CS Paper Radar

Energy-Aware Receiver-initiated MAC Protocol for Energy Harvesting IoT

Sohail Sarang, Praveen Kumar Donta, Dejan Vukobratović

cs.NI cs.ETcs.PF ·submitted 2026-10-08 08:33 UTC · v2
unusual

Abstract

Energy harvesting (EH) technology has emerged as a key approach for extending the operational autonomy of Internet of Things (IoT) devices. In this context, medium access control (MAC) protocols for EH-IoT make use of the harvested energy efficiently to enhance the application performance. However, many existing MAC protocols rely on stored energy the battery in devising energy-aware strategies, which can interrupt the device operation and hinder the execution of ongoing tasks in dynamic and low EH conditions. To address this, this paper presents an energy-aware receiver-initiated MAC protocol for EH-IoT devices, called EARI-MAC, that adjusts the duty cycle of the receiver device based on stored energy and current harvesting power using the mathematical formulation. This approach supports sustained receiver operation under low EH conditions and improved application performance when harvested energy is abundant. The performance of the EARI-MAC has been evaluated in simulation using the real solar data gathered in Novi Sad, for three consecutive days. The simulation results demonstrate that the EARI-MAC utilizes the available energy resources efficiently and improves the packet delivery ratio and network throughput by more than 10%, reduces the receiver energy consumption by 5.6% and 8.2% and energy consumption per bit by 9.6% and 13.9% compared with QPPD-MAC and energy-unaware MAC, respectively.

Comment
Submitted to 34th Telecommunications Forum (TELFOR 2026)

Closest papers

Nearest neighbours by meaning across the whole index.

System-Level Evaluation of Uplink Access Schemes for Ambient IoT

cs.NI ·2026-10-22 ·Douglas Dziedzorm Agbeve, Henrique Duarte Moura, Andrey Belogaev, Jeroen Famaey
similarity 0.68
Abstract

Ambient Internet of Things (A-IoT) devices operate under stringent energy constraints, relying on harvested power in the $μ$W-to-mW range and limited energy storage. The A-IoT air interface for active devices is still under development; we therefore use Narrowband Internet of Things (NB-IoT) as an implementable reference for evaluating autonomous Uplink (UL) access under harvested energy. Under these conditions, the standard NB-IoT contention-based Random Access (RA) procedure incurs substantial per-packet overhead, making UL access in dense A-IoT networks increasingly energy-expensive. Context-retaining UL access schemes reduce this overhead, but their energy-latency trade-offs are insufficiently studied in literature under realistic harvesting and protocol constraints. To address this gap, we extend the LENA-NB ns-3 module with solar energy harvesting, supercapacitor storage, and a hysteretic brown-out mechanism, and propose Hybrid Scheduling Request (HSR), a hybrid UL access scheme combining reserved request occasions with opportunistic contention. We compare RA, Scheduling Request (SR), HSR and an Idealized Fast Uplink Grant (FUG) serving as a performance bound. Results show that HSR reduces mean packet delay by up to 69% and SR reduces energy per delivered bit by up to 24%, both relative to RA.

0.18

Adaptive Wake-on-Radio Communication for Batteryless IoT Systems

cs.NI ·2026-11-16 ·Hooman Sarvghadi, Juan Felipe Gutiérrez Gómez, Negar Halakou, Nasrin Razmi, Andrés Gómez
published similarity 0.66
Abstract · This is an open-access, author-archived version of a manuscript published in ApplePies 2026 Conference

Batteryless Internet of Things (IoT) systems powered by energy harvesting require communication mechanisms that dynamically adapt to fluctuating energy availability while maintaining ultra-low-power operation. This paper presents a Wake-on-Radio (WoR) communication framework for low-power intermittent IoT systems in which the node's communication state adapts to its stored energy. The framework uses a batteryless IoT node that integrates a photovoltaic harvester, a 570 $μ$F capacitor, two voltage supervisors, and a microcontroller. The voltage supervisors drive an energy-aware finite state machine that switches the node between Shutdown, Low-Power Listening (LPL), Transmit, and Receive modes. The proposed system employs the integrated WoR capability of the transceiver, eliminating the need for additional wake-up hardware. For the evaluated traffic conditions and an LPL wake-up rate of 16 Hz, the measured power consumption is approximately 1.2 $μ$W in the Shutdown mode, 300 $μ$W during LPL, 531 $μ$W for reception, and 627 $μ$W for transmission. System-level experiments under solar-harvesting operation validate the proposed framework, demonstrating reliable bidirectional communication with no packet losses observed across repeated runs at a harvested input power of 1.2 mW.

0.26

Secure Wireless Information Transfer and Energy Harvesting in HAPS-Based Network

cs.IT eess.SY ·2026-08-23 ·Khaled Humadi, Gunes Karabulut-Kurt, Wessam Ajib, Wei-Ping Zhu
published similarity 0.53
Abstract

High-altitude platform station (HAPS) serves as a promising enabler for wide-area connectivity of low-power wireless devices, particularly in remote and underserved regions. However, the strong line-of-sight characteristics of HAPS links increase the risk of eavesdropping, while the limited energy budget of ground devices remains a major operational constraint. In this work, we propose a secure wireless information and energy harvesting framework for HAPS-based networks in the presence of spatially distributed eavesdroppers. The proposed system integrates friendly jamming and power transfer nodes equipped with null-steering capability antennas, such that they not only degrade the reception quality at eavesdroppers but also act as additional radio-frequency energy sources for legitimate users. A time-switching wireless information and power transfer architecture is adopted at the user side. Under this framework, we derive tractable expressions for the joint rate-energy coverage and the average secrecy rate using stochastic geometry tools. Numerical and Monte Carlo results validate the developed analysis and reveal key design trade-offs among the time allocation factor, null-steering-zone radius around each user, and jammer transmit power. In particular, the results show that properly coordinated null-steering jamming can simultaneously support secure communication and adequate wireless power transfer, while an appropriate choice of system parameters, such as time allocation factor and jamming power, is required to balance harvested energy, communication reliability, and secrecy performance.

0.31

Harvesting-Aware Routing for Low-Latency Reliable Transmission in Interference-Powered Networks

cs.NI ·2026-10-09 ·Azadeh Sheikholeslami, Allan Nguyen
similarity 0.53
Abstract

We consider a multi-hop wireless network where energy-harvesting nodes rely solely on ambient radio-frequency interference as their power source. The goal is to deliver a packet from source to destination with minimum latency while guaranteeing a target end-to-end outage probability under Rayleigh fading. This gives rise to a joint routing and power allocation problem in which interference plays a dual role: it provides harvestable energy, but also impairs link reliability. We first transform the intricate, multiplicative end-to-end outage constraint into an additive form. Then, we propose two optimal algorithms. The first, HOPE, minimizes the bottleneck harvesting latency, i.e., the longest energy-accumulation time along the path, by reducing the problem to a least-cost path computation on a graph with interference-aware link weights. The second, THOPE, extends the objective to total end-to-end latency, adding the cumulative transmission delay, and likewise admits a closed-form least-cost path solution. Both algorithms are solved in polynomial time via Dijkstra's algorithm and yield explicit expressions for the optimal transmit powers. Extensive simulations reveal that HOPE and THOPE reduce the average total latency by up to an order of magnitude compared with shortest-path and minimum-energy benchmarks, while exhibiting sharply concentrated delay distributions that are largely insensitive to interferer density.

0.23

A Modular IoT-Enabled Remote Laboratory Platform for Hybrid Energy System Research and Engineering Education

eess.SY ·2026-09-01 ·Lamine Chalal, Louis Olivier, Pierre Liennard, Allal Saadane, Ahmed Rachid
similarity 0.53
Abstract

Remote laboratory systems improve accessibility in engineering education and research by enabling Internet-based interaction with physical equipment. This paper presents a modular IoT-enabled remote laboratory platform for hybrid energy system studies, combining renewable energy emulators, battery storage, and programmable loads within a three-interface architecture based on a web HMI, TIA Portal, and MATLAB/Simulink, all connected through a Talk2M VPN cloud. An industrial PLC and IoT gateway provide deterministic local control as well as secure remote access and monitoring. A hierarchical energy-management algorithm is validated by comparing local and remote executions under identical wind and irradiance profiles. The results show small differences in the energy balances of the renewable sources, battery, and load, while typical communication delays are on the order of 100 ms. Consequently, the platform supports research-grade remote experimentation and project-based learning in control and energy systems engineering.

0.25

Mobile Backscatter Communication for the Battery-less Internet of Things

cs.NI ·2026-09-01 ·Weining Song, Thiemo Voigt, Stefanos Kaxiras, Yuan Yao, Luca Mottola
published similarity 0.52
Abstract · 11 pages, 20 figures. Extended version of the paper accepted at MSWiM 2026

We enable backscatter communication in the battery-less mobile Internet of Things (IoT). Backscatter communication is extensively studied in static settings. Existing designs are, however, fundamentally mismatched with mobility and time-varying energy patterns. Channel conditions rapidly fluctuate, impacting the achievable data rates and thus transmission costs. Energy availability varies unpredictably, possibly forcing devices to remain quiescent to recharge energy buffers. The two issues compound each other: while recharging, a battery-less mobile IoT device may miss more favorable channel conditions. We design a lightweight decision system that dynamically determines when to transmit by checking short-term trends in signal strength, while using Non-volatile Memory (NVM) to retain packets in unfavorable channel conditions and across energy failures. Using a prototype we built and real-world mobility and power traces, we compare our design against a rate-adaptive baseline that only considers the instantaneous channel conditions. Experimental results show that our system improves throughput by up to 5.16x while reducing transmission energy consumption by up to 47.3%, with only 0.23% - 7.3% additional energy overhead.

0.40

Fundamentals of Energy-Efficient Hardware Configurations for Wireless Links with Sleep Modes

cs.IT ·2026-09-10 ·Anders Enqvist, Özlem Tuğfe Demir, Cicek Cavdar, Emil Björnson
published similarity 0.52
Abstract · 13 pages, 8 figures. A preliminary version was presented at IEEE VTC2024-Spring

In this paper, we examine the energy efficiency (EE) of a base station (BS) with multiple antennas. We use a state-of-the-art power consumption (PC) model that captures the passive and active parts of the transceiver circuitry, including the effects of radiated power, signal processing, and passive consumption. The paper treats the transmit power, bandwidth, and number of antennas as the optimization variables. We provide novel closed-form solutions for the optimal ratios of power per unit bandwidth and power per transmit antenna, and discover a new relationship in which the radiated power equals the total transceiver power at the EE-optimal operating point. A central finding is that the EE-optimal signal-to-noise ratio (SNR) collapses to a universal numerical constant of approximately 5.93 dB, independent of channel and hardware parameters. We present an algorithm that jointly optimizes the three design variables to achieve maximum EE under practical constraints, and provide analytical insight into whether maximum power or maximum bandwidth is optimal and how many antennas a BS should utilize. We further extend the optimization framework to incorporate quality-of-service (QoS) requirements and three advanced sleep modes of varying depth: absolute sleep, deep sleep, and idle mode. We characterize the optimal hardware configuration for each mode and determine when the rush-to-sleep strategy, which transmits briefly at the EE-optimal active configuration and sleeps the rest of the time, is optimal. Incorporating wake-up transition delays, we reveal how latency constraints and sleep-mode-specific transition times jointly dictate the optimal sleep mode for data packets with absolute deadlines. Together, these results indicate that energy-efficient operation requires treating transmission and sleep as a single coupled optimization.

0.58

A New Backscattering Dual-Polarized Rectenna for Wireless Power Transfer and IoT Applications

cs.CR cs.NI ·2026-09-08 ·Taki Eddine Djidjekh, Quentin Bernyer, Alexandru Takacs
published similarity 0.52
Abstract

This paper proposes an innovative dual-polarized backscattering rectenna that operates in two distinct modesenergy harvesting and backscattering modulation-driven by two-bit digital control signals. By utilizing two orthogonal (co-and cross-) polarizations, the design represents a versatile candidate for IoT applications such as battery-free wireless sensing, identification, localization, and communication. The rectenna's dual functionality is validated through its integration into a proofof-concept battery-free wireless sensor, where it operates both as an energy harvester and as a dual-polarized backscattering modulator. As a proof of concept, a 16-byte AES-128 encrypted payload is backscattered over the wireless power transfer link to enhance the resilience of a battery-free Bluetooth Low Energy (BLE) wireless sensor against replay, relay, and eavesdropping attacks.

0.45