CS Paper Radar

Rapid Debris-Volume Estimation from Post-Hurricane Aerial Imagery

Kooshan Amini, Jamie Ellen Padgett, Guha Balakrishnan

cs.CV eess.IV ·submitted 2026-08-17 22:06 UTC · v1
survey

Abstract

Hurricane debris removal is planned, contracted, and federally reimbursed on the basis of volume estimates, yet operational practice still relies on parametric forecasts with 41-90% documented over-estimation or on truck-load tallies that arrive only after hauling begins. We present DebrisHeightNet, a segmentation-conditioned monocular debris-height network that estimates spatially explicit debris volume from a single pass of post-event aerial RGB imagery, the kind of survey routinely flown within days of a hurricane landfall. We train only a lightweight 1.08 M-parameter head on top of two frozen vision foundation models. This head regresses height from a Depth Anything V2 backbone, conditioned on the debris segmentation of CLIPSeg-debris from our prior work. Because no post-hurricane debris-height ground truth exists, we synthesize the training target by confidence-weighted LiDAR-monocular fusion (CW-LMF), designed to suppress non-debris LiDAR returns. This fused target is a constructed supervision signal rather than ground truth, so we corroborate it against external references rather than claiming it as truth. A region-level power-law calibration, driven by each region's low-density debris fraction, converts model volume into an estimate of the reported hauled debris with quantified uncertainty. Across ten regions spanning five hurricanes and three states, the uncalibrated model agrees with an independent uncrewed-aerial-vehicle (UAV) survey of the training region at Spearman $ρ= 0.87$ and lands within 30% of the reported record where the Hazus and FEMA-hybrid parametric forecasts over-predict it by 2.7-4.8$\times$. Deployment requires no LiDAR, no ground access, and no second flight, so the method can produce spatially explicit volume estimates wherever single-pass post-event imagery is flown.

Closest papers

Nearest neighbours by meaning across the whole index.

When Satellite and Street Views Disagree: Cross-View Complementarity in Disaster Damage Assessment

cs.CV ·2026-10-03 ·Yifan Yang, Lei Zou
published similarity 0.63
Abstract · 4 pages, 3 figures; Accepted for publication in the proceedings of the 5th ACM SIGSPATIAL International Workshop on Searching and Mining Lar…

Satellite and street-view imagery see different parts of a damaged building: roofs from above, facades and debris from the ground. Average accuracy hides whether fusion methods use this complementary evidence. We study the conflict cases, the samples on which independently trained single-view models disagree, as a diagnostic subset. On paired collections from the 2025 Eaton wildfire and Hurricanes Ian and Milton, conflicts make up 9.6-33.2% of the test data. Fusion improves conflict accuracy over either view, yet an oracle that selects the correct single view per conflict remains 0.19-0.32 above the best evaluated fusion method. A linear fusion gate over building-visibility features, calibrated confidences, and disagreement recovers part of this headroom where ground photographs are aimed at the building: on Eaton it beats end-to-end fusion by +0.072 conflict accuracy p < 10^-4 and calibrated averaging by +0.051 p = 0.0001; on the panoramic hurricane datasets it is indistinguishable from end-to-end fusion. Cropping panoramas toward the building raises the conflict gain of fusion, whereas random crops of the same size do not. The spatial density of conflicts, computed without labels, correlates with tile-level wildfire damage Spearman r = 0.615, 25 tiles. Conflict cases thus show how much complementary evidence fusion uses, which view it carries under each hazard and capture setting, and where current methods fall short.

0.48

Extrapolation Matters: Sparse-Only Depth Completion Beyond LiDAR Coverage

cs.CV ·2026-11-05 ·Maximilian Jansen, Gasser Elazab, Praveen Kulkarni
hot direction similarity 0.63
Abstract

Extrapolation beyond LiDAR coverage is an important yet under-evaluated challenge of depth completion. In real camera--LiDAR systems, partial sensor overlap, occlusions, and limited field coverage often leave large image regions weakly observed or completely unobserved by LiDAR. Thus, we investigate depth completion in this beyond-coverage regime using only sparse supervision from raw single-sweep LiDAR, without dense depth labels, LiDAR accumulation, or pseudo-LiDAR generation. Our approach leverages a frozen monocular depth foundation model, lightweight per-frame alignment to sparse LiDAR geometry, and a refinement module that fuses the aligned prior with sparse LiDAR anchors to predict dense metric depth. To regularize learning under raw sparse supervision, we introduce a high-frequency normal-consistency loss defined as the image-space gradient of the per-pixel normal cosine discrepancy. This term penalizes spatial variation in scalar angular error; it does not directly match changes in neighboring normal vectors. We further introduce an evaluation protocol that explicitly separates LiDAR-supported and beyond-coverage regions, revealing extrapolative behavior that conventional depth-completion metrics can obscure. Our method achieves strong depth accuracy beyond LiDAR coverage while remaining competitive in LiDAR-covered regions, providing a practical way to deploy monocular foundation priors in multi-sensor systems.

0.18

Let LiDAR Decide Where to Look: Geometry-Measured Token Selection for Efficient Sparse Latent World Models

cs.CV ·2026-10-29 ·Zeping Zhang, Zhuoya Zhao, Robert Laganière
similarity 0.63
Abstract

Vision-centric autonomous driving models encode thousands of image tokens per frame, yet most depict sky, buildings, or empty road---content irrelevant to planning. Worse, these tokens dilute the planner's attention: we show that randomly discarding 75% of tokens already outperforms the dense model, because the planner can concentrate on the remaining driving-critical content. Building on this finding, we present Geometry-Aware Token Selection (GATS), which uses LiDAR and radar point projections to select a small fraction of image tokens before the vision backbone runs. Because the selector operates on measured 3D geometry rather than visual features, the backbone encodes only the selected patches, cutting end-to-end FLOPs by up to $18\times$. Each kept token receives a 3D anchor from its LiDAR point and is fed to a self-supervised latent world model that predicts future features and 3D displacements without box annotations. At 25% budget, GATS achieves a 3-sec L2 displacement error of 0.520 m on nuScenes and an EPDMS of 88.9 on NAVSIM---surpassing the dense baseline (0.573 m / 85.9) at $6.6\times$ fewer total FLOPs. At an extreme 10% budget (24 GFLOPs, $18\times$ reduction), it still beats the dense baseline on both nuScenes (0.537 m vs. 0.573 m L2) and NAVSIM (87.9 vs. 85.9 EPDMS). On 739 intent-critical scenarios, GATS covers 95.8% of hazardous vehicles and achieves a 0.09% collision rate---73.5% lower than the dense model (0.34%).

0.19

RLG-TPV: Radar- and LiDAR-Guided Tri-Perspective View Fusion for Camera-Radar 3D Object Detection

cs.CV ·2026-08-29 ·Ahmet Mete Dokgoz, A. Enes Doruk, Hasan F. Ates
similarity 0.63
Abstract

Tri-Perspective View (TPV) representations describe 3D scene structure through top, side, and front feature planes, but existing TPV lifting is primarily camera-based, leaving the depth of sampled image evidence ambiguous along projected camera rays. We propose RLG-TPV, a multimodal TPV framework for camera-radar 3D object detection in which radar and training-time LiDAR provide complementary geometric guidance during representation construction. A ray-guided deformable-attention lift weights sampled image features using LiDAR-supervised camera depth probabilities and radar frustum occupancy, while radar additionally refines the depth distribution before lifting. Because conventional radar provides limited elevation information, LiDAR-derived class-occupancy targets supervise the side and front planes during training; the corresponding heads are removed at inference, so deployment requires only cameras and radar. For temporal aggregation, Doppler-guided temporal fusion aligns past features using a motion field anchored by measured radar radial velocity, with gating that limits warping in regions without supported motion. An RCS-aware radar scatter further allows radar evidence to spread over spatial neighborhoods conditioned on radar cross section. On the nuScenes validation set, RLG-TPV achieves 0.4981 mAP and 0.5959 NDS, reducing orientation and velocity error by 31.9\% and 30.7\% relative to the published CRN baseline. Ablation studies show that ray-level geometric guidance is a major contributor to the final performance.

0.09

CLOCs-R: Radar-Assisted Camera-LiDAR Fusion for Long-Range Object Detection

cs.CV ·2026-11-03 ·Richard Beuck, John Nguyen, Sudip Dhakal
hot direction similarity 0.62
Abstract

Long-range 3D object detection remains difficult for autonomous vehicles because LiDAR returns become sparse and camera evidence weakens with distance, while automotive radar keeps returning measurements far beyond both. We present CLOCs-R, an extension of the CLOCs candidate-level fusion framework that adds radar evidence to camera-LiDAR rescoring. Radar returns are accumulated over several sweeps, compensated for ego-motion, and associated with each pre-NMS 3D candidate through a range-dependent gate. Compact features summarizing support, Doppler speed and spread, range residual, and offset are then appended to every camera-LiDAR pair before a lightweight fusion network rescores the candidates. We first verify that our fusion implementation reproduces CLOCs on KITTI. We then evaluate on the daytime clear-weather subset of the aiMotive dataset, reporting distance-binned metrics out to 200 m with frozen SECOND and Cascade R-CNN detectors. Camera-LiDAR CLOCs improves on SECOND up to 50 m but degrades beyond it. A residual scoring variant, introduced post hoc, corrects SECOND's score instead of replacing it and recovers most of this loss. Radar consistently improves BEV AP at 30-50 m (0.857 to 0.870), but beyond 50 m its gain is small (+0.003 center-distance AP), within seed variation, and CLOCs-R with residual scoring is statistically tied with LiDAR-only SECOND. Our analysis attributes the limited long-range benefit to weak separation of true and false detections by radar features, scarce far-range training positives, poor camera evidence at distance, and missing LiDAR proposals that rescoring cannot recover. We report all as-designed and post hoc results side by side.

0.22

Fusing Earth observation embeddings and spaceborne terrain with meteorological forcing for flood peak depth prediction from high-water marks

cs.LG ·2026-11-03 ·Wen Zhou, Shaowen Wang, Upmanu Lall, Venkatesh Merwade, Dingqi Ye
similarity 0.62
Abstract

Flood peak depth on normally dry land governs damage and risk to life, but is observed only sparsely, by post-event high-water mark (HWM) surveys, and depth derived from satellite flood extent is produced after the event and inherits the vertical error of the digital elevation model (DEM) it is computed from. Deep-learning flood models have in turn been trained on hydrodynamic simulations rather than on observed depths. We ask whether flood peak depth can be learned from field observations and predicted before the peak from spaceborne terrain, geospatial foundation-model embeddings and antecedent meteorological forcing. We assembled 5689 USGS HWM surveys from 39 events (2011-2025) in 24 U.S. states and Puerto Rico, assigned each a peak time from nearby sensors, paired each with a rain-free window at the same site, and linked them to Copernicus GLO-30 terrain, AlphaEarth embeddings and 144 h of hourly forcing masked to the lead time. A cross-modal fusion network trained on these observations predicts depth at the surveyed marks with a mean absolute error of 0.39 m 6 h ahead of the peak. Supervision by surveyed depth corrects the DEM error implicitly: differencing the measured peak water level with the same DEM gives 0.93 m at the same marks, 2.4 times larger, although it uses the measured water level and the model does not. Forcing accounts for 77% of the attributed reduction in depth error; terrain and the embeddings are statistically equivalent to each other and contribute the remaining 23%. On eleven held-out events the model still separates flooded from rain-free conditions but no longer resolves depth at the marks (R2 = 0.03), so the skill reported here is confined to the events and regions sampled. Field-surveyed depths can thus supervise flood depth prediction and correct terrain error that extent-based estimation cannot, while transfer to unseen storms remains the open problem.

0.13

Sub-Meter Canopy Height Synthesis from Sentinel-2 via Anchored Residual Flow

cs.CV cs.LG ·2026-11-17 ·Kiarie Ndegwa, Tony Chang, Andreas Gros, Vincent A. Landau, David D. Diaz +3 more
hot direction similarity 0.61
Abstract · 30 pages, including appendices

Canopy height models (CHMs) - per-pixel maps of vegetation top height - are essential for forest carbon accounting, wildfire fuel mapping, and tree-level ecology, yet sub-meter CHMs require airborne LiDAR refreshed on multi-year national cycles. We produce 0.5 m CHMs from free 10 m Sentinel-2 imagery, a 20$\times$ cross-modal super-resolution task where optical reflectance must predict geometric height it does not directly observe. Motivated by the perception-distortion trade-off, we derive two operating points with shared conditioning. A deterministic regressor (Anchor) targets low distortion; a conditional flow matching model, trained on the Anchor's residual in a learned CHM latent space (AR-flow), targets perceptual fidelity. Trained on 197k LiDAR-paired tiles spanning 69 ecoregions across the contiguous United States and evaluated on 2,530 held-out tiles against eight baselines, the Anchor achieves 2.83 m MAE using only free satellite input. The AR-flow reduces sliced Wasserstein distance from the Anchor's 1.13 to 0.208, at a higher MAE of 3.68 m. Crown-scale statistics improve, but strict individual-tree detection remains weak: generated sub-pixel detail represents plausible structure rather than measured individual trees. Quarterly continental refresh becomes tractable, letting satellite monitoring inform timing and extent for more expensive data acquisitions.

0.39

DeepStratNet: A Context-Aware Coordinate Regression Framework for Seismic Horizon Tracking under Sparse Labels

cs.CV ·2026-10-01 ·Aniq Ahmad, Musham Ahmad Malik, Ahmad Mustafa, Heather Bedle
similarity 0.61
Abstract

Automatic horizon tracking is a foundational task in 3D seismic interpretation. Most existing deep learning approaches formulate it as dense semantic segmentation, typically using U-Net-based architectures. The model produces a probability map over all pixels that must be post-processed to extract precise horizon coordinates, while horizon picks in time/depth must be converted into dense masks for training. Unpicked seismic traces are consequently treated as background, which can hinder convergence, and both pre- and post-processing can introduce errors into the final interpretation. Moreover, 2D segmentation models do not inherently capture inter-slice context, while 3D models are often computationally prohibitive. We instead formulate horizon tracking as a bounded coordinate regression problem, where the model directly predicts the time/depth coordinate of the target horizon at each lateral position. We propose a lightweight regression head compatible with any pretrained vision backbone, coupled with an LSTM module to model inter-slice context and produce a continuous horizon surface across the volume. A combination of L1 and L2 losses supervises predictions at valid horizon picks, while a geology-informed regularization enforces lateral continuity between successive traces. Under controlled experimental conditions, we evaluate four pretrained vision backbones under both segmentation and regression configurations on a seismic volume from New Zealand. The proposed approach consistently outperforms its segmentation counterparts quantitatively, using metrics including RMSE and PCC, and qualitatively, while also demonstrating greater robustness to increasing sparsity of training picks. Finally, we show that prediction variation across successive traces captures local variations in geological complexity, providing an automated quality control measure for downstream seismic interpretation.

0.24