CS Paper Radar

Spatio-Temporal Scheduling for Robust and Efficient Multi-Transmitter Wireless Power Transfer

Yuna Sawada, Shino Shiraki, Nobuyoshi Kikuma, Takahiro Matsuda, Takefumi Hiraguri, Kazuki Maruta, Tomotaka Kimura

cs.NI ·submitted 2026-08-11 02:40 UTC · v1

Abstract

In multi-user wireless power transfer (WPT), scheduling schemes that determine the allocation of transmission resources among receivers play a crucial role in improving power transfer efficiency. Scheduling can be classified into time-division (TD) and space-division (SD) schemes, with the transmission order and direction designed to control when and to whom power is delivered. TD-WPT can exploit the nonlinear characteristics of rectennas by concentrating power in time; however, a system relying on highly directional transmission from a single location reduces robustness under time-varying channel conditions. This study investigated the effectiveness of spatio-temporal scheduling in coordinated multi-transmitter WPT systems. By employing multiple transmitters, the proposed method is robust against channel variations in delivering power. Moreover, coordinated beamforming among transmitters exploits inter-cluster interference. Simulation results demonstrate the potential of the proposed scheme for robust and efficient power supply, even under shadowing conditions.

Comment
6 pages, 5 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Spatial Reuse in Multi-Cell Pinching-Antenna Systems

eess.SP ·2026-11-05 ·Zhenqiao Cheng, Chongjun Ouyang, Zhiguo Ding
similarity 0.58
Abstract · 13 pages

In this paper, spatial reuse in a multi-cell pinching-antenna system (PASS) is investigated, where each cell employs a dielectric waveguide with one activated pinching antenna (PA) to serve a single user. Spatial reuse refers to the simultaneous use of the same time-frequency resource block (RB) by multiple spatially separated cells. Due to inter-cell interference (ICI), simultaneous transmission by all cells on the same RB may be infeasible, and multiple RBs may be required to serve all users. The spatial-reuse capability is thus characterized by the minimum number of RBs required to satisfy all users' signal-to-interference-plus-noise ratio (SINR) targets under per-cell power budgets. Flexible PA placement can enhance the desired-link gain of each user and reduce the required transmit power of its serving cell, which in turn mitigates ICI and allows more cells to share the same RB. To exploit these benefits, a joint optimization problem of RB allocation, PA placement, and power control is formulated. For the two-cell case, the globally optimal PA placement is determined by minimizing the peak transmit power required by the two cells. A one-dimensional special case is further analyzed to derive analytical expressions for the average RB requirement and its scaling laws with respect to cell length under different PA-placement strategies. For the general multi-cell case, the optimal two-cell solution is exploited to construct a weighted compatibility graph, whose edge weights represent the minimum peak transmit powers required for feasible pairwise RB reuse. Based on this graph, a greedy RB allocation algorithm with minimum-weight pair initialization and element-wise PA-placement optimization is developed. Numerical results validate the analytical findings and demonstrate that PASS significantly reduces the required RBs compared with conventional fixed-antenna systems.

0.30

Leveraging Movable-Element STARS for RSMA-SWIPT Under Practical System Imperfections

eess.SP ·2026-09-24 ·Muhammad Asif, Asim Ihsan, Irfan Muhammad, Zhu Shoujin, Mikael Gidlund +1 more
benchmark similarity 0.58
Abstract · 14 pages, 9 figures

We study a robust multiuser framework for simultaneous wireless information and power transfer (SWIPT), where rate-splitting multiple access (RSMA) is integrated with a movable-element simultaneously transmitting and reflecting surface (ME-STARS). By allowing the STARS elements to change their positions in addition to controlling the reflection and transmission coefficients, the proposed architecture provides additional spatial flexibility for improving the cascaded channels toward users in both regions. Meanwhile, RSMA is employed to manage multiuser interference, while power-splitting receivers enable simultaneous information decoding and energy harvesting. The system design further accounts for channel state information (CSI) uncertainty, residual transceiver hardware impairments (HIs), and the nonlinear characteristics of practical energy-harvesting circuits. Accordingly, a robust sum-rate maximization problem is formulated by jointly designing the BS precoders, common-rate allocation, ME-STARS reflection/transmission coefficients, power-splitting (PS) ratios, and movable-element positions. The resulting formulation is highly non-convex because the movable-element positions affect the cascaded channels non-linearly and are tightly coupled with the remaining design variables. To obtain a tractable solution, the joint design is decomposed into active beamforming, passive beamforming, movable-element positioning, and PS-ratio optimization blocks, which are updated iteratively through suitable convex reformulations. Numerical results show that the proposed framework delivers higher sum rates than the considered benchmark schemes, exhibits robust behavior under CSI uncertainty and residual HIs, and achieves stable convergence across the considered system configurations.

0.16

Harvesting-Aware Routing for Low-Latency Reliable Transmission in Interference-Powered Networks

cs.NI ·2026-10-09 ·Azadeh Sheikholeslami, Allan Nguyen
similarity 0.55
Abstract

We consider a multi-hop wireless network where energy-harvesting nodes rely solely on ambient radio-frequency interference as their power source. The goal is to deliver a packet from source to destination with minimum latency while guaranteeing a target end-to-end outage probability under Rayleigh fading. This gives rise to a joint routing and power allocation problem in which interference plays a dual role: it provides harvestable energy, but also impairs link reliability. We first transform the intricate, multiplicative end-to-end outage constraint into an additive form. Then, we propose two optimal algorithms. The first, HOPE, minimizes the bottleneck harvesting latency, i.e., the longest energy-accumulation time along the path, by reducing the problem to a least-cost path computation on a graph with interference-aware link weights. The second, THOPE, extends the objective to total end-to-end latency, adding the cumulative transmission delay, and likewise admits a closed-form least-cost path solution. Both algorithms are solved in polynomial time via Dijkstra's algorithm and yield explicit expressions for the optimal transmit powers. Extensive simulations reveal that HOPE and THOPE reduce the average total latency by up to an order of magnitude compared with shortest-path and minimum-energy benchmarks, while exhibiting sharply concentrated delay distributions that are largely insensitive to interferer density.

0.23

Det-5G: Closing the Determinism Gap in 5G-Advanced for Industrial Closed-Loop Control

cs.NI ·2026-09-07 ·Adnan Aijaz
published similarity 0.55
Abstract · Accepted for publication in the IEEE Next Generation Communications (NextGCom) conference 2026

The ultra-reliable low-latency communication (uRLLC) capability of 5G has created significant opportunities for industrial wireless connectivity, yet widespread use of cellular networks for closed-loop control remains challenging. Closed-loop control requires more than low packet latency and high reliability: cyclic command/feedback exchanges must complete within predictable time bounds despite changing channel conditions, recovery transmissions, mobility, and multi-device contention. This paper introduces Deterministic-5G (Det-5G), a unified radio resource allocation framework for industrial closed-loop control. Det-5G treats the complete bidirectional control cycle as the scheduling object and combines coordinated downlink/uplink allocation, adaptive bundled transmissions, group-oriented downlink communication, and optimized multi-user uplink scheduling over 5G air-interface. Its performance is evaluated through a combination of closed-form analysis and Monte Carlo scheduling experiments, with comparisons against conventional dynamic grant-based scheduling, semi-persistent scheduling/configured grant operation, and fixed proactive repetition. The evaluation shows that Det-5G improves predictability of cycle completion, maintains the target reliability under changing link conditions, and scales more effectively to multi-device control than conventional reactive scheduling, while adapting radio resource use instead of continuously provisioning for the worst case as in fixed repetition. These characteristics make cycle-oriented scheduling a pragmatic solution for reducing the determinism gap that limits the use of 5G for closed-loop control in different verticals, especially as it evolves through 5G-Advanced toward 6G.

0.32

Minimizing Energy Consumption based on Waste Factor in Multi-user Multi-relay Systems

eess.SP ·2026-10-03 ·Nurullah Sevim, Mostafa Ibrahim, Sabit Ekin, Theodore S. Rappaport
similarity 0.55
Abstract · Submitted to IEEE Transactions on Green Communications and Networking for review

The escalating energy demands of modern wireless networks make energy-efficient system design a central challenge for future 6G deployments. Relay-assisted communication has long been recognized as a powerful tool for improving coverage and throughput, tracing its roots to early repeater communication systems and the foundational relay channel models in information theory. Meanwhile, modern relay selection and routing strategies are primarily driven by rate-based or transmit-power-centric metrics, which often neglect hardware-level losses that is independent of the transmitted signal. As networks grow denser and more heterogeneous, signal-independent hardware inefficiencies and circuit power consumption increasingly dominate the total energy consumption and fundamentally alter the optimality of relay assignment decisions. To address the challenge of modeling signal-independent power consumption in relay-assisted systems, the Waste Factor (WF) framework is adopted: a hardware-aware, unifying metric that explicitly captures signal-independent power losses across cascaded transceivers and wireless channels. Using WF, the energy consumption of multi-user, multi-relay wireless systems is quantified and minimized under practical hardware and network constraints. The formulation jointly accounts for component inefficiencies, propagation losses, and relay-selection constraints. The proposed framework demonstrates that the WF formulation provides a fundamentally new way to model relay-assisted communication, enabling hardware-aware energy-per-bit minimization and a structured representation that enables computationally efficient analysis. Simulation results confirm that WF-based relay assignment reduces total energy per bit while improving the ability of users to satisfy minimum received-power requirements, outperforming conventional formulations across both metrics.

0.26

Energy Efficiency Optimization for 5G NR PDSCH: A Cross-Layer Link Abstraction Framework

eess.SP ·2026-10-04 ·Jaebum Park, Chan-Byoung Chae, Robert W. Heath
similarity 0.54
Abstract · 6 pages, 4 figures

Energy efficiency (EE) optimization for cellular links often assumes Shannon-capacity transmission. The 3GPP New Radio (NR) physical downlink shared channel (PDSCH), however, delivers a transport block whose size is fixed by the modulation and coding scheme (MCS), the rank, and the resource allocation chosen by the scheduler. The transport block must also meet a target block error rate (BLER). In this paper, we optimize EE for the NR PDSCH with the standard transport block size as the throughput and the target BLER as the constraint. Exponential effective signal-to-noise ratio (SNR) mapping (EESM) turns the BLER constraint into a convex per-subcarrier power constraint. We derive a closed-form waterfilling-like power allocation and an EE-maximizing MCS selection rule. With a single calibration parameter per MCS, fitted offline over 3GPP tapped delay line C (TDL-C) channels, EESM predicts the BLER without per-realization link-level simulation. Numerical results show that a Shannon-capacity baseline overestimates the EE of equal-power transmission by 1.5 to 1.7 times at high SNR within the transmit power budget.

0.26

Power from Space: Coordinated Satellite Charging for Off-Grid Wireless Systems

eess.SP ·2026-08-26 ·Osmel M. Rosabal, Amirhossein Azarbahram, Mateen Ashraf, Mohammad Shehab, Abdul Basit Khattak +2 more
published similarity 0.54
Abstract · 7 pages, 4 figures, 2 tables, submitted to IEEE Internet of Things Magazine

Satellite-enabled wireless power transfer (WPT) may be a transformative solution for charging Internet of Things (IoT) devices in off-grid scenarios where traditional technologies struggle to efficiently meet urgent energy demands. In this article, we review the advantages and limitations of microwave-based long-distance charging for satellite-enabled WPT. We then introduce our vision of coordinated space-based WPT, where multiple satellites jointly serve networks of ground devices. Potential use cases are presented highlighting application requirements. We evaluate the average received power at the target locations using two coordination schemes and perform a statistical characterization of the power spillover on undesired locations. We also shed light on the performance of inter-satellite laser WPT for different operating distances and transmit-receive apertures of the peer satellites. Moreover, we explore the integration of metasurfaces on satellite apertures and ground networks to boost energy conversion efficiency, scalability, and beam management. Finally, we outline relevant challenges and research directions towards implementing our vision.

0.36

Multi-Stream Spatiotemporal Channel Coding for MIMO Systems: Transmission Scheme Design and Achievable Rate Optimization

eess.SP ·2026-09-09 ·Liang Jin, Xiaodong Xu, Shujun Han, Xiaoyu Chi, Ping Zhang +1 more
top venuebenchmark similarity 0.54
Abstract

Spatiotemporal channel coding (STCC) can improve the achievable rate over traditional temporal channel coding (TCC) by leveraging spatial degrees of freedom to extend the codeword length. Although several information-theoretic foundations on STCC have been established, the investigation of transmission schemes from a communication-theoretic perspective remains in its early stages. This paper proposes a multi-stream over multi-subchannel STCC (STCC-MSC) under full channel state information assumption and optimizes its achievable rate in the finite blocklength regime. We first formulate the transmission architecture of STCC-MSC in a point-to-point MIMO system, which introduces a stream-subchannel matching mechanism. We then maximize the achievable rate of STCC-MSC by jointly optimizing the subchannel assignment and power allocation strategies, which is formulated as a mixed-integer-nonlinear-programming problem. Next, a penalized alternating convex approximation (PACA) algorithm is proposed to solve this problem. Subsequently, we extend the point-to-point STCC-MSC designs to the more general multi-user MIMO systems, including both uplink and downlink scenarios. Finally, simulation results indicate that the PACA algorithm achieves a 9.85% rate improvement over the benchmark algorithm within the STCC-MSC scheme. Furthermore, the joint STCC-MSC-PACA scheme improves the achievable rate by 28.68% over TCC scheme.

0.33