CS Paper Radar

EM-Guided Graph Learning for Fluid Antenna Beamforming under Current-Domain Constraints

Yuanhui Wu, Hao Jiang, Zaichen Zhang

cs.IT ·submitted 2026-08-13 13:57 UTC · v1

Abstract

Fluid antenna arrays (FAAs) reconfigure a finite set of radiating ports within a prescribed aperture. In compact apertures, however, channel-driven placement may cluster ports, strengthen mutual coupling, degrade radiation conditioning, increase source-voltage demand, and produce uneven current loading. This paper studies downlink multi-user beamforming with jointly optimized port placement and current-domain transmission. An electromagnetic-guided graph network predicts port layouts from channel observations and refines them using geometric and mutual-impedance information. The training objective jointly considers communication performance and electromagnetic feasibility, while a common evaluation procedure is applied to all methods. The results show that, under a common feasibility standard, the proposed method provides a controllable tradeoff among communication rate, current loading, and configuration latency.

Closest papers

Nearest neighbours by meaning across the whole index.

Impedance-Aware Zonal Port Activation for Fluid Antenna Arrays

cs.IT ·2026-08-13 ·Yuanhui Wu, Hao Jiang, Zaichen Zhang
similarity 0.65
Abstract

Fluid antenna array (FAA) activation jointly determines the effective multi-user channel for precoding and the sparse physical aperture. Channel-oriented selection can concentrate high-gain ports and erode aperture quality, whereas geometry-oriented selection does not adapt to instantaneous channel state information (CSI). This paper formulates finite-port FAA activation as a rate--aperture--feasibility problem under an exact RF-chain budget. We propose impedance-aware zonal port activation (IA-ZPA), which couples compact CSI-conditioned port scoring with a checkerboard feasibility projection and inference-time mutual-impedance-aware selection. The learned scorer ranks ports, while the deterministic rule fixes the active aperture; a separate current-domain RZF backend then evaluates source-drive feasibility. Under a common induced-EMF protocol, IA-ZPA attains the largest constrained rate among the methods satisfying the prescribed mean-PSLL target with a substantially lower decision time than greedy selection.

0.32

Learning Representative Port Subsets for Efficient Fluid Antenna Systems

cs.IT cs.LG ·2026-10-24 ·Quan Zhou, Ming Zeng
similarity 0.64
Abstract

Fluid antenna systems (FASs) provide many candidate ports, but probing all ports for each channel realization incurs substantial online overhead. We study a complementary offline problem: compress the candidate-port space once and reuse the compressed set across future channel realizations. The method collects optimal ports from sampled training realizations, requiring only one scan of the candidate ports per realization. On a DeepMIMO 7-by-7 FAS with 49 candidate ports, 120 training realizations yield 27 representative ports on average while retaining 99.995% of the channel power gain achieved by exhaustive port selection.

0.18

Fast Tri-Hybrid Beamforming via Deep Unfolding

eess.SP ·2026-08-27 ·Pinjun Zheng, Md. Jahangir Hossain, Anas Chaaban
top venue similarity 0.63
Abstract

Tri-hybrid multiple-input multiple-output architectures have recently emerged as a promising enabler for next-generation wireless systems, as they potentially provide enhanced design flexibility without a proportional increase in hardware cost or power consumption. However, the resulting triple-domain coupling renders beamforming optimization challenging and computationally demanding. This paper develops a fast tri-hybrid beamforming framework for multiuser downlink systems employing dynamic metasurface antennas (DMAs). Based on the equivalence between weighted sum-rate maximization and weighted sum-minimum mean square error minimization, an iterative algorithm is first derived under per-DMA input power constraints, with all update equations available in closed form, but convergence inherently remains slow. To enable real-time operation, the algorithm is further unfolded into a trainable finite-iteration architecture using graph neural networks that ensure permutation equivariance and support varying numbers of users. Trained on ray-tracing channel data, the unfolded method achieves comparable or higher system sum-rates while reducing runtime by more than an order of magnitude. The method also demonstrates strong scalability, robustness, and generalization across various environments.

0.41

Off-Grid Position Optimization under Mutual Coupling in Fluid Antenna Arrays

cs.IT ·2026-08-16 ·Jingyuan Xu, Jian Dang, Zaichen Zhang
similarity 0.62
Abstract

Fluid antenna arrays exploit continuous antenna repositioning within a finite aperture to provide geometry diversity beyond grid-constrained port selection. Every displacement, however, changes both the radiation response and the multiport mutual-impedance network, coupling geometry optimization with the source-voltage constraint. This paper develops an electromagnetic-aware (EM-aware) beamforming framework for planar fluid antenna arrays. Phase retrieval converts an amplitude-only shaped-beam specification into an aperture-compatible complex target, and an EM-aware orthogonal matching pursuit (OMP) method selects grid-constrained initial antenna positions. Continuous refinement then alternates exact voltage-constrained current optimization with movement-constrained projected adaptive moment estimation (Adam) updates of all physical antenna positions. Across independently perturbed symmetric dual-beam targets, the proposed method consistently improves the average mainlobe signal-to-noise ratio (SNR) and reduces the peak sidelobe level (PSLL) over a uniform array and discrete port selection.

0.32

Sparse Port Selection under Mutual Coupling in Fluid Antenna Arrays

cs.IT ·2026-08-16 ·Jingyuan Xu, Haoyu Liang, Zaichen Zhang, Jian Dang
similarity 0.60
Abstract

Fluid antenna systems obtain spatial degrees of freedom by reconfiguring antenna positions within a confined region, a principle that extends to beamforming: shaped beams can be synthesized using far fewer radio-frequency feeds than candidate antenna positions. When the candidates are densely arranged, however, electromagnetic mutual coupling changes the relationship among terminal voltages, induced currents, and radiated fields, so an uncoupled model no longer describes the hardware and may activate an unsuitable set of ports, distorting the synthesized pattern. This paper develops a mutual-coupling-aware framework that converts the desired beam amplitude into a finite-aperture-compatible complex target and models the complete antenna lattice as a coupled multiport network, selecting the active ports and their source voltages through the coupled voltage-to-field response. Inactive candidate ports remain part of the network and carry induced currents, and every compared design is evaluated through the same electromagnetic model under the same source-voltage budget. Numerical results show that the mutual-coupling-aware design improves both the average mainlobe signal-to-noise ratio (SNR) and the peak sidelobe level (PSLL) over coupling-unaware selection and a fixed array, demonstrating that mutual coupling should be exploited in the design itself rather than compensated only in the final evaluation.

0.38

Joint Beamforming Design and Port Selection in Fluid Antenna-Assisted Multi-Cell Networks: A Personalized Federated Learning Approach

cs.IT eess.SY ·2026-08-26 ·Liwen Gao, Li Zheng, Xing Hao, Ziru Chen, Lin X. Cai
publishedbenchmark similarity 0.59
Abstract · This paper is accepted by IEEE GLOBECOM 2026

This paper investigates joint beamforming and port selection in multi-cell fluid antenna-assisted (FAS) networks. In such networks, active beamforming and discrete FA port selection are coupled through intra-cell and inter-cell interference and are jointly optimized to maximize the weighted sum-rate (WSR). We develop a federated representation learning (FedRep) framework with a position-aware dual-branch deep neural network (PA-DNN). The PA-DNN uses channel state information and port positional encoding as inputs, and jointly outputs beamforming vectors and port selections through two task-specific branches. To support decentralized training across heterogeneous cells, the FedRep framework shares global beamforming-related parameters among base stations while keeping port-selection parameters local for cell-specific adaptation. Simulation results show that the proposed scheme achieves a higher weighted sum-rate than conventional FL and port-selection benchmark schemes.

0.39

Physics-Augmented Graph Transformers for Patch-Antenna Forward and Inverse Design

cs.LG physics.comp-ph ·2026-10-04 ·Avi Epstein, Snir Nehemia, Haim Suchowski, Lior Wolf
publishedbenchmarkcode/data similarity 0.57
Abstract · 6 pages, 3 figures, 3 tables. Accepted for oral presentation at the 2026 IEEE International Workshop on Machine Learning for Signal Processi…

Full-wave electromagnetic (EM) simulation enables accurate patch-antenna analysis but is computationally expensive for large-scale forward prediction and inverse design. We present a mesh-native, physics-augmented graph-learning framework that treats radiation-pattern prediction as signal reconstruction on an irregular surface mesh. For the forward problem, a GPS graph transformer is trained with Physics-Augmented Intermediate Supervision (PAIS), an auxiliary node-level objective that predicts complex surface currents, the physical intermediate linking geometry to radiation. PAIS improves multiple GNN backbones at no inference-time cost, while shuffled-current and non-physical controls show the gain comes from physical correspondence. Direction-conditioned decoding and a differentiable radiation-integral consistency loss further exploit this structure. On an 80,000-sample CST benchmark, GPS+PAIS reaches MSE 0.17 / PSNR 19.67, generalizes to a PCA split, and transfers zero-shot to canonical patches. For inverse design, surrogate-filtered diffusion beats nearest-neighbor retrieval by 32% relative MSE.

0.48

Flexible Beamforming via Fluid Antenna Array: From Discrete to Continuous Array

cs.IT ·2026-10-25 ·Jingyuan Xu, Yuanhui Wu, Zhentian Zhang, Zaichen Zhang, Tuo Wu +4 more
similarity 0.56
Abstract · 12 pages, 9 figures. Submitted to IEEE Transactions on Wireless Communications

Fluid antenna arrays (FAAs) reconfigure their effective aperture by activating radiation ports from a dense set of candidate positions within a finite physical region, thereby offering geometry diversity beyond conventional fixed arrays. This paper studies arbitrary-direction far-field beam synthesis with a planar FAA. Since a fixed array adapts its beamforming weights on a predetermined spatial sampling structure, its ability to match desired beam patterns is limited when both the aperture and the number of active elements are constrained. To exploit the geometry diversity of the FAA, we propose a coarse-to-fine scheme that couples discrete port selection with continuous joint refinement. In the coarse stage, a fast Fourier transform (FFT) based phase retrieval step converts the amplitude-only beam specification into an aperture-compatible complex target, after which an FFT-tailored greedy method selects the active ports and least squares initializes their complex weights. In the fine stage, a projected adaptive moment estimation procedure jointly refines the continuous port positions and beamforming weights while enforcing the minimum interelement spacing. For the evaluated two-beam configuration, the proposed scheme increases the mainlobe energy fraction from 35.73% to 48.92% and reduces the peak sidelobe level from -2.30 dB to -3.83 dB relative to a fixed array with the same aperture and active-port count.

0.30