CS Paper Radar

Concept of Time-Reversal Characteristic Modes in Non-Free-Space Environments

Chenbo Shi, Jin Pan

cs.CE ·submitted 2026-08-25 12:36 UTC · v1
unusual

Abstract

Characteristic modes possess a natural environmental interpretation in the current domain because the surrounding scene is carried by the Green function used to construct the impedance operator. An equally direct physical interpretation is less evident in the scattering domain once the background itself participates in propagation and feedback. This paper introduces a field-level definition of time-reversal characteristic modes based on the differential scattered field relative to a prescribed background. A characteristic state is identified when this additional field, after time reversal and propagation through the same background, regenerates the same differential scattering state up to a scalar modal factor. The concept is verified in two distinct non-free-space settings. For a finite structural background, it reproduces established substructure characteristic modes and agrees with a common-origin spherical-wave realization. For a PEC half-space, it agrees with the modes obtained from the half-space Green-function impedance operator, although the infinite plane has no natural finite-object transition matrix. The results show that the physical modal statement can remain unchanged even when the numerical representation of the environment is fundamentally different.

Closest papers

Nearest neighbours by meaning across the whole index.

Physically Consistent Modeling of Dispersive Time-Modulated Reconfigurable Intelligent Surfaces for Wideband OFDM

eess.SP eess.SY ·2026-09-16 ·Ivan Iudice, Donatella Darsena, Giacinto Gelli, Vincenzo Galdi
similarity 0.49
Abstract · 13 pages, 6 figures, 2 tables

The elements of a reconfigurable intelligent surface (RIS) are commonly modeled either as frequency-selective time-invariant reflectors or as instantaneous time-varying reflection coefficients. In practice, however, time-modulated metasurfaces exhibit both frequency selectivity and periodic time variation. We develop a physically consistent linear periodically time-varying (LPTV) model that jointly captures these effects and characterizes their impact on wideband orthogonal frequency-division multiplexing (OFDM) communications. From a canonical equivalent circuit of a generic RIS element, we derive a single-resonance model whose physically meaningful parameters determine both the frequency-selective reflection coefficient and the effective impulse-response duration, i.e., the finite memory of the element. The periodically switched dispersive responses are then represented through harmonic transfer functions, leading to a closed-form per-subcarrier OFDM input-output relation. The resulting coupling is generally non-diagonal: each received subcarrier collects contributions from multiple transmitted subcarriers through the RIS harmonics, each weighted by the element response at the corresponding absolute input frequency. We further derive a generalized cyclic-prefix (CP) condition requiring the guard interval to accommodate both the propagation-channel delay spread and the RIS memory. Under this condition, intersymbol interference and out-of-grid spectral leakage are suppressed, while deterministic on-grid harmonic coupling remains. Full-wave simulations of an OpenRIS unit cell designed for a 5G NR channel validate the proposed resonant model and reveal appreciable in-band dispersion despite nearly ideal binary phase switching. Simulations over 3GPP tapped-delay-line (TDL) channels confirm the generalized CP condition and show its relevance for high-quality-factor RIS elements.

0.27

Finite-Modal Realization and Operator-Norm Convergence of a Source-to-Observation Electromagnetic Scattering Green Operator

cs.IT math-ph ·2026-09-08 ·Zhukang Wang, Da Li, Ruifeng Li, Jinyan Ma, Jiarun Hu +5 more
similarity 0.45
Abstract · 31 pages, 12 figures; supplementary material included

Source-to-observation operators provide reusable environment-level descriptions for multi-query electromagnetic (EM) prediction and communication-mode analysis. However, in practical multiple-scattering models, these operators are represented with finitely many angular modes, and agreement for selected excitations or between successive truncation orders does not establish uniform accuracy of the full map or reliability of its singular channels. To close this gap, we formulate the environment-induced response as a scattering Green operator on fixed continuous source and observation spaces and derive an exact trace-space factorization that reconstructs the Maxwell scattered field. For fixed, pairwise-disjoint enclosing trace spheres and a well-posed collective problem, nested vector spherical wave function (VSWF) realizations converge in operator norm. A structural bound separates external modal tails from collective-resolvent sensitivity, and operator-norm convergence guarantees uniform convergence of the singular values. We further construct a finite metric core that preserves the nonzero singular values of each finite-order operator and reconstructs matched orthonormal source--field channels without introducing external-support discretization degrees of freedom (DoF) into the spectral problem. Full-wave benchmarks verify the finite-order implementation. A controlled near-resonant two-sphere study shows that adjacent-order agreement can precede resolution of the dominant high-order collective direction. It further shows that only part of the internal amplification appears in externally accessible gains and that resonance promotes a distinct high-order channel pair above an otherwise preserved low-order family. The resulting framework provides a convergent, metric-consistent finite-modal representation of multiple-scattering source-to-observation operators and their accessible channels.

0.28

From Multimode Near-Field Coupling to Friis

eess.SP physics.class-ph ·2026-09-16 ·Mats Gustafsson
similarity 0.45
Abstract

Near-field propagation between finite apertures can support multiple spatial channels, while far-field transmission is effectively single mode and follows the Friis transmission formula. This letter establishes a direct connection between these two regimes through the mutual shadow area between the transmitting and receiving apertures. The mutual shadow determines the asymptotic number of spatial degrees of freedom and, in the paraxial regime, leads to a simple beamforming distance that provides a characteristic scale for the transition from multimode to effectively single-mode propagation. The channel singular-value sum rule further shows that, below this distance, increasing separation primarily reduces the number of supported spatial channels while their average normalized strength remains approximately constant. Beyond the transition, the remaining channel strength decreases according to the conventional free-space quadratic power law, recovering the Friis transmission formula. Numerical results for circular apertures demonstrate the transition, the scaling with aperture size, and the dependence on the transmitter and receiver apertures. The mutual-shadow formulation also extends the description beyond the paraxial regime.

0.23

A Projection-Coupled 2.5D THB-GIFT and Quadtree-SBIGA Formulation for Moving-Load Analysis in Semi-Infinite Media

cs.CE ·2026-11-05 ·Hao Hong, Yanhui Zhong, Bei Zhang, Shuo Xu, Minchuan Tan +3 more
benchmarkunusual similarity 0.44
Abstract

Moving loads in semi-infinite media generate extended wave fields while complex local structures require fine geometric and spatial resolution. This paper develops a projection-coupled two-and-a-half-dimensional (2.5D) THB-GIFT and quadtree-SBIGA computational formulation that assigns independent discretizations to these regions. The near-field THB-GIFT representation separates the geometry and analysis spaces and permits hierarchical local refinement, while the bounded propagation domain is discretized by quadtree-SBIGA with unified Bézier trace extraction and connected to the homogeneous unbounded exterior through a scaled-boundary impedance. On a common physical integration partition, an $L^2$ projection maps the nonmatching traces; Hermitian-adjoint force transfer then gives a virtual-work-consistent interface reduction. The regional dynamic operators and moving-load response reconstruction follow a single Fourier convention. Homogeneous half-space comparisons and a cylindrical-cavity analytical solution verify the components and the complete coupled system. In the cavity study, hierarchical THB refinement reduces the displacement error in the target inner band by a factor of approximately $41$. At a specified frequency--wavenumber point in the cavity benchmark, a comparison with matched outer-boundary discretization gives approximately $15\%$ lower sampled full-domain error for the coupled model, using $34\%$ fewer system degrees of freedom and $48\%$ fewer S-elements; the warm per-sample times are similar. A layered pavement with a buried conduit and twin modified-D tunnels demonstrate open, closed and multiple disconnected nonmatching interfaces and the analysis of local structural demand and dynamic interaction under moving loads.

0.27

Time Invariance, Circle Symmetry, and the Completeness of the Cardiff Behavioral Model

eess.SP ·2026-09-22 ·Nicholas B. Tufillaro
theoryunusual similarity 0.44
Abstract · 10 pages, 4 figures, 5 tables. v3: one sentence in Sec. VIII corrected (the multi-harmonic extension uses the single circle, not a torus); r…

Frequency-domain behavioral models of nonlinear microwave devices (the Cardiff model, X-parameters, higher-order sinusoidal describing functions, and the baseband models of power-amplifier predistortion) share one functional form, and each modeling framework justifies the form by its own argument, time invariance among them. Here we give the mathematical argument by which time invariance alone determines the model form, and state the result as a theorem for two-port devices, with its extension to any number of ports. Under a shift of the time origin each harmonic phasor rotates by a multiple of the fundamental's angle, so the spectral map of a time-invariant device is equivariant under a weighted circle action, and classical invariant theory gives its general form. The result is a completeness theorem for the form already in use: every time-invariant two-port response in single-tone periodic steady state is a phase factor attached to the fundamental multiplying a function of the wave magnitudes and their relative phase. The Cardiff exponents become counters: $m$ is the order of the load-side nonlinearity, $n$ is set by the drive-side harmonic, and $r$ is the number of conjugate pairs. The bound $r_{\max}=\lfloor K/2\rfloor$ for a load-side nonlinearity of degree $K$ makes the familiar restriction $r\le1$ a hypothesis about the device, exact for a cubic nonlinearity; for a loaded device the bound becomes a measurable decay in $r$. The results are illustrated with a published measurement and two simulations.

0.52

Diffusion-Based Inverse Design of Dielectric Resonator Metasurfaces for Shaping Smart Electromagnetic Environments

cs.LG physics.app-phphysics.comp-ph ·2026-08-30 ·M. Tsukerman, K. Grotov, D. Vovchuk, P. Ginzburg
similarity 0.43
Abstract

Future wireless systems are expected to transform the surrounding space from a passive propagation medium into a smart electromagnetic environment, where engineered surfaces control wave propagation, support wireless sensing, and create programmable electromagnetic fingerprints. A key challenge in realizing this vision is the inverse design of metasurfaces for tailored electromagnetic propagation. While forward analysis evaluates the response of a known geometry, the inverse task starts from a prescribed scattering signature and seeks a physically realizable structure that produces it. This inverse task is inherently nonlinear and often high-dimensional, while candidate solutions may be non-unique and provide no direct indication of practical realizability. Here, we introduce a conditional diffusion framework for inverse design of dielectric resonator metasurfaces from target angular scattering patterns. Trained on T-matrix simulated geometry-response pairs, the model learns a conditional distribution of geometries instead of a deterministic mapping, enabling multiple candidate designs for the ill-posed inverse problem. The best generated metasurface achieves a mean percentage error of 1.39%, outperforming CMA-ES optimization (4.1% after 10 h) while requiring only about one minute for after-training inference. The model also produces lower error distributions than deterministic neural baselines for out-of-distribution spectra, highlighting the potential of diffusion models for efficient metasurface design.

0.28

Learning qBIC Resonances across Metasurface Families in Dielectric Fourier Space

cs.LG physics.opticsphysics.comp-ph ·2026-10-08 ·Shuangteng Lei, Li Yu, Tianxin Li, Wei Lu
code/dataunusual similarity 0.43
Abstract · 59 pages,5 main figures and 1 main table; includes Supplementary Information with 27 supplementary figures and 3 supplementary tables.v2: Ex…

Bound states in the continuum (BIC) metasurfaces are typically described by geometry-specific parameters, hindering cross-geometry comparison, while ultranarrow quasi-BIC (qBIC) features are easily diluted in full-spectrum learning. Here, we map 2,015 samples from seven dielectric metasurface families onto a shared reciprocal-lattice grid. Two fixed low-order Fourier descriptors capture within-branch resonance shifts, with mean $R^2$ values of 0.871-0.999. Field-level analysis of two representative branches shows that these shifts are consistent with the Maxwell-Fourier perturbation picture. A five-channel Fourier-space backbone models the broadband spectrum. A local resonance expert uses complex Fourier coefficients to parameterize the qBIC resonance through a differentiable Fano layer. The expert reduces resonance-position mean absolute error (MAE) from 3.2 to 0.95 nm and reduces the minimum-transmission MAE by a factor of 14 on a geometry-blocked test set. The same coordinate supports spectrum-to-structure reconstruction.

0.40

Circuit-Based Dispersion Analysis of Periodic Cross-Shaped Unit Cells with Dirac Characteristics

eess.SY ·2026-09-30 ·Mahyar Mehri Pashaki, Mohammad Hossein Koohi Ghamsari, Mohammad Memarian
publishedunusual similarity 0.43
Abstract · 2026 34rd International Conference on Electrical Engineering (ICEE)

In this paper, the dispersion behavior of periodic cross-shaped unit cells is investigated with emphasis on Dirac-type dispersion using an equivalent circuit modeling approach. Two unit-cell geometries, including a simple cross structure and a modified configuration with a central patch, are analyzed using full-wave eigenmode simulations and scattering-parameter-based dispersion extraction. An equivalent circuit model is developed to capture the dominant coupling mechanisms and accurately reproduce the dispersion characteristics near the $Γ$-point. The results demonstrate that the proposed circuit model exhibits good agreement with full-wave simulations and provides a physically intuitive framework for analyzing stopband behavior and mode degeneracy. Furthermore, the limitations of S-parameter-based dispersion extraction in the presence of low-Q radiative modes are highlighted.

0.41