CS Paper Radar

AI Visual Inspection for Garment Production

Ray Wai Man Kong, Ding Ning, Theodore Ho Tin Kong

cs.CV cs.RO ·submitted 2026-08-16 15:43 UTC · v1
published

Abstract

The garment manufacturing industry is under increasing pressure to improve product quality, reduce costs, and accelerate digital transformation toward Industry 4.0. One of the most challenging quality-control activities is sewing-line inspection, where defects such as broken stitches and skipped stitches are difficult to detect consistently through manual inspection. Human-based inspection is often affected by fatigue, subjective judgement, and inconsistent performance, resulting in defect leakage, rework, and reduced production efficiency. This study presents the development and validation of an Artificial Intelligence (AI)-based visual inspection system for garment sewing-line quality control. The system utilizes Convolutional Neural Networks (CNNs) to detect sewing defects and was initially trained using black fabric and black sewing thread samples. Experimental testing was conducted on black, red, dark green, light blue, silver, and fluorescent yellow fabrics. The results demonstrated successful detection of jump sewing-line defects on black, red, and dark green materials, while performance limitations were observed for broken sewing-line defects and fabrics with significantly different visual characteristics, including light blue, silver, and fluorescent yellow colours. These findings indicate that model accuracy is strongly influenced by the diversity of training data and the ability to generalize across different fabric and thread colours.

Comment
18 pages, 8 figures
Journal ref
International Journal of Computer Science and Information Technology Research V14 issue 3 pp47-64 July-September 2026
DOI
10.5281/zenodo.21946142

Closest papers

Nearest neighbours by meaning across the whole index.

Low Cost Two-Stage Fabric Defect Detection at the Edge

cs.CV ·2026-08-12 ·Rasel Hossen, Diptajoy Mistry, Mosaddek Hossain Kamal
benchmark similarity 0.59
Abstract · 14 pages, 10 figures, 8 tables. Deployment study on NVIDIA Jetson Nano with TensorRT FP16. Includes a decomposition showing the measured 1.3…

Fabric inspection in the garment industries of low-income economies remains largely manual, and commercial vision systems are priced beyond most small and medium mills. Because defects are sparse under controlled production, a natural response is a cascade: screen every frame with a cheap anomaly detector and invoke a full detector only on suspicious frames. We build such a cascade for four knit-fabric defect classes and deploy it end-to-end on an NVIDIA Jetson Nano with TensorRT FP16. Stage 1 is a compact convolutional autoencoder with decoder attention gates, an edge-weighted reconstruction loss, and feature-level distillation from a frozen YOLOv5n teacher; Stage 2 is YOLOv5n, invoked only on flagged frames. On a 249-image benchmark disjoint from detector training (20 defective, 229 non-defective), Stage 1 at a recall-prioritised threshold flags all 20 defective images (95% CI 0.83-1.00) at a false-positive rate of 49.3% (113/229), reducing false positives by 19.3% relative to a plain autoencoder (p=0.011). The parallel pipeline reaches 13.45 FPS against 9.86 FPS for a sequential YOLO-only loop. Our central finding comes from decomposing that 1.36x: 91% of it is attributable to overlapping JPEG decode with inference rather than to the cascade, which contributes only a 5.1% inference reduction at the measured forwarding rate p = 0.534. We further show that forwarding here is false-positive-limited rather than prevalence-limited - 85% of forwarded frames are false alarms - and quantify the 29-45% inference reduction attainable under tighter calibration. We report this as a caution for cascade speedups measured without controlling the data path, and position the system as AI-assisted triage rather than autonomous acceptance.

0.10

Lowering the Barrier to AI-Driven Inspection: A No-Code Workflow for Automated Structural Defect Detection

cs.CV cs.LGeess.IV ·2026-08-25 ·Michael Holm, Tanner McElroy, Xinghang Zhang, Guang Lin
publishedcode/data similarity 0.59
Abstract · 11 pages, 7 figures. Accepted to ASME SMASIS 2026 (paper SMASIS2026-190654). Software available at https://github.com/michaelholm6/YOLOEZ

Structural health monitoring (SHM) is essential in modern engineering, providing data for condition-based maintenance, lifecycle assessment, and predictive decision-making. Traditionally, SHM relied on visual inspection to detect defects such as cracks and deformations. Early computer vision (CV) methods, including thresholding, edge detection, and handcrafted features, aimed to automate this process but were highly sensitive to noise, imaging variations, and multiscale defects, limiting their reliability. Recent advances in machine learning, particularly convolutional neural networks (CNNs) and You Only Look Once (YOLO), have improved defect detection accuracy and enabled real-time analysis. However, adoption in SHM remains limited due to technical barriers such as data labeling, model training, and deployment, which typically require programming expertise. To address this gap, we introduce YOLOEZ, an open-source, GUI-based tool for end-to-end YOLO model application. YOLOEZ integrates data labeling, training, and inference into a single interface, enabling high-performance model development without code while supporting reproducible workflows. Evaluation against existing software and classical image processing demonstrates that YOLOEZ not only outperforms traditional methods across most detection metrics, but also lowers adoption barriers present in other modern CV tools. By combining accuracy with accessibility, YOLOEZ facilitates wider use of AI-driven monitoring for predictive maintenance, digital twins, and intelligent structural systems.

0.42

Automatic weld seam segmentation for industrial quality control: a comparison of RGB and polarimetric imaging with CNN and transformer architectures

cs.CV cs.AI ·2026-08-26 ·Simone Garbin, Leonardo Venturoso, Marco Todescato
similarity 0.55
Abstract

Visual inspection of welded assemblies remains one of the least automated stages in many industrial production processes, still depending largely on the experience of human operators and thus subject to inter-operator variability; the manufacturing of special-purpose machinery cabins, the setting of this study, is one representative case. This work evaluates the feasibility of automatic weld seam segmentation from RGB and polarimetric imagery, comparing controlled laboratory acquisitions with images captured under real, uncontrolled conditions. Convolutional neural network (CNN) architectures and transformer-based architectures are benchmarked under a unified, threshold-independent protocol, training each CNN with three random seeds to separate genuine effects from seed noise. In controlled RGB conditions, CNN models reach a mean mask mAP50 of up to 0.87, but drop to 0.22-0.48 under uncontrolled acquisition, showing that the acquisition setup is a first-order component of the inspection system. Polarimetric imaging with alignment-preserving geometric augmentation localizes previously unseen welds with a mean mask mAP50 up to 0.93: on par with, rather than ahead of, the best controlled-RGB result, but reaching that accuracy on uncontrolled RGB without requiring acquisition control. The clearest architectural finding concerns viewpoint robustness. In-distribution, transformers and CNNs are broadly comparable; but under a test-time viewpoint shift, the transformer models, and RF-DETR in particular, retain high accuracy while every CNN collapses. The gap holds across three seeds and a resolution-matched control, pointing to architecture rather than training resolution. Within the CNN family, capacity brings no reliable in-distribution gain once seed variance is accounted for: small CNNs suffice for fixed viewpoints, transformers for variable ones.

0.20

Deep Vision in Smart Manufacturing: MODERN Framework for Intelligent Quality Monitoring and Diagnosis

cs.LG stat.ML ·2026-08-14 ·Yicheng Kang, Yuling Jiao, Xin Geng, Mahesh Nagarajan
similarity 0.54
Abstract

Smart manufacturing processes are often installed with a large number of sensors, imaging devices and computers, which not only enable instant communication across various modules of a production system but also aid in intelligent manufacturing management. In this paper, we introduce MODERN, a deep learning framework for quality monitoring and fault isolation, which integrates these enhanced capabilities into the practice of industrial quality control. Using the architecture of an inception residual neural network, we develop a control chart that monitors the likelihood of a product containing defects. We also propose a faulty region estimator that identifies the defective area using transfer learning. To extend our framework to cases where there are not sufficient training data, we suggest a transfer monitoring technique that requires only a small sample size and a hypothesis testing approach for quantitatively assessing the applicability of our method. Theoretically, we establish the minimax optimal convergence rate for both our defect likelihood estimation and fault diagnosis. Our results lead to a seemingly counter-intuitive managerial implication - it may not always be in a manufacturer's best interests to keep upgrading its monitoring equipment regardless of the cost. Empirically, we demonstrate the superior performance of our method in comparison with a state-of-the-art approach using both simulated experiments and real data.

0.04

The Path to NDE 4.0: A Review of Algorithms, Techniques, and Strategies for Autonomous Inspection

cs.LG cs.ET ·2026-10-21 ·Ashiqur Rahmana, Venkata Devesh Reddy Seethi, Zachary Kral, Austin Yunker, Rajkumar Kettimuthu +1 more
survey similarity 0.52
Abstract

Non-Destructive Inspection (NDI) is a cornerstone of modern quality assurance, critical for ensuring the safety and reliability of infrastructure and manufactured components without causing damage. This paper presents a comprehensive review of the current NDI landscape, analyzing the field through four distinct lenses, namely, computational algorithms, physical techniques, industrial applications, and research objectives. We synthesize a broad range of academic literature to illustrate the rapid evolution from manual, analog interpretation to a digitized, data-centric paradigm known as NDE 4.0. Our analysis highlights the dominance of ultrasound and visual inspection as primary physical techniques, while revealing a significant shift toward deep learning and generative models for automated defect recognition. Despite these technological strides, the industry faces critical bottlenecks, notably the scarcity of standardized open-access datasets and the "black box" nature of AI models, which hinders widespread adoption. By charting these developments and identifying key research gaps, such as the need for explainable AI (XAI) and standardized digital twin protocols, this review offers a strategic roadmap for future research. It concludes that the future of NDI research should focus on the successful integration of intelligent, autonomous fusion of inspection data with advanced sensor technologies into asset lifecycle management.

0.31

Trustworthy Visual Quality Inspection under Data Scarcity in Manufacturing

cs.CV ·2026-08-22 ·Panagiotis Sapoutzoglou, Jessy Ribaira, Martin Kanounnikoff, Bas Tijsma, Christian Geiß +1 more
published similarity 0.52
Abstract · Accepted at International Conference on the Economics of Grids, Clouds, Systems, and Services (GECON) 2026

Automated visual inspection in manufacturing aims to replace slow and inconsistent manual checks, but its economic value depends on whether its decisions can be trusted enough to automate routine inspection while reserving human expertise for ambiguous cases. In production-line settings, defective samples are scarce, since the process is optimized to produce good parts, which limits any learning-based inspector trained on real data alone. Compounding this, defect decisions emitted as hard labels with no confidence estimate carry an asymmetric cost: a false reject wastes a good product, while a false accept may increase the risk of undetected defects progressing through the production process. We address both problems by mitigating data scarcity through the generation of synthetic defective samples with a diffusion model, and meeting the need for confidence-aware decisions with a Bayesian classifier that defers ambiguous units to human review rather than misclassifying them. These components are embedded in a staged pipeline of successive, complementary checks. We evaluate how synthetic augmentation affects classification and localization on a test set of real defects, and examine the system's trustworthiness at three points: the decision, the synthetic data, and the pipeline structure. This work-in-progress reports preliminary results suggesting that diffusion-generated defects, combined with uncertainty-aware classification, can lower the cost of reaching a trustworthy, deployable inspection model under data scarcity.

0.28

Towards automatic digital garment assembly

cs.CV cs.GR ·2026-10-12 ·Alejandro Rodriguez
similarity 0.51
Abstract · 11 pages, 8 figures

Creating digital garments from existing two-dimensional patterns remains a time-consuming process. Although patterns are widely available in digital form, their assembly in garment CAD software involves manual definition of sewing operations and arrangement of the pattern panels for drape simulation. We present two learning-based approaches that automate both tasks using the 2D vector pattern as their sole input. Our automatic sewing model operates at the segment level, leveraging a Transformer encoder with multiple prediction heads. Our novel architecture supports many-to-many, ordered segment correspondences, as well as hems, overlapping seams needed for multilayer garments, and construction properties such as seam allowances and stitch types, required for the finished virtual garment but neglected by previous methods. A complementary panel-level model predicts body-region assignments, layers, and placement coordinates to initialize the drape simulation. We evaluate both models on a curated dataset of 4,035 professionally assembled garment instances. The sewing model exactly recovers all seam and hem topologies of 63.3\% of test garments, while the arrangement model meets the specified placement criteria for all panels in 66.2\% of test garments. We also integrate both methods into garment CAD software, demonstrating automatic assembly of successfully predicted garments.

0.16

Digitization of Analogue Gauges using Computer Vision

cs.CV cs.AI ·2026-11-19 ·Erico Kayumba Mutonkole, Olasupo Ajayi, Omowunmi Isafiade
published similarity 0.51
Abstract · 9 pages, 12 figures. Presented at SATNAC 2025

Analogue gauges remain prevalent in manufacturing industries for measuring physical quantities, yet manual monitoring by operators introduces human error and operational inefficiency. This research developed and evaluated an automated gauge reading system using computer vision and deep learning techniques. Three hybrid approaches were implemented and compared: OpenCV with Scikit-Image (traditional computer vision), OpenCV with ResNet18, and OpenCV with VGG19 (deep learning approaches). A comprehensive dataset of 1,848 pressure gauge images (0-10 BAR range) was curated through web scraping, synthetic generation, and augmentation techniques. The experimental results demonstrate that ResNet18 significantly outperforms the alternatives, achieving an accuracy of 97.3%, compared to VGG19's 64.4% and Scikit-Image's 63.8%. The study validates the effectiveness of residual learning architectures for industrial gauge digitization, providing a robust foundation for Industry 5.0 automation applications.

0.32