CS Paper Radar

Rethinking Battery-free Sensing Communication via Wake-up Radios

Gaosheng Liu

cs.NI ·submitted 2026-08-26 02:05 UTC · v3

Abstract

Battery-free sensors expose short, stochastic communication windows and may lose timing state whenever their main energy domain browns out. MagPie combines a microampere wake-up radio (WuR) with a separately backed low-power real-time clock (LP-RTC): the WuR widens the first-contact window, while the LP-RTC preserves the acquired phase for later exchanges. Energy gates, epoch-versioned schedules, and idempotent slot allocation extend this mechanism to static, single-hop All-to-One collection without a powered control anchor. The analysis accounts for role selection and duty-cycled listening, and bounds scheduled-retry tails only under explicit conditional quantile coverage. Evaluation separates three scopes. In independent, administratively censored simulation trials, MagPie completes 100/100 first rendezvous events in each of five trace-parameterized harvesting scenarios; Find completes 36-100/100. A single-collision-domain slotted-Aloha study shows that adaptive K is necessary at high contender density and reports mean, P95, and confidence intervals through 120 components. Finally, controlled STM32WL33 experiments validate alignment, clock persistence, and six-device slot execution, including an 11.05-hour functional run. The study does not claim measured end-to-end energy, ambient-harvesting performance, or multi-hop scalability; highly variable harvesting still limits collection because coordination cannot create missing energy.

Comment
This paper is not ready for publication

Closest papers

Nearest neighbours by meaning across the whole index.

Adaptive Wake-on-Radio Communication for Batteryless IoT Systems

cs.NI ·2026-11-16 ·Hooman Sarvghadi, Juan Felipe Gutiérrez Gómez, Negar Halakou, Nasrin Razmi, Andrés Gómez
published similarity 0.53
Abstract · This is an open-access, author-archived version of a manuscript published in ApplePies 2026 Conference

Batteryless Internet of Things (IoT) systems powered by energy harvesting require communication mechanisms that dynamically adapt to fluctuating energy availability while maintaining ultra-low-power operation. This paper presents a Wake-on-Radio (WoR) communication framework for low-power intermittent IoT systems in which the node's communication state adapts to its stored energy. The framework uses a batteryless IoT node that integrates a photovoltaic harvester, a 570 $μ$F capacitor, two voltage supervisors, and a microcontroller. The voltage supervisors drive an energy-aware finite state machine that switches the node between Shutdown, Low-Power Listening (LPL), Transmit, and Receive modes. The proposed system employs the integrated WoR capability of the transceiver, eliminating the need for additional wake-up hardware. For the evaluated traffic conditions and an LPL wake-up rate of 16 Hz, the measured power consumption is approximately 1.2 $μ$W in the Shutdown mode, 300 $μ$W during LPL, 531 $μ$W for reception, and 627 $μ$W for transmission. System-level experiments under solar-harvesting operation validate the proposed framework, demonstrating reliable bidirectional communication with no packet losses observed across repeated runs at a harvested input power of 1.2 mW.

0.25

When Fresh Information Is Not Enough: Age-of-Actuation-Optimal Scheduling for Energy-Harvesting Actuators

cs.IT ·2026-10-15 ·Ali Nikkhah, Anthony Ephremides, Nikolaos Pappas
similarity 0.52
Abstract

We study transmission scheduling in an energy-harvesting actuation system where an actuation requires both a received update and available energy. While age of information (AoI) measures information freshness, age of actuation (AoA) measures the time elapsed since the latest completed actuation. The transmitter observes the receiver's AoA and battery state and decides whether to transmit a fresh update in each slot. We formulate average-AoA minimization as a Markov decision process and establish an AoA-threshold property for an optimal policy. We also derive the average AoA in closed form under the AoI-optimal policy, which is always-transmit. Numerical results show that AoA-aware scheduling can improve actuation freshness while reducing the number of transmissions, although information freshness may deteriorate. The two policies coincide for some pairs of channel success and energy-arrival probabilities. For a one-unit battery, the transmission rate under the AoA-optimal policy can vary nonmonotonically with the energy-arrival probability.

0.20

Age-Optimal Target Wake Time: Provably Good Wake Schedules for Energy-Constrained Wi-Fi Status Updating

cs.NI cs.IT ·2026-08-21 ·Haoyu Wang, Bo Sheng, Xiaoqian Zhang
publishedtheorycode/data similarity 0.52
Abstract · 11 pages, IEEE conference format; extended version (full proofs in the appendix) of a paper accepted at MSWiM 2026, Paris. This version adds…

Target Wake Time (TWT), introduced in IEEE 802.11ax, lets an access point schedule exactly when each station wakes, transmits, and dozes. Existing TWT schedulers optimize energy or throughput, treating information freshness at best as a constraint and offering no performance guarantees. We design the wake schedule itself for freshness: minimize the weighted average Age of Information (AoI) over stations subject to per-station energy budgets, where the decision variables are the TWT triples (wake interval, offset, service period duration). We derive a renewal-exact AoI model for TWT under per-SP block fading and validate it against packet-level 802.11ax simulation with ~1% mean error. We show that, unlike preemptive scheduling, non-preemptive TWT packing can be infeasible at schedule density 1, and identify the granularity condition under which a small-first best-fit packer provably succeeds. Around this we build Harmonic-Greedy, a scheduler combining a convex relaxation, anchor-optimized power-of-two rounding, and a best-of-uniform safeguard, and prove it is a constant-factor approximation: 4/ln 2 ~= 5.77 under a mild granularity assumption and 6/ln 2 ~= 8.66 unconditionally. We implement the complete system in ns-3 -- a TWT wake/doze mechanism integrated with the power-save architecture, plus the scheduler -- and show that it is the only scheduler that stays near a relaxation lower bound across all regimes: against a strong energy-greedy baseline it ties when per-station energy floors already pin the periods, and wins by 4-36% exactly where the schedule density is binding and must be redistributed by AoI weight or channel quality rather than by energy budget -- the regime our analysis identifies.

0.56

A LoRa-Compatible Receiver with Programmable Noise-Power Trade-Off and Integrated Wake-Up Mode

cs.AR ·2026-10-14 ·Marco Gonzalez, Pol Maistriaux, Jérôme Louveaux, David Bol
similarity 0.52
Abstract · 13 pages, 19 figures, removed mentions to IEEE

Programmable receivers allow an optimal performance in the variable conditions of the wireless channel. An extensive analysis of their noise-power trade-off enables the development of a main receiver with embedded wake-up circuitry. This makes the seamless integration of wake-up receivers (WuRXs) in RF receivers possible, avoiding power, area, complexity, and cost overheads in the system. In this paper, we propose the first LoRa-compatible receiver with an integrated wake-up mode and a programmable noise-power trade-off. In main-receiver mode, it consumes 4.57 mW for a sensitivity of -138 dBm, but it can save up to 62.6% of power consumption at the cost of an 8.3-dB sensitivity degradation. In wake-up mode, sensitivity down to -126 dBm is achieved for a 32-ms latency and 1.5 mW of power consumption. The power consumption remains relatively high due to a sub-optimal design of the the phase-locked loop (PLL). In the end, the wake-up mode consumes 3X less than the lowest-noise configuration in main-receiver mode.

0.28

HQARRF: Hierarchical Q-learning and Force-aware Routing for Multi-Charger Scheduling in Wireless Rechargeable Sensor Networks

cs.NI cs.LG ·2026-09-12 ·Liang-Ching Tao, Pi-Chung Wang
similarity 0.51
Abstract · 15 pages, 5 figures, 1 table. Under review at MAMM 2026. Also archived at https://doi.org/10.5281/zenodo.22703448

Multi-charger scheduling in wireless rechargeable sensor networks must weigh sensor death risk, charger energy, travel cost, return-to-base feasibility and inter-charger coordination at once, and schedulers driven by local urgency alone duplicate service and leave whole regions unattended. We present HQARRF, a two-level scheduler. Below, an interpretable ARR-F score ranks candidate clusters through an attraction term for local urgency, a repulsion term against charger crowding and a force bonus from nearby critical sensors. Above, adaptive zones compress regional state into a deadline-based risk estimate, and a gated Q-learning controller decides only whether to redirect service to a high-risk, under-served zone. Over 27 parameter points HQARRF attains the highest mean survival rate at 26, improving survival by 20.7 percentage points over the mean of five baselines and 9.2 over the strongest baseline at each point. An ablation isolates the upper level: its gain tracks how often the controller fires.

0.65

Controller-Only False Confirmation in Passive RF UAV Link Detection

cs.CR ·2026-09-21 ·Rajendra Upadhyay, Rajendra Paudyal, Al Nahian Bin Emran, Duminda Wijesekera
similarity 0.50
Abstract

Passive radio frequency (RF) sensing is widely used for counter-unmanned-aerial-vehicle (counter-UAV) detection. Existing studies commonly report high accuracy against background RF or WiFi/Bluetooth interference, but rarely isolate controller-only operation without a linked aircraft. We present a dual-band software-defined radio (SDR) measurement study with ambient, controller-only, and linked states for three commercial UAV platforms (DJI Phantom 3 4K, Hubsan H501S, DJI Mavic Mini). Two USRP B210 receivers simultaneously scan eight 2.4 GHz and twelve 5.8 GHz observation windows across twenty rounds. We first train an energy-based detector using linked and ambient scans only. At four ranked concurrent dwell steps (8 s), it achieves 0.992 linked-versus-ambient balanced accuracy but false-confirms 30 out of 60 controller-only scans (FCRctrl = 0.500). We then include controller-only scans in training and use confirm, reject, and defer outputs under an explicit controller-only false-confirmation-rate (FCR) constraint. For the pooled all-platform analysis, the constraint reduces observed FCRctrl from 0.350 to 0.050, while confirm-linked TPR decreases from 0.900 to 0.400 and 42.1% of scans are deferred. The corresponding compact scan performs substantially better for Hubsan and Mavic than for Phantom. A hardware-in-loop experiment reduces measured wall-clock time from 82.9 s to 28.9 s. These measurements show that linked-versus-background accuracy does not measure controller-only false confirmation and that this error should be reported separately.

0.24

Goal-Oriented Communication and Control Co-Design via Semantic Push-Pull in Industrial IoT

cs.IT ·2026-09-18 ·Muhammad Azeem Khan, Yuriy Zacchia Lun, Aamir Mahmood, Piergiuseppe Di Marco, Mikael Gidlund +1 more
published similarity 0.50
Abstract · 6 pages, 3 figures, accepted in IEEE Globecom 2026

Emerging 6G industrial IoT architectures require wireless networked control systems capable of stabilizing diverse control loops over tightly constrained radio resources. Conventional periodic and Age-of-Information (AoI) based scheduling guarantees bounded staleness at the cost of persistent channel saturation. Conversely, pure event-triggered (PureET) strategies minimize transmissions but risk catastrophic silent deterioration when local sensor-side thresholds fail to reflect critical state evolution. To bridge this gap, we propose a communication-control co-design framework governed by a 6G Semantic Layer that independently arbitrates uplink and downlink resources. Instead of relying on freshness, our architecture evaluates the actual control impact of a packet using the state-to-error ratio (SER). We unify this control confidence with channel reliability in terms of signal-to-noise ratio (SNR) to orchestrate a threshold-based sensor push and a state-aware controller pull mechanism. To ensure equitable resource allocation across dynamically heterogeneous plants, the proposed framework explicitly scales actuation deadbands according to local plant dynamics. Simulations over Rayleigh-faded channels demonstrate that this approach fundamentally shifts the Pareto frontier between transmission rate and control quality. The proposed scheme achieves tracking accuracy comparable to periodic schedulers at a reduced communication overhead, while mitigating the estimation errors characteristic of PureET.

0.57

A Smallest-Need-First Job Scheduling Framework with Adaptive Optimization of Idle Node Counts for Energy-Efficient HPC Systems

cs.DC ·2026-08-30 ·Reza Pulungan, Raka Satya Prasasta, Santana Yuda Pradata, Mursalim, Hiroyuki Takizawa +1 more
similarity 0.50
Abstract · 18 pages, 10 figures

Power-state management in high-performance computing (HPC) clusters must reduce idle energy without excessive wake-up delays for rigid parallel jobs. This paper presents SNF-ICON, an event-driven controller combining smallest-need-first (SNF) gang scheduling, predictive wake timing, and adaptive warm-spare control. At each scheduler invocation, recent interarrival and completed-service samples are screened for sufficiency, exponential-like variability, low lag-one autocorrelation, and acceptable Kolmogorov-Smirnov distance. Rejected or data-sparse windows use SNF+IPM (Intelligent Power Manager), whereas accepted windows activate release prediction and an exponential next-event model. Warm-spare optimization is applied only when queue, event, and arrival-recency conditions permit, balancing estimated waiting and non-compute energy over a timeout-capped horizon. We evaluate four DAS2 trace segments and a generated Markovian workload on AOBA-derived 64-node models, plus SDSC Blue on an AOBA-derived 1152-node model. SNF-ICON is compared with SNF+IPM and First Come First Served (FCFS) + backfilling with IPM. It reduces average waiting time relative to the FCFS-based baseline in all six cases and remains close to at least one heuristic energy baseline in five. The generated workload spends substantial time in ICON mode, whereas DAS2 workloads operate mainly in fallback. Furthermore, cross-platform results show strong dependence on node-transition and power models. Thus, no single policy or parameter set works best in every case.

0.27