CS Paper Radar

Omni-Photonic Base Station: A Three-Functional-Domain Photonic Architecture for Evolutionary 6G Wireless Infrastructure

Dapeng Wang, Xiaoxiong Song, Ziling Fu, Wenyang Cheng, Jiayao Wang, Xiaogang Yan, Ze Wang, Min Zhang, Jingdi Liu, Nan Li

eess.SP physics.optics ·submitted 2026-08-14 03:27 UTC · v1

Abstract

6G mobile communications impose immersive communication demands for higher data rates and massive connectivity, while emerging integrated sensing-computing-intelligence scenarios require base stations to concurrently enhance computing capability, guarantee service latency, and realize sensing. We propose the Omni-Photonic Base Station-a progressive evolutionary architecture that introduces photonic technologies into three functional domains, namely baseband processing, fronthaul transmission, and the RF front-end, and obtains system-level gains through cross-domain co-design. By introducing photonics, Omni-PBS harnesses the inherent physical advantages of ultra-broad bandwidth, ultra-low propagation latency, and native parallelism to transcend the aforementioned electronic bottlenecks and fulfill the compound demands of 6G scenarios. The optical baseband computing domain employs photonic accelerators to perform linear computation-intensive tasks, improving the energy efficiency of AI inference by one to two orders of magnitude. The analog optical fronthaul domain replaces digital fronthaul with analog radio-over-fiber , which eliminates the ADCs/DACs and digital intermediate-frequency chips in the remote unit and substantially reduces fronthaul bandwidth requirements. The microwave-photonic RF domain breaks through the bandwidth and frequency limitations of electronic RF front-ends via optical true-time-delay beamforming, programmable photonic filtering, and optical heterodyne frequency conversion. The three domains yield system-level gains beyond single-domain summation through four co-design principles: end-to-end optical-domain continuity, cross-domain co-design, optical computing resource scheduling, and joint optimization of functional splitting.

Closest papers

Nearest neighbours by meaning across the whole index.

A Time-Encoded Analog Photonic Interposer for Energy-EfficientIntegration of Analog Vision Sensors and Analog Accelerators

cs.AR ·2026-09-02 ·Subhradip Chakraborty, Zihan Yin, Xuming Chen, Chengwei Zhou, Gourav Datta +1 more
similarity 0.53
Abstract

This work introduces a time-encoded analog photonic interposer that enables long-distance, high-fidelity transport of analog signals between spatially separated chiplets. Unlike prior silicon-photonic links limited to digital data, the interposer preserves analog information by converting amplitudes into timing intervals using an analog-to-time converter (ATC), transmitting them over a wavelength-division-multiplexed photonic link, and reconstructing values at the receiver without an explicit high-precision ADC/DAC data-converter pipeline. The link instead embeds an implicit 6-bit time-domain quantization and uses a single wavelength per processing element independent of bit precision. Evaluated in a fully analog vision pipeline with an in-pixel computing (IPC) sensor, it achieves a 2.04x energy--delay product (EDP) improvement over an 8-bit digital electrical baseline on the 560x560 Visual Wake Words dataset, with the advantage widening with link length even against a precision-matched 6-bit baseline. The pipeline holds 89.87% and 86.15% accuracy on ResNet18 and MobileNetV2 for VWW and generalizes across CIFAR-10 and ModelNet40 within 2% of the digital baseline.

0.26

Virtualized 5G Tesbed using OpenAirInterface: Tutorial and Benchmarking Tests

cs.NI ·2026-09-11 ·M. Dória, V. Sousa, A. Campos, N. Oliveira, P. Eduardo +7 more
publishedbenchmarkhighly cited similarity 0.52
Abstract

The development of 5G and its evolutionary path to 6G brings virtualization as close as possible to the antennas. Native 3GPP systems are now software running at servers boosted by accelerator cards to cope with computationally intense signal processing. Meanwhile, the Radio Frequency (RF) front-end is still proprietary hardware, sheltering specific PHY-layer procedures like passband amplification/modulation. This approach takes advantage of the software's flexibility while keeping the complex microsecond signal processing performance from modern telecommunication systems. This paper provides tutorial material on the Core Network and Radio Access Network of OpenAirInterface (OAI) 5G stack on top of Universal Software Radio Peripheral (USRP) platforms. A set of blueprints showcases OAI's ability to provide a virtualized 5G network with different transmission capabilities and the possibility to use it with commercial mobile phones. Configuration discussions and throughput benchmark analyses follow installation and deployment instructions. Our results show that 5G prototyping using OAI and USRP frontends can lead to good reproducibility and consistent throughput.

0.49

Versatile Photonic Encoding Platform with Selectable Back Ends for Automotive Edge Processing

cs.ET ·2026-10-29 ·Isamu Takai, Makoto Nakai, Ayana Mizuno, Atsutaka Miyamichi
similarity 0.52
Abstract · 21 pages, 10 figures, 3 tables, 4 supplementary tables

The increasing diversity and computational demands of automotive edge functions require hardware architectures that support heterogeneous processing while limiting implementation complexity and system overhead. We investigate a system-level approach in which a common, fixed photonic front end provides a shared physical transformation for multiple processing functions, while application adaptation is handled by lightweight peripheral processing. We propose the Versatile Photonic Encoding Platform (VPEP), implemented using a fabricated silicon-photonic chip with 32 phase-modulated inputs, a passive fixed encoding core, and 17 on-chip photodetector outputs. Without reconfiguring the photonic core, the same chip is evaluated across four representative functions relevant to automotive edge systems: classification and regression for machine learning, analog-to-digital conversion for mixed-signal processing, and photonic information encoding and recovery for communication-related processing. Compared with linear baselines without photonic encoding, VPEP improves the mean macro-F1 score on 12 of 13 classification datasets and the mean coefficient of determination on 9 of 12 regression benchmarks. For analog-to-digital conversion, the best configuration achieves an in-sample normalized root-mean-square error of approximately 0.75% of full scale. For information encoding and recovery, a lightweight nonlinear decoder reconstructs four-character (32-bit) inputs from 17-channel encoded outputs with approximately 94% character accuracy for a 26-symbol set. These results demonstrate the feasibility of cross-application processing with a single fixed silicon-photonic encoding core and suggest a system-level design approach, complementary to reconfigurable photonic architectures, that combines common photonic hardware with lightweight application-specific processing for future automotive edge systems.

0.29

True 3D Holography: A Communication Service of Tomorrow and Its Requirements for a New Converged Cloud and Network Architecture on the Path to 6G

cs.NI cs.DCeess.SP ·2026-10-29 ·Ingo Friese, Mandy Galkow-Schneider, Louay Bassbouss, Alexander Zoubarev, Andy Neparidze +15 more
publishedhighly cited similarity 0.52
Abstract

Research project 6G NeXt is considering true 3D holography as a use case, setting requirements on the communication as well as the computing infrastructure. In a future holographic communication service, clients are widely spread in the network and cooperatively interact with each other. Especially for holographic communication high processing power is required as well. This makes a high-speed distributed backbone computing infrastructure, which realizes the concept of split computing, inevitable. Furthermore, tight integration between processing facilities and wireless networks is required in order to provide an immersive user experience. This paper illustrates true 3D holographic communication and its requirements. Afterward, an appropriate solution approach is elaborated. Here, novel technological approaches are discussed based on a proposed overall communication and computing architecture.

0.44

6G NeXt - Towards 6G Split Computing Network Applications: Use Cases and Architecture

cs.NI cs.DCeess.SP ·2026-10-06 ·Sergiy Melnyk, Qiuheng Zhou, Hans D. Schotten, Mandy Galkow-Schneider, Ingo Friese +15 more
similarity 0.49
Abstract

The definition of the sixth generation mobile communication is in the full swing. Mobile communication aims for the convergence of physical, human and digital world. Research project 6G NeXt is considering two demanding use cases, holographic communications and drones anti-collision system, which set heterogeneous requirements on the communication as well as the computing infrastructure. In both use cases, the clients are widely spread in the network and are cooperatively interacting with each other. Especially for holographic communication, also high processing power is required. This makes a high-speed distributed backbone computing infrastructure, which realises the concept of split-computing, inevitable. Furthermore, tight integration between processing facilities and wireless network is required in order to provide adequate quality of service to the users. This paper illustrates the use case scenarios and their requirements. Afterwards, an appropriate solution approach to realise those is elaborated. Here, the novel technological approaches are discussed based on the developed overall communication and computing architecture.

0.54

A Frequency-Space Terahertz Transceiver Chip for Multi-Agent Communications and Spatial Awareness

eess.SY physics.app-ph ·2026-08-12 ·Xiaoyue Xia, Zhicheng Lin, Hao Guo, Siran Wang, Jingyuan Zhang +5 more
similarity 0.48
Abstract

Future indoor embodied-intelligence systems require scalable hardware platforms that support both high-capacity multi-agent connectivity and mutual spatial awareness. The terahertz (THz) spectrum offers abundant bandwidth and inherent spatial selectivity for integrated sensing and communication (ISAC); however, conventional phased arrays and programmable metasurfaces rely on dense beamforming networks, element-level control, or external THz illumination, making scalable multibeam operation challenging. Here, we report a fully integrated 208-258GHz 65-nm CMOS THz transceiver chip that monolithically integrates broadband front ends with heterogeneous leaky-wave metasurface (HLM) apertures within a 1.5mm by 4.9mm area. The HLM generates strongly dispersive leaky modes, enabling 75 degree frequency-controlled beam scanning with only four meta-atoms. Co-design of frequency-domain and spatial-domain mixing achieves spectrally clean frequency-to-space mapping for spatial-frequency division multiple access (SFDMA) communication. The THz chip demonstrates multi-agent simultaneous transmission and reception, two-dimensional localization, and sensing-enhanced communication, providing a scalable hardware platform for future THz embodied-intelligence networks.

0.34

Wave-Domain Semantic ISAC: Holographic Surfaces as Analog Semantic Encoders for Integrated TN-NTN

cs.LO ·2026-11-10 ·Shadi Danesh, Pooria Salami, Hesaam Zaravashan, Abdulkadir Köse, Ayhan Akbas +2 more
published similarity 0.48
Abstract · 8 pages, 3 figures, accepted for publication in IEEE Communications Standards Magazine

Semantic communication, near-field operation, and integrated sensing and communication (ISAC) are often considered separately in terrestrial and non-terrestrial networks (TN--NTN). We show how a large electromagnetic aperture can connect them. \textcolor{black}{Nonlocal metasurfaces and holographic apertures act on the spatial spectrum of an incident field and can execute linear projections, which form an early stage of semantic feature extraction, directly in the wave domain before digitisation, thereby reducing the corresponding digital processing burden.} Near-field focusing also provides position-dependent sensing features, allowing the aperture to serve as an analog semantic-ISAC front end on resource-constrained aerial and satellite platforms. We describe the underlying physics, the co-design of constrained analog projections with lightweight digital decoders, and a case study in which a data-adaptive projection outperforms a fully digital baseline in the simulated energy-limited regime while transmitting four times fewer coefficients and using 11.4 times fewer decoder MACs. Finally, we identify relevant 3GPP, ITU-R, and ETSI activities and the remaining standardisation gaps.

0.57

Programmable Compute-in-Transit using Integrated Photonics

cs.AR ·2026-08-21 ·Imon Kundu, Livi Hammond, Jamie Todd, Kriti Goel, Peter Simpson +6 more
similarity 0.48
Abstract

Modern hardware designs for AI and cryptography treat data transit and processing separately. At Optalysys we have demonstrated programmable Photonic hardware that computes mathematical functions on data that is in transit, enabling tens of GFLOPs of operations on data links.

0.28