CS Paper Radar

The geometric Laplace transform: Definition, existence and properties of the Geometric Algebra Laplace transform

Manel Velasco, Arnau Dòria-Cerezo, Isiah Zaplana

eess.SY math.OC ·submitted 2026-08-18 17:38 UTC · v1
unusual

Abstract

Recent publications have started to explore the application of Geometric Algebra (GA) to the modeling, analysis and control of dynamical systems and, in particular, electrical circuits. Since a crucial element there is to transform the ordinary differential equations governing the dynamical system which models the systems' behavior from the real domain to the Laplace domain, a definition of the Laplace transform in GA is needed. In the present work, we extend previous works dealing with extension to some hiper-complex algebras by introducing a definition of the Laplace transform within the framework of Geometric Algebra (GA). In particular, our definition and its properties are applicable to geometric algebras with signature lower or equal than 5.

Comment
42 pages, 0 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Multivariable Geometric Laplace Transform and Fault Detection in Distributed-Converter Lines

eess.SY eess.SP ·2026-09-02 ·Francisco Manuel Arrabal-Campos, Francisco G. Montoya, Santiago Sánchez-Acevedo, Raymundo E. Torres-Olguin, Alfredo Alcayde
code/data similarity 0.63
Abstract · 56 pages, 13 figures, 5 tables. Code and data available at https://github.com/fmarrabal/geo-laplace-distributed-converters

Monitoring a DC line with many distributed power converters is a genuinely spatio-temporal problem: the information about a localized fault travels along the whole conductor and reaches a few measurement points mixed with the dynamics of the line itself. This paper develops a two-dimensional geometric Laplace transform (t,x) -> (s_t,s_x) over a commutative subalgebra of the geometric algebra Cl(4,0), isomorphic to Segre's bicomplex numbers, in which two bivectors B_t and B_x act as independent imaginary units for the temporal and the spatial phase. Because the two phases live in algebraically distinguishable planes, a fault at position x_f leaves a transformed residual that factorizes as F_f(s_t) e^{-s_x x_f}: its temporal nature stays in the first factor and its location can be read as a geometric argument of the second. On this representation we build a transmission-line model of the converter line and its space-time dispersion relation, a distributed control by admittance shaping, including an exact treatment of discrete converter sites (spatial sampling, aliasing, and a per-converter droop realization that is exact on the sub-Nyquist band), and a fault diagnosis chain that detects, localizes and classifies injection-loss, shunt, sensor and local-controller faults, extends to multiple simultaneous faults with automatic order selection, and distinguishes the outage of a plant from a cable defect. As an integral object the transform is known in bicomplex analysis, and with a single independent variable it reduces to the complex Laplace transform; the contribution lies in its geometric embedding and in its operational use for fault diagnosis in distributed-converter networks. All results are reproduced by an accompanying open implementation.

0.32

A rock-paper-scissors Mandelbrot set

cs.MS math.DSmath.CVmath.RA ·2026-08-19 ·Charlotte Aten
similarity 0.48
Abstract

The titular object of this paper is an analogue of the Mandelbrot set over the 3-dimensional real algebra whose multiplication is the bilinear extension of the rock-paper-scissors operation. In order to study the dynamics of the mappings $x\mapsto x^2+c$ in this setting, a notion of holomorphy for functions on general finite-dimensional real algebras is introduced. Under a mild assumption it is shown that for such algebras holomorphy is always equivalent to solving a finite system of linear first-order PDEs generalizing the Cauchy-Riemann equations. Code is provided for generating animations of these fractals and for exploring them in a video game format.

0.25

Introducing Barik transform and Barik eliminant: novel tools for solving polynomial equations in the sine and cosine of one variable

cs.SC ·2026-10-27 ·Sandipan Bandyopadhyay
unusual similarity 0.47
Abstract

Systems of trigonometric equations appear frequently in problems related to geometry, kinematics, computer graphics, robotics, and astronomy, among many other fields. Most often, these are first converted to algebraic equations via the "tangent half-angle" substitution and solved subsequently using various algebraic methods, such as computation of resultants or Gröbner bases. In the process, parametric singularities are introduced in the equations, and their degrees are also doubled. In this article, a novel concept called the "Barik transform" is introduced, which can help solve such a system without encountering these issues, albeit only in systems that contain at least one equation of the first degree in the sine and cosine of the variable to be eliminated. It is shown how Barik transform can produce extremely compact eliminants in closed form, without resorting to any resultant computation.

0.27

Inverse kinematic solution for generic 3R positional robots using Conformal Geometric Algebra

cs.RO ·2026-08-31 ·Abhilash Nayak, Durgesh Haribhau Salunkhe
publishedunusual similarity 0.43
Abstract

The inverse kinematics of generic 3R robots has been investigated through multiple approaches, mainly algebraic methods involving the solution of certain equation sets. Previous geometric interpretations of the solution, characterized as the intersection of a pair of conics have been confined to the joint-space domain. In this article, we study the Inverse Kinematic Model (IKM) of 3R robots, using the advantages of Conformal Geometric Algebra (CGA) to provide further insights on its kinematic properties. Our approach directly yields a univariate polynomial in terms of theta_2 without the need to eliminate theta_1 and theta_3 by reframing the problem as the intersection of two circles, which are fundamental elements within this algebraic framework.

0.50

Time Invariance, Circle Symmetry, and the Completeness of the Cardiff Behavioral Model

eess.SP ·2026-09-22 ·Nicholas B. Tufillaro
theoryunusual similarity 0.43
Abstract · 10 pages, 4 figures, 5 tables. v3: one sentence in Sec. VIII corrected (the multi-harmonic extension uses the single circle, not a torus); r…

Frequency-domain behavioral models of nonlinear microwave devices (the Cardiff model, X-parameters, higher-order sinusoidal describing functions, and the baseband models of power-amplifier predistortion) share one functional form, and each modeling framework justifies the form by its own argument, time invariance among them. Here we give the mathematical argument by which time invariance alone determines the model form, and state the result as a theorem for two-port devices, with its extension to any number of ports. Under a shift of the time origin each harmonic phasor rotates by a multiple of the fundamental's angle, so the spectral map of a time-invariant device is equivariant under a weighted circle action, and classical invariant theory gives its general form. The result is a completeness theorem for the form already in use: every time-invariant two-port response in single-tone periodic steady state is a phase factor attached to the fundamental multiplying a function of the wave magnitudes and their relative phase. The Cardiff exponents become counters: $m$ is the order of the load-side nonlinearity, $n$ is set by the drive-side harmonic, and $r$ is the number of conjugate pairs. The bound $r_{\max}=\lfloor K/2\rfloor$ for a load-side nonlinearity of degree $K$ makes the familiar restriction $r\le1$ a hypothesis about the device, exact for a cubic nonlinearity; for a loaded device the bound becomes a measurable decay in $r$. The results are illustrated with a published measurement and two simulations.

0.52

From Rigid to Adiabatic: Canonical Regularization of AC Networks via Action-Angle Variables

eess.SY ·2026-08-29 ·Feng Ji, Lu Gao, Lihui Yang
similarity 0.43
Abstract

Traditional power system analysis relies on timescale separation and the rigid-network assumption, freezing electromagnetic transients into algebraic power-flow equations via Steinmetz's phasor theory. As grid-forming converter penetration increases, magnetic energy dynamics on transmission lines interact with converter control loops on comparable timescales, challenging this rigid-network assumption. Returning to Faraday's law of electromagnetic induction driven by rotating magnetic fields, this paper models the transmission lines' rotating magnetic fields in action-angle canonical coordinates, regularizes the rigid algebraic constraints of power-flow equations into canonical equations on adiabatic symplectic manifolds, and establishes a port-Hamiltonian standard form for AC power grids. Based on the minimal-counterexample principle and using the equal-area criterion's classical two-machine system, this paper reveals a latitudinal instability channel via Bloch-sphere coordinates: Q-V control releases voltage-amplitude freedom, shifting the stability boundary from the equatorial UEP (unstable equilibrium point) to a saddle point, thereby unifying the analytical frameworks of P-delta angle stability and Q-V voltage stability in power system analysis.

0.27

Computing Scaled Relative Graphs of Discrete-Time LTI Systems: A Frequency-Domain Approach

eess.SY ·2026-09-29 ·Guoming Shi, Fredy Ruiz
similarity 0.42
Abstract

The scaled relative graph (SRG) represents the joint gain and phase properties of an input--output operator in the complex plane. This paper characterizes the SRG closure of causal, stable, square discrete-time linear time-invariant (LTI) systems on one-sided square-summable sequences. The Beltrami--Klein image of this closure equals the convex hull of the numerical ranges of the transformed frequency-response matrices. For real-coefficient single-input single-output systems, this yields the hyperbolic convex hull of the discrete-time Nyquist locus. The proof addresses the Hardy-space restriction imposed by one-sided inputs, which excludes persistent sinusoids, by replacing them with explicitly constructed finite-duration sinusoids. This construction shows how points in frequency-wise SRGs arise as limits of operator SRG points generated by admissible inputs. The characterization enables model-based computation of the closure from a state-space realization using frequency-response evaluations, numerical ranges, and planar convex hulls, without solving linear matrix inequalities.

0.52

Geometric Algebra for Neural Networks: A Survey

eess.IV stat.ML ·2026-10-21 ·Tao Zhong, Kaison Fong, Keqin Wang, Christine Allen-Blanchette
surveyunusual similarity 0.42
Abstract · 38 pages, 5 figures

Geometric algebra (GA) unifies geometric primitives and transformations in a single algebraic framework. Neural networks designed around this framework often represent features as multivectors and constrain layer operations to respect the algebraic structure, enabling principled treatment of geometric transformations and, in many cases, built-in equivariance. This survey reviews geometric algebra neural networks, including their building blocks, equivariant properties, application domains, empirical performance, and software support. We provide an algebra-selection guide, an empirical comparison of GA-based and other equivariant architectures, and a failure-mode analysis covering training pathologies, deployment constraints, and performance limitations. Across the surveyed literature, the strongest evidence for GA-based architectures appears in settings with explicit geometric symmetries and heterogeneous geometric entities; evidence for broader advantages in parameter efficiency, interpretability, and dense prediction is comparatively limited and uneven. We therefore conclude that geometric algebra neural networks are not universally superior to well-tuned non-GA equivariant baselines, and outline open problems in algebra selection, numerical stability, scalable implementation, and reproducible evaluation.

0.27