CS Paper Radar

Circuit-Based Dispersion Analysis of Periodic Cross-Shaped Unit Cells with Dirac Characteristics

Mahyar Mehri Pashaki, Mohammad Hossein Koohi Ghamsari, Mohammad Memarian

eess.SY ·submitted 2026-09-30 12:29 UTC · v1
publishedunusual

Abstract

In this paper, the dispersion behavior of periodic cross-shaped unit cells is investigated with emphasis on Dirac-type dispersion using an equivalent circuit modeling approach. Two unit-cell geometries, including a simple cross structure and a modified configuration with a central patch, are analyzed using full-wave eigenmode simulations and scattering-parameter-based dispersion extraction. An equivalent circuit model is developed to capture the dominant coupling mechanisms and accurately reproduce the dispersion characteristics near the $Γ$-point. The results demonstrate that the proposed circuit model exhibits good agreement with full-wave simulations and provides a physically intuitive framework for analyzing stopband behavior and mode degeneracy. Furthermore, the limitations of S-parameter-based dispersion extraction in the presence of low-Q radiative modes are highlighted.

Comment
2026 34rd International Conference on Electrical Engineering (ICEE)
Journal ref
2026 34th International Conference on Electrical Engineering (ICEE), Tehran, Iran, 2026, pp. 1591-1595
DOI
10.1109/ICEE70628.2026.11710478

Closest papers

Nearest neighbours by meaning across the whole index.

Physically Consistent Modeling of Dispersive Time-Modulated Reconfigurable Intelligent Surfaces for Wideband OFDM

eess.SP eess.SY ·2026-09-16 ·Ivan Iudice, Donatella Darsena, Giacinto Gelli, Vincenzo Galdi
similarity 0.44
Abstract · 13 pages, 6 figures, 2 tables

The elements of a reconfigurable intelligent surface (RIS) are commonly modeled either as frequency-selective time-invariant reflectors or as instantaneous time-varying reflection coefficients. In practice, however, time-modulated metasurfaces exhibit both frequency selectivity and periodic time variation. We develop a physically consistent linear periodically time-varying (LPTV) model that jointly captures these effects and characterizes their impact on wideband orthogonal frequency-division multiplexing (OFDM) communications. From a canonical equivalent circuit of a generic RIS element, we derive a single-resonance model whose physically meaningful parameters determine both the frequency-selective reflection coefficient and the effective impulse-response duration, i.e., the finite memory of the element. The periodically switched dispersive responses are then represented through harmonic transfer functions, leading to a closed-form per-subcarrier OFDM input-output relation. The resulting coupling is generally non-diagonal: each received subcarrier collects contributions from multiple transmitted subcarriers through the RIS harmonics, each weighted by the element response at the corresponding absolute input frequency. We further derive a generalized cyclic-prefix (CP) condition requiring the guard interval to accommodate both the propagation-channel delay spread and the RIS memory. Under this condition, intersymbol interference and out-of-grid spectral leakage are suppressed, while deterministic on-grid harmonic coupling remains. Full-wave simulations of an OpenRIS unit cell designed for a 5G NR channel validate the proposed resonant model and reveal appreciable in-band dispersion despite nearly ideal binary phase switching. Simulations over 3GPP tapped-delay-line (TDL) channels confirm the generalized CP condition and show its relevance for high-quality-factor RIS elements.

0.27

Concept of Time-Reversal Characteristic Modes in Non-Free-Space Environments

cs.CE ·2026-08-25 ·Chenbo Shi, Jin Pan
unusual similarity 0.43
Abstract

Characteristic modes possess a natural environmental interpretation in the current domain because the surrounding scene is carried by the Green function used to construct the impedance operator. An equally direct physical interpretation is less evident in the scattering domain once the background itself participates in propagation and feedback. This paper introduces a field-level definition of time-reversal characteristic modes based on the differential scattered field relative to a prescribed background. A characteristic state is identified when this additional field, after time reversal and propagation through the same background, regenerates the same differential scattering state up to a scalar modal factor. The concept is verified in two distinct non-free-space settings. For a finite structural background, it reproduces established substructure characteristic modes and agrees with a common-origin spherical-wave realization. For a PEC half-space, it agrees with the modes obtained from the half-space Green-function impedance operator, although the infinite plane has no natural finite-object transition matrix. The results show that the physical modal statement can remain unchanged even when the numerical representation of the environment is fundamentally different.

0.29

Wideband Terahertz Pinching-Antenna Systems (PASS): Bandwidth Limits, Ergodic Rate, and Placement Optimization

eess.SP ·2026-11-16 ·Almutasem Bellah Enad, Chintha Tellambura, Zhiguo Ding
similarity 0.40
Abstract

Terahertz (THz) bands offer the vast bandwidth that sixth-generation (6G) networks demand, but their severe path loss makes bringing the radiator close to the user decisive. Pinching-antenna systems (PASS) do exactly this, turning path loss into a programmable parameter by sliding radiating points along a dielectric waveguide, which makes THz their native regime. That regime, however, is inherently wideband and the waveguide is dispersive, whereas every existing PASS analysis is single-frequency and assumes a non-dispersive guide. This paper develops the first wideband, dispersion-aware theory of PASS and uncovers a limitation intrinsic to the pinching mechanism. Because co-phasing by physical position equalizes path length only modulo a wavelength, a pinching array is inherently beam-squint limited, and we show its frequency response is a Dirichlet kernel with a closed-form coherence bandwidth and an irreducible dispersion floor that even true-time-delay (TTD) correction cannot remove. A single unifying law governs the behavior, in which array gain trades against both coherence bandwidth and spatial robustness through one invariant that TTD correction breaks, reaching the floor with far fewer delay elements than a conventional array. We further characterize the wideband ergodic rate under random user locations, show that molecular absorption acts as a deterministic taper that multiplies the squint, and derive a simple rule for the rate-optimal number of pinches. Finally, by exploiting the integer structure of co-phasing, we recast the non-convex placement problem as a mixed-integer program that can be solved exactly in polynomial time. Together, these results move PASS from the narrowband, dispersion-blind setting to the wideband, dispersive regime that THz operation actually requires.

0.25

A Wideband STAR-RIS Employing Shared-Aperture Polarization Conversion and Diagonal Switching Topology for 6G Applications

eess.SP ·2026-10-13 ·Ruiqi Wang, Atif Shamim
similarity 0.37
Abstract

Simultaneously transmitting and reflecting reconfigurable intelligent surfaces (STAR-RIS) enable programmable wave control on both sides of a surface, extending wireless coverage beyond single-sided operation. However, practical STAR-RIS demonstrations in literature have narrow bandwidths, because it is challenging to achieve wideband reflection and transmission simultaneously from the same aperture. To overcome this limitation, a wideband STAR-RIS architecture is proposed based on shared-aperture polarization conversion and diagonal switching topology. Here, multiple resonances enable wideband magnitude responses and mirror-symmetric current reversal maintains $180^{\circ}$ phase difference in both reflection and transmission modes. Accordingly, a diagonal four-branch unit cell configuration is developed, where the tailored top patch directs the received wave either through a pair of blind vias connected by a buried strip to the shared top aperture for reflection, or to the bottom ring patch using a through via for transmission. Based on the proposed design, a 10 by 10 STAR-RIS prototype is fabricated and experimentally characterized. The measured 3-dB bandwidths reach 19.8% in reflection mode and 21.9% in transmission mode. Near-field measurements show average signal enhancements of 19.8 and 22.6 dB for reflection and transmission, respectively, over the wide frequency range of 6.8-8.4 GHz. Far-field measurements further demonstrate average received-power enhancements of 11.2 dB in reflection and 11.9 dB in transmission. To the best of the authors' knowledge, this work presents the first experimentally demonstrated wideband STAR-RIS covering the 7.125-8.4 GHz band within the emerging 6G FR3 spectrum.

0.20

Stochastic High-Resolution Parameter-Based Channel Modeling for Sub-Terahertz Outdoor Device-to-Device Propagation at 145 GHz

eess.SP ·2026-11-06 ·Zihang Cheng, Naveed A. Abbasi, Jorge Gomez-Ponce, Jianzhong, Zhang +1 more
published similarity 0.36
Abstract · Currently under submitted and under revision in the IEEE Transactions on Wireless Communications

Since device-to-device (D2D) systems operating in the sub-THz regime are of interest for a variety of 6G applications, modeling their propagation channels is therefore essential. This paper presents high-resolution parameter estimation (HRPE) of specular multipath components (MPCs) as well as diffuse multipath components (DMCs) from an extensive measurement campaign. The extracted MPCs and DMCs are then clustered, and statistical models for both intra- and inter-cluster statistics are established. Among other insights, we find a large number (typically 10-50) of clusters; both the powers and densities of MPCs within each cluster show significant variations. DMC occurs both when associated with discrete MPCs and standalone. The paper provides a complete model that can generate double-directional impulse responses, and a MATLAB program implementing it is made available. Extensive verifications of "derived" (not directly modeled) parameters are provided as well.

0.23

Resolving the Discontinuity of Continuous-Time AFDM Waveforms

eess.SP cs.IT ·2026-09-07 ·Yewen Cao, Yulin Shao
similarity 0.36
Abstract · Keywords: AFDM, continuous-time waveform, SFDM, out-of-band emission

Continuous-time affine frequency division multiplexing (AFDM) waveforms, constructed via frequency wrapping and phase correction, are known to be sample-wise equivalent to the widely adopted discrete AFDM framework. In this paper, we uncover a fundamental and previously overlooked flaw in this construction: its complex envelope is inherently discontinuous for generic chirp parameters. We show that these discontinuities are the direct cause of the high out-of-band emission (OOBE). To resolve this issue, we propose a fundamentally different continuous-time waveform, termed stepped frequency division multiplexing (SFDM). Unlike conventional approaches that allow continuous frequency variation, SFDM freezes the instantaneous frequency at the midpoint of the underlying chirp trajectory within each Nyquist sampling interval. This design yields a complex envelope that is strictly continuous over the entire symbol duration while preserving exact sample-wise equivalence with discrete AFDM. A unified spectral analysis reveals that the superior OOBE performance of SFDM stems from the absence of internal jump discontinuities, which otherwise dominate the far-out spectral roll-off. Numerical results confirm that SFDM consistently achieves significantly lower OOBE across a wide range of chirp rates.

0.23

From Electromagnetic Physics to Intelligent Optimization: A Deterministic Modeling for Indoor Pinching-Antenna Systems

eess.SP ·2026-09-26 ·Qiushi Zhao, Zihan Feng, Ximing Xie, Hao Qin
similarity 0.34
Abstract

Pinching-antenna systems (PASS) enable flexible wireless transmission by activating pinching antennas (PAs) along dielectric waveguides. However, existing PASS analyses commonly rely on tractable analytical or statistical channel abstractions that do not jointly capture in-waveguide field evolution, sequential PA power extraction, and site-specific indoor multipath propagation. This paper develops a physics-driven deterministic framework for end-to-end modeling of indoor PASS. Specifically, the parabolic wave equation (PWE) resolves the position-dependent electromagnetic field inside the dielectric waveguide, and coupled-mode theory (CMT) maps the local guided field to the radiation power and phase of each PA. Ray tracing (RT) subsequently models the site-specific indoor electromagnetic propagation from each PA to the users, including LoS, reflected, and diffracted components. To enable efficient repeated evaluations, we combine a reusable PWE-CMT field representation with a physics-assisted neural-network-based RT surrogate that preserves propagation geometry, visibility, and phase information. The proposed framework achieves a complex-channel NMSE of -19.14 dB while reducing the end-to-end single-link evaluation time from approximately 2.5 s to 77 ms. Its application to single- and multi-user deployment demonstrates that the physical model can be efficiently reused for PA-position and power-allocation optimization while preserving the underlying position-dependent propagation physics.

0.23

Simulator-Refined Diffusion for Radio-Frequency Inverse Design

cs.LG cs.AI ·2026-09-29 ·Jinhao Liang, Jacob K. Christopher, Michael Frei, Tommaso Dreossi, Nando Fioretto
similarity 0.33
Abstract

Diffusion models have shown potential in inverse design of printed circuit boards (PCBs), enabling the generation of layouts conditioned on target S-parameters. Despite this promise, applying diffusion models to PCB layout generation remains challenging due to their difficulty in meeting the quantitative electromagnetic specifications. A common approach is gradient-based guidance, which biases the diffusion sampling process with the gradient of an objective used for evaluation. However, full-wave electromagnetic simulators are accurate but expensive and typically non-differentiable, whereas differentiable surrogates are informative but not always reliable. To address these limitations, this paper proposes Simulator-Refined Diffusion (SRD), a novel combination of a low-fidelity differentiable surrogate and a high-fidelity non-differentiable simulator within the diffusion sampling process. Unlike standard zeroth-order optimization, which requires a great number of random perturbations, our approach uses the surrogate's gradient to propose the perturbation direction while the simulator then searches based on this direction to identify an effective design update. Experimental results across different settings show that this method consistently outperforms current state-of-the-art methods, producing layouts whose simulated S-parameters match the target specifications up to 21.2% closer for in-distribution targets and up to 19.8% for out-of-distribution targets.

0.15