CS Paper Radar

Great Expectations: Benchmarking the Real-World Performance of RVV 1.0 in HPC

Stepan Nassyr, Prateek Chawla, Daniel Seibel, Jayesh Badwaik, Kaveh Haghighi Mood, Andreas Herten

cs.DC cs.ARcs.ET ·submitted 2026-08-28 09:02 UTC · v1

Abstract

Following the ratification of the RISC-V Vector Extension (RVV 1.0), new commercially available silicon has been adopting the extension. This paper revisits the question of RISC-V viability for High-Performance-Computing (HPC) by benchmarking the latest RVV 1.0-capable hardware (SiFive X280 (Tenstorrent Blackhole), SpacemiT X60 (K1) and X100/A100 (K3), and T-Head C920v2 (Sophon SG2044)). We assess these platforms using standard HPC benchmarks (BLAS, FFTW, HPL, HPCG) and synthetic workloads (STREAM, FMA throughput) and compare them to a state-of-the-art HPC ARM64 chip (NVIDIA Grace). Our findings show that while RVV 1.0 delivers significant performance improvements over scalar execution, hardware-specific implementation challenges remain. We detail these performance characteristics and discuss the remaining hurdles for RISC-V, including RVV, to become a mainstay in the HPC landscape.

Comment
Accepted for International workshop on RISC-V for HPC at ISC26

Closest papers

Nearest neighbours by meaning across the whole index.

Toward Open ISA Supercomputing: A Comparative Study of RISC-V, Arm, and x86 Architectures on HPC Workloads

cs.DC cs.ARcs.PF ·2026-10-23 ·Emanuele Venieri, Giacomo Madella, Gabriele Ceccolini, Simone Manoni, Federico Ficarelli +7 more
code/data similarity 0.73
Abstract · Preprint submitted to Future Generation Computer Systems

RISC-V is emerging as a candidate architecture for high-performance computing (HPC), but its competitiveness against established x86 and Arm processors remains difficult to assess because existing studies use different platforms, workloads, and methodologies, and rarely consider energy efficiency. Our work provides an evaluation of contemporary HPC RISC-V, Arm, and x86 processors using a common software stack and methodology. We characterize the Sophgo SG2044 and compare it with the NVIDIA Grace CPU Superchip and Intel Xeon Platinum 8480+ across four HPC benchmarks (STREAM, HPL, HPL-MxP, and HPCG) and four representative applications (iPIC3D, PLUTO, OpenFOAM, and llama$.$cpp). The version of HPL-MxP linked to OpenBLAS built and used for this work is made available as open-source software. The SG2044 reaches 8.02 GFLOP/s of FP64 performance and 7.8 GB/s of memory bandwidth per core, increasing to 294 GFLOP/s and 107 GB/s at 64 cores. L2-cache-aware process placement enables near-linear scaling up to 16 cores, beyond which memory-bandwidth saturation limits further gains. Across generations of RISC-V hardware, in the context of the Monte Cimone (MC) project, the SG2044-based MCv3 doubles both single-core performance and peak memory bandwidth relative to MCv2, while improving memory bandwidth, node-level FP64 performance, and energy efficiency by approximately 100x, 158x, and 10x, over MCv1. Against the Arm and x86 systems, the SG2044 shows 8-15x less absolute performance, reflecting its narrower vector resources and less advanced technology node, but delivers competitive scaling and energy efficiency on several workloads. Its most notable result is LLM decode, where 64-core execution provides the highest relative scaling and energy efficiency among the evaluated platforms while exceeding Intel in throughput. Our results show that RISC-V processors are closing the gap with the competition.

0.23

Porting and Benchmarking Chapel on Emerging RISC-V Hardware: An HPC Viability Study

cs.DC cs.ET ·2026-08-14 ·Ian Henriksen, Chris Taylor, Patrick Diehl, Jade Abraham, Palmer Cox +2 more
benchmark similarity 0.72
Abstract

The Chapel programming language recently added support for the RISC-V architecture. Here we discuss what changes were needed for Chapel to work on RISC-V as well as lessons learned from the porting process. We use some of Chapel's extensive benchmark suite to gain further insight into the suitability of the RISC-V architecture for future HPC use. We compare performance on SiFive P550 and Unmatched boards and a Sophon SG2042 with a variety of other recent HPC CPU platforms. Various portability and performance anomalies arose on different architectures and are discussed. While the RISC-V machines represent smaller preliminary offerings and not HPC-class hardware, these results still provide hope that RISC-V hardware can become viable for HPC in the near future.

0.04

Performance Evaluation of Fast Fourier Transforms on Emerging RISC-V Hardware with Vector Extension Support

cs.MS cs.DCmath.NA ·2026-08-28 ·Daniel Seibel, Kaveh Haghighi Mood, Jayesh Badwaik, Prateek Chawla, Stepan Nassyr +1 more
code/data similarity 0.71
Abstract · Accepted for International workshop on RISC-V for HPC at ISC26

This manuscript presents a performance evaluation of Fast Fourier Transform (FFT) implementations on emerging processors supporting the RISC-V Vector Extension (RVV 1.0). By introducing juFFTe, a light-weight high-performance library for discrete Fourier transforms, it is demonstrated how effective vectorization of performance-critical FFT kernels can be achieved on RVV-enabled hardware. Comprehensive benchmarks on three RVV 1.0-ready processors, the SiFive X280, the X100 core of the SpacemiT K3 and the C920v2 core of the Sophon SG2044, reveal substantial performance improvements of juFFTe (https://github.com/FZJ-JSC/juFFTe) over the widely used FFTW3 library. Although RVV-enabled platforms show promising results at this stage of development, a comparison with AMD's Zen 5 architecture indicates that RISC-V needs further maturing to reach the performance of established micro-architectures.

0.64

NVIDIA Vera: A Microarchitecture-Level Comparison with Grace, Turin, and Granite Rapids

cs.DC cs.ARcs.PF ·2026-11-11 ·Joseph Moore, Thomas Green, Simon McIntosh-Smith
published similarity 0.68
Abstract · Accepted at PMBS26 (SC26 Workshops). 9 pages + 3-page artifact description, 11 figures, 1 table. Corrects a typo in Sec. IV-B relative to th…

The majority of new HPC systems are centered around NVIDIA, AMD, or Intel CPUs. Vera is NVIDIA's latest data-center CPU, including its first custom data-center core design, Olympus. This paper investigates Vera in comparison to AMD Turin and Intel Granite Rapids, using NVIDIA Grace as a baseline. We navigate up the performance ladder, from microbenchmarks that isolate performance metrics, through NAS kernels and miniapps, to single-socket performance of a range of scientific codes. We find that Vera achieves the best performance of the architectures evaluated in most codes tested, and that this gain is primarily attributed to its high memory bandwidth, effective Spatial Multithreading implementation, and low-latency memory subsystem aided by the architecture's predictive structures. While Vera represents a major leap over its predecessor, we show that its comparatively modest floating-point performance trails Intel and AMD in a small number of compute-bound workloads reflecting NVIDIA's GPU focus for such workloads.

0.43

SVRF: Efficient Register Storage for Long-Vector Architectures

cs.AR ·2026-10-05 ·Francesco Minervini, Lorenzo Deltetto, Osman Unsal, Adrian Cristal
similarity 0.64
Abstract

Vector processors exploit data-level parallelism to provide high computational throughput, but very long vectors can make the Vector Register File (VRF) a significant source of area, energy, and register pressure. This cost is exacerbated when vector instructions operate on values with scalar semantics: although such values are architecturally represented using vector registers, they do not require full-width storage. This paper proposes the Scalarized Vector Register File (SVRF), a microarchitectural enhancement that redirects scalar-semantics vector values to a dedicated scalar register file, avoiding unnecessary allocation and access of full-width physical vector registers. The SVRF integrates with vector register renaming while preserving compatibility with the supported vector ISA. We implement and evaluate SVRF in an Register Transfer Level (RTL)-based RISC-V Vector Extension (RVV)-compliant vector processing unit supporting very long vectors. Across representative HPC and AI/ML workloads, the SVRF reduces vector-register pressure and VRF activity without degrading performance. By exploiting the resulting reduction in VRF demand, the proposed design achieves up to 15.8% VRF area reduction and up to 6% total area reduction, while reducing total power by up to 12% in evaluated configurations. Some workloads also achieve up to 1.12X speedup.

0.15

Minimum RISC-V: Maximum FPGA Efficiency

cs.AR ·2026-10-15 ·Martin Langhammer, Bogdan Pasca, Gregg Baeckler
published similarity 0.62
Abstract

RISC-V processors are now widely available for FPGAs, with most FPGA vendors replacing their proprietary soft-CPU architectures with this instruction-set architecture (ISA). Although contemporary FPGAs are increasingly resource- and feature-rich, a soft processor system---including memory---often occupies a disproportionately large footprint and delivers only modest performance relative to the potential of the target device. In this work we first design a lightweight but deeply pipelined RISC-V core that can run above 700 MHz in a mid-range device and that is capable of retiring one instruction per clock under ideal conditions. We then develop and demonstrate a new optimization method that compiles the final application binary and a specialized processor instance contemporaneously. The method expands each instruction into an application-specific encoding, removes unused datapath and decode logic during synthesis, and yields cores that remain assembler-compatible with the original program while no longer being binary-compatible with a general-purpose RISC-V. We implement example designs on RV32I (base integer), RV32M (integer multiply), and RV32F (single-precision floating-point) configurations. Our optimized RISC-V is as small as 170 ALMs and closes timing at 775 MHz in an Altera Agilex-5 device. Finally, we show that these processors can be packed into a deterministic area and stepped-and-repeated continuously without material impact on performance, enabling predictable multi-core density planning.

0.35

Investigating ET-SoC-1 Vector and Parallel Performance with sGEMM

cs.DC ·2026-10-31 ·Richard Neale, Nick Brown
publishedbenchmark similarity 0.61
Abstract · Author accepted version of paper published in RISC-V for HPC workshop at SC26

The Ainekko (formerly Esperanto) ET-SoC-1 is a massively parallel RISC-V accelerator. Its compute array comprises 1024 dual-threaded in-order ET-Minion cores (2048 harts) operating at 600 MHz, each core providing an eight-lane 256-bit packed-single (PS) SIMD datapath shared by its two harts, with access to LPDDR4X memory at a nominal 133 GiB/s. This paper presents a performance investigation using single-precision general matrix multiplication (sGEMM) as the benchmark kernel. Two device kernels are implemented and evaluated on the ET-SoC-1, these are a register-blocked PS SIMD baseline with two-step software pipelining, and a TensorFMA32 kernel that drives the same FMA datapath through the per-core tensor micro-operation sequencer, with double-buffered A scratchpad loading. Because both kernels are bounded by the same arithmetic peak, the comparison isolates the effect of operand delivery from that of arithmetic width. Performance is compared against CPU references (SpacemiT K3, Intel i5-11600, AMD Ryzen 9 9950X and the Arm Cortex-X925/A725 CPU of an NVIDIA DGX Spark) and two GPUs (NVIDIA GB10 Blackwell and AMD RDNA4 RX 9060 XT).

0.36

Compiler and Hardware Co-Design for Accelerator Architectures

cs.AR ·2026-09-24 ·Karl Herman Krause, Emad Jacob Maroun, Martin Schoeberl
similarity 0.61
Abstract · 8 pages, 4 figures

Heterogeneous accelerator architectures offer an efficient path to performance for compute-intensive workloads. However, full-stack integration remains difficult. We present EAAC (Extensible Accelerator Architecture), a flexible and extensible compiler and hardware architecture designed to lower the overhead of hardware-compiler co-development for rapid prototyping of hardware accelerators. EAAC targets static data-flow workloads with predictable memory access patterns. By using MLIR, we enable possible integration with a range of different frontends that emit MLIR. And by providing a minimal set of compiler functionality that enable necessary data-orchestration we lower the effort needed to get a simple implementation of a hardware acceleration unit up and running, while providing a relatively blank and un-opinionated starting point for further work. We validate this approach with a prototype GEMM accelerator combining a systolic array unit with an embedded RISC-V core, compiled end-to-end through the EAAC MLIR pipeline. On a synthetic fully-connected-layer workload, the accelerator achieves a 28x speedup in execution time over a RISC-V-only baseline, with the GEMM operation itself accounting for only 1.64\% of total execution time. We further characterize the compiler's hardware-semaphore allocation, showing that the number of semaphores required scales linearly with instruction count in the worst case, and identify this as a concrete target for future optimization.

0.23