CS Paper Radar

Systematic Lightweight Method for Robotics Based on Strain Energy Distribution Optimization

Jingchen Li

cs.RO ·submitted 2026-08-29 08:45 UTC · v1

Abstract

Service robots work with people and are highly expected to be lightweight for safety, agility and energy conservation. As a complex mechanical system, a robot consists of a large number of components and has various working configurations and load environments. An effective method for achieving system-level optimal robot design is a crucial requirement, but it poses significant challenges. In this study, we introduce a novel approach to optimize the distribution of strain energy, which can significantly improve the effectiveness of systematic optimization in a complex system. First, we present and demonstrate that the strain energy per unit mass should be uniformly distributed in an optimal lightweight mechanical system. Based on this criterion, the system-level problem can be decoupled and the design objective of each part can be assigned based on the strain energy. Then, each part can be optimally designed separately according to its specific circumstances by using different approaches, such as size optimization, topological optimization, and material optimization. In this way, the optimization is at the system level, while the computational complexity is at the part level. Weight reduction and improvements in mechanical properties can be obtained simultaneously. As an example, this method is applied to an arbitrarily designed robotic arm, and its effectiveness is further demonstrated in the cases of lightweight with stiffness improvement, considering multiple materials, multiple working conditions, and vibration performance.

Closest papers

Nearest neighbours by meaning across the whole index.

Task-Oriented Co-Design and Optimization of Geared Actuators for Robotic Applications

cs.RO ·2026-09-19 ·Xuanyu Huang, Jianqiang Dong, Hang Zhao
hot direction similarity 0.59
Abstract

Different tasks performed by legged robots impose distinct torque and speed requirements on actuators. Existing robotic actuators are generally optimized at the component level for metrics such as torque or power density, without explicit task guidance. System-level optimization across components such as motors, gearboxes, and sensors is challenging because of the high computational cost and coupling among mechanical, electrical, and electromagnetic behaviors. Consequently, improvements in individual components may not translate into better robot performance in a specific task. To this end, we present a systematic optimization framework for task-oriented co-design of actuator hardware and control. First, surrogate models are employed to accelerate motor evaluation and support global exploration of the coupled design space. Then, a hierarchical mixed-variable optimization strategy is adopted, combining discrete enumeration with continuous search over dimensions and real-valued indices. These indices are rounded to select admissible values for the remaining discrete choices before each evaluation. Within this search, rated output torque density and task performance are jointly optimized, with Bezier-parameterized joint torque profiles determined for each hardware candidate. Finally, the effectiveness of the proposed framework is validated through actuator fabrication and experiments on a two-degree-of-freedom jumping leg. Based on its measured mass, the fabricated prototype achieves a nominal rated output torque density of 35.7 N m/kg, approximately 60% higher than that of a widely used commercial geared joint actuator, while being 18.6% lighter. Under matched bench conditions, it achieves 12.0% greater jump height at twice-rated torque. Together, these results demonstrate a systematic route from task requirements to actuator design and control.

0.36

Design Optimization for Large High-Force Soft Robot Manipulators Under Gravitational Loads

cs.RO ·2026-08-17 ·Isara Cholaseuk, Penelope Llibre, Alexa Kyriacou, Audrey Wang, Akua K. Dickson +3 more
top venue similarity 0.55
Abstract · 8 pages, 8 figures

Designing large soft robots capable of generating high forces for physical human-robot interaction remains a significant challenge in soft robotics. Prior work in large soft robots has focused on proof-of-concept prototypes, and no systematic framework exists for determining the suitability of a design paradigm for a desired task. This manuscript introduces a method for optimizing the geometry of a soft robot limb, maximizing its blocking force subject to an anti-bucking constraint under its own gravitational loading. We demonstrate that an explicit solution exists to the proposed optimization problem under certain assumptions. Experiments with three geometries of a large, soft, pneumatically-actuated manipulator demonstrate that the method correctly predicts which designs meet constraints and which produces the largest end-effector forces. This method, with its closed-form solution, can allow designers to determine a-priori if an intended class of soft manipulators is an appropriate choice for physical interaction at large size scales.

0.54

Tool-Policy Co-Design for Powder Weighing in Laboratory Automation

cs.RO ·2026-09-30 ·Nikola Radulov, Xin Yang, Kevin S. Luck, Gabriella Pizzuto
similarity 0.53
Abstract · Paper video can be found at https://youtu.be/BEUT70hX9LM

Autonomous powder weighing is one of many bottlenecks in laboratory automation due to the complex, non-linear dynamics of heterogeneous materials. Robot chemists performing this task utilise standard tools shaped for the dexterity of human hands, whose fixed geometry sets the dynamics that the control policy needs to regulate. This work introduces a tool-policy co-design framework that concurrently optimises the morphology of a dispensing tool and its control policy for use by robots in chemistry laboratories, formulated as a bi-level optimisation that minimises dispensing error over a target distribution of powder flowabilities. The outer loop varies tool-design parameters such as tool depth, width and rim spike topology using Bayesian optimisation and hyperband, while an inner loop optimises a control policy for each candidate morphology. We also introduce a geometric similarity metric that warm-starts policy training from cached policies of structurally similar designs, exploring 28% more configurations under the same compute budget. The proposed framework is evaluated on a robotic powder weighing task across seven materials with distinct physical dynamics in a flowability-informed robot-material simulation framework. Experimental results demonstrate that our co-designed tool morphology reduces real-world weighing errors by 45% relative to a standard tool, including on previously unseen materials. These results demonstrate our method can adapt both the control policy and the physical tool to the dynamics of the target material, bringing a new paradigm for material manipulation to the field of laboratory automation.

0.35

Robot Tool Design from Scratch via Behavior-Aware Hierarchical Optimization

cs.RO ·2026-09-28 ·Yinghan Chen, Xiyao Tian, Yizan Dai, Yuyang Li, Yixin Zhu
similarity 0.53
Abstract

The ability to design a tool for a task marks a level of intelligence beyond merely understanding, selecting, or using one. Existing methods for robotic tool design typically optimize a tool's continuous shape and action within a structure that is prescribed or generated beforehand, so the structure itself stays outside the physical optimization loop. We study task-driven tool design from scratch, where tool structure, shape, and action are all derived from the desired physical outcome. Here we show that the three elements can be designed jointly by HOT, a hierarchical optimization whose upper level searches over discrete tool structures with BASS, while lower-level physical optimization evaluates their task behavior and returns milestone progress as behavioral evidence for the search, ultimately providing jointly optimized shape and action. On four tool-use tasks with distinct physical functions, HOT discovers functional structures after evaluating only a small fraction of search spaces containing up to 56 million structures, and the subsequent refinement of their geometry lowers the task loss on all tasks while preserving success, through deformations that are functionally interpretable. Once 3D printed, the tools accomplish all tasks on a real robot with the actions found in simulation. Designing tools from required physical effects, rather than a catalog of known tools, is a step toward the open-ended tool making seen in humans and animals.

0.23

Lego-Like Stiffness Configuration of Planar Compliant Modules for Task-Specific Flexible Interfaces

cs.RO ·2026-10-05 ·Siyue Yao, Xiaochi Xie, Shixuan Zhao, Yutong Li, Hao Li +2 more
similarity 0.53
Abstract · 8 pages, 8 figures

Compliant mechanisms provide compact and intrinsic structural compliance for regulating physical interactions between mechanisms and environments. However, different tasks demand distinct stiffness characteristics, often requiring task-specific optimization and redesign due to limited geometric design space and inherent coupling among multiple stiffness components. This paper presents a Lego-like stiffness configuration approach using stackable planar compliant modules. Three complementary module geometries are introduced, with their stiffness characteristics further regulated through beam width, plate thickness, and module orientation. A unified stiffness model is established for quantitative analysis of individual and composed modules. Further, a two-stage optimization method is presented to achieve desired stiffness profiles, combining a genetic algorithm for configuration and sequential quadratic programming for parameter refinement. Experimental verification shows deviations below 6.5% for simulated stiffness. A flexible wrist is further developed as a representative implementation, exhibiting distinct compliant and dynamic responses under different stiffness characteristics. An optimized modular composition realizes prescribed stiffness values and maintains compliant obstacle interaction during high-speed motion at 1 m/s, with a maximum tested angular compliance of approximately $15^\circ$. The proposed framework provides a systematic approach for constructing flexible interfaces with task-specific stiffness characteristics.

0.23

TO-mdiSPAs: Topology Optimization of multi-directional Soft Pneumatic Actuators

cs.RO ·2026-09-30 ·Swagatam Islam Sarkar, Prabhat Kumar
similarity 0.53
Abstract · 6 pages

Soft pneumatic actuators (SPAs) are highly promising and have been extensively explored within the field of soft robotics. Under pneumatic pressure loads, an SPA undergoes bending deformation to perform specific tasks. A multi- or omni-directional SPA can bend and move in any direction within a 3D space, leveraging its multiple degrees of freedom to realize various mechanical functions. This work presents a systematic methodology using topology optimization (TO) to achieve an optimized design for a multi-directional SPAs. To ensure manufacturing robustness, a three-field TO formulation considering blueprint, dilated, and eroded designs is implemented. Additionally, Darcy's law, incorporating a drainage term, is used to model the design-dependent nature of the pneumatic loading. A min-max optimization problem is formulated based on the target output deformations of the SPA unit and solved using the Method of Moving Asymptotes. The optimization yields a high-performing, unconventional geometric design. Finally, numerical simulations demonstrate that the optimized SPA successfully achieves versatile multi-directional movements.

0.35

Design optimization of tendon-driven robots considering tendon wrapping and shortcut

cs.RO ·2026-10-07 ·Yuta Sahara, Kento Kawaharazuka, Kei Okada
published similarity 0.52
Abstract · Accepted to Advanced Robotics, website: https://haraduka.github.io/opt-wrap-shortcut

This study proposes a multi-objective optimization method for tendon-driven arm design, addressing the inherent trade-off between joint torque and arm thickness through tendon wrapping and shortcut effects. We formulate the problem to simultaneously maximize torque and minimize thickness, solved using NSGA-II. The algorithm optimizes tendon routing, pulley configurations, and attachment points. Results reveal Pareto-optimal designs with effective moment arm expansion via strategic shortcuts, providing practical guidelines for compact high-torque arms. The optimized configurations demonstrate non-trivial patterns beyond conventional design intuition, offering new insights for engineering efficient robotic systems.

0.43

Active 3D weaves for load-bearing and damage-resilient locomotion

cs.RO cond-mat.mtrl-scicond-mat.soft ·2026-09-26 ·Guowei Wayne Tu, Evgueni T. Filipov
similarity 0.52
Abstract

The craft of weaving, where different materials are interlaced, has tremendous potential for creating active and functional systems for use in soft robots, prosthetics, wearables, exoskeletons, and more. These textile-like systems are flexible and safe for human-machine interaction; however, this inherent flexibility limits their ability to carry loads, which is essential for many robotic functions. In this work, we introduce a general framework for integrating active materials into three-dimensional (3D) woven shells to create robotic structures that combine high axial stiffness for load bearing, low bending stiffness for efficient actuation, and system-level resilience for damage tolerance. These woven robots can be modularly assembled from 'woven corners', a fundamental unit of 3D woven structures. We use eigenvalue calculations to identify load bearing and actuation mechanisms of the 3D woven structures, and use that information to make five different robots capable of locomotion. We demonstrate that these 3D woven robots can locomote carrying loads 70 times their self-weight, and can maintain repeatable performance even after being subjected to extreme compression. This work is a pathway toward the design, manufacturing, and simulation of future 3D woven robotic systems where load bearing, high stiffness, active functional deformation, locomotion, and system-level resilience are all needed.

0.22