand tracking, bimanual robotic hands, and virtual representations of the robot and task objects. The interface renders tactile measurements on robot hand meshes as visuo-force feedback. Furthermore, it offers a user-controlled virtual view panel or occlusion-aware transparency rendering to provide occlusion-mitigating visual feedback. We evaluated the interface through user studies involving Task 1 and Task 2, examining how force visualization and visual assistance support demonstration collection in tasks requiring careful force regulation and manipulation under occlusion.

0.12

DITTO: Dexterous Interface for Transparent TeleOperation

cs.RO ·2026-09-16 ·Joaquin Palacios, Katelyn Lee, Cheng Zhang, Zhanpeng He, Matei Ciocarlie
similarity 0.70
Abstract · 8 Pages, 6 Figures, 4 Tables

Collecting data for manipulation with high-DOF hands is challenging, as interfaces must capture rich hand motion while rendering the contact interactions essential for precise manipulation. Existing data collection approaches face a trade-off: teleoperation ensures deployment consistency but lacks force feedback, while handheld (in-the-wild) systems provide natural force transparency but introduce a visual embodiment gap at deployment. We present DITTO, a Dexterous Interface for Transparent TeleOperation, which resolves this through the anatomically informed co-design of a dexterous 7-DOF robotic hand and a kinematically equivalent motorized exoskeleton. A 1-to-1 actuator mapping between the exoskeleton and robotic hand enables handheld (in-the-wild) data collection and bilateral teleoperation with joint-level force feedback unified in a single platform. We demonstrate that the DITTO exoskeleton spans the operator's natural index-to-thumb workspace, and showcase DITTO's dexterous capabilities via learned policies on contact-rich tasks.

0.51

ViHaTeleop: A Low-Cost, Lightweight Visual-Haptic Teleoperation System for Dexterous Manipulation Learning

cs.RO ·2026-08-17 ·Fucai Zhu, Yanhou Lai, Paul Maestre, Koichi Hashimoto
published similarity 0.69
Abstract · Accepted to the 2026 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS). 8 pages

Learning from demonstration is a promising approach for dexterous manipulation, but collecting high-quality contact-critical demonstrations remains difficult with low-cost teleoperation hardware. We present ViHaTeleop, a lightweight (0.7 kg), low-cost (\$550) visual-haptic teleoperation system with SLAM-based wrist tracking, camera-based hand tracking, and finger-wise vibrotactile feedback through Linear Resonant Actuators (LRA). The system includes several design choices (LED illumination, fisheye hand camera, and tactile-aware retargeting constraints) and is deployed on Franka + LEAP Hand + 9DTact in both real and simulated environments. Under matched with/without-haptic conditions with nine participants across six contact-critical tasks, haptics improved success rates across all tasks (+2.2 to +15.6 percentage points), while completion-time effects were task-dependent. Subjective ratings showed significant gains in contact clarity and grasp confidence in both simulation and real-world settings (Wilcoxon signed-rank, $p<0.05$). We also integrate a lightweight depth-camera-based tactile proxy in Isaac Sim, enabling a full pipeline from multi-modal demonstration collection to visual-tactile policy training. Preliminary downstream validation by training visual-tactile policies from collected demonstrations shows tactile cues benefit contact-critical subtasks (peg-in-hole: +17 percentage points over vision-only).

0.63

Digital Twin-Driven VR Teleoperation with Multi-View Spatial Perception for Surgical Robots

cs.RO ·2026-09-22 ·Chang Liu, Chenhao Yu, Honghao Zhao, Hao Ding, Haochen Wei +3 more
published similarity 0.69
Abstract · 8 pages, 8 figures. Accepted to IROS 2026

Current robot-assisted minimally-invasive surgery (RMIS) platforms provide a fixed console for the surgeon to view stereo endoscopic images and teleoperate instruments inside the patient. Several researchers have proposed the use of a head-mounted display (HMD) as a portable console, with video pass-through rendering of the endoscope images which, like the fixed console, restricts the operator to a single endoscopic viewpoint and limits depth perception. We present a digital twin-driven virtual reality (VR) teleoperation platform, where the digital twin is created from markerless perception of the surgical environment and streamed for display on the HMD. This overcomes the limitations of video pass-through by providing multi-view rendering and natural motion-parallax cues, enabling decoupling of the user's hand posture from strict instrument alignment. The system utilizes VR hand controllers to increase the teleoperation workspace and to improve the robustness and stability of instrument control compared to the hand tracking approach adopted by most prior systems. A 15-participant user study on the da Vinci Research Kit (dVRK) shows that our VR platform significantly outperforms a state-of-the-art HoloLens 2 mixed reality baseline, reducing path length by 86% and jerk by 95%, while achieving depth perception confidence comparable to or exceeding the traditional console across all conditions.

0.41

Surgical Master Console Using General-Purpose Robot Arms and a Separable Articulated Distal Interface: Porcine In-Vivo Evaluation

cs.RO ·2026-09-27 ·Minsung Kim, Seonho Shim, Dongho Yee, Younghoon Noh, Juahn Oh +7 more
similarity 0.69
Abstract · Submitted to IEEE ICRA 2027

High-performance surgical master consoles offer intuitive articulated manipulation but are expensive and difficult to reproduce, while accessible commercial haptic devices lack built-in interfaces for surgical wrist articulation and continuous grasp. We present a laparoscopic master in which general-purpose robot manipulators provide the programmable base and surgical-specific interaction is concentrated in a separable distal adapter. Each 6-DoF arm carries a custom 2-DoF direct-drive wrist, continuous grasp sensing, and clutch-based workspace management; the complete bimanual hardware costs approximately US$5,500, below common bimanual commercial haptic references. To support sustained hand-guided use, we characterize current scaling, gravity, and break-away friction and use them for posture-dependent gravity compensation and motion-gated assistance, reducing continuous actuation and thermal loading. A common master state drives either Isaac Sim or an RCM-constrained dual-FR3 platform. Master-state publication to FR3 target update adds at most 8 ms, and tip tracking shows 0.31-0.66 mm mean delay-aligned residuals. In a porcine cholecystectomy experiment, five common operator-side metrics and hand/tip-speed distributions were compared descriptively with human in-vivo telemetry from 120 clinical Versius recordings of 99 cholecystectomy procedures; no interruption originated from the master console, and no abnormal clinical signs were recorded during the 7-day postoperative observation period. These results demonstrate a surgical master built from general-purpose robot arms with surgical-specific interaction concentrated in a separable distal interface.

0.32

DITTO-X: Forward and Reverse Teleoperation for Dexterous Manipulation and Human Intervention

cs.RO ·2026-09-30 ·Zhanpeng He, Joaquin Palacios, Zhangyu Wang, Chenhao Li, Katelyn Lee +3 more
similarity 0.68
Abstract

Teleoperated demonstrations are a primary source of data for robot manipulation, and teleoperated interventions are a primary mechanism for correcting policies at deployment. Yet most teleoperation systems close the loop through vision alone and are built around parallel-jaw grippers, limiting both what the robot can execute and what the operator can express through it. This is most damaging in shared autonomy, where the operator sees the scene only through occluded cameras and must take over a dexterous hand mid-task, often with an object already grasped. We present DITTO-X, a hand-agnostic dexterous teleoperation interface that renders joint-level force and fingertip contact events from sensing already on the robot hand, and drives three commercial dexterous hands (Sharpa, Wuji, and Inspire) without per-hand redesign. Because the exoskeleton is actuated, DITTO-X also supports reverse teleoperation, in which the robot back-drives the operator's fingers into its own configuration before control is transferred, so the human enters the loop already matched to the state they inherit. Our results show that DITTO-X improves demonstration quality and throughput over a commercial hand-tracking glove, both in regular data collection and in human intervention during policy deployment for contact-rich manipulation tasks. More information can be found from our website: https://tml.stanford.edu/ditto-x/.

0.41

Remote Surfaces at Your Fingertips: Electrovibration-Based Tactile Feedback for Robot Teleoperation via Touchscreen Interfaces

cs.RO cs.HC ·2026-08-22 ·Alperen Kenan, Juan José García Cárdenas, Adriana Tapus, Paul Bremner, Manuel Giuliani
published similarity 0.66
Abstract · 8 pages, 10 figures, accepted for presentation at the 2026 IEEE Conference on Telepresence in Bristol, United Kingdom, November 9-13, 2026

Enabling operators to perceive and interact with remote environments naturally is a fundamental challenge in robotic teleoperation. This is especially critical in tasks involving physical interaction, where real-time haptic awareness improves operational safety and effectiveness. Existing kinesthetic haptic feedback methods suffer from instability during rigid surface contacts and remain sensitive to communication delays, while visual cue-based force feedback imposes additional cognitive load and limits sustained situational awareness. This work presents a teleoperation interface that conveys remote surface interactions to the operator through electrovibration-based tactile feedback, enabling naturally mapped force reflection while avoiding the stability issues associated with kinesthetic feedback and the latency limitations of mechanical actuators. A user study (N=21) evaluated interface usability, sense of presence, and operator workload under two force reflection conditions: visual feedback and electrovibration-based tactile feedback. Characterisation experiments further assessed path-following accuracy and response time across both conditions. Results show that tactile feedback significantly reduced response time by 15.35% (p=0.002, d=0.96) and increased the sense of presence by 31% (p<0.001, d=0.90) compared to visual feedback, while imposing comparable workload and usability across both conditions. These findings demonstrate that electrovibration-based tactile feedback is a viable and effective modality for robot teleoperation, improving operator responsiveness and sense of presence in contact-rich manipulation tasks, with direct applicability to safety-critical domains such as nuclear maintenance.

0.20