CS Paper Radar

Thread Scaling of Hexaly on the TDVRPTW across Two Model Encodings. An Experimental Report: Binding Choice, Slice-Count Choice, and Two Thread Ladders

Florian Rascoussier

cs.DC math.OCcs.MS ·submitted 2026-08-10 18:00 UTC · v3

Abstract

Thread scaling in Hexaly on the Time-Dependent Vehicle Routing Problem with Time Windows (TDVRPTW) depends on modeling, and on the language binding through which the model reaches the solver. We compare two encodings, both reaching the solver through its C++ binding: one evaluates continuous travel-time functions exactly through external callbacks, which that binding evaluates concurrently, while the other approximates them with time slices evaluated natively by the solver. Independent CPU accounting confirms that both use the cores they are allocated, but they respond differently to width. The external-function encoding stabilizes, reducing its seed dispersion by about 30% up to 8 threads before widening again, yet its pooled quality barely moves, because nine of the ten instances improve while the hardest one degrades by enough to cancel them. For the time-sliced encoding we first select a discretization on feasibility under the original travel-time functions rather than on approximation error, and the retained setting then improves monotonically with the thread count, gaining about a quarter of its final gap and reducing the seed dispersion by nearly half between 1 and 16 threads. At equal single-threaded budget the two encodings are close, and the small pooled edge of exact evaluation comes from that same hardest instance, so the practical advantage of the discretization is thread scaling rather than fidelity traded for speed. These descriptive results support multi-threading as a way to improve solution quality and stability when the model can exploit it, and they show that binding-level constraints on external evaluation must be measured, not assumed.

Comment
v3: 22 pages. Corrected author lists in KAYROS, MAMUT-routing and Poryos2026 references. No new experiments or changes to results. Raw experiment data deposited at https://doi.org/10.5281/zenodo.22047134

Closest papers

Nearest neighbours by meaning across the whole index.

TicTacBench: Benchmarking Timing Closure Capabilities of Coding Agents

cs.AI ·2026-09-20 ·Bowei Wang, Zhigang Fang, Zhijie Yang, Renzhi Chen, Shanshan Li +1 more
publishedbenchmark similarity 0.60
Abstract · Accepted at ICCD26

Recent advances in large language models (LLMs) have led to the emergence of coding agents capable of performing complex engineering tasks, including register-transfer level (RTL) design and optimization. Existing RTL benchmarks mainly evaluate functional correctness and performance, power, and area (PPA) of the generated RTL designs, leaving agents' ability for \emph{timing closure} under-evaluated. We propose TicTacBench, a benchmark specifically designed to evaluate coding agents' capabilities for RTL-level timing closure under post-place-and-route (post-PnR) evaluation. TicTacBench contains 30 diverse tasks, each provided with a suboptimal RTL design, realistic timing constraints, functional equivalence verification, and timing reports. With over 300 runs of coding agents driven by 8 frontier LLMs, we find that even the best agent can only close 53.3\% of tasks with 7.18\% area-delay product (ADP) degradation and 8.83\% energy-delay-squared product (EDDP) improvement on average. We identify common failure categories that explain why agents fail to close timing. Then we propose TicTacSkill, a new method that guides agents to follow standard timing-closure procedures and improves the Timing Closure Rate by 9\%. These results suggest that while coding agents have made significant progress in RTL design, their timing-closure capability still has substantial room for improvement.

0.30

KAYROS: An Anytime and Exact Solver for the Time-Dependent Vehicle Routing Problem with Time Windows - Extended Version

cs.MS math.OC ·2026-09-01 ·Florian Rascoussier, Romain Billot, Lina Fahed, Christine Solnon
theorycode/data similarity 0.60
Abstract · v3: 93 pages, 4 figures, 12 tables. Updated authorship, affiliations, ORCID identifiers, acknowledgements and references. No new experiments…

The Time-Dependent Vehicle Routing Problem with Time Windows (TDVRPTW) captures a central difficulty of urban logistics: travel times vary with the time of day, so the cost of a route depends on when it is driven. This paper introduces KAYROS, an open-source solver for the duration-minimization TDVRPTW that is both anytime and exact. It returns improving valid solutions throughout its time budget and can close instances with conditional computational optimality certificates through an integrated branch-price-and-cut component. We extend the composition of continuous arrival-time functions from the literature, previously described only at proof or proposition level, to the left-continuous functions that stepwise benchmarks require. We prove that the composition routine shipped in the checker computes that operation exactly. We analyze when its evaluation and breakpoint normalization are exact in IEEE-754 double-precision arithmetic, and argue that a canonical, epsilon-free checker must define the objective. The anytime layer combines greedy construction, granular time-dependent local search over balanced route trees, and iterated local search, with a fleet-aware descent for a fleet-cost objective. We further propose an anytime evaluation methodology based on a normalized signed primal integral under a pre-committed statistical design. On 212 instances from five families at a one-hour single-threaded budget, KAYROS achieves a pooled anytime score 63.3% lower than the strongest of three available contenders (Timefold, Hexaly, jsprit). All three contrasts are significant under Holm correction. KAYROS improves all 30 high-effort references of Blauth et al. and 10 literature best-known solutions, and publishes 704 such certificates. The solver, benchmarks and campaign data are openly released.

0.32

TableTune: Measured, Self-Correcting Draft-Length Tables for Dynamic Speculative Decoding

cs.ET cs.AI ·2026-10-28 ·Abhishek Malvankar, Paul Castro, Nick Mitchell
similarity 0.58
Abstract

Speculative decoding speeds up large language model (LLM) serving only while the GPU has spare compute, so the best draft length, the number of tokens a small drafter guesses per step, shrinks as the batch grows. vLLM lets operators set the draft length for each batch size with a hand-written table, but nothing measures or corrects that table. We present TableTune. Its tuner times the decoding step for every batch size and draft length on vLLM's own serving path and computes, in minutes, the table that maximizes throughput. Its controller, a vLLM plugin, tracks how many guesses are accepted in live traffic and rebuilds the table while serving. We measure TableTune only against other ways to speculate. On an H100, the tuned table delivers at least 94% of the throughput of the best fixed draft length at every load in four of five drafter settings (88% in the fifth) without the operator having to know which length that is. Against reimplementations of TurboSpec- and Nightjar-style control on the same engine, its worst-case loss is never higher than theirs, and with the EAGLE-3 drafter it is 3% against 9% and 12%. On a mixture-of-experts model, vLLM's documented table loses up to 18% and the tuned table at most 3%. Starting from mistuned tables, the controller raises throughput by up to 58% (up to 45% on vLLM's default runner), and after a workload switch with the DFlash drafter it recovers 96% of a stale table's loss. In llm-d's optimized-baseline deployment as shipped, two Qwen3-32B replicas on four GPUs, the tuned table is up to 32% faster than a fixed draft length of 3 and up to 25% faster than vLLM's documented table at high load, and the controller raises the documented table's throughput by up to 29%.

0.31

Prefetch-Steered Routing: Deterministic Cache-Aware Expert Selection for Offloaded Mixture-of-Experts Decoding

cs.AI ·2026-10-26 ·Siming Huang
benchmark similarity 0.57
Abstract

When a Mixture-of-Experts (MoE) model does not fit in GPU memory, batch-1 decoding is dominated by copying expert weights from host memory. Cache-aware routing reduces these copies by biasing the router toward resident experts, but combined with asynchronous prefetching it makes the model's outputs depend on transfer timing, so a harness that does not simulate that timing no longer evaluates the deployed model. We propose prefetch-steered routing (PSR): routing conditions on a deterministic logical cache, into which at most n experts predicted by the next layer's router are inserted per layer and token; physical copies affect only latency. On OLMoE-1B-7B with 50% and 25% of experts resident on an RTX 4090, PSR decodes 2.2-2.3x faster than exact routing with LRU and 25-30% faster than the Cache-Prior operating point, with mean benchmark differences of +0.1 and +0.5 points (95% lower bounds -0.8 and -0.3). In greedy generation its lead over Cache-Prior depends on the workload and reverses on HumanEval at 50% residency. On Moonlight-16B-A3B, PSR is 1.9x faster than exact routing with LRU at 37.5% residency and, at the latency of Cache-Prior, significantly better on three of eight benchmarks. On Qwen3.6-35B-A3B, where copies are cheap relative to computation, PSR keeps its advantage over Cache-Prior on the likelihood benchmarks but not its speed. Distillation-trained gates did not help. Speculative decoding with block-level expert selection was slower than PSR with a 1B autoregressive drafter on OLMoE, but with a block drafter on Qwen3.6 it was 2.1-2.9x faster than any autoregressive configuration with at most its GPU memory on the 64 prompts we timed.

0.19

What Sets the Serving Speed of Looped Language Models? Measurements and Optimizations Graded by Exactness

cs.DC ·2026-11-03 ·Dezhen Lu, Runguo Li, Zixiang Ni, Yuchen Tang, Xingquan Kong +3 more
code/data similarity 0.57
Abstract · 16 pages, 3 figures, 10 tables. Appendix included

Looped language models apply one block of layers many times per token, so a serving engine pays every per-layer overhead once per loop; we measure serving for Ouro and Huginn-0125 in an open-source looped-model engine and grade our optimizations from bitwise-identical changes to those that require an accuracy check. At batch 1, fusing all loop submissions leaves Ouro throughput at 0.99x; the 5689 small kernels per token are the real cost, and fusing them behind rounding fences raises throughput 1.11-1.59x while 1014/1014 requests remain identical. An approximate fusion is no faster and misses a one-point GSM8K rule on 87 questions (61 and 62 correct versus 64), so we do not ship it. Huginn's released defaults avoid dead KV slots, reuse prefix-cache pages, and serve 1.77-3.16x faster than the base engine; Ouro reaches 1.65-2.15x and agent sessions 1.91-3.21x, while Huginn's noise and prefix-reuse changes stay within one point on all 1319 Huginn test questions; Huginn's packed prefill, -0.61 points on the same questions, meets that rule only on its point estimate. Position-keyed noise makes CPU cache reuse exact but still leaves 20 of 128 GPU full hits different, while loop fusion delays prefill admission and a 64-graph cache prevents eager fallbacks. Under prefill-decode disaggregation ExactLoop reaches up to 3.3x the base throughput with peer error handling disabled, and 3.1x in two of three runs with it enabled. Its transfer budget, sized to hold one request's KV in flight, cuts the commit tail from about one second under the earlier budget to 16 ms (base: 2.8 s), removing the polling rounds that the engine's interval would otherwise impose.

0.38

Context-Aware Precision Scheduling for Small Language Models

cs.LG ·2026-10-11 ·Mukund Athmaram, Manoj Rao, Liang Ma
benchmarkposition similarity 0.56
Abstract

Small language models (SLMs) used as on-device agents must balance accuracy and latency as their context grows. Mixed precision helps manage this tradeoff by assigning different precisions to weight tensors according to their size and sensitivity. However, these choices depend on the operating conditions, so a configuration selected for a short context may no longer provide the best tradeoff at a longer one. We calibrate a timing model from measurements at different precisions and context lengths, and combine it with tensor sensitivities to choose configurations under a latency or accuracy budget. We argue that fewer bits do not always mean faster execution, so our predictor estimates latency from calibrated execution costs rather than weight bytes alone. Under a latency budget, reading the larger key-value (KV) cache leaves less time for weight operations, leading the allocator to select lower precisions. This gives a schedule of tensor changes that can be prepared before execution. Our runtime follows the schedule while retaining the session's KV cache. We evaluate executed schedules on a laptop GPU, including a longer-context schedule with three weight formats and a tool-use benchmark measuring full response time and correctness. Under an accuracy budget, measured error from a quantized KV cache determines the budget left for weights. The allocator can raise or lower weight precision as this estimate changes. These experiments show where context-aware precision helps and where accuracy recovery remains limited.

0.18

Where Activation Sparsity and KV-Cache Sparsity Cross in LLM Decoding

cs.LG cs.CLcs.PF ·2026-09-27 ·Jungseob Lee, Seungyoon Lee, Seongtae Hong, Sugyeong Eo, Heuiseok Lim
code/datahighly cited similarity 0.56
Abstract · 22 pages, 6 figures, 17 tables

At each step, decoding one sequence with a large language model rereads the projection weights, whose traffic is fixed, and the key-value (KV) cache, whose traffic grows with context. Activation sparsity trims the first term and KV-cache sparsity the second, yet their reported speedups are hard to compare because each depends on context length and on the dense attention kernel it is measured against. We derive a byte crossover, the context length at which the two savings are equal, together with ideal speedup bounds for each branch and for their composition, from model dimensions and keep ratios alone. We then time both branches and their composition from 2K to 128K tokens on two GPUs after a dense prefill of real text, with dense and sparse modes reading the cache through the same split-K attention kernel. The projection branch leads at short context and the KV branch at long context, with speedups that follow their byte bounds up to fixed kernel costs. Adding these costs, measured in separate sweeps, lets the byte account predict the measured crossings of three keep-ratio pairs, a second model, and a second GPU to within 4.1K tokens. Timing the dense baseline with masked instead of split-K attention inflates the apparent speedup of the same KV policy about fivefold. An attention-scored KV selection answers the same passkey and multi-key placements as dense decoding up to 127K tokens, whereas a KV window misses most of them. Under matched perplexity budgets, activation sparsity composed with this selection decodes 14 to 26% faster than the best single branch on both GPUs. Code is available at https://github.com/js-lee-AI/ByteCross.

0.57

Hand-Written PTX Tensor-Core GEMM Kernels: A Multi-Precision Study on NVIDIA L4

cs.DC cs.AI ·2026-08-10 ·Matt J. Borowski, Blazej Osinski
code/data similarity 0.56
Abstract · 10 pages, 6 figures, 12 tables. Code and profiling data: https://github.com/MattJBorowski1991/TensorCorePTX (archived: https://doi.org/10.52…

High-performance Tensor Core kernels rely on a low-level PTX pipeline built from asynchronous data movement with cp.async, warp-level matrix loads with ldmatrix, and matrix multiply-accumulate operations with mma.sync. However, most application code accesses Tensor Cores indirectly through the WMMA C++ API. This paper asks a focused, practical question: when does replacing WMMA with hand-written PTX actually pay off? To answer this question, we conduct a controlled, single-GPU study on an NVIDIA L4 GPU (Ada, SM89), comparing double-buffered WMMA baselines with a family of hand-written PTX GEMM kernels across FP16, INT8, and INT4 arithmetic and square problem sizes from $N=512$ to $N=8192$. Every kernel is profiled with Nsight Compute across the full metric set, and PTX speedups are reported relative to the corresponding same-precision WMMA baseline. Hand-written PTX provides no end-to-end speedup for FP16, because its instruction-level gains are offset by operand-packing overhead. In contrast, the PTX kernels achieve consistent speedups of 1.4x-1.8x for INT8, driven primarily by lower instruction counts and better global-memory coalescing, and 2.9x-4.3x for INT4, where native mma.sync.m16n8k64.s4 execution avoids the software-emulated sequence used by the WMMA path. Relative to the FP16 WMMA baseline, the best quantized kernels reach 34.4x (INT8) and 98.7x (INT4) at $N=8192$. Across these experiments, occupancy is a poor predictor of throughput. For large matrices, performance instead tracks memory-system behavior -- particularly global-load coalescing and DRAM-active cycles -- more closely than Tensor Core utilization. These results identify the precisions and operating regimes in which the additional complexity of hand-written PTX is justified.

0.30