CS Paper Radar

Performance Evaluation of Fast Fourier Transforms on Emerging RISC-V Hardware with Vector Extension Support

Daniel Seibel, Kaveh Haghighi Mood, Jayesh Badwaik, Prateek Chawla, Stepan Nassyr, Andreas Herten

cs.MS cs.DCmath.NA ·submitted 2026-08-28 08:45 UTC · v1
code/data

Abstract

This manuscript presents a performance evaluation of Fast Fourier Transform (FFT) implementations on emerging processors supporting the RISC-V Vector Extension (RVV 1.0). By introducing juFFTe, a light-weight high-performance library for discrete Fourier transforms, it is demonstrated how effective vectorization of performance-critical FFT kernels can be achieved on RVV-enabled hardware. Comprehensive benchmarks on three RVV 1.0-ready processors, the SiFive X280, the X100 core of the SpacemiT K3 and the C920v2 core of the Sophon SG2044, reveal substantial performance improvements of juFFTe (https://github.com/FZJ-JSC/juFFTe) over the widely used FFTW3 library. Although RVV-enabled platforms show promising results at this stage of development, a comparison with AMD's Zen 5 architecture indicates that RISC-V needs further maturing to reach the performance of established micro-architectures.

Comment
Accepted for International workshop on RISC-V for HPC at ISC26

Closest papers

Nearest neighbours by meaning across the whole index.

Great Expectations: Benchmarking the Real-World Performance of RVV 1.0 in HPC

cs.DC cs.ARcs.ET ·2026-08-28 ·Stepan Nassyr, Prateek Chawla, Daniel Seibel, Jayesh Badwaik, Kaveh Haghighi Mood +1 more
similarity 0.71
Abstract · Accepted for International workshop on RISC-V for HPC at ISC26

Following the ratification of the RISC-V Vector Extension (RVV 1.0), new commercially available silicon has been adopting the extension. This paper revisits the question of RISC-V viability for High-Performance-Computing (HPC) by benchmarking the latest RVV 1.0-capable hardware (SiFive X280 (Tenstorrent Blackhole), SpacemiT X60 (K1) and X100/A100 (K3), and T-Head C920v2 (Sophon SG2044)). We assess these platforms using standard HPC benchmarks (BLAS, FFTW, HPL, HPCG) and synthetic workloads (STREAM, FMA throughput) and compare them to a state-of-the-art HPC ARM64 chip (NVIDIA Grace). Our findings show that while RVV 1.0 delivers significant performance improvements over scalar execution, hardware-specific implementation challenges remain. We detail these performance characteristics and discuss the remaining hurdles for RISC-V, including RVV, to become a mainstay in the HPC landscape.

0.44

Investigating ET-SoC-1 Vector and Parallel Performance with sGEMM

cs.DC ·2026-10-31 ·Richard Neale, Nick Brown
publishedbenchmark similarity 0.63
Abstract · Author accepted version of paper published in RISC-V for HPC workshop at SC26

The Ainekko (formerly Esperanto) ET-SoC-1 is a massively parallel RISC-V accelerator. Its compute array comprises 1024 dual-threaded in-order ET-Minion cores (2048 harts) operating at 600 MHz, each core providing an eight-lane 256-bit packed-single (PS) SIMD datapath shared by its two harts, with access to LPDDR4X memory at a nominal 133 GiB/s. This paper presents a performance investigation using single-precision general matrix multiplication (sGEMM) as the benchmark kernel. Two device kernels are implemented and evaluated on the ET-SoC-1, these are a register-blocked PS SIMD baseline with two-step software pipelining, and a TensorFMA32 kernel that drives the same FMA datapath through the per-core tensor micro-operation sequencer, with double-buffered A scratchpad loading. Because both kernels are bounded by the same arithmetic peak, the comparison isolates the effect of operand delivery from that of arithmetic width. Performance is compared against CPU references (SpacemiT K3, Intel i5-11600, AMD Ryzen 9 9950X and the Arm Cortex-X925/A725 CPU of an NVIDIA DGX Spark) and two GPUs (NVIDIA GB10 Blackwell and AMD RDNA4 RX 9060 XT).

0.36

Minimum RISC-V: Maximum FPGA Efficiency

cs.AR ·2026-10-15 ·Martin Langhammer, Bogdan Pasca, Gregg Baeckler
published similarity 0.58
Abstract

RISC-V processors are now widely available for FPGAs, with most FPGA vendors replacing their proprietary soft-CPU architectures with this instruction-set architecture (ISA). Although contemporary FPGAs are increasingly resource- and feature-rich, a soft processor system---including memory---often occupies a disproportionately large footprint and delivers only modest performance relative to the potential of the target device. In this work we first design a lightweight but deeply pipelined RISC-V core that can run above 700 MHz in a mid-range device and that is capable of retiring one instruction per clock under ideal conditions. We then develop and demonstrate a new optimization method that compiles the final application binary and a specialized processor instance contemporaneously. The method expands each instruction into an application-specific encoding, removes unused datapath and decode logic during synthesis, and yields cores that remain assembler-compatible with the original program while no longer being binary-compatible with a general-purpose RISC-V. We implement example designs on RV32I (base integer), RV32M (integer multiply), and RV32F (single-precision floating-point) configurations. Our optimized RISC-V is as small as 170 ALMs and closes timing at 775 MHz in an Altera Agilex-5 device. Finally, we show that these processors can be packed into a deterministic area and stepped-and-repeated continuously without material impact on performance, enabling predictable multi-core density planning.

0.35

Beyond Compression Ratio: High-Throughput KV Compression for Disaggregated LLM Serving

cs.DC ·2026-11-03 ·Junhong Wu, Zedong Liu, Xinyang Ma, Yuhan Chen, Guangming Tan +1 more
published similarity 0.58
Abstract · Accepted by The 22nd Annual IFIP International Conference on Network and Parallel Computing (NPC 2026)

KV cache compression reduces the communication volume of disaggregated large language model serving, but its practical benefit depends not only on compression ratio and model quality, but also on how efficiently the compression pipeline executes. This requirement becomes increasingly important as modern serving systems adopt high-bandwidth interconnects, where inefficient compression can offset a substantial portion of the saved communication time. This paper presents FastKVComp, a high-throughput KV cache compression data path built on top of KVServe. FastKVComp improves compression execution in two complementary ways. First, it fuses the distribution transformation and low-bit quantization stages into a KVaware TileLang kernel, eliminating intermediate tensor materialization and redundant memory accesses. Second, it replaces the original lossless compression backend with an open, extensible, and searchable backend based on LC, enabling high-performance compression operator pipelines. The fused kernel achieves up to 5.9x speedup, while the new lossless backend increases compression throughput from below 90 GB/s to over 500 GB/s. Across the evaluated workloads, FastKVComp reduces job completion time by up to 2.04x. End-to-end evaluation shows that these optimizations allow KV compression to retain meaningful communication benefits under modern high-bandwidth network.

0.27

SVRF: Efficient Register Storage for Long-Vector Architectures

cs.AR ·2026-10-05 ·Francesco Minervini, Lorenzo Deltetto, Osman Unsal, Adrian Cristal
similarity 0.57
Abstract

Vector processors exploit data-level parallelism to provide high computational throughput, but very long vectors can make the Vector Register File (VRF) a significant source of area, energy, and register pressure. This cost is exacerbated when vector instructions operate on values with scalar semantics: although such values are architecturally represented using vector registers, they do not require full-width storage. This paper proposes the Scalarized Vector Register File (SVRF), a microarchitectural enhancement that redirects scalar-semantics vector values to a dedicated scalar register file, avoiding unnecessary allocation and access of full-width physical vector registers. The SVRF integrates with vector register renaming while preserving compatibility with the supported vector ISA. We implement and evaluate SVRF in an Register Transfer Level (RTL)-based RISC-V Vector Extension (RVV)-compliant vector processing unit supporting very long vectors. Across representative HPC and AI/ML workloads, the SVRF reduces vector-register pressure and VRF activity without degrading performance. By exploiting the resulting reduction in VRF demand, the proposed design achieves up to 15.8% VRF area reduction and up to 6% total area reduction, while reducing total power by up to 12% in evaluated configurations. Some workloads also achieve up to 1.12X speedup.

0.15

Porting and Benchmarking Chapel on Emerging RISC-V Hardware: An HPC Viability Study

cs.DC cs.ET ·2026-08-14 ·Ian Henriksen, Chris Taylor, Patrick Diehl, Jade Abraham, Palmer Cox +2 more
benchmark similarity 0.57
Abstract

The Chapel programming language recently added support for the RISC-V architecture. Here we discuss what changes were needed for Chapel to work on RISC-V as well as lessons learned from the porting process. We use some of Chapel's extensive benchmark suite to gain further insight into the suitability of the RISC-V architecture for future HPC use. We compare performance on SiFive P550 and Unmatched boards and a Sophon SG2042 with a variety of other recent HPC CPU platforms. Various portability and performance anomalies arose on different architectures and are discussed. While the RISC-V machines represent smaller preliminary offerings and not HPC-class hardware, these results still provide hope that RISC-V hardware can become viable for HPC in the near future.

0.04

Rethinking Sparse Formats for RISC-V: A Hierarchical Approach to High-Performance SpMV

cs.DC cs.PF ·2026-09-10 ·Anna Pirova, Anastasia Vodeneeva, Konstantin Kovalev, Alexander Ustinov, Maksim Zagriadskov +5 more
code/data similarity 0.57
Abstract

The sparse matrix-vector multiplication (SpMV) algorithm is a fundamental computational kernel of linear algebra and serves as a building block for numerous applications, primarily iterative solvers for systems of linear equations used in scientific and engineering simulations. This paper compares vectorized implementations of the SpMV algorithm across eight established sparse matrix storage formats and proposes a novel modification of the CSR format, Hierarchical CSR (HCSR), which enhances SpMV performance on RISC-V processors. Our SpMV implementations utilize RVV 1.0 intrinsics and are publicly available as an open-source C++ library named RVVLASparse. Computational experiments conducted on SpacemiT K1 and K3 RISC-V boards demonstrate that the proposed HCSR format achieves the shortest execution time among all considered formats across a broad class of sparse matrices. HCSR outperforms the best CSR implementation on 8 cores, yielding an average speedup for double precision of 19% on K1 (13% on K3) and for single precision of 36% on K1 (34% on K3).

0.35

Silent Degradation during Auto-Vectorization of bf16/fp16 on RISC-V Under LLVM

cs.PL ·2026-11-02 ·Vaishnavi Kouru, Robert Chun
hot direction similarity 0.55
Abstract

Low-precision numeric types such as 8-bit integers, bfloat16, and half-precision floating point (fp16) are often used in AI inference workloads to reduce memory bandwidth, and RISC-V's openly specified Vector extension (RVV) is a natural target for compiling such workloads with auto-vectorization. This paper examines whether LLVM's RISC-V auto-vectorizer handles these narrow types equally well, using a multiply-accumulate loop written for fp32, int8, bf16, and fp16. Under a common baseline target (-march=rv64gcv), int8 and fp32 vectorize cleanly, while bf16 and fp16 degrade to increasingly scalar-heavy fallback code, with fp16 falling back to per-element software conversion calls, unless additional target-feature extensions (zvfbfmin/zvfbfwma, zvfhmin) are enabled. Under QEMU user-mode emulation, the baseline bf16 and fp16 kernels execute $17.0\times$ and $75.9\times$ as many dynamic instructions as their extension-enabled counterparts. Compiler diagnostics do report this degradation, but do not distinguish, in their wording, between a limitation that a compiler flag resolves entirely and one reflecting an inherent conversion cost, leaving no direct signal toward the fix. These results are supported by assembly-level instruction analysis, by direct inspection of LLVM's optimization remarks, and by dynamic instruction counts collected under emulation.

0.34