CS Paper Radar

Autonomous path following using data-driven predictive control

Josip Kir Hromatko, Marko Švec, Šandor Ileš

eess.SY ·submitted 2026-08-25 13:25 UTC · v1
published

Abstract

Predictive control based on an informative system trajectory, instead of a physics-based model, has received significant attention in recent years. This paper investigates the potential of using such data-driven control for vehicle dynamics control and autonomous path following. By considering the path following problem in the error space, the underlying system is approximately linear and existing results for data-driven predictive control can be applied. Also, scheduling based on longitudinal speed can be readily included. The proposed control algorithm was tested on two different lane change maneuvers in a high-fidelity simulation environment.

Comment
6 pages, 6 figures
Journal ref
Proc. 2023 27th Int. Conf. Syst. Theory Control Comput. (ICSTCC), 2023, pp. 368-373
DOI
10.1109/ICSTCC59206.2023.10308482

Closest papers

Nearest neighbours by meaning across the whole index.

Decision Making and Ride Comfort Evaluation Based on Lane-Change Prediction for Autonomous Vehicles

cs.RO cs.AIcs.LG ·2026-10-21 ·Mohamed Manzour, Aditya Kumar, Rubén Izquierdo, Miguel Ángel Sotelo
similarity 0.62
Abstract

Predicting surrounding vehicles' lane-change intentions enables autonomous vehicles to anticipate potential hazards and respond proactively rather than relying solely on reactive maneuvers. This study investigates the benefits of integrating lane-change prediction, based on knowledge graph embeddings and Bayesian inference, into autonomous vehicle decision-making. Three driving strategies are evaluated in risky merging scenarios simulated in CARLA: reactive driving, prediction-based longitudinal action, and prediction-based lateral action. The proposed prediction model anticipates the surrounding vehicle's lane change approximately 3-4 seconds before its occurrence, allowing the ego vehicle to adjust its behavior accordingly. In the representative simulation records, reactive driving results in a collision accompanied by aggressive deceleration. In contrast, prediction-based longitudinal action initiates early braking to establish a safe gap, while prediction-based lateral action performs a lane change when a safe adjacent lane is available. Both predictive strategies avoid collisions in the evaluated records. Compared with reactive driving, peak deceleration before impact is reduced by 31.5% with longitudinal action and 91.0% with lateral action. Additionally, an ISO 2631-1-based horizontal vibration estimate is used to provide a ride comfort assessment. Overall, the results highlight the potential of lane-change prediction to support safer and smoother driving through proactive decision-making, with additional insights into ride comfort provided by vibration-based estimates.

0.26

Driving Context-guided Model Predictive Planning and Control for Autonomous Car Racing at the Limit and Beyond

cs.RO eess.SY ·2026-09-11 ·Ayoub Raji, Federico Sacco, Nicola Musiu, Marko Bertogna
published similarity 0.62
Abstract · Accepted to IEEE/RSJ International Conference on Intelligent Robots & Systems - IROS 2026

This paper presents a Model Predictive Control-based motion planning and control pipeline for autonomous car racing capable of adapting to different driving contexts, such as overtaking, nominal driving, and countersteering. A Cost Blending state machine manages the identification of different driving contexts and the selection of their predefined weights to be applied to the Model Predictive Planning (MPP) and Control (MPC) modules. The two optimization-based solutions share the same problem formulation and model, differing only in horizon length, rate, tuning, and in their open-loop versus closed-loop approach to maximize the effectiveness of their interaction. The work is validated on the fully autonomous open-wheel racecar Superformula EAV-25, with a lap time achieved that is within 2% of the best human driver reference. The results demonstrate the capability of the solution in driving at the limit of handling, smoothly executing overtaking maneuvers, and quickly reacting to high oversteering conditions to recover the vehicle stability.

0.31

Model predictive traction control system based on the Koopman operator

eess.SY ·2026-08-26 ·Josip Kir Hromatko, Šandor Ileš
publishedcode/data similarity 0.61
Abstract · 6 pages, 4 figures; associated code available at https://github.com/PVDC-project/pvdc-kmpc-traction-control

Due to their importance, traction control and anti-lock braking systems have become standard equipment in modern vehicles. However, accurate models of tire dynamics are often difficult to obtain and usually include nonlinearities, making their use in control systems challenging. This paper describes a traction control system based on model predictive control and Koopman operator theory, which aims to approximate nonlinear systems with linear ones through a state space transformation. A linear model predictive controller based on the Koopman predictor is compared to a standard nonlinear model predictive controller. Experiments in a high-fidelity vehicle dynamics simulation environment show a comparable reference tracking performance of the two controllers, with a reduced execution time for the proposed Koopman operator-based algorithm, both on a standard PC and embedded hardware.

0.78

Adaptive Model Predictive Control for Ground Vehicles: Review and Demonstrative Implementation

eess.SY ·2026-08-18 ·Chetana Gadgil, Mahendra Singh Tomar
similarity 0.61
Abstract · 16 pages, 4 figures, journal

This paper reviews Adaptive Model Predictive Control (AMPC) methods for Autonomous Vehicles (AVs), focusing on control strategies that dynamically adapt to uncertainties and changing conditions in real-time. The critical role of Adaptive Model Predictive Control (AMPC) in addressing the challenges of autonomous vehicle control are discussed. For the scope of this paper, AMPC is defined as a class of Model Predictive Control (MPC) techniques that modify the system model, cost function, constraints, or prediction horizon, based on real-time data. Traditional MPC, while effective for constrained optimization, struggles with model inaccuracies, computational demands, and dynamic environments, necessitating AMPC methods. The review covers existing literature on Gain scheduled MPC, Online Model Estimation MPC, Weight Adaptive MPC, Horizon Adaptive MPC, Learning Based MPC, and Hybrid MPC that combines MPC with other control methods. In addition to the survey, a demonstrative simulation of an adaptive MPC controller is presented that illustrates practical aspects of weight and speed adaptation in trajectory tracking.

0.29

Physics-Informed Koopman Learning for Data-Efficient System Identification of Automated Vehicle Dynamics

eess.SY ·2026-10-17 ·Hangyu Li, Yiming Meng, Zhaohui Liang, Yunqing Xiao, Yuxuan Chen +5 more
code/data similarity 0.57
Abstract · 13 pages, 9 figures. The CATS-CF dataset and code are available at https://github.com/CATS-Lab/PI-Koopman

Understanding how a particular automated vehicle reacts to nearby traffic can improve motion prediction, control development, traffic simulation, and safety evaluation. However, commercial automated driving systems are proprietary, and single encounters may provide only a few seconds of noisy data. Standard physical models are interpretable but inflexible, whereas neural models are often data-hungry. We propose a physics-informed Koopman framework that combines a calibrated car-following law with a correction learned from the observations. A weak-form estimator learns this correction from velocity measurements integrated over time, avoiding noise-sensitive numerical differentiation. The resulting continuous-time model predicts the follower's response and provides interpretable measures of driving behavior. Experiments on OpenACC and CATS-CF evaluate 5-, 7-, and 11-second histories. Averaged over these histories, the constant-time-headway branch reduces speed prediction error by 16.0% and 15.4% on OpenACC and CATS-CF, respectively, relative to the best neural baselines. The PI-Koopman branches achieve the lowest mean speed and gap errors among the physical and neural comparators. Weak-form estimation reduces acceleration-field reconstruction error by 74.5% in noisy known-law simulations and noise-induced field perturbation by 91.6% in paired real-vehicle measurements. The same PI-Koopman system identification supports following-mode recognition with an approximately eleven-fold difference in median residual variance between human drivers and automated vehicles, and a single residual threshold achieves 85.4% balanced accuracy. The branch informed by the intelligent driver model takes a median 17 to 26 ms for identification and forecasting on the tested central processing units, supporting frequent target adaptation.

0.34

Integrating Flow Matching and Model Predictive Control for Safe Robot Navigation

cs.RO eess.SY ·2026-10-21 ·Philipp Holzmann, Maik Pfefferkorn, Joao Carvalho, Ali Younes, An Thai Le +3 more
similarity 0.57
Abstract

Learning-based path planners based on diffusion and flow matching can generate diverse trajectories from demonstrations but typically lack mechanisms for constraint satisfaction and collision avoidance during deployment. This work proposes a framework that combines flow-matching-based path planning with model predictive path-following control to integrate data-driven path generation with real-time, constraint-aware execution. The flow-matching model captures multimodal path distributions, while the predictive controller adapts motion online to satisfy state and input constraints and avoid obstacles using updated local sensor information. An event-triggered re-planning scheme incorporates predictive control solutions into subsequent path generation, promoting collision-free navigation in environments with previously unseen obstacles. Simulation results for mobile robot navigation demonstrate robust performance across cluttered environments. The framework provides a systematic approach to combining flow matching with predictive control for adaptive, data-driven navigation.

0.10

Data-Driven Predictive Control for Autonomous Vehicle Racing under Varying Friction

eess.SY cs.RO ·2026-11-16 ·Julius Beerwerth, Julius Tischbein, Bassam Alrifaee
code/datahot direction similarity 0.57
Abstract · 8 pages, 4 figures. Submitted to the 2027 European Control Conference (ECC). Code and data: https://github.com/bassamlab/multisurface-racing…

Data-driven predictive control (DPC) predicts future outputs by combining recorded input-output trajectory data such that the combined trajectory approximately matches a measured initial trajectory and tracks a provided reference. This paper investigates to what extent and under which conditions DPC using data pooled across operating conditions retains the prediction accuracy of DPC using data from the current operating condition. In autonomous vehicle racing, the tire-road friction varies between racetrack sections and tire sets. If the initial trajectory and the recorded data originate from different frictions, prediction accuracy of DPC degrades. Ensuring the frictions match requires knowing the friction during recording and estimating the current friction explicitly. Instead, we pool data recorded at different frictions. We compare the prediction accuracy of DPC using data recorded under the current friction (matched), a different friction (mismatched) and data pooled from both frictions. We evaluate in simulation and small-scale vehicle experiments in the Cyber-Physical Mobility Lab (CPM Lab). Our results show that pooled data keep the multi-step root-mean-square prediction error within 1.5 times that of matched data, whereas mismatched data increase it by a factor of 2.2 to 3.4. To assess how this prediction accuracy carries over to control, we evaluate the tracking error from the raceline in closed loop. In simulation, DPC with pooled data tracks comparably to nonlinear model predictive control (13.7 cm versus 13.3 cm) and close to DPC with matched data in the CPM Lab, differing by 0.1 cm on the low-friction tires (1.6 cm versus 1.5 cm) and by 0.2 cm on the high-friction tires (0.9 cm versus 1.1 cm). DPC thus provides partial adaptation to varying friction, without a dedicated adaptation method.

0.59

Physics-Informed Direct Data-Driven Gain-Scheduled Control for Improving the Extrapolation Performance of Vehicle Lateral Control

eess.SY ·2026-11-16 ·Shuichi Yahagi, Aoi Koyanagi, Ansei Yonezawa, Heisei Yonezawa, Hiroki Seto +2 more
similarity 0.56
Abstract

This paper proposes a physics-informed direct data-driven control (PI-D3C) framework for designing a gain-scheduled proportional-integral controller for vehicle yaw-rate tracking. Vehicle lateral dynamics vary depending on vehicle velocity, making it difficult for controllers designed using data collected over a limited operating range to maintain satisfactory control performance outside that range. We introduce a novel PI-D3C framework that integrates pure data-driven virtual reference feedback tuning (VRFT) with prior physical knowledge, thereby significantly improving extrapolation performance beyond the operating range covered by the collected data. In the proposed approach, the gain-scheduled controller parameters are designed based on both training data and the yaw-rate response predicted by the physics-based model. To evaluate the effectiveness of the proposed method, numerical simulations are conducted using co-simulation between MATLAB/Simulink and CarSim. The results demonstrate that the controller designed by pure VRFT achieves satisfactory tracking performance within the training velocity region but exhibits significant deterioration in tracking performance outside the training region. In contrast, the proposed controller maintains good yaw-rate tracking performance over a wider velocity range while suppressing excessive variations in the scheduled gains and steering input. These results indicate that incorporating prior physical knowledge into pure data-driven VRFT improves the extrapolation performance of gain-scheduled controllers designed using limited training data.

0.39