CS Paper Radar

Adaptive Wake-on-Radio Communication for Batteryless IoT Systems

Hooman Sarvghadi, Juan Felipe Gutiérrez Gómez, Negar Halakou, Nasrin Razmi, Andrés Gómez

cs.NI ·submitted 2026-11-16 15:26 UTC · v1
published

Abstract

Batteryless Internet of Things (IoT) systems powered by energy harvesting require communication mechanisms that dynamically adapt to fluctuating energy availability while maintaining ultra-low-power operation. This paper presents a Wake-on-Radio (WoR) communication framework for low-power intermittent IoT systems in which the node's communication state adapts to its stored energy. The framework uses a batteryless IoT node that integrates a photovoltaic harvester, a 570 $μ$F capacitor, two voltage supervisors, and a microcontroller. The voltage supervisors drive an energy-aware finite state machine that switches the node between Shutdown, Low-Power Listening (LPL), Transmit, and Receive modes. The proposed system employs the integrated WoR capability of the transceiver, eliminating the need for additional wake-up hardware. For the evaluated traffic conditions and an LPL wake-up rate of 16 Hz, the measured power consumption is approximately 1.2 $μ$W in the Shutdown mode, 300 $μ$W during LPL, 531 $μ$W for reception, and 627 $μ$W for transmission. System-level experiments under solar-harvesting operation validate the proposed framework, demonstrating reliable bidirectional communication with no packet losses observed across repeated runs at a harvested input power of 1.2 mW.

Comment
This is an open-access, author-archived version of a manuscript published in ApplePies 2026 Conference

Closest papers

Nearest neighbours by meaning across the whole index.

Energy-Aware Receiver-initiated MAC Protocol for Energy Harvesting IoT

cs.NI cs.ETcs.PF ·2026-10-08 ·Sohail Sarang, Praveen Kumar Donta, Dejan Vukobratović
unusual similarity 0.66
Abstract · Submitted to 34th Telecommunications Forum (TELFOR 2026)

Energy harvesting (EH) technology has emerged as a key approach for extending the operational autonomy of Internet of Things (IoT) devices. In this context, medium access control (MAC) protocols for EH-IoT make use of the harvested energy efficiently to enhance the application performance. However, many existing MAC protocols rely on stored energy the battery in devising energy-aware strategies, which can interrupt the device operation and hinder the execution of ongoing tasks in dynamic and low EH conditions. To address this, this paper presents an energy-aware receiver-initiated MAC protocol for EH-IoT devices, called EARI-MAC, that adjusts the duty cycle of the receiver device based on stored energy and current harvesting power using the mathematical formulation. This approach supports sustained receiver operation under low EH conditions and improved application performance when harvested energy is abundant. The performance of the EARI-MAC has been evaluated in simulation using the real solar data gathered in Novi Sad, for three consecutive days. The simulation results demonstrate that the EARI-MAC utilizes the available energy resources efficiently and improves the packet delivery ratio and network throughput by more than 10%, reduces the receiver energy consumption by 5.6% and 8.2% and energy consumption per bit by 9.6% and 13.9% compared with QPPD-MAC and energy-unaware MAC, respectively.

0.27

A LoRa-Compatible Receiver with Programmable Noise-Power Trade-Off and Integrated Wake-Up Mode

cs.AR ·2026-10-14 ·Marco Gonzalez, Pol Maistriaux, Jérôme Louveaux, David Bol
similarity 0.60
Abstract · 13 pages, 19 figures, removed mentions to IEEE

Programmable receivers allow an optimal performance in the variable conditions of the wireless channel. An extensive analysis of their noise-power trade-off enables the development of a main receiver with embedded wake-up circuitry. This makes the seamless integration of wake-up receivers (WuRXs) in RF receivers possible, avoiding power, area, complexity, and cost overheads in the system. In this paper, we propose the first LoRa-compatible receiver with an integrated wake-up mode and a programmable noise-power trade-off. In main-receiver mode, it consumes 4.57 mW for a sensitivity of -138 dBm, but it can save up to 62.6% of power consumption at the cost of an 8.3-dB sensitivity degradation. In wake-up mode, sensitivity down to -126 dBm is achieved for a 32-ms latency and 1.5 mW of power consumption. The power consumption remains relatively high due to a sub-optimal design of the the phase-locked loop (PLL). In the end, the wake-up mode consumes 3X less than the lowest-noise configuration in main-receiver mode.

0.28

Mobile Backscatter Communication for the Battery-less Internet of Things

cs.NI ·2026-09-01 ·Weining Song, Thiemo Voigt, Stefanos Kaxiras, Yuan Yao, Luca Mottola
published similarity 0.54
Abstract · 11 pages, 20 figures. Extended version of the paper accepted at MSWiM 2026

We enable backscatter communication in the battery-less mobile Internet of Things (IoT). Backscatter communication is extensively studied in static settings. Existing designs are, however, fundamentally mismatched with mobility and time-varying energy patterns. Channel conditions rapidly fluctuate, impacting the achievable data rates and thus transmission costs. Energy availability varies unpredictably, possibly forcing devices to remain quiescent to recharge energy buffers. The two issues compound each other: while recharging, a battery-less mobile IoT device may miss more favorable channel conditions. We design a lightweight decision system that dynamically determines when to transmit by checking short-term trends in signal strength, while using Non-volatile Memory (NVM) to retain packets in unfavorable channel conditions and across energy failures. Using a prototype we built and real-world mobility and power traces, we compare our design against a rate-adaptive baseline that only considers the instantaneous channel conditions. Experimental results show that our system improves throughput by up to 5.16x while reducing transmission energy consumption by up to 47.3%, with only 0.23% - 7.3% additional energy overhead.

0.40

Rethinking Battery-free Sensing Communication via Wake-up Radios

cs.NI ·2026-08-26 ·Gaosheng Liu
similarity 0.53
Abstract · This paper is not ready for publication

Battery-free sensors expose short, stochastic communication windows and may lose timing state whenever their main energy domain browns out. MagPie combines a microampere wake-up radio (WuR) with a separately backed low-power real-time clock (LP-RTC): the WuR widens the first-contact window, while the LP-RTC preserves the acquired phase for later exchanges. Energy gates, epoch-versioned schedules, and idempotent slot allocation extend this mechanism to static, single-hop All-to-One collection without a powered control anchor. The analysis accounts for role selection and duty-cycled listening, and bounds scheduled-retry tails only under explicit conditional quantile coverage. Evaluation separates three scopes. In independent, administratively censored simulation trials, MagPie completes 100/100 first rendezvous events in each of five trace-parameterized harvesting scenarios; Find completes 36-100/100. A single-collision-domain slotted-Aloha study shows that adaptive K is necessary at high contender density and reports mean, P95, and confidence intervals through 120 components. Finally, controlled STM32WL33 experiments validate alignment, clock persistence, and six-device slot execution, including an 11.05-hour functional run. The study does not claim measured end-to-end energy, ambient-harvesting performance, or multi-hop scalability; highly variable harvesting still limits collection because coordination cannot create missing energy.

0.27

From WPT to Encrypted Telemetry: A Battery-Free Backscattering-based Polarimetric Wireless Sensor

cs.NI ·2026-09-24 ·Taki Eddine Djidjekh, Loïc Thomas, Quentin Bernyer, Gaël Loubet, Daniela Dragomirescu +1 more
published similarity 0.50
Abstract

This work introduces an indoor Battery-Free Wireless Sensing Node powered through radiative Wireless Power Transfer (WPT). The proposed platform targets secure, energyefficient active sensing and overcomes key limitations of many prior battery-free approaches, which commonly provide neither on-node computation nor cryptographic protection. The node combines temperature, humidity, pressure and Volatile Organic Compound (VOC) measurements with a low-power microcontroller that executes sensor calibration, derives a VOC index, formats the payload, and applies AES-128 encryption before wireless transmission. Energy harvesting and communication are enabled by a 1-bit controlled Backscatter Rectenna (BR), which both scavenges incident RF power and produces an orthogonally polarized backscattered signal for robust polarimetric operation. Experimental results validate reliable multi-sensor readout and encrypted data transfer, while maintaining a very low energy budget for the complete sense-compute-encrypt-transmit cycle.

0.29

Energy Measurement and Optimization of TinyML in Resource-Constrained Embedded Systems: A Systematic Mapping Study

cs.LG cs.ARcs.ET ·2026-11-05 ·Clariele Almeida, Renan Beserra, Rafael Moura, Danilo Araújo, Bruno Nogueira +2 more
survey similarity 0.49
Abstract · 40 pages, 10 figures, 8 tables

The rapid expansion of the Internet of Things (IoT) has increased the volume of data generated at the network edge, where many devices operate under severe memory, processing, and energy constraints. In this context, Tiny Machine Learning (TinyML) enables machine learning (ML) tasks to be executed on microcontrollers, smart sensors, and other resource-constrained platforms. However, the literature remains heterogeneous regarding the algorithms evaluated, energy-measurement methods, reported metrics, influencing factors, and optimization strategies. This study presents a systematic mapping of energy-aware TinyML research. It identifies the main models and learning approaches, classifies energy-evaluation methodologies and metrics, examines the technical factors affecting energy consumption, and organizes the reported optimization techniques into a structured taxonomy. The findings highlight the frequent use of convolutional and lightweight architectures, direct measurements and analytical estimations, and factors related to model architecture, hardware, communication, numerical precision, and input characteristics. The optimization strategies were grouped into model compression, hardware-aware design, system and communication optimization, and data and processing optimization. The results also reveal limited standardization in experimental platforms, measurement procedures, and reporting practices, limiting reproducibility and direct comparison across studies. This mapping provides an updated overview of the field and guidance for developing and evaluating more energy-efficient TinyML solutions.

0.25

A Modular IoT-Enabled Remote Laboratory Platform for Hybrid Energy System Research and Engineering Education

eess.SY ·2026-09-01 ·Lamine Chalal, Louis Olivier, Pierre Liennard, Allal Saadane, Ahmed Rachid
similarity 0.49
Abstract

Remote laboratory systems improve accessibility in engineering education and research by enabling Internet-based interaction with physical equipment. This paper presents a modular IoT-enabled remote laboratory platform for hybrid energy system studies, combining renewable energy emulators, battery storage, and programmable loads within a three-interface architecture based on a web HMI, TIA Portal, and MATLAB/Simulink, all connected through a Talk2M VPN cloud. An industrial PLC and IoT gateway provide deterministic local control as well as secure remote access and monitoring. A hierarchical energy-management algorithm is validated by comparing local and remote executions under identical wind and irradiance profiles. The results show small differences in the energy balances of the renewable sources, battery, and load, while typical communication delays are on the order of 100 ms. Consequently, the platform supports research-grade remote experimentation and project-based learning in control and energy systems engineering.

0.25

Age-Optimal Target Wake Time: Provably Good Wake Schedules for Energy-Constrained Wi-Fi Status Updating

cs.NI cs.IT ·2026-08-21 ·Haoyu Wang, Bo Sheng, Xiaoqian Zhang
publishedtheorycode/data similarity 0.49
Abstract · 11 pages, IEEE conference format; extended version (full proofs in the appendix) of a paper accepted at MSWiM 2026, Paris. This version adds…

Target Wake Time (TWT), introduced in IEEE 802.11ax, lets an access point schedule exactly when each station wakes, transmits, and dozes. Existing TWT schedulers optimize energy or throughput, treating information freshness at best as a constraint and offering no performance guarantees. We design the wake schedule itself for freshness: minimize the weighted average Age of Information (AoI) over stations subject to per-station energy budgets, where the decision variables are the TWT triples (wake interval, offset, service period duration). We derive a renewal-exact AoI model for TWT under per-SP block fading and validate it against packet-level 802.11ax simulation with ~1% mean error. We show that, unlike preemptive scheduling, non-preemptive TWT packing can be infeasible at schedule density 1, and identify the granularity condition under which a small-first best-fit packer provably succeeds. Around this we build Harmonic-Greedy, a scheduler combining a convex relaxation, anchor-optimized power-of-two rounding, and a best-of-uniform safeguard, and prove it is a constant-factor approximation: 4/ln 2 ~= 5.77 under a mild granularity assumption and 6/ln 2 ~= 8.66 unconditionally. We implement the complete system in ns-3 -- a TWT wake/doze mechanism integrated with the power-save architecture, plus the scheduler -- and show that it is the only scheduler that stays near a relaxation lower bound across all regimes: against a strong energy-greedy baseline it ties when per-station energy floors already pin the periods, and wins by 4-36% exactly where the schedule density is binding and must be redistributed by AoI weight or channel quality rather than by energy budget -- the regime our analysis identifies.

0.56