CS Paper Radar

System-Level Evaluation of Uplink Access Schemes for Ambient IoT

Douglas Dziedzorm Agbeve, Henrique Duarte Moura, Andrey Belogaev, Jeroen Famaey

cs.NI ·submitted 2026-10-22 07:31 UTC · v1

Abstract

Ambient Internet of Things (A-IoT) devices operate under stringent energy constraints, relying on harvested power in the $μ$W-to-mW range and limited energy storage. The A-IoT air interface for active devices is still under development; we therefore use Narrowband Internet of Things (NB-IoT) as an implementable reference for evaluating autonomous Uplink (UL) access under harvested energy. Under these conditions, the standard NB-IoT contention-based Random Access (RA) procedure incurs substantial per-packet overhead, making UL access in dense A-IoT networks increasingly energy-expensive. Context-retaining UL access schemes reduce this overhead, but their energy-latency trade-offs are insufficiently studied in literature under realistic harvesting and protocol constraints. To address this gap, we extend the LENA-NB ns-3 module with solar energy harvesting, supercapacitor storage, and a hysteretic brown-out mechanism, and propose Hybrid Scheduling Request (HSR), a hybrid UL access scheme combining reserved request occasions with opportunistic contention. We compare RA, Scheduling Request (SR), HSR and an Idealized Fast Uplink Grant (FUG) serving as a performance bound. Results show that HSR reduces mean packet delay by up to 69% and SR reduces energy per delivered bit by up to 24%, both relative to RA.

Closest papers

Nearest neighbours by meaning across the whole index.

Energy-Aware Receiver-initiated MAC Protocol for Energy Harvesting IoT

cs.NI cs.ETcs.PF ·2026-10-08 ·Sohail Sarang, Praveen Kumar Donta, Dejan Vukobratović
unusual similarity 0.68
Abstract · Submitted to 34th Telecommunications Forum (TELFOR 2026)

Energy harvesting (EH) technology has emerged as a key approach for extending the operational autonomy of Internet of Things (IoT) devices. In this context, medium access control (MAC) protocols for EH-IoT make use of the harvested energy efficiently to enhance the application performance. However, many existing MAC protocols rely on stored energy the battery in devising energy-aware strategies, which can interrupt the device operation and hinder the execution of ongoing tasks in dynamic and low EH conditions. To address this, this paper presents an energy-aware receiver-initiated MAC protocol for EH-IoT devices, called EARI-MAC, that adjusts the duty cycle of the receiver device based on stored energy and current harvesting power using the mathematical formulation. This approach supports sustained receiver operation under low EH conditions and improved application performance when harvested energy is abundant. The performance of the EARI-MAC has been evaluated in simulation using the real solar data gathered in Novi Sad, for three consecutive days. The simulation results demonstrate that the EARI-MAC utilizes the available energy resources efficiently and improves the packet delivery ratio and network throughput by more than 10%, reduces the receiver energy consumption by 5.6% and 8.2% and energy consumption per bit by 9.6% and 13.9% compared with QPPD-MAC and energy-unaware MAC, respectively.

0.27

Task Offloading and Resource Allocation for Deterministic Service Provisioning in the IoT-Edge-Cloud Continuum

cs.NI ·2026-10-17 ·K. Aghababaiyan, B. Coll-Perales, J. Gozalvez
similarity 0.59
Abstract

Future networks will seamlessly integrate computing and communication resources within a unified ecosystem of IoT devices, edge nodes, and cloud servers, forming an IoT-edge-cloud continuum. Within such an ecosystem, tasks can be dynamically offloaded to leverage resources across the continuum and efficiently scale with demand. Task offloading has traditionally focused on minimizing task execution latency or energy consumption. In contrast, we propose a deterministic task offloading and resource allocation scheme for the joint management of communication and computing resources to support services with deterministic service-level requirements. The proposed scheme aims to maximize the number of tasks completed on time, rather than minimizing the latency of individual tasks. To do so, it exploits variable task latency requirements to distribute the workload across the continuum. It can also prioritize high-priority tasks under resource scarcity. Numerical evaluations demonstrate that a deterministic task offloading strategy scales more effectively and can better guarantee timely task completion by balancing resource utilization across the continuum.

0.22

Evaluating Polling Schemes for OFDMA Uplink Scheduling in Time-Sensitive Wi-Fi Networks

cs.NI ·2026-11-13 ·Douglas Dziedzorm Agbeve, Ferhat Van Herck, Andrey Belogaev, Jeroen Famaey
similarity 0.57
Abstract

IEEE 802.11ax introduced orthogonal frequency division multiple access (OFDMA) to improve channel utilization through concurrent multi-user transmissions. For effective uplink (UL) scheduling, the access point (AP) requires timely knowledge of buffered traffic at the stations (STAs). Explicit buffer-status polling provides this, yet each polling round can query only as many STAs as there are resource units (RUs). Scheduled-access, random-access, activity-based, and learning-based schemes address this buffer-status acquisition problem differently and have generally been evaluated in isolation under different conditions, so it remains unclear how they compare across time-sensitive workloads. We evaluate common schemes from the Wi-Fi standard and literature under three time-sensitive environments: a large-scale teleconferencing session, an industrial IoT deployment, and an extended reality (XR) service. The relative performance of the schemes depends strongly on traffic characteristics and offered load. In conferencing, activity-based and learning-based polling perform best, while conventional contention-based access remains competitive under light load. In the industrial scenario, scheduled-access most effectively delivers time-sensitive packets within their deadlines under heavy load, whereas contention-based access performs best under lighter load. In XR, OFDMA-based schemes achieve high video throughput that contention-based access cannot sustain; among them, activity-based polling achieves the lowest deadline-miss ratios for uplink head-tracking traffic, at the expense of longer video delay tails. These findings highlight the importance of selecting channel access and scheduling schemes according to traffic requirements and operating conditions.

0.24

Latency-Aware Uplink NOMA-MEC with PASS: A Feasibility-First Resource Allocation Framework

cs.IT ·2026-10-13 ·Sepehr Abolhasani, Saba Asaad, S. Mohammad Razavizadeh, Jiguang He
published similarity 0.56
Abstract · 6 pages, Accepted at IEEE GLOBECOM 2026 Workshops (PASS for NGWC)

Meeting hard task-completion deadlines for many simultaneously offloading users is the binding challenge in mobile-edge computing (MEC). As the user count grows, the transmit power required to satisfy every deadline within per-user budgets rises until no feasible allocation exists. We take a \emph{feasibility-first} view of this $K$-user problem in an uplink non-orthogonal multiple access (NOMA) MEC system served by a pinching-antenna system (PASS), whose radiating points establish strong line-of-sight (LoS) links that lower the received-power requirement. We formulate a latency-constrained joint optimization of transmit powers, CPU frequencies, and antenna configuration. We then derive a \emph{closed-form least-power feasibility test}: the componentwise-least allocation meeting every deadline. It certifies feasibility with the largest attainable margin to the power budgets and defines a practical \emph{quality-of-service (QoS)-feasibility outage} metric, the probability that no allocation meets all deadlines within budget. We solve the problem with a three-block alternating-optimization algorithm that is provably monotone-convergent and has polynomial complexity. Numerical results show that the proposed scheme sustains deadline feasibility at user loads where equal-power, orthogonal multiple access (OMA), and single-antenna baselines fail or degrade sharply, each by a mechanism predicted directly from the system model, whereas the proposed design degrades gracefully. Stress tests further show that feasibility is sustained under order-of-magnitude budget reductions, and that the pinching-antenna array itself enables constrained-budget operation. The result is a scalable, closed-form-initialized design for deadline-feasible offloading.

0.40

Age-Optimal Target Wake Time: Provably Good Wake Schedules for Energy-Constrained Wi-Fi Status Updating

cs.NI cs.IT ·2026-08-21 ·Haoyu Wang, Bo Sheng, Xiaoqian Zhang
publishedtheorycode/data similarity 0.56
Abstract · 11 pages, IEEE conference format; extended version (full proofs in the appendix) of a paper accepted at MSWiM 2026, Paris. This version adds…

Target Wake Time (TWT), introduced in IEEE 802.11ax, lets an access point schedule exactly when each station wakes, transmits, and dozes. Existing TWT schedulers optimize energy or throughput, treating information freshness at best as a constraint and offering no performance guarantees. We design the wake schedule itself for freshness: minimize the weighted average Age of Information (AoI) over stations subject to per-station energy budgets, where the decision variables are the TWT triples (wake interval, offset, service period duration). We derive a renewal-exact AoI model for TWT under per-SP block fading and validate it against packet-level 802.11ax simulation with ~1% mean error. We show that, unlike preemptive scheduling, non-preemptive TWT packing can be infeasible at schedule density 1, and identify the granularity condition under which a small-first best-fit packer provably succeeds. Around this we build Harmonic-Greedy, a scheduler combining a convex relaxation, anchor-optimized power-of-two rounding, and a best-of-uniform safeguard, and prove it is a constant-factor approximation: 4/ln 2 ~= 5.77 under a mild granularity assumption and 6/ln 2 ~= 8.66 unconditionally. We implement the complete system in ns-3 -- a TWT wake/doze mechanism integrated with the power-save architecture, plus the scheduler -- and show that it is the only scheduler that stays near a relaxation lower bound across all regimes: against a strong energy-greedy baseline it ties when per-station energy floors already pin the periods, and wins by 4-36% exactly where the schedule density is binding and must be redistributed by AoI weight or channel quality rather than by energy budget -- the regime our analysis identifies.

0.56

Harvesting-Aware Routing for Low-Latency Reliable Transmission in Interference-Powered Networks

cs.NI ·2026-10-09 ·Azadeh Sheikholeslami, Allan Nguyen
similarity 0.56
Abstract

We consider a multi-hop wireless network where energy-harvesting nodes rely solely on ambient radio-frequency interference as their power source. The goal is to deliver a packet from source to destination with minimum latency while guaranteeing a target end-to-end outage probability under Rayleigh fading. This gives rise to a joint routing and power allocation problem in which interference plays a dual role: it provides harvestable energy, but also impairs link reliability. We first transform the intricate, multiplicative end-to-end outage constraint into an additive form. Then, we propose two optimal algorithms. The first, HOPE, minimizes the bottleneck harvesting latency, i.e., the longest energy-accumulation time along the path, by reducing the problem to a least-cost path computation on a graph with interference-aware link weights. The second, THOPE, extends the objective to total end-to-end latency, adding the cumulative transmission delay, and likewise admits a closed-form least-cost path solution. Both algorithms are solved in polynomial time via Dijkstra's algorithm and yield explicit expressions for the optimal transmit powers. Extensive simulations reveal that HOPE and THOPE reduce the average total latency by up to an order of magnitude compared with shortest-path and minimum-energy benchmarks, while exhibiting sharply concentrated delay distributions that are largely insensitive to interferer density.

0.23

Active STAR-RIS-Aided RSMA IoT Systems: Performance Analysis, Model-Based and Data-Driven Resource Allocation Frameworks

eess.SP ·2026-09-06 ·Ngo Hoang Tu, Vo Nguyen Quoc Bao, Tran Thien Thanh
published similarity 0.56
Abstract · This work has been accepted for publication in IEEE Internet of Things Journal

STAR-RISs have emerged as a promising technology for achieving full-space signal coverage with low hardware complexity and energy consumption. In parallel, RSMA offers a flexible interference management mechanism that enhances spectral efficiency and user fairness. Integrating STAR-RIS with RSMA provides strong potential for robust and energy-efficient communications; however, the resulting double-fading cascaded channels and the inherent imbalance between near and far users pose reliability and fairness challenges. This study presents comprehensive information-theoretic and optimization frameworks for active STAR-RIS-assisted RSMA Internet-of-Things systems. Closed-form expressions for the OP and EC are derived under both the presence and absence of direct links. Based on these results, asymptotic OP and EC, diversity order, and array gain are analyzed to characterize system behavior. In addition, throughput-based and spectral-based energy efficiency metrics are investigated to quantify the tradeoffs between transmission performance and power consumption. To enhance user fairness, a fairness-oriented RA framework is developed to jointly optimize power allocation and rate-splitting coefficients using successive convex approximation and block coordinate descent techniques. To further improve scalability and real-time applicability, we introduce a data-driven RA framework based on DMNN, CMNN, and MXGB. This framework approximates the optimization-based solutions with substantially reduced computational complexity. Numerical results show that the proposed MXGB model achieves the shortest execution time while maintaining performance comparable to ground-truth-based benchmarks. Extensive Monte Carlo simulations validate the analytical results and demonstrate the effectiveness of the proposed frameworks.

0.32

Assessing Fixed-Batch Reporting for Deadline-constrained Inference in Intermittently Powered IoT

eess.SY cs.PF ·2026-09-06 ·Onel L. A. López
theory similarity 0.55
Abstract · Submitted to Transactions on Mobile Computing

Energy-harvesting Internet of Things (IoT) devices must decide whether to transmit each observation immediately or accumulate several observations before reporting to the edge. Early reports make information from initial observations available sooner at the edge but require more transmission actions, whereas larger batches save reports while delaying that information and retaining more state. We develop a unified analytical framework to compare this fixed-batching choice in scenarios with repeated, deadline-constrained inference cycles. Every configuration processes the same ordered observations and yields the same final posterior if all reports arrive, enabling a controlled comparison of the persistent state, actions, and energy costs induced by batching. Using reductions in Bayesian risk under the continuous ranked probability score (CRPS), we express long-run timely value exactly as a statistical-value-weighted sum of expected decision-weighted report availabilities. This separates the inferential value of observations from their availability at application-relevant decision times. We construct exact Markov-reward models accounting jointly for intermittent harvesting, finite storage, energy carry-over, unreliable delivery, retransmissions, and deadlines. We prove that the long-run regime is well defined and derive exact batch-size comparisons, timing benchmarks, and a decomposition of harvesting-law effects into within-cycle and carry-over contributions. Directly evaluable Gaussian and Gaussian-mixture belief specializations show that the preferred batch size can change with the prior, the decision-time profile, link reliability, harvested-energy statistics, and accumulation cost.

0.17