CS Paper Radar

A Modular IoT-Enabled Remote Laboratory Platform for Hybrid Energy System Research and Engineering Education

Lamine Chalal, Louis Olivier, Pierre Liennard, Allal Saadane, Ahmed Rachid

eess.SY ·submitted 2026-09-01 07:15 UTC · v1

Abstract

Remote laboratory systems improve accessibility in engineering education and research by enabling Internet-based interaction with physical equipment. This paper presents a modular IoT-enabled remote laboratory platform for hybrid energy system studies, combining renewable energy emulators, battery storage, and programmable loads within a three-interface architecture based on a web HMI, TIA Portal, and MATLAB/Simulink, all connected through a Talk2M VPN cloud. An industrial PLC and IoT gateway provide deterministic local control as well as secure remote access and monitoring. A hierarchical energy-management algorithm is validated by comparing local and remote executions under identical wind and irradiance profiles. The results show small differences in the energy balances of the renewable sources, battery, and load, while typical communication delays are on the order of 100 ms. Consequently, the platform supports research-grade remote experimentation and project-based learning in control and energy systems engineering.

Closest papers

Nearest neighbours by meaning across the whole index.

Energy-Aware Receiver-initiated MAC Protocol for Energy Harvesting IoT

cs.NI cs.ETcs.PF ·2026-10-08 ·Sohail Sarang, Praveen Kumar Donta, Dejan Vukobratović
unusual similarity 0.53
Abstract · Submitted to 34th Telecommunications Forum (TELFOR 2026)

Energy harvesting (EH) technology has emerged as a key approach for extending the operational autonomy of Internet of Things (IoT) devices. In this context, medium access control (MAC) protocols for EH-IoT make use of the harvested energy efficiently to enhance the application performance. However, many existing MAC protocols rely on stored energy the battery in devising energy-aware strategies, which can interrupt the device operation and hinder the execution of ongoing tasks in dynamic and low EH conditions. To address this, this paper presents an energy-aware receiver-initiated MAC protocol for EH-IoT devices, called EARI-MAC, that adjusts the duty cycle of the receiver device based on stored energy and current harvesting power using the mathematical formulation. This approach supports sustained receiver operation under low EH conditions and improved application performance when harvested energy is abundant. The performance of the EARI-MAC has been evaluated in simulation using the real solar data gathered in Novi Sad, for three consecutive days. The simulation results demonstrate that the EARI-MAC utilizes the available energy resources efficiently and improves the packet delivery ratio and network throughput by more than 10%, reduces the receiver energy consumption by 5.6% and 8.2% and energy consumption per bit by 9.6% and 13.9% compared with QPPD-MAC and energy-unaware MAC, respectively.

0.27

Cognitive Energy Management: Concept,Framework, and Demonstration in Smart Port Energy Systems

eess.SY ·2026-08-25 ·Hafiz Majid Hussain, Wajiha Samer, Juhaa Haakana
similarity 0.50
Abstract

Modern energy management systems, even within advanced energy internet (EI) infrastructures, remain fundamentally reactive, optimization-bound, and incapable of reasoning about context, intent, or uncertainty. While the EI paradigm has established a powerful cyber-physical architecture for interconnecting distributed energy resources via software-defined packetized networks, the question of how such systems should think, adapt, and govern energy decisions intelligently remains an open challenge. This paper introduces cognitive energy management (CEM); a new conceptual framework that addresses this gap by redefining how energy systems perceive, reason, learn, and act within complex operational environments. Grounded in the EI cyber-physical foundation, CEM extends beyond conventional optimization by embedding goal-directed reasoning and continuous adaptation into the energy management loop, positioning itself as the cognitive governance layer of EI-based infrastructures. We formally define CEM, distinguish it from rule-based and optimization-based paradigms through structured comparison, and articulate its core architectural layers. To demonstrate the framework's practical value, we develop a toy problem grounded in smart port energy management; one of the most operationally demanding EI node environments in modern infrastructure. Specifically, we model a predictive vessel turnaround scenario in which a CEM-enabled system plans energy procurement, storage pre-charging, and load scheduling across a six-hour operational horizon. The demonstration illustrates how CEM moves the EI beyond feasibility-seeking toward intelligent, anticipatory energy governance.

0.22

Adaptive Wake-on-Radio Communication for Batteryless IoT Systems

cs.NI ·2026-11-16 ·Hooman Sarvghadi, Juan Felipe Gutiérrez Gómez, Negar Halakou, Nasrin Razmi, Andrés Gómez
published similarity 0.49
Abstract · This is an open-access, author-archived version of a manuscript published in ApplePies 2026 Conference

Batteryless Internet of Things (IoT) systems powered by energy harvesting require communication mechanisms that dynamically adapt to fluctuating energy availability while maintaining ultra-low-power operation. This paper presents a Wake-on-Radio (WoR) communication framework for low-power intermittent IoT systems in which the node's communication state adapts to its stored energy. The framework uses a batteryless IoT node that integrates a photovoltaic harvester, a 570 $μ$F capacitor, two voltage supervisors, and a microcontroller. The voltage supervisors drive an energy-aware finite state machine that switches the node between Shutdown, Low-Power Listening (LPL), Transmit, and Receive modes. The proposed system employs the integrated WoR capability of the transceiver, eliminating the need for additional wake-up hardware. For the evaluated traffic conditions and an LPL wake-up rate of 16 Hz, the measured power consumption is approximately 1.2 $μ$W in the Shutdown mode, 300 $μ$W during LPL, 531 $μ$W for reception, and 627 $μ$W for transmission. System-level experiments under solar-harvesting operation validate the proposed framework, demonstrating reliable bidirectional communication with no packet losses observed across repeated runs at a harvested input power of 1.2 mW.

0.25

LoRIS: LoRaWAN-based IoT Platform for Sustainability Monitoring in Hotels

cs.NI ·2026-08-18 ·Yash Pandey, Angus Gray, Reza Serati, Oscar Zhu, Emil Juvan +7 more
unusual similarity 0.48
Abstract

The hospitality sector is a major source of global greenhouse gas emissions, water stress, and waste generation, yet sustainability reporting in hotels remains constrained by coarse, manually collected operational data. We present LoRIS (LoRaWAN-based IoT platform for sustainability monitoring in hotels), a LoRaWAN-based sensing system that delivers high-resolution measurements of resource consumption, environmental conditions, and guest behaviour across geographically distributed hotel properties. The architecture follows the canonical LoRaWAN reference model and is built for the operational realities of hospitality deployments: restrictive hotel IT policies, guest privacy expectations, rapid and reversible installation, and multi-year battery operation. Privacy-by-design guides modality selection and deployment zoning, and end-to-end encryption protects data from sensor to dashboard. This system has been running since February 2022 and currently spans 850 sensors of 19 types across 21 sites in Australia and Slovenia, covering both the AU915 and EU868 regulatory regions. The platform has generated over 202 million sensor records and ingests approximately 245,000 uplink messages per day on managed serverless infrastructure. Our system has been successfully used for seven field studies spanning food waste, energy consumption, and water consumption, including controlled intervention experiments that measure environmental outcomes and guest satisfaction in parallel. This system shows that LoRaWAN sensing can be deployed at scale in operational hotels without compromising guest experience or privacy.

0.29

Cnuas: A Software-Defined AI/HPC Rack-scale Emulation Platform and Hyperscale Data Center Facility Twin

cs.DC cs.ARcs.NI ·2026-09-14 ·Weqaar Janjua, Eoin OConnell, Mihai Penica
code/data similarity 0.48
Abstract · 13 pages, 5 figures, 4 tables

Modern AI and HPC systems integrate accelerators, high-speed networks, and management controllers at rack scale. Developing software for this infrastructure typically requires access to scarce, costly hardware, while software abstractions can obscure how workloads depend on resources across servers and accelerators. This paper presents Cnuas, an open-source, experimental rack-scale emulation platform whose baseline architecture follows the Open Compute Project (OCP) Open Rack v3 specifications. Through functional emulation, it supports experimentation, learning and software development within academic and industrial research and development, rather than matching the throughput or latency of physical hardware. Its web-based user interface visualizes racks, devices and their interconnections to help developers build a system-level mental model of the infrastructure supporting their workloads. At its core, CnuasNIC and CnuasSwitch implement a guest-visible remote direct memory access (RDMA) adapter and a host-resident hybrid software switch supporting both RoCEv2 and native InfiniBand. The platform also provides a dedicated AI/ML accelerator (GPU) peer fabric and OpenBMC-based rack management with executable power supply and battery backup firmware over RS-485. These components support the study of device, driver, and firmware interfaces on commodity hosts. The accelerator software stack remains an early research prototype, and facility modeling with OpenUSD is an exploratory extension. The paper presents the architecture, interfaces, and bounded prototype results as a basis for community collaboration across the core platform and its extensions.

0.35

Large Language Model Assisted Operational Monitoring for Battery Energy Storage System Integrated Power Distribution Networks

cs.AI cs.CLeess.SY ·2026-08-15 ·Azmeer Akhtar, Md Fazley Rafy, Anurag K. Srivastava
similarity 0.47
Abstract

Battery energy storage systems (BESS) are increasingly used in distribution networks for voltage regulation and demand response, which increases the volume and complexity of operational telemetry available to grid operators. This paper presents an AI-enabled monitoring framework that connects a large language model (LLM) interface with a structured telemetry database for BESS-integrated distribution system analysis. Operator questions are submitted in natural language and translated into validated SQL queries using predefined database schema information and approved KPI views. Retrieved measurements, including bus voltages, state of charge, active power, and reactive power, are evaluated against engineering constraints for voltage limits, BESS operation, and demand response tracking. The framework is validated using hardware-in-the-loop co-simulation data from a BESS-equipped distribution feeder operating under reactive power-based voltage control and price-driven demand response. Case studies show that the framework generates valid database queries, identifies repeated voltage violations, detects reactive power overshoot, and evaluates active-power tracking performance. The results show that LLM-assisted monitoring can connect structured grid telemetry with automated engineering assessment for BESS operation analysis.

0.04

Quantifying EnergyNet performance: a simulation-based framework for decentralized energy networks

eess.SY ·2026-09-29 ·Max Collins, Jonas Birgersson, Marc A. Weiss, Jimmy Chen, Mark Z. Jacobson +8 more
similarity 0.47
Abstract

Power transmission and distribution infrastructure connects generation with consumers. Extreme weather, infrastructure failures, and geopolitical conflicts increasingly disrupt these connections, leaving large groups without electricity until service is restored. Local generation, storage, and controllable loads pose challenges but also enable new ways to organize energy systems. EnergyNet is a decentralized architecture of interconnected power electronic Energy Routers. Each coordinates local loads, generation, storage, and grid connections. Bidirectional Energy Links enable exchange between routers, while the Energy Protocol communicates needs and availability to coordinate transfers. EnergyNet can operate with or without the public grid. This paper develops a quantitative framework for modeling and evaluating EnergyNet. It represents topology, prioritized loads, generation, storage, grid connections, links, and component limits. Receding-horizon optimization calculates energy allocation and exchange, supporting also disturbance and reliability analysis. A three-router case illustrates energy sharing and islanded operation. The framework then models a Stanford University campus microgrid and an off-grid microgrid in Half Moon Bay. Under low-solar conditions, electric bus visits support the off-grid microgrid while preserving transport service. Finally, the paper models an EnergyNet under construction in Lund, Sweden, comprising ten buildings and 278 apartments. Full service is maintained in summer and winter and after the loss of one grid interface or Energy Link. Losing two links partitions the network; service in the island depends on local resources and repair time. Reliability screening identifies partitioning as rare but credible. Monte Carlo analysis shows full critical service in sampled summer conditions and median continuous critical service of approximately 92% in winter.

0.40

Agentic AI-Enabled Solar-Powered High-Altitude Platforms for Sustainable SAGINs

cs.NI ·2026-08-15 ·Haoxiang Luo, Bang Huang, Mohamed-Slim Alouini
similarity 0.46
Abstract

Space-Air-Ground Integrated Networks (SAGINs) can extend connectivity, but their communication, computing, and platform operations create tightly coupled energy demands. Solar-powered High-Altitude Platforms (HAPs) offer a promising middle layer by combining persistent regional coverage, renewable-energy harvesting, and onboard computing. However, realizing this potential requires more than optimizing individual links or processors, as radio transmission, task execution, backhaul use, and battery preservation share a common energy budget. Therefore, we introduce a HAP-native Agentic AI framework. It continuously perceives communication, computing, energy, mobility, and mission states; invokes quantitative tools for prediction and verification; and coordinates executable actions through a closed control loop. Then, a multi-timescale design separates fast radio control from task orchestration and long-term energy planning. Furthermore, a disaster-recovery case study illustrates how the framework responds to backhaul congestion, traffic surges, and declining solar generation, improving energy efficiency, task completion, and latency over other baselines. We finally identify trustworthy control, collaborative multi-HAP orchestration, and digital-twin-assisted lifelong adaptation as key steps toward deployable, sustainable, and resilient SAGIN intelligence.

0.40