CS Paper Radar

Time Invariance, Circle Symmetry, and the Completeness of the Cardiff Behavioral Model

Nicholas B. Tufillaro

eess.SP ·submitted 2026-09-22 19:41 UTC · v3
theoryunusual

Abstract

Frequency-domain behavioral models of nonlinear microwave devices (the Cardiff model, X-parameters, higher-order sinusoidal describing functions, and the baseband models of power-amplifier predistortion) share one functional form, and each modeling framework justifies the form by its own argument, time invariance among them. Here we give the mathematical argument by which time invariance alone determines the model form, and state the result as a theorem for two-port devices, with its extension to any number of ports. Under a shift of the time origin each harmonic phasor rotates by a multiple of the fundamental's angle, so the spectral map of a time-invariant device is equivariant under a weighted circle action, and classical invariant theory gives its general form. The result is a completeness theorem for the form already in use: every time-invariant two-port response in single-tone periodic steady state is a phase factor attached to the fundamental multiplying a function of the wave magnitudes and their relative phase. The Cardiff exponents become counters: $m$ is the order of the load-side nonlinearity, $n$ is set by the drive-side harmonic, and $r$ is the number of conjugate pairs. The bound $r_{\max}=\lfloor K/2\rfloor$ for a load-side nonlinearity of degree $K$ makes the familiar restriction $r\le1$ a hypothesis about the device, exact for a cubic nonlinearity; for a loaded device the bound becomes a measurable decay in $r$. The results are illustrated with a published measurement and two simulations.

Comment
10 pages, 4 figures, 5 tables. v3: one sentence in Sec. VIII corrected (the multi-harmonic extension uses the single circle, not a torus); running head corrected. v2: prior work attributed; Remark 1 (N ports) added; results unchanged. Companion papers: arXiv:2609.38771, arXiv:2610.01031. Toolkit: doi:10.5281/zenodo.22816760

Closest papers

Nearest neighbours by meaning across the whole index.

Symmetry and the Form of Nonlinear Behavioral Models: A Tutorial for Microwave Engineers

eess.SP ·2026-10-01 ·Nicholas B. Tufillaro
similarity 0.78
Abstract · 25 pages, 7 figures, 4 tables. v3: one sentence in the Scope section corrected (multi-harmonic and multi-port cases use the single circle; o…

Behavioral models of nonlinear microwave devices -- the Cardiff model, X-parameters, the higher-order describing functions of the mechanical-systems literature -- all share a functional form. This tutorial derives that form from time invariance alone. It develops the consequences of that derivation using only the harmonic-balance description of a single-tone periodic steady state, in which each port waveform is a finite set of harmonic phasors, and uses them to give the Cardiff model's three exponents physical interpretations. In the monomial rewriting the magnitude exponent $m$ is the order of the device's load-side nonlinearity; the phase exponent $n$ is set by the drive-side harmonic; and the conjugate index $r$ obeys $r_{\max}=\lfloor K/2\rfloor$, where $K$ is the degree of the load-side nonlinearity. The familiar restriction $r\le1$ is therefore a statement about the device, exact whenever $K\le3$. The final sections show that a tailored A-pull measurement displays this decomposition directly: each spectral cluster's half-width is the order of the nonlinearity that produced it. The tutorial is pedagogical and is meant as a gentler introduction to the results treated in the companion paper "Time invariance, circle symmetry, and the completeness of the Cardiff behavioral model", which states and proves the theorems in full.

0.35

Memory in Behavioral Models as Motion on a Slow Invariant Manifold

eess.SP math.DS ·2026-09-30 ·Nicholas B. Tufillaro
unusual similarity 0.51
Abstract · 10 pages, 2 figures, 3 tables. v2: prior work attributed (the hidden-variable formulation of Root et al.; the dynamic gain model of Verspech…

A single-tone large-signal operating point of a nonlinear two-port is a periodic orbit of a periodically forced circuit. When the device has memory, the Floquet exponents of that orbit separate into fast (electrical) and slow (thermal and trapping) modes, and long-term memory is motion on the invariant manifold attached to the slow modes. Existence and uniqueness of that manifold follow from the parameterization method of Cabré, Fontich and de la Llave, applied to the stroboscopic map at the orbit; the manifold is the spectral submanifold of Haller and Ponsioen, without a small-forcing parameter. The manifold is a bundle over the circle of drive phase, its fiber dimension the number of slow exponents, and the dynamic X-parameter kernel of Verspecht et al. identifies its reduced dynamics from the transient after a step in drive amplitude. An exact reduced model has one memory state per slow exponent, the memoryless X-parameter surface is the fixed-point family of the reduced dynamics, and the envelope-domain model is the reduced dynamics driven by the envelope. The hypotheses are verified and the manifold constructed for a GaN HEMT compact model with thermal and trap memory: the trap's time constant at the operating point, $14 μ$s, is set by the linearization, not by its $6$ ms emission time, and the trap's nonlinearity confines a polynomial representation of the manifold to a few millivolts of drive, so trap memory must be represented over the operating range, by tables or a fitted network, not by an expansion about the operating point.

0.53

Equivalent DQ Sequence-Domain Model of Unbalanced Three-Phase Passive Elements for Power Converter Controllers

eess.SY ·2026-09-01 ·Air\án Franc\és, Luis Saz, Rafael Castillo, Dionisio Ramirez, Javier Uceda
publishedtheoryhighly cited similarity 0.46
Abstract · 8 pages, 7 figures, 2023 IEEE Applied Power Electronics Conference and Exposition (APEC)

Equivalent dq0 models of three-phase passive impedances are widely used for the design of three-phase inverter and rectifier controllers in the synchronous frame. However, these equivalent models assume that the impedance in each phase are the same, which is not always applicable. The fact that the impedance in each phase is different, generates second order harmonic content in the dq0 components, which hinders the advantages of the dq0 transformation. To avoid the second harmonic in these scenarios, it is possible to use the Fortescue's theorem to represent any asymmetrical set of three-phase signals as a linear combination of three symmetrical sequences. In the literature, only a few works have attempted to derive the equivalent model of unbalanced three-phase passive elements in the sequence domain, and none is able to account for the interaction between the zero sequence and the positive and negative sequences. This work presents the derivation of the equivalent dq sequence-domain model of unbalanced three-phase passive elements both analytically and with an intuitive graphical approach. Experimental results are shown to validate the proposed models.

0.73

Identification of $dq$-Asymmetric Impedances as Complex Transfer Functions Using a Single Arbitrary Excitation

eess.SP eess.SY ·2026-08-30 ·Mohamed Abdalmoaty, Zheran Zeng, Dongsheng Yang, Florian Dörfler
similarity 0.44
Abstract

Cross-coupling between the $dq$ coordinates makes the identification of asymmetric grid impedances a challenging problem, particularly near the fundamental frequency where the asymmetric coupling is strongest. Existing schemes usually handle it either by perturbing the two coordinates sequentially, which lengthens the measurement, or by using a time-domain method with a global parametric model whose order must be tuned. This paper develops a single-shot active non-parametric frequency-domain method that avoids both. The equivalent impedance is parameterized by a pair of single-input single-output complex transfer functions. Each spectral line is fitted with a local rational model; the leakage and transient contributions are estimated, so that neither periodic steady-state excitation nor repeated excitation cycles are required. We give the exact finite-time discrete Fourier transform relation for the conjugate-coupled complex-signal model, and analyse the distortion that a stationary-frame filter placed ahead of the Park transform imposes on the identified pair. The method is validated on a controller hardware-in-the-loop platform against an analytically derived small-signal model, for a symmetric grid and for the same grid with an added grid-following converter that renders it asymmetric. Both complex transfer functions and all four real transfer functions of the $dq$ impedance are recovered over a wide band from a single one-second record of a random excitation, at 1 Hz resolution.

0.26

Concept of Time-Reversal Characteristic Modes in Non-Free-Space Environments

cs.CE ·2026-08-25 ·Chenbo Shi, Jin Pan
unusual similarity 0.44
Abstract

Characteristic modes possess a natural environmental interpretation in the current domain because the surrounding scene is carried by the Green function used to construct the impedance operator. An equally direct physical interpretation is less evident in the scattering domain once the background itself participates in propagation and feedback. This paper introduces a field-level definition of time-reversal characteristic modes based on the differential scattered field relative to a prescribed background. A characteristic state is identified when this additional field, after time reversal and propagation through the same background, regenerates the same differential scattering state up to a scalar modal factor. The concept is verified in two distinct non-free-space settings. For a finite structural background, it reproduces established substructure characteristic modes and agrees with a common-origin spherical-wave realization. For a PEC half-space, it agrees with the modes obtained from the half-space Green-function impedance operator, although the infinite plane has no natural finite-object transition matrix. The results show that the physical modal statement can remain unchanged even when the numerical representation of the environment is fundamentally different.

0.29

Time-Domain Data-Driven Loewner Reduced-Order Models for Electromagnetic Simulation

eess.SP physics.comp-ph ·2026-10-15 ·Pablo Biurrun, Carlos J. Ramos-Salas, Luis D. Angulo, Valentin de la Rubia
similarity 0.43
Abstract

This paper presents a data-driven Loewner framework for constructing reduced-order models (ROMs) from time-domain electromagnetic (EM) simulation data. High-fidelity simulation of microwave devices can be computationally expensive, particularly when fine spatial discretization and long observation windows are required. The proposed method uses transient input-output data to construct Loewner and shifted Loewner matrices, from which a reduced descriptor realization is obtained through singular value decomposition (SVD). The resulting models are identified from a limited training window and used to predict responses over substantially longer time intervals, with prediction windows up to 50 times the duration of the training window. The method is formalized as an explicit, reproducible algorithm and validated against full-order simulations for four microwave structures: a substrate-integrated-waveguide filter, a frequency-selective surface, an evanescent-mode coaxial comb-line filter, and a diplexer. The results demonstrate the potential of Loewner-based identification to provide compact models of electromagnetic responses while reducing the need for repeated full-order simulation.

0.23

Harmonic Stability of Power Systems: A Control-Theoretic Definition and Assessment Criteria

eess.SY ·2026-08-20 ·N. Bhoir, A. Sarkar, J. E. Machado, J. Schiffer
similarity 0.43
Abstract

Harmonic interactions have become a defining dynamic stability phenomenon in converter-based power systems (CBPSs). However, a formalization of the notion of harmonic stability in the context of nonlinear dynamical systems is not available thus far. In this paper, we propose a definition of harmonic stability formulated as a combination of two standard stability notions, namely, bounded-input bounded-output (BIBO) and internal stability properties with respect to any nominal periodic trajectory. Moreover, we rigorously show that the local harmonic stability of any nominal periodic trajectory of nonlinear CBPSs is implied by the stability properties of its linear time-periodic (LTP) approximation. In addition, to enable computationally tractable stability assessment, we develop a framework based on harmonic state-space (HSS) representations of LTP models. In particular, we provide time-invariant linear matrix inequality (LMI) conditions to certify harmonic stability. The proposed methodology is illustrated on a grid-following converter system, where the HSS-based analysis numerically confirms harmonic stability around the periodic operating trajectory.

0.29

The geometric Laplace transform: Definition, existence and properties of the Geometric Algebra Laplace transform

eess.SY math.OC ·2026-08-18 ·Manel Velasco, Arnau Dòria-Cerezo, Isiah Zaplana
unusual similarity 0.43
Abstract · 42 pages, 0 figures

Recent publications have started to explore the application of Geometric Algebra (GA) to the modeling, analysis and control of dynamical systems and, in particular, electrical circuits. Since a crucial element there is to transform the ordinary differential equations governing the dynamical system which models the systems' behavior from the real domain to the Laplace domain, a definition of the Laplace transform in GA is needed. In the present work, we extend previous works dealing with extension to some hiper-complex algebras by introducing a definition of the Laplace transform within the framework of Geometric Algebra (GA). In particular, our definition and its properties are applicable to geometric algebras with signature lower or equal than 5.

0.31