CS Paper Radar

Modelling Renewable Curtailment and Constraints in Ireland's Electricity System

Richard Nayer, Sam Hodges, Waqquas Bukhsh, Claver Chitambo, Chanura Wijeratne

eess.SY math.OC ·submitted 2026-08-25 12:13 UTC · v1

Abstract

This paper describes the electricity markets and operational processes in the Irish power system and translates them into a Mixed Integer Linear Programming (MILP) model. The model is designed to estimate renewable generation Curtailment and Constraint. A full mathematical formulation is presented and tested on both a simple example and a realistic model of the Irish transmission network. The results show that the proposed formulation works as intended, capturing curtailment and constraint effects, while also highlighting model limitations and directions for future improvement.

Comment
11 pages

Closest papers

Nearest neighbours by meaning across the whole index.

Modeling of Network Constraints in Large-scale Capacity Expansion Optimization of Power Grids

eess.SY math.OC ·2026-08-28 ·Yu Weng, Lara Booth, Priya L. Donti, Ruaridh Macdonald
publishedtheoryhot direction similarity 0.59
Abstract

Capacity expansion modeling plays a critical role in optimizing the deployment of new generation, storage, and transmission, typically at national and regional levels. To support long-term planning, these models consider a large set of energy technologies and policies, along with decades of weather and demand data. Realistic capacity expansion models thus become high-dimensional optimization problems, with hundreds of millions of variables and constraints, which are challenging to solve. A common strategy to address this complexity is to omit non-linear, non-convex AC optimal power flow (ACOPF) constraints and instead use linearized power balance equations or transport formulations. While these simplifications improve tractability, they limit our understanding of how power flow and the physical properties of power networks impact investment decisions across generation, storage, and transmission infrastructure. This paper addresses this gap by extending the GenX capacity expansion model to incorporate fixed point theorem-based network constraints. These embed ACOPF-based considerations while maintaining the tractability of the planning model, nearly preserving the dimensionality of the transport formulation and incurring only modest runtime increases. This approach is much cheaper than embedding ACOPF directly, making it appropriate for large-scale capacity planning problems. We compare our approach to the original transport-based GenX model as well as a non-linear, non-convex version that incorporates the full ACOPF constraints, for a case study of the ISO New England grid.

0.47

Day-ahead Coordination of Virtual Power Plants within Active Distribution Networks using Deterministic Bi-Level Optimization

cs.CE math.OCeess.SY ·2026-09-15 ·Laura M. Barajas-Arguello, Rafael A. Núñez-Rodríguez, Daniel Gebbran, Clodomiro Unsihuay-Vila
theory similarity 0.58
Abstract

This paper proposes a deterministic bilevel optimization framework for the coordinated operation of Virtual Power Plants (VPPs) embedded in an active distribution network. The Distribution System Operator (DSO) acts as the upper-level leader, minimizing a weighted combination of expenditure, active losses and voltage deviation subject to nonlinear AC power flow constraints, while each VPP operates as a lower-level follower that maximizes its profit under the uniform price signal issued by the DSO. Unlike most existing formulations, which linearize the lower-level subproblem to obtain a Mixed-Integer Linear Program (MILP), the proposed model retains the full AC Optimal Power Flow (AC-OPF) equations, producing a bilevel Mixed-Integer Nonlinear Program (MINLP). The lower-level problem is replaced by its Karush-Kuhn-Tucker (KKT) optimality conditions and the Strong Duality Theorem, yielding a single-level Mathematical Program with Equilibrium Constraints (MPEC). Complementarity conditions are then linearized via the Fortuny-Amat big-M transformation. The framework is validated on the IEEE 33-bus feeder over a 24-hour horizon, with four distributed resources aggregated into a single VPP. Compared with individual dispatch against a regulated time-of-use tariff, aggregation reduces active losses by 10.5 %, the accumulated voltage deviation by 18.3 %, and the bus-hours below 0.95 p.u. from 132 to 29. These gains cost 0.31 % in social cost and 0.26 % in DSO expenditure, while the rent of the aggregator is preserved.

0.14

EndoWake: Modeling Wind by Linear Programming for Wind Farm Layout Optimization

cs.CE math.OC ·2026-09-30 ·Martina Fischetti, Matteo Fischetti
similarity 0.56
Abstract · 30 pages + 12 pages of supplementary material (appended after the references). Replication package: https://doi.org/10.5281/zenodo.22017424

The Wind Farm Layout Optimization problem consists of placing a given number of turbines within a given area so as to maximize energy production. One of its main challenges is the wake effect between turbines, which can strongly affect production and is a cumbersome function to evaluate and to embed in an optimization framework. In this paper we introduce a new endogenous wake model (EndoWake), based on the idea of treating the wind speed at every grid point as a decision variable, linked to its upwind neighbors through linear propagation constraints. This makes it possible to incorporate the wake equations directly into a Mixed-Integer Linear Programming (MILP) model. We then develop such a MILP model and, in particular, introduce a new class of valid "band" inequalities, showing that they substantially strengthen the root bound. Building on this, we design a branch-and-check scheme: the master problem retains only the site variables together with one hypograph variable per cell and scenario, integer solutions are evaluated by an exact linear-time oracle, and the optimality cuts are problem-specific "upwind cuts". Computational results are reported on a ladder of square grids under a four-sector axial wind rose, demonstrating the effectiveness of the proposed improvements.

0.58

Industrial Load Modeling and Optimization for Market-Based Interaction with Power Systems

eess.SY ·2026-08-15 ·Ruike Lyu
similarity 0.55
Abstract · PhD thesis, Tsinghua University, June 2026, 176 pages

The transition toward a renewable-dominated power system increases the flexibility needed to balance net-load variations. Industrial loads account for over 40% of the world's electricity consumption and can shift large amounts of demand through automated production scheduling. However, making industrial processes a dependable flexibility resource for power systems remains challenging because industrial process constraints are non-convex, equipment parameters are often private, and device-level models of thousands of facilities are too detailed for aggregator and power-system optimization. This dissertation builds computationally efficient methods for modeling and optimizing industrial flexibility for power-system interaction. Specifically, this dissertation uses smart meters as the external measurement interface and maps industrial process constraints into a concise flexibility space for power-system operation. The resulting chain of mechanism modeling, parameter identification, constraint dimension reduction, and optimal decision-making makes industrial-load participation computationally tractable while retaining precise process models for final execution.

0.10

Life-Cycle Planning of Collector System for Deep-Sea Multi-Spatial Wind-PV-Tidal Farm

eess.SY ·2026-08-10 ·Wenhao Gao, Weitai Xu, Yunfei Du, Yongheng Wang, Xinwei Shen
published similarity 0.53
Abstract · 14 pages, 12 figures, and 6 tables. Accepted by CSEE Journal of Power and Energy Systems in August 2026

This paper develops a life-cycle optimization model for the collector system (CS) of deep-sea co-located energy farms (CEFs), where co-located energy turbines (CETs) integrate wind, photovoltaic (PV), and tidal current resources across sea-area layers. The model captures multi-layer marine-space complementarity, wake effects, and output variability, while accommodating diverse dynamic submarine cable configurations. To improve computational efficiency, the adaptive piecewise linearization (A-PWL) method based on the outputs of CETs is proposed to transform the original mixed-integer quadratic programming (MIQP) problem into a mixed-integer linear programming (MILP) form to approximate quadratic operation costs and simplify absolute power flow modeling. Case studies demonstrate that incorporating multi-energy complementarity significantly enhances the economic performance of deep-sea CEFs. When external physical risks are negligible, the fully-suspended cable configuration proves more cost-effective than the lazy-wave design. The proposed linearization method achieves high accuracy while significantly reducing solution time. Overall, this work provides a practical and scalable framework for efficient CS planning in offshore renewable energy systems.

0.55

Polynomial-time algorithms for setting tight big-M coefficients in transmission expansion planning with disconnected buses

cs.DM ·2026-09-08 ·Behnam Jabbari-Marand, Adolfo R. Escobedo
published similarity 0.52
Abstract · 16 pages, 8 figures. Published in Optimization Letters

The increasing penetration of renewable energy and rising electricity demand are driving the need to integrate new buses and transmission lines into transmission grids. These trends are reshaping transmission expansion planning (TEP), motivating the development of effective methodologies to manage the resulting complexity. This paper introduces the longest shortest-path connection (LSPC) algorithm, a graph-based method to enhance the mixed-integer linear programming disjunctive formulation of TEP using valid inequalities (VIs). Traditional approaches for determining big-M coefficients in disconnected TEP networks typically rely on solving the computationally intensive longest path problem (LPP). In contrast, LSPC circumvents these limitations by efficiently identifying relevant power-flow paths between disconnected buses within the expansion network. We demonstrate that the VIs generated from these identified paths dominate those derived from LPP-based methods and other existing approaches.

0.55

Co-optimizing Bidding and Power Allocation of an EV Aggregator Providing Real-time Frequency Regulation Service

eess.SY ·2026-08-25 ·Ruike Lyu, Hongye Guo, Kedi Zheng, Mingyang Sun, Qixin Chen
top venuehighly cited similarity 0.51
Abstract · Published in: IEEE Transactions on Smart Grid ( Volume: 14, Issue: 6, November 2023)

The rapidly expanding scale of electric vehicle (EV) fleets and continuously decreasing battery costs are making vehicle-to-grid services a reality. In this paper, we study the interaction between the problems of an EV aggregator's bidding in the regulation market and power allocation (i.e., determining the (dis)charging powers of the EVs in regulation deployment). Although the two problems are coupled, they are often regarded as decoupled and optimized separately for complexity issues. However, failing to consider the coupling of bidding and power allocation can lead to a decline in the profit of the EV aggregator (EVA). In this paper, we propose a framework for co-optimizing EVA bidding and power allocation in the regulation market. The bidding model is formulated as a stochastic programming problem with embedded power allocation in discretized regulation signal scenarios. To meet the solution time requirement for regulation deployment, we further propose a power allocation model that can be solved online. It utilizes the Lagrange multipliers from the bidding problem to ensure that the allocation results correspond to the optimal solution of the bidding problem. The effect of the proposed framework on improving EVA profits and reducing degradation costs is verified in the case study.

0.67

Time to AC-t: When AC-transmission changes capacity expansion planning

eess.SY math.OCphysics.soc-ph ·2026-11-02 ·Lara Booth, Shiva Madadkhani, Ruaridh Macdonald, Priya L. Donti
code/data similarity 0.51
Abstract · 35 pages, 5 figures, 3 tables; plus 16 pages of supplemental information (8 figures, 6 tables). Submitted to Joule

Capacity expansion models often dramatically simplify the physics of how power flows through a transmission network in order to preserve computational tractability. However, with the rapid growth of electrification, large loads, renewables, and storage, increased realism in planning future grids is imperative. We extend the open-source capacity expansion model GenX with AC optimal power flow physics, and analyze generation, storage, and transmission investment decisions for 20-zone, hourly models of Germany and Texas. We compare our results against those using two common approximations, the transport model and DC optimal power flow. We find that total costs and emissions largely agree across all formulations. However, we find substantial differences in outputs related to transmission, generation siting, storage, and reactive-power support between the approximate formulations and the true AC physics formulation. We identify where AC physics changes planning decisions and discuss how to potentially capture these effects without the full computational cost.

0.23