CS Paper Radar

Data Quality Audit and Bivariate Temperature-Humidity Analysis of a Long-Term LoRaWAN Network: Anomaly Detection, PCA, Clustering and Machine Learning

Mamadou Sow

cs.LG cs.DCphysics.ao-phstat.ML ·submitted 2026-10-23 10:04 UTC · v1

Abstract

Long-term environmental IoT/LPWAN deployments often aggregate heterogeneous data streams from diverse devices without systematic auditing of each variable's actual coverage prior to analysis-an increased risk when multiple sensor types coexist within the same network. This work proposes a C++17 processing pipeline applied to the Tour Perret LoRaWAN dataset (421 937 frames, June 2021--June 2023, 5 devices). A systematic coverage audit integrated into the extraction phase reveals that CO2 is completely missing (0% coverage) and pressure is reported only by an isolated base module (Wyres, 4.24% of the corpus), invalidating the initial hypothesis of a joint four-variable analysis. The analysis is refocused on the Temperature--Humidity pair, jointly available across 205{,}005 frames (95.76%) from 4 Elsys EMS sensors. The pipeline sequentially performs anomaly detection (modified Z-score, Isolation Forest), bivariate Principal Component Analysis, clustering (K-means, DBSCAN), and a multilayer perceptron predicting humidity from temperature and time, whose residuals serve as a detector for slow drift. On real-world data: Temperature--Humidity correlation r=-0.662, two-component PCA (PC1 =83.1% of variance), Isolation Forest detects 2.12% multivariate anomalies while univariate Z-score detects none, calibrated DBSCAN isolates 0.17% noise across 13 clusters, and the MLP achieves $R^2=0.672$ (RMSE =10.54%) in cross-validation. This work demonstrates that per-variable coverage auditing prior to modeling is a necessary methodological step for heterogeneous multi-sensor IoT datasets.

Closest papers

Nearest neighbours by meaning across the whole index.

Federated learning for remote IoT over LPWAN: Preliminary insights from structural health monitoring

cs.NI ·2026-11-08 ·Lakshmiprasanna Bandaru, Anshika Singh, Tarutal Ghosh Mondal, T. Jothi Saravanan, Siddhartha S. Borkotoky
similarity 0.61
Abstract

Realizing federated learning (FL) in remote regions lacking reliable cellular infrastructure is challenging, as it requires dependable communication among participating devices. Low-power wide-area networks (LPWANs) offer an attractive communication solution for such scenarios. However, their limited data rates necessitate careful investigation of the communication-learning trade-offs and mechanisms to reduce communication overhead. This paper presents an investigation of the Long Range (LoRa) LPWAN technology for FL-based structural health monitoring (SHM), a representative remote IoT application. We consider a SCAFFOLD-based FL framework for multi-class anomaly detection and analyze the latency-accuracy trade-off. We also examine strategies for allocating the LoRa spreading factor (SF) during model-update exchange. Numerical results show that, with appropriate SF allocation, LoRa-supported FL-SHM can achieve competitive learning accuracy. In particular, jointly accounting for link distances and clients' dataset sizes when selecting the SF provides a favorable balance between convergence performance and communication latency. These preliminary findings offer useful insights into the design of FL systems over LPWANs for remote IoT deployments.

0.24

LoRIS: LoRaWAN-based IoT Platform for Sustainability Monitoring in Hotels

cs.NI ·2026-08-18 ·Yash Pandey, Angus Gray, Reza Serati, Oscar Zhu, Emil Juvan +7 more
unusual similarity 0.61
Abstract

The hospitality sector is a major source of global greenhouse gas emissions, water stress, and waste generation, yet sustainability reporting in hotels remains constrained by coarse, manually collected operational data. We present LoRIS (LoRaWAN-based IoT platform for sustainability monitoring in hotels), a LoRaWAN-based sensing system that delivers high-resolution measurements of resource consumption, environmental conditions, and guest behaviour across geographically distributed hotel properties. The architecture follows the canonical LoRaWAN reference model and is built for the operational realities of hospitality deployments: restrictive hotel IT policies, guest privacy expectations, rapid and reversible installation, and multi-year battery operation. Privacy-by-design guides modality selection and deployment zoning, and end-to-end encryption protects data from sensor to dashboard. This system has been running since February 2022 and currently spans 850 sensors of 19 types across 21 sites in Australia and Slovenia, covering both the AU915 and EU868 regulatory regions. The platform has generated over 202 million sensor records and ingests approximately 245,000 uplink messages per day on managed serverless infrastructure. Our system has been successfully used for seven field studies spanning food waste, energy consumption, and water consumption, including controlled intervention experiments that measure environmental outcomes and guest satisfaction in parallel. This system shows that LoRaWAN sensing can be deployed at scale in operational hotels without compromising guest experience or privacy.

0.29

A Systematic Sample Size Analysis of ML-Based Path Loss Prediction for LPWAN

cs.NI cs.LG ·2026-08-11 ·Robert Bitterling, Christian Nettersheim, Jörn Hees, Michael Rademacher
published similarity 0.52
Abstract · Accepted at IEEE Conference on Local Computer Networks (LCN)

Low Power Wide Area Networks like LoRa are increasingly deployed for smart city applications, requiring accurate path loss prediction for effective network planning. Traditional (empirical) propagation models often exhibit limited accuracy in these scenarios. We investigate machine learning models for LoRa path loss prediction, systematically analyzing how prediction accuracy scales with training set size using real-world measurements from an urban deployment. Our approach employs a Random Forest with LiDAR-derived terrain features and k-Nearest Neighbors with coordinate data, comparing their performance against established empirical models and specialized LPWAN models. Under random pooled splits, both ML models consistently outperform the considered baseline models across the evaluated training-set sizes. At maximum training size, they achieve RMSE values below 6.5 dB compared to 9.7 dB for the best baseline, indicating accurate within-deployment interpolation. A leave-one-gateway-out check qualifies this result: RF shows placement-dependent transfer to held-out gateways, with moderate degradation for several gateways but larger errors for others, whereas coordinate-only k-NN degrades substantially when the gateway location is unseen

0.22

Energy-Aware LoRaWAN Design for Long-Lived Agricultural Sensing: Insights from a Multi-Year Deployment and Controlled Platform Comparison

cs.NI ·2026-09-13 ·Carl Dickinson, Shishir Nagaraja, Chuadhry Mujeeb Ahmed
top venue similarity 0.51
Abstract · 8 pages, 5 figures. Presented at the 4th International Workshop on Long and Short Range Wireless Technologies Applied to IoT for Networks of…

Agricultural IoT nodes are often far from mains power and have limited access for maintenance. Therefore, IoT deployments benefit from low-power, long-range communication such as LoRaWAN. However, communication alone does not guarantee multi-year operation. Previous work has measured communication energy, modelled system lifetime, and documented long-lived deployments. This paper connects long-term deployment evidence with controlled platform measurements. The AgriTrust deployment has operated for 2 years and 8 months using MKR WAN1310-based Squirrel Box nodes. Building on this evidence, we compared the MKR WAN1310 and STM32WL LoRaWAN platforms using time-resolved current traces during confirmed-uplink cycles. For this outdoor comparison, we tested nine combinations of payload size and data rate with three repetitions each. Both platforms achieved 3/3 ACKed packets in every condition. The STM32WL had lower cycle energy than the WAN1310 in all tested conditions. Cycle energy ranged from 0.0350 J to 0.3550 J for STM32WL and from 0.0698 J to 0.5662 J for WAN1310. These communication events are brief, while sleep and leakage currents persist between cycles. The STM32WL sleep current was recorded at 59.6 nA, while the WAN1310 sleep current was 104 microamperes, approximately 1745 times that of the STM32WL. This difference shows that sleep current is a first-order determinant of long-term viability. However, the whole-system energy budget also depends on sensing loads, duty cycle, communication energy, and harvested-energy support. The study should be treated as a controlled characterisation, not a universal comparison across all sites, firmware stacks, or LoRaWAN modes.

0.41

Towards an approach to multivariate outlier detection for District Heating System data

cs.LG eess.SY ·2026-08-11 ·Rajko Turudija, Dušan Stojiljković, Milan Zdravković, Marko Ignjatović
publishedbenchmark similarity 0.51
Abstract · 10 pages, 4 figures. This preprint corresponds to the paper published in Lecture Notes in Networks and Systems, vol. 860 (ICIST 2024), Sprin…

In this paper, we test different methods for multivariate detection of outliers in the data of transmitted heat energy in the selected substation of local District Heating System, by also considering outside ambient temperature, namely Z-score (univariate, as a benchmark), Mahalanobis distances, Principal Component Analysis (PCA), Isolation Forest and Hotelling's T-squared test. The overall research aims at uncovering irregular plant operation, with a wider objective of identifying the opportunities for reducing the consumption of gas in central heating plants as well as the CO2 emission. The proposed approach considers specific domain circumstances, such as irrelevance of zero transmit-ted energy timepoints as indication of off-grid plant. The outcomes of the different methods are discussed with domain experts. It was concluded that PCA, Isolation Forest and Hotelling method provide relevant results. Finally, we adopt the ensemble method (selection based on the agreement of all three methods on the detected outliers) as the final approach.

0.65

Cross-Corpus Evaluation of Generalizable Vulnerability Detection in IoT Firmware

cs.CR cs.LG ·2026-08-11 ·Sadib Hassan Rumman, Md. Shariful Islam, Md Rayhanur Rahman
benchmark similarity 0.51
Abstract · 7 pages, 1 Figure, 6 Tables

IoT firmware vulnerability detection is constrained by ecosystem heterogeneity, resource-limited platforms, and benchmark quality limitations. Existing datasets are often synthetic or general-purpose and lack human-verified, contamination-screened annotations, leaving cross-corpus generalization across training sources, architectures, and curriculum design underexplored. In this study, we have introduced IoTVulBench, a human-verified benchmark for cross-corpus firmware vulnerability detection. IoTVulBench was built from GitHub repositories, validated by three expert reviewers, and evaluated on a contamination-screened held-out target across five architectures, two tuning methods, and three curriculum strategies, with ensemble, distillation, and robustness analyses. Models trained on IoTVulBench reached the highest Matthews Correlation Coefficient (MCC) among undersampling-matched single-source datasets, at 0.58 versus 0.44 for PrimeVul and 0.39 for D2A. Staged curriculum learning raised MCC to 0.69, and a diversity-optimized ensemble reached 0.73. This gain represents a 0.42 MCC improvement over the strongest reference comparator, a static analyzer with an MCC of 0.31, and a 0.29 MCC improvement over the strongest single-source dataset, PrimeVul. At a 0.5% false-positive rate, the model missed only 21% of vulnerabilities versus 71% for the comparator. The model also retained 86% of its performance under identifier renaming, with strong calibration. These results indicate that domain-matched training data and curriculum design, rather than model scale alone, drive generalization in firmware vulnerability detection, and yield both a benchmark and deployment-ready configurations for IoT security.

0.07

InFactPlanner: Planning Sustainable Geo-Distributed LLM Data Centers

cs.DC cs.AI ·2026-08-13 ·Nicoletta Tsiopani, Moysis Symeonides, George Pallis, Marios D. Dikaiakos
published similarity 0.50
Abstract · Author copy of paper published at 34th International Symposium on the Modeling, Analysis, and Simulation of Computer and Telecommunication S…

The rapid growth of LLM inference is shifting sustainability concerns from one-time training to continuous serving, where infrastructure decisions shape energy use, carbon emissions, water consumption, and service quality. Yet operators often need to compare deployment alternatives before large-scale infrastructure is built, making direct measurement costly, slow, and sometimes infeasible. We present InFactPlanner, a trace-driven decision-support framework for what-if analysis of sustainable AI data center deployment for LLM inference across single and geo-distributed sites. InFactPlanner combines query traces, hardware-model profiles, candidate site configurations, PUE/WUE parameters, renewable generation models, and time-varying grid carbon intensity to estimate power, energy, carbon emissions, water use, latency, and server utilization. The framework abstracts low-level serving effects into configurable hardware-model profiles, enabling rapid comparison of site selection, capacity placement, hardware, model, renewable integration, and routing choices. We validate the energy accounting pipeline by reproducing reference LLM inference energy estimates with less than 10% deviation, evaluate scalability across multiple data centers and server counts, and demonstrate scenario-driven decision analyses for hardware selection, renewable placement, geographic deployment, and carbon-aware routing. Our results show that sustainability-optimal choices can differ from latency-optimal ones, and that the carbon value of deployment depends strongly on the local grid mix.

0.54

Real-World Deployment and Performance Characterisation of Fog-Based Deep Learning for Cold-Chain Temperature Prediction over LoRaWAN

cs.DC cs.LG ·2026-09-12 ·Jeremiah Taguta, Jean Frederic Isingizwe Nturambirwe, Clement Nthambazale Nyirenda
similarity 0.50
Abstract · 7 pages, 4 figures

Fresh fruits and vegetables (FFVs) are highly perishable, and cold-chain breaks contribute significantly to global food waste. While Machine Learning (ML) can enable proactive intervention, cloud-based inference faces challenges such as latency and data loss. Fog computing addresses these issues but has been tested only in simulation for FFV cold-chain temperature prediction. To the best of the authors' knowledge, this paper presents its first real-world deployment. A fog-deployed LSTM-GRU model predicted cold-room temperature using LoRaWAN sensor data collected from a South African apple cold-storage facility with induced cold-chain breaks. Running entirely on a Raspberry Pi 4 with no cloud dependency, the system generated conditional SHAP explanations only when a break is predicted. The deployed system predicts cold-room temperature with an MAE of 0.2°C at roughly 0.2 kWh per day ($\approx 0.7$ Wh per prediction). Predictions were delivered in under one second (555 ms), dominated by network and messaging rather than computation, with conditional explanations adding modest cost. SHAP consumes 28% more CPU but is well within the hardware's capacity. The model attributes its predictions primarily to temperature, humidity, and their interaction. Critically, the deployment surfaced what simulation cannot: a sensor-triggered single point of failure, alongside genuine resilience, autonomous recovery from infrastructure faults and continued operation through internet loss. These are the first published deployment benchmarks for fog-based temperature prediction in FFV cold chains, establishing that explainable temperature forecasting is feasible on resource-constrained edge hardware. Future work includes asynchronous sensor fusion, commercial cold chain deployment, alternative model architectures, and causal analysis.

0.21