CS Paper Radar

Symmetry and the Form of Nonlinear Behavioral Models: A Tutorial for Microwave Engineers

Nicholas B. Tufillaro

eess.SP ·submitted 2026-10-01 04:18 UTC · v3

Abstract

Behavioral models of nonlinear microwave devices -- the Cardiff model, X-parameters, the higher-order describing functions of the mechanical-systems literature -- all share a functional form. This tutorial derives that form from time invariance alone. It develops the consequences of that derivation using only the harmonic-balance description of a single-tone periodic steady state, in which each port waveform is a finite set of harmonic phasors, and uses them to give the Cardiff model's three exponents physical interpretations. In the monomial rewriting the magnitude exponent $m$ is the order of the device's load-side nonlinearity; the phase exponent $n$ is set by the drive-side harmonic; and the conjugate index $r$ obeys $r_{\max}=\lfloor K/2\rfloor$, where $K$ is the degree of the load-side nonlinearity. The familiar restriction $r\le1$ is therefore a statement about the device, exact whenever $K\le3$. The final sections show that a tailored A-pull measurement displays this decomposition directly: each spectral cluster's half-width is the order of the nonlinearity that produced it. The tutorial is pedagogical and is meant as a gentler introduction to the results treated in the companion paper "Time invariance, circle symmetry, and the completeness of the Cardiff behavioral model", which states and proves the theorems in full.

Comment
25 pages, 7 figures, 4 tables. v3: one sentence in the Scope section corrected (multi-harmonic and multi-port cases use the single circle; only incommensurate tones need a torus). v2: prior work attributed; wording revised; results unchanged. Companion to arXiv:2609.35828, arXiv:2609.38771. Toolkit: doi:10.5281/zenodo.22816760

Closest papers

Nearest neighbours by meaning across the whole index.

Time Invariance, Circle Symmetry, and the Completeness of the Cardiff Behavioral Model

eess.SP ·2026-09-22 ·Nicholas B. Tufillaro
theoryunusual similarity 0.78
Abstract · 10 pages, 4 figures, 5 tables. v3: one sentence in Sec. VIII corrected (the multi-harmonic extension uses the single circle, not a torus); r…

Frequency-domain behavioral models of nonlinear microwave devices (the Cardiff model, X-parameters, higher-order sinusoidal describing functions, and the baseband models of power-amplifier predistortion) share one functional form, and each modeling framework justifies the form by its own argument, time invariance among them. Here we give the mathematical argument by which time invariance alone determines the model form, and state the result as a theorem for two-port devices, with its extension to any number of ports. Under a shift of the time origin each harmonic phasor rotates by a multiple of the fundamental's angle, so the spectral map of a time-invariant device is equivariant under a weighted circle action, and classical invariant theory gives its general form. The result is a completeness theorem for the form already in use: every time-invariant two-port response in single-tone periodic steady state is a phase factor attached to the fundamental multiplying a function of the wave magnitudes and their relative phase. The Cardiff exponents become counters: $m$ is the order of the load-side nonlinearity, $n$ is set by the drive-side harmonic, and $r$ is the number of conjugate pairs. The bound $r_{\max}=\lfloor K/2\rfloor$ for a load-side nonlinearity of degree $K$ makes the familiar restriction $r\le1$ a hypothesis about the device, exact for a cubic nonlinearity; for a loaded device the bound becomes a measurable decay in $r$. The results are illustrated with a published measurement and two simulations.

0.52

Reactive Power Beyond Sinusoids: Scalar Measurement Readouts and Information Limits

eess.SY ·2026-09-21 ·Kai Sun
unusual similarity 0.48
Abstract

Reactive power is not uniquely defined for nonsinusoidal voltage and current waveforms because different scalar readouts can assign different values to the same measured voltage--current waveform pair. This paper characterizes which scalar readouts are selected by specific measurement and physical requirements, and quantifies the current information lost through scalarization. The scalar readout is first restricted by requiring bilinearity, alternation, and invariance to the measurement time origin. Requiring it to vanish for all smooth, strictly monotone, time-invariant memoryless resistors then forces the harmonic weights to be proportional to harmonic order. With consistency across harmonic cutoffs and fundamental-frequency calibration, this uniquely yields the classical derivative, or Iliovici-type, scalar within the stated class. The selected weighting is also incompatible with conventional reactive-power calibration independently at every harmonic. Furthermore, for known nonzero voltage, active power and a finite set of skew scalar readouts leave an affine family of compatible currents of exact dimension \(d-1-r_v\). These results establish explicit selection and information-loss limits for scalar reactive-power measurements under nonsinusoidal conditions.

0.46

Equivalent DQ Sequence-Domain Model of Unbalanced Three-Phase Passive Elements for Power Converter Controllers

eess.SY ·2026-09-01 ·Air\án Franc\és, Luis Saz, Rafael Castillo, Dionisio Ramirez, Javier Uceda
publishedtheoryhighly cited similarity 0.48
Abstract · 8 pages, 7 figures, 2023 IEEE Applied Power Electronics Conference and Exposition (APEC)

Equivalent dq0 models of three-phase passive impedances are widely used for the design of three-phase inverter and rectifier controllers in the synchronous frame. However, these equivalent models assume that the impedance in each phase are the same, which is not always applicable. The fact that the impedance in each phase is different, generates second order harmonic content in the dq0 components, which hinders the advantages of the dq0 transformation. To avoid the second harmonic in these scenarios, it is possible to use the Fortescue's theorem to represent any asymmetrical set of three-phase signals as a linear combination of three symmetrical sequences. In the literature, only a few works have attempted to derive the equivalent model of unbalanced three-phase passive elements in the sequence domain, and none is able to account for the interaction between the zero sequence and the positive and negative sequences. This work presents the derivation of the equivalent dq sequence-domain model of unbalanced three-phase passive elements both analytically and with an intuitive graphical approach. Experimental results are shown to validate the proposed models.

0.73

Frequency-Frame Covariance for Reactive-Power Scalarization

eess.SP eess.SYmath-ph ·2026-11-04 ·Kai Sun
similarity 0.44
Abstract

Measured voltage and current waveforms may be represented in a reference frame whose frequency differs from the physical fundamental frequency. Reactive-power readouts calculated from such frequency-shifted coordinates may change if their readout operators are not transformed consistently. This paper presents a frequency-frame covariance formulation for finite-spectrum, zero-mean periodic waveforms with complete harmonic information over one physical period. A necessary and sufficient covariance condition is derived, requiring the readout operator to transform consistently with the waveform representation. Consequently, frequency-dependent harmonic weights must be evaluated at physical harmonic orders rather than relative frame labels. In particular, the derivative/Iliovici readout equals a relative-derivative contribution plus an explicit reference contribution. The formulation also separates readout-operator errors from errors caused by changes in the physical components retained by waveform projections. Three analytical cases illustrate conditional carrier recovery for a memoryless resistor, physical-frequency weighting at relative zero in an RLC branch, and the possibility that an exact reactive-power scalar can coexist with a substantial waveform error after projection. The scope is deterministic calculation consistency in frequency-shifted coordinates rather than instrument measurement uncertainty.

0.13

Three Machines Suffice for Local Hardening of Electromechanical Oscillations

eess.SY math.DS ·2026-10-17 ·Kai Sun
unusual similarity 0.44
Abstract

The single-degree-of-freedom swing equation with sinusoidal coupling is locally softening: its oscillation frequency decreases with oscillation level near a stable equilibrium. Nonlinear modal interaction, however, can reverse this trend in multimachine systems. This letter gives a necessary-and-sufficient condition for strict leading-order local hardening, measured with respect to canonical action, in two symmetric three-machine operating-point families with equal or opposite power injections at the equal-inertia machines. An exact two-coordinate reduction expresses the condition in terms of a squared modal-frequency ratio and a dimensionless nonlinear coupling measure. The proof retains the induced mean shift and second harmonic and shows that the companion modal family remains locally softening. The criterion recovers both an equal-inertia hardening example and an exact large-inertia threshold. Coherent aggregation recovers the two-machine softening law, whereas the infinite-bus limit retains two dynamic rotor angles and permits hardening. An exact coherent-group extension preserves the selected periodic family, frequency, and canonical action for every finite machine count greater than two. Thus, three finite-inertia machines are the minimum permitting local hardening in the stated undamped, lossless classical model.

0.24

The Analytical Investigation of Inductor-Coupled Mixers

cs.AR ·2026-10-24 ·Arash Ghasemi
unusual similarity 0.42
Abstract · 32 pages, 7 figures. Data and code: https://doi.org/10.5281/zenodo.23608384

Inductor- and transformer-coupled balanced mixers are usually analyzed with switching approximations, conversion matrices, harmonic balance, or circuit simulation. This paper instead derives their loaded quasistatic equations from the device laws, keeping the transformer ratios, reflected load, bias, and the connections that set the IF common mode. The functions needed to solve these equations are surprisingly varied. A Shockley single-balanced pair is solved by the principal Lambert function $W_0$ under a quantified one-diode-dominance condition. The double-balanced ring has a unique loaded solution that reduces to an exact inverse-hyperbolic-tangent form only for an open IF port. Vacuum diodes and triodes lead to Cardano cubics and structured sextics, whereas depletion JFET/MESFET crossbars need only square roots. Bilateral MOS channels give piecewise quadratics in strong inversion, or a Ferrari quartic when the IF winding floats. In weak inversion they give an exact $W_0$, the real $r$-Lambert function, or the inverse of $\sinh x+ρx$, depending on topology and IF connection. In matched BJT and HBT Gilbert cells, equal emitter resistors turn the hyperbolic-tangent current steering into an exact $r$-Lambert function. Fourier projection brings in Beta/Gamma, modified Bessel, and complete elliptic functions. We checked the equations against 37 LTspice simulations using seven independent Python programs. In the 12 primary comparisons, which implement the assumed device laws exactly, every RMS waveform error was below 0.017% of the analytical RMS value; built-in and vendor device models were examined separately. Two design examples show how the closed forms size a thermionic IF load and a Gilbert-cell tail current without parameter sweeps.

0.40

Harmonic Stability of Power Systems: A Control-Theoretic Definition and Assessment Criteria

eess.SY ·2026-08-20 ·N. Bhoir, A. Sarkar, J. E. Machado, J. Schiffer
similarity 0.41
Abstract

Harmonic interactions have become a defining dynamic stability phenomenon in converter-based power systems (CBPSs). However, a formalization of the notion of harmonic stability in the context of nonlinear dynamical systems is not available thus far. In this paper, we propose a definition of harmonic stability formulated as a combination of two standard stability notions, namely, bounded-input bounded-output (BIBO) and internal stability properties with respect to any nominal periodic trajectory. Moreover, we rigorously show that the local harmonic stability of any nominal periodic trajectory of nonlinear CBPSs is implied by the stability properties of its linear time-periodic (LTP) approximation. In addition, to enable computationally tractable stability assessment, we develop a framework based on harmonic state-space (HSS) representations of LTP models. In particular, we provide time-invariant linear matrix inequality (LMI) conditions to certify harmonic stability. The proposed methodology is illustrated on a grid-following converter system, where the HSS-based analysis numerically confirms harmonic stability around the periodic operating trajectory.

0.29

Characterisation of the DQsym Framework Against Harmonic State-Space and Dynamic Phasor Models for Modular Multilevel Converters

eess.SY ·2026-11-13 ·Saif Alsarayreh, Robert Dimitrovski, Aleksandra Lekic'
similarity 0.41
Abstract · Submitted to the 25th IET International Conference on AC and DC Power Transmission

Modern power systems rely on power converters that exhibit multifrequency periodic dynamics, such as modular multilevel converters (MMCs). Such converters are commonly analysed using harmonic state-space (HSS) and dynamic phasor (DP) representations. Both approaches rely on building state matrices based on the system topology, whose size grows with the number of harmonics retained in the model. This paper shows that a symmetrical direct-quadrature (dq) dynamic phasor formulation for time-domain simulation, named DQsym, has a smaller solver state matrix than HSS and DP, and whose size is independent of the truncation order K. This reduction results from evaluating harmonic coupling outside the state matrix, in the nonlinear signal blocks. The open-loop MMC model used in this paper is derived in three harmonic-domain (HD) formulations and validated against a three-phase time-domain reference model. The models are compared in terms of state-space size and sparsity, harmonic content, steady-state accuracy and eigenvalues. For truncation at K = 4, the DQsym solver has 45 states against 135 for HSS and DP, stays within about 4% of the reference, and, once closed with its coupling blocks, yields eigenvalues identical to those of HSS and DP.

0.23