CS Paper Radar

LoRIS: LoRaWAN-based IoT Platform for Sustainability Monitoring in Hotels

Yash Pandey, Angus Gray, Reza Serati, Oscar Zhu, Emil Juvan, Anna Zinn, Danyelle Greene, Qingqing Chen, Sarah MacInnes, Siamak Layeghy, Sara Dolnicar, Marius Portmann

cs.NI ·submitted 2026-08-18 07:49 UTC · v1
unusual

Abstract

The hospitality sector is a major source of global greenhouse gas emissions, water stress, and waste generation, yet sustainability reporting in hotels remains constrained by coarse, manually collected operational data. We present LoRIS (LoRaWAN-based IoT platform for sustainability monitoring in hotels), a LoRaWAN-based sensing system that delivers high-resolution measurements of resource consumption, environmental conditions, and guest behaviour across geographically distributed hotel properties. The architecture follows the canonical LoRaWAN reference model and is built for the operational realities of hospitality deployments: restrictive hotel IT policies, guest privacy expectations, rapid and reversible installation, and multi-year battery operation. Privacy-by-design guides modality selection and deployment zoning, and end-to-end encryption protects data from sensor to dashboard. This system has been running since February 2022 and currently spans 850 sensors of 19 types across 21 sites in Australia and Slovenia, covering both the AU915 and EU868 regulatory regions. The platform has generated over 202 million sensor records and ingests approximately 245,000 uplink messages per day on managed serverless infrastructure. Our system has been successfully used for seven field studies spanning food waste, energy consumption, and water consumption, including controlled intervention experiments that measure environmental outcomes and guest satisfaction in parallel. This system shows that LoRaWAN sensing can be deployed at scale in operational hotels without compromising guest experience or privacy.

Closest papers

Nearest neighbours by meaning across the whole index.

Data Quality Audit and Bivariate Temperature-Humidity Analysis of a Long-Term LoRaWAN Network: Anomaly Detection, PCA, Clustering and Machine Learning

cs.LG cs.DCphysics.ao-phstat.ML ·2026-10-23 ·Mamadou Sow
similarity 0.61
Abstract

Long-term environmental IoT/LPWAN deployments often aggregate heterogeneous data streams from diverse devices without systematic auditing of each variable's actual coverage prior to analysis-an increased risk when multiple sensor types coexist within the same network. This work proposes a C++17 processing pipeline applied to the Tour Perret LoRaWAN dataset (421 937 frames, June 2021--June 2023, 5 devices). A systematic coverage audit integrated into the extraction phase reveals that CO2 is completely missing (0% coverage) and pressure is reported only by an isolated base module (Wyres, 4.24% of the corpus), invalidating the initial hypothesis of a joint four-variable analysis. The analysis is refocused on the Temperature--Humidity pair, jointly available across 205{,}005 frames (95.76%) from 4 Elsys EMS sensors. The pipeline sequentially performs anomaly detection (modified Z-score, Isolation Forest), bivariate Principal Component Analysis, clustering (K-means, DBSCAN), and a multilayer perceptron predicting humidity from temperature and time, whose residuals serve as a detector for slow drift. On real-world data: Temperature--Humidity correlation r=-0.662, two-component PCA (PC1 =83.1% of variance), Isolation Forest detects 2.12% multivariate anomalies while univariate Z-score detects none, calibrated DBSCAN isolates 0.17% noise across 13 clusters, and the MLP achieves $R^2=0.672$ (RMSE =10.54%) in cross-validation. This work demonstrates that per-variable coverage auditing prior to modeling is a necessary methodological step for heterogeneous multi-sensor IoT datasets.

0.24

Energy-Aware LoRaWAN Design for Long-Lived Agricultural Sensing: Insights from a Multi-Year Deployment and Controlled Platform Comparison

cs.NI ·2026-09-13 ·Carl Dickinson, Shishir Nagaraja, Chuadhry Mujeeb Ahmed
top venue similarity 0.55
Abstract · 8 pages, 5 figures. Presented at the 4th International Workshop on Long and Short Range Wireless Technologies Applied to IoT for Networks of…

Agricultural IoT nodes are often far from mains power and have limited access for maintenance. Therefore, IoT deployments benefit from low-power, long-range communication such as LoRaWAN. However, communication alone does not guarantee multi-year operation. Previous work has measured communication energy, modelled system lifetime, and documented long-lived deployments. This paper connects long-term deployment evidence with controlled platform measurements. The AgriTrust deployment has operated for 2 years and 8 months using MKR WAN1310-based Squirrel Box nodes. Building on this evidence, we compared the MKR WAN1310 and STM32WL LoRaWAN platforms using time-resolved current traces during confirmed-uplink cycles. For this outdoor comparison, we tested nine combinations of payload size and data rate with three repetitions each. Both platforms achieved 3/3 ACKed packets in every condition. The STM32WL had lower cycle energy than the WAN1310 in all tested conditions. Cycle energy ranged from 0.0350 J to 0.3550 J for STM32WL and from 0.0698 J to 0.5662 J for WAN1310. These communication events are brief, while sleep and leakage currents persist between cycles. The STM32WL sleep current was recorded at 59.6 nA, while the WAN1310 sleep current was 104 microamperes, approximately 1745 times that of the STM32WL. This difference shows that sleep current is a first-order determinant of long-term viability. However, the whole-system energy budget also depends on sensing loads, duty cycle, communication energy, and harvested-energy support. The study should be treated as a controlled characterisation, not a universal comparison across all sites, firmware stacks, or LoRaWAN modes.

0.41

CleanCity-BinSense: An IoT-Enabled Smart Waste Management System with Configurable Real-Time Fill Monitoring and Nearest-Neighbor Route Optimization

cs.NI ·2026-09-08 ·Mohammad Adnan Kabir, Intifad Muhammad Sayeed
similarity 0.53
Abstract · 8 pages,11 figures

CleanCity-BinSense addresses inefficiencies in urban waste management in developing cities, where fixed-schedule collection routes lead to overflowing bins and wasted fuel. This paper presents CleanCity-BinSense, a low-cost, end-to-end IoT-enabled smart waste management system for scalable real-time waste monitoring and demand-driven collection. The system integrates a solar-powered sensor node with an ultrasonic sensor for real-time bin fill-level monitoring. A key contribution is a configurable sensing model based on two calibration parameters, FULL_DISTANCE and EMPTY_DISTANCE, enabling deployment across bins of varying sizes and geometries without firmware modification. Fill percentage is computed using a geometry-configurable linear normalization algorithm, validated through hardware experiments with a mean absolute error (MAE) of 0.38 cm, within the manufacturer-specified sensor tolerance. Sensor readings are transmitted via Wi-Fi to a centralized web platform providing role-based dashboards for administrators, operators, and drivers, along with a public real-time bin-status map. The system also incorporates a lightweight nearest-neighbor route planning algorithm using SQL Server's spatial function to generate proximity-based collection routes with low computational overhead. Experimental evaluation shows an average end-to-end system latency of 5.3 seconds, dominated by the sensing interval rather than network overhead, while route generation for typical urban collection zones completes in under 100 ms. These results demonstrate the feasibility of a low-cost, configurable, infrastructure-light smart waste management system for heterogeneous urban waste networks in resource-constrained environments such as Dhaka, Bangladesh.

0.31

A Real-Time Tsetlin Machine-based Non-intrusive Load Monitoring System on MCUs

cs.LG ·2026-08-19 ·Han Wu, Tianhang Tan, Shengyu Duan, Alex Yakovlev, Rishad Shafik +1 more
published similarity 0.53
Abstract · Accepted by International Symposium on the Tsetlin Machine (ISTM 2026)

Non-Intrusive Load Monitoring (NILM) systems estimate individual appliance energy consumption from a single aggregate meter, without requiring separate sensors for each device. By installing a single meter that measures a building's total electricity consumption, NILM algorithms can determine the active status of each appliance. However, traditional NILM systems use computationally intensive optimization algorithms to process offline data, limiting their capability for on-device deployment, where sensitive household data must be processed locally. This paper proposes a Tsetlin Machine (TM)-based NILM framework, targeting real-time applications on resource-constrained microcontrollers (MCUs), enabling privacy-preserving edge deployment. The problem is reformulated as a classification task, and the proposed approach achieves an average precision of 90% and recall of 96% for two-appliance classification, and 77% precision and 80% recall for four appliances on the REDD dataset. The trained model occupies only 17 KB of flash memory and achieves an inference latency of 0.43 ms on an ESP32, demonstrating its suitability for NILM applications on MCUs.

0.33

Large Language Model based air quality monitoring and localized alert generation

cs.DC cs.CY ·2026-09-16 ·Ricardo Vieira, Luis Tavares, Kaylane Lima, Lucas De Souza, Arthur Poggy +3 more
similarity 0.51
Abstract · 21 pages, 12 figures

Poor indoor air quality can cause up to five times more direct health problems to occupants than outdoor air. In particular, it may cause headaches, fatigue, eye/throat irritation, and long-time exposure is linked to respiratory and heart as well as some forms of cancer. Despite the importance of indoor health and well-being, most current monitoring devices and systems (usually for offices and workspaces) are passive. The Environmental Quality Monitor (EnQyMo) platform is a generic Internet of Things (IoT) middleware designed to process several sensor data related to air quality in indoor spaces and correlate this data with health exposure risks of users/workplace employees. Using Bluetooth Low Energy (BLE) beacons and a mobile IoT middleware it is able to identify the (smartphone) users exposed to these polluted air or high CO2 (carbon dioxide) levels, and generate location-specific alarms only to the users at the places with the unhealthy air conditions. At the core of EnQyMo is an agency of Large Language Models (LLMs) capable of interpreting regulatory standards and scientific literature to automatically identify critical health exposure levels.

0.30

Federated learning for remote IoT over LPWAN: Preliminary insights from structural health monitoring

cs.NI ·2026-11-08 ·Lakshmiprasanna Bandaru, Anshika Singh, Tarutal Ghosh Mondal, T. Jothi Saravanan, Siddhartha S. Borkotoky
similarity 0.51
Abstract

Realizing federated learning (FL) in remote regions lacking reliable cellular infrastructure is challenging, as it requires dependable communication among participating devices. Low-power wide-area networks (LPWANs) offer an attractive communication solution for such scenarios. However, their limited data rates necessitate careful investigation of the communication-learning trade-offs and mechanisms to reduce communication overhead. This paper presents an investigation of the Long Range (LoRa) LPWAN technology for FL-based structural health monitoring (SHM), a representative remote IoT application. We consider a SCAFFOLD-based FL framework for multi-class anomaly detection and analyze the latency-accuracy trade-off. We also examine strategies for allocating the LoRa spreading factor (SF) during model-update exchange. Numerical results show that, with appropriate SF allocation, LoRa-supported FL-SHM can achieve competitive learning accuracy. In particular, jointly accounting for link distances and clients' dataset sizes when selecting the SF provides a favorable balance between convergence performance and communication latency. These preliminary findings offer useful insights into the design of FL systems over LPWANs for remote IoT deployments.

0.24

Real-World Deployment and Performance Characterisation of Fog-Based Deep Learning for Cold-Chain Temperature Prediction over LoRaWAN

cs.DC cs.LG ·2026-09-12 ·Jeremiah Taguta, Jean Frederic Isingizwe Nturambirwe, Clement Nthambazale Nyirenda
similarity 0.49
Abstract · 7 pages, 4 figures

Fresh fruits and vegetables (FFVs) are highly perishable, and cold-chain breaks contribute significantly to global food waste. While Machine Learning (ML) can enable proactive intervention, cloud-based inference faces challenges such as latency and data loss. Fog computing addresses these issues but has been tested only in simulation for FFV cold-chain temperature prediction. To the best of the authors' knowledge, this paper presents its first real-world deployment. A fog-deployed LSTM-GRU model predicted cold-room temperature using LoRaWAN sensor data collected from a South African apple cold-storage facility with induced cold-chain breaks. Running entirely on a Raspberry Pi 4 with no cloud dependency, the system generated conditional SHAP explanations only when a break is predicted. The deployed system predicts cold-room temperature with an MAE of 0.2°C at roughly 0.2 kWh per day ($\approx 0.7$ Wh per prediction). Predictions were delivered in under one second (555 ms), dominated by network and messaging rather than computation, with conditional explanations adding modest cost. SHAP consumes 28% more CPU but is well within the hardware's capacity. The model attributes its predictions primarily to temperature, humidity, and their interaction. Critically, the deployment surfaced what simulation cannot: a sensor-triggered single point of failure, alongside genuine resilience, autonomous recovery from infrastructure faults and continued operation through internet loss. These are the first published deployment benchmarks for fog-based temperature prediction in FFV cold chains, establishing that explainable temperature forecasting is feasible on resource-constrained edge hardware. Future work includes asynchronous sensor fusion, commercial cold chain deployment, alternative model architectures, and causal analysis.

0.21

Performance Analysis of LoRa and LR-FHSS in 3GPP LEO Satellite and HAPS Channel Scenarios for Remote Area IoT Coverage

eess.SP ·2026-09-07 ·Jean Michel de Souza Sant'Ana, Nurul Huda Mahmood, Vinicius Pozzobon Borin
published similarity 0.49
Abstract · 5 pages, 5 figures, 2 tables, presented at Wireless Europe 2026, Rimini, Italy, June 2026

In this paper, we analyze and compare the performance of LoRa and LR-FHSS in a remote area Internet-of-Things (IoT) connectivity scenario using a low-earth orbit (LEO) satellites and high-altitude platform station (HAPS)-mounted gateway. We conducted a link budget analysis to evaluate communication stability to assess the ability of the technologies to support the different distances and behaviors using a 3GPP channel model for non-terrestrial networks. Several parameters are considered, such as altitude, minimum elevation angle as well as the impact of different types of loss, such as shadow and fast fading, ionosphere scintillation loss, for example. Our findings highlight the performance gap between LR-FHSS and LoRa in terms of both connectivity. We also highlight how lower HAPS altitudes can benefit certain LoRa settings compared to LEO satellites. We show that HAPS can enable the use of lower LoRa spreading factors, which improves scalability and energy efficiency, while LR-FHSS and a higher spreading factor LoRa remain the solution for LEO satellites.

0.36