CS Paper Radar

DITTO: Dexterous Interface for Transparent TeleOperation

Joaquin Palacios, Katelyn Lee, Cheng Zhang, Zhanpeng He, Matei Ciocarlie

cs.RO ·submitted 2026-09-16 01:12 UTC · v1

Abstract

Collecting data for manipulation with high-DOF hands is challenging, as interfaces must capture rich hand motion while rendering the contact interactions essential for precise manipulation. Existing data collection approaches face a trade-off: teleoperation ensures deployment consistency but lacks force feedback, while handheld (in-the-wild) systems provide natural force transparency but introduce a visual embodiment gap at deployment. We present DITTO, a Dexterous Interface for Transparent TeleOperation, which resolves this through the anatomically informed co-design of a dexterous 7-DOF robotic hand and a kinematically equivalent motorized exoskeleton. A 1-to-1 actuator mapping between the exoskeleton and robotic hand enables handheld (in-the-wild) data collection and bilateral teleoperation with joint-level force feedback unified in a single platform. We demonstrate that the DITTO exoskeleton spans the operator's natural index-to-thumb workspace, and showcase DITTO's dexterous capabilities via learned policies on contact-rich tasks.

Comment
8 Pages, 6 Figures, 4 Tables

Closest papers

Nearest neighbours by meaning across the whole index.

DITTO-X: Forward and Reverse Teleoperation for Dexterous Manipulation and Human Intervention

cs.RO ·2026-09-30 ·Zhanpeng He, Joaquin Palacios, Zhangyu Wang, Chenhao Li, Katelyn Lee +3 more
similarity 0.80
Abstract

Teleoperated demonstrations are a primary source of data for robot manipulation, and teleoperated interventions are a primary mechanism for correcting policies at deployment. Yet most teleoperation systems close the loop through vision alone and are built around parallel-jaw grippers, limiting both what the robot can execute and what the operator can express through it. This is most damaging in shared autonomy, where the operator sees the scene only through occluded cameras and must take over a dexterous hand mid-task, often with an object already grasped. We present DITTO-X, a hand-agnostic dexterous teleoperation interface that renders joint-level force and fingertip contact events from sensing already on the robot hand, and drives three commercial dexterous hands (Sharpa, Wuji, and Inspire) without per-hand redesign. Because the exoskeleton is actuated, DITTO-X also supports reverse teleoperation, in which the robot back-drives the operator's fingers into its own configuration before control is transferred, so the human enters the loop already matched to the state they inherit. Our results show that DITTO-X improves demonstration quality and throughput over a commercial hand-tracking glove, both in regular data collection and in human intervention during policy deployment for contact-rich manipulation tasks. More information can be found from our website: https://tml.stanford.edu/ditto-x/.

0.41

Now You Feel It, Now You See Me: Digital-Twin-based Teleoperation Interface for Dexterous Manipulation

cs.RO ·2026-10-04 ·Youngchan Shim, Kyutae Lee, JooYun Kim, Jaeseong Hwang, Harim Ji +1 more
similarity 0.77
Abstract · 8 pages, 5 figures, 4 tables

Teleoperation is becoming increasingly important for collecting high-quality demonstrations to teach robots dexterous manipulation skills. For dexterous manipulation, bare-hand tracking provides a practical way to control robotic hands and demonstrate coordinated finger movements without gloves or exoskeletons. However, this type of teleoperation faces two key feedback limitations: a lack of force feedback and visual feedback of occluded region. The absence of force feedback hinders precise and safe manipulation, as operators must infer contact force visually rather than feel them directly. Occlusion by objects or other robot parts impairs the assessment of hand positions, approach distances, and pre-grasp configurations suited to the object's shape. To address these limitations, we propose a digital-twin-based augmented reality (AR) teleoperation interface that integrates bare-hand tracking, bimanual robotic hands, and virtual representations of the robot and task objects. The interface renders tactile measurements on robot hand meshes as visuo-force feedback. Furthermore, it offers a user-controlled virtual view panel or occlusion-aware transparency rendering to provide occlusion-mitigating visual feedback. We evaluated the interface through user studies involving Task 1 and Task 2, examining how force visualization and visual assistance support demonstration collection in tasks requiring careful force regulation and manipulation under occlusion.

0.12

FOMI: A Force-Feedback Manipulation Interface for Teaching Contact-Rich Manipulation

cs.RO ·2026-10-14 ·Yishu Shen, Yiming Luo, Ruilin Wang, Bowen Yang, Shuai Yang +5 more
similarity 0.75
Abstract

Robot-free collection with handheld interfaces enables scalable acquisition of human demonstrations for policy learning. However, existing handheld interfaces often provide limited intuitive force feedback, making contact-rich demonstration collection challenging for human operators. To address this, we present FOMI, a force-feedback manipulation interface with a scissor-shaped mechanism, which transmits object interaction forces directly to the operator's hands through actuation links without force sensors. This intuitive force feedback supports real-time action adjustment during robot-free collection of contact-rich demonstrations. Around FOMI, we build a demonstration collection system that integrates sensor calibration, data acquisition, and synchronization for robot-free collection. By further mapping pose changes and gripper opening of FOMI to robot end-effector poses and gripper commands, the system also supports teleoperation. Across four contact-rich tasks, FOMI improves collection efficiency by approximately 29% and 18% over the best baselines in robot-free collection and teleoperation, respectively. Demonstrations collected with FOMI in both modes enable policies to perform challenging contact-rich manipulation tasks with high success rates.

0.32

M3-Tele: A Unified Multimodal Teleoperational Framework for Compliant Whole-Body Mobile Manipulation

cs.RO ·2026-09-07 ·Hengxiang Chen, Shenwen Deng, Yujian Ma, Gan Ma, Qiang Li +1 more
similarity 0.74
Abstract · 15 pages,12 figures,a under-review journal

Executing contact-rich tasks efficiently requires the seamless integration of whole-body coordination and physical compliance regulation. However, existing teleoperation and data-collection frameworks often overlook the joint consideration of multimodal perception and coordinated whole-body operation. This limitation can reduce the efficiency and quality of demonstration collection, thereby affecting the effectiveness of downstream policy learning. In this work, we present \textbf{M3-Tele}: A Unified \underline{M}ultimodal \underline{Tele}operational Framework for Compliant Whole-Body \underline{M}obile \underline{M}anipulation, enabling stable physical interaction and capturing aligned visual, tactile, force, and proprioceptive observations during task execution. Extensive experiments demonstrate that the proposed framework significantly improves contact-rich teleoperation performance. The proposed controller reduces the force tracking error from 4.132~N to 0.346~N, the contact loss from 2.46 to 0.02 events per trial and the tactile deformation error by 65\%. User studies across four mobile manipulation tasks also verify the reliability and usability of the proposed system. Furthermore, Diffusion Policy experiments highlight the value of joint tactile and force sensing.

0.22

The Missing Touch: Spatially Distributed Tactile Feedback Brings Teleoperation Closer to Human Dexterity

cs.RO ·2026-08-19 ·Rohan Kota, Gregory Reardon, J. Edward Colgate
similarity 0.73
Abstract

A fundamental challenge in robotic teleoperation is enabling an operator to control a remote robot as effortlessly and intuitively as their own hands. Despite the growing use of teleoperation to collect demonstration data for training autonomous robot policies, teleoperated robot performance still falls significantly short of human dexterity, even for basic tasks. Here, we present evidence that a key factor contributing to this performance gap is the absence of spatially distributed tactile feedback. Using a two-degree-of-freedom (DoF) bilateral force-feedback telemanipulator paired with a 32-DoF tactile fingertip display, we show that operator performance improves significantly when localized deformations on the remote manipulator are faithfully reproduced on the operator's fingertip. In a series of teleoperation tasks, reproducing distributed contact information not only accelerated task performance but also brought teleoperated movements closer to natural human behavior by minimizing corrective actions and task completion steps, thereby reducing the deviation between teleoperated and natural trajectories by 29$\unicode{x2013}$79%. Furthermore, we found that increasing the resolution of the tactile feedback$\unicode{x2014}$by refining how finely the measured displacements were quantized for reproduction$\unicode{x2014}$compressed the state-space distribution of teleoperated motions, which has been associated with improved training outcomes for autonomous robot policies. Together, these results suggest that spatially distributed tactile feedback is essential for closing the gap between human and teleoperated dexterity and training the next generation of autonomous robots.

0.30

DEX-PHD: A Dexterous Portable Handheld Device for Multimodal Data Collection

cs.RO ·2026-10-26 ·Jooyoung Hong, Noboru Myers, Obin Kwon, Yixian Yang, Joohyung Kim
similarity 0.73
Abstract

Existing manipulation data collection methods typically offer either accurate robot-state acquisition through kinematic-chain-based teleoperation or convenient, portable operation through vision-based approaches. We present DEX-PHD, a portable handheld device that combines these advantages for dexterous manipulation by integrating a dexterous robot hand, continuous per-finger control, and multimodal logging. The system records proprioceptive information, fingertip contact data, and wrist-camera video, while the operator directly controls the robot hand through joint-level mapping. Its untethered design enables data collection across diverse environments. We demonstrate DEX-PHD on contact-rich tasks requiring coordinated multi-finger manipulation and deploy the collected demonstrations through open-loop replay on a physical humanoid robot. The results show that open-loop replay preserves the main temporal patterns of finger motion and task-relevant contact. Therefore, DEX-PHD provides a practical platform for portable, multimodal dexterous manipulation data collection.

0.39

DexPort: A Hand-Held Skill Interface for Dexterous Hand Data Collection

cs.RO cs.AIcs.LG ·2026-10-23 ·Amber Xie, Jiawei Fu, Xiaofeng Guo, Carmelo Sferrazza, Guanya Shi +1 more
similarity 0.72
Abstract · Website: https://amberxie88.github.io/dexport/

Collecting high-quality demonstrations remains a central bottleneck for learning dexterous manipulation. Teleoperation records executable robot actions, but it requires a complete robot setup and places the burden of coordinating many finger joints on the operator. Human demonstrations are easier to collect, but their motions must be estimated and retargeted to the robot, and they do not directly provide robot actions. In this paper, we introduce DexPort, a portable data-collection interface for high-DoF robot hands. It uses the same hand hardware for collection and deployment, avoiding a hand embodiment gap, and records both commanded joint targets and measured joint states. Our key observation is that a small set of skills can support a wide range of dexterous tasks. During collection, the operator moves the hand-held interface to specify the robot wrist motion and selects or adjusts skills that coordinate the finger motion. This removes the need to control each joint independently while retaining behaviors such as precise grasping and in-hand manipulation. We collect demonstrations across several real-world tasks and in unstructured environments without a robot arm. We then use behavior cloning to train visuomotor policies directly on the recorded wrist motions and hand commands, without skill labels. We evaluate across 4 tasks: pick-and-place with diverse objects, screwing with in-hand tool use, drawer stowage which requires simultaneous grasp and pulling, and a bimanual scanning task. We collect over 2,500 demonstrations with our portable device, in both laboratory and in-the-wild settings. Across our tasks, we see an improvement from 11% to 64% when using recorded robot commands instead of states, and an improvement from 36% to 78% for task success when using in-the-wild data.

0.40

RUMI: A Robotiq-Matched Universal Manipulation Interface for Robot Learning with Augmented Reality and Haptic Feedback

cs.RO cs.AI ·2026-11-11 ·Kevin Avdiu, Seongjin Bien, Yannik Blei, Philine Meister, Johannes Hechtl +4 more
similarity 0.72
Abstract

Many manipulation tasks require carefully controlled contact forces for successful execution, yet large-scale, force-aware datasets remain scarce. Handheld interfaces can help by transmitting interaction forces directly through the operator's arm, but most existing designs are tailored to simple linear grippers and do not match the nonlinear mechanics of widely used robotic grippers. We present RUMI, a handheld universal manipulation interface matched to the Robotiq 2F-85 with exchangeable fingertip sensors that preserves the target gripper geometry while enabling natural input before contact and force measurement after contact. By integrating the tracking system into a virtual reality headset, our method provides real-time augmented reality feedback about the kinematic feasibility of motion on the target robot platform. We further introduce a haptic feedback mechanism that supports force-aware teleoperation for simulated and real robots. A user study shows fewer episodes containing joint-limit violations with live robot visualization and pose initialization (3/50) than without augmented reality (16/50). We additionally train imitation policies from demonstrations, collected using two different fingertip modalities enabled by the gripper-matched hardware, and assess the haptic interface's capability for collecting force-aware teleoperation datasets in simulation.

0.04