CS Paper Radar

TO-mdiSPAs: Topology Optimization of multi-directional Soft Pneumatic Actuators

Swagatam Islam Sarkar, Prabhat Kumar

cs.RO ·submitted 2026-09-30 12:31 UTC · v1

Abstract

Soft pneumatic actuators (SPAs) are highly promising and have been extensively explored within the field of soft robotics. Under pneumatic pressure loads, an SPA undergoes bending deformation to perform specific tasks. A multi- or omni-directional SPA can bend and move in any direction within a 3D space, leveraging its multiple degrees of freedom to realize various mechanical functions. This work presents a systematic methodology using topology optimization (TO) to achieve an optimized design for a multi-directional SPAs. To ensure manufacturing robustness, a three-field TO formulation considering blueprint, dilated, and eroded designs is implemented. Additionally, Darcy's law, incorporating a drainage term, is used to model the design-dependent nature of the pneumatic loading. A min-max optimization problem is formulated based on the target output deformations of the SPA unit and solved using the Method of Moving Asymptotes. The optimization yields a high-performing, unconventional geometric design. Finally, numerical simulations demonstrate that the optimized SPA successfully achieves versatile multi-directional movements.

Comment
6 pages

Closest papers

Nearest neighbours by meaning across the whole index.

Towards end-to-end co-design for one-shot printable task-specific soft robots

cs.RO ·2026-11-02 ·James Wood, André Farinha, Will Browne, Josh Pinskier, Krishna Manaswi Digumarti
similarity 0.70
Abstract

Soft robot co-design methods can jointly optimise morphology and control, but the resulting designs are often difficult to manufacture, while manufacturable approaches typically restrict actuator placement or require manual assembly. We present a simulation-based co-design framework that jointly optimises material distribution, pneumatic actuator placement and orientation, and control, while producing designs that can be fabricated monolithically using fused deposition modelling. The framework uses a differentiable 2D plane-stress Material Point Method simulator, incorporating an experimentally validated material model and an empirically derived surrogate model of a 3D-printed inflatable actuator. We demonstrate gradient-based optimisation soft robotic arms for prescribed tip trajectories. Optimised designs are transferred directly from simulation to one-shot monolithic FDM fabrication, with integrated actuators and no post-assembly. Physical experiments demonstrate that the resulting arms reproduce the behaviour predicted in simulation. This framework provides a path from task-level objectives to physically realisable soft robots while retaining substantial freedom over both morphology and actuation.

0.14

Manufacturing Complex Airtight Soft Pneumatic Actuators for Soft Robotics: Process Evaluation and Optimization

cs.RO ·2026-08-13 ·Mohammed Abboodi
published similarity 0.64
Abstract

Manufacturing complex soft pneumatic actuators remains challenging because geometric fidelity, compliance, structural integrity, and airtightness must be achieved simultaneously. This study presents a manufacturing-focused evaluation of several fabrication routes for complex pneumatic structures, including heat-shrink forming, silicone casting, powder- and liquid-based additive manufacturing, and fused deposition modeling (FDM). The processes were assessed through process screening, baseline fabrication, failure analysis, and process improvement to distinguish inherent process limitations from correctable manufacturing defects. Heat-shrink forming was limited by geometric conformity, casting by mold accessibility and bonded interfaces, powder-based methods by residual material trapped within enclosed passages, and digital light processing by the material properties and post-processing requirements of the investigated system. FDM provided the most adaptable route because its dominant defects could be progressively reduced through process optimization. The results further showed that airtightness depends not only on nominal wall thickness but also on extrusion-path architecture, while support-free geometry is important when access for internal post-processing is limited. These findings establish a practical design-for-manufacturing approach in which process selection is guided by the compatibility between actuator architecture and manufacturing constraints. The proposed approach provides practical guidance for developing complex, flexible, and airtight soft pneumatic actuators for soft robotic applications

0.20

PneuGen: Task-Driven Agentic Co-Design of Soft Pneumatic Robots

cs.RO ·2026-11-09 ·Shaohong Zhong, Marco Pontin, Perla Maiolino
similarity 0.63
Abstract

Task-driven design of soft robots requires the consideration of factors such as geometry, morphology, material properties, and actuation, resulting in a large and complex design space that is challenging to explore. Computational optimisation methods leverage signals from simulation to iteratively improve designs to achieve task objectives. However, these methods typically demand high computational load for both optimisation and simulation. We present PneuGen, an agentic co-design framework for soft robots that leverages Large Language Model (LLM) agents to search over the soft robot design space efficiently. A designer agent proposes design programs from a parametric component library, and a separate critic agent analyses simulation diagnostics and recommends targeted revisions. Fitted module response models provide reusable physical priors relating geometry and pressure to deformation. Design programs are automatically validated and converted into finite-element simulations, enabling iterative evaluation. Across grasping tasks on primitive shapes and challenging objects, as well as shape-matching tasks that require multi-directional planar and 3D deformation, the proposed framework significantly outperforms prior computational optimisation baselines. Ablation experiments also highlight the utility of the critic agent and the module response model in facilitating efficient design. We additionally demonstrate the agent-generated soft robot designs in real-world shape-matching and grasping tasks.

0.12

A Comparative Study on Robust Topology Optimization of Design-Dependent Pressure-Actuated Compliant Mechanisms with Quadrilateral Elements

cs.CE ·2026-09-28 ·Swagatam Islam Sarkar, Prabhat Kumar
similarity 0.63
Abstract

This paper presents a comparative study of compliant mechanisms generated using a robust topology optimization technique involving design-dependent pressure loads. Design domains are parameterized using standard and higher-order quadrilateral elements. Both eroded and blueprint configurations are considered. A min-max optimization model combined with an output-spring method is employed to extremize the mechanisms' output displacements. A volume and a strain energy constraint are applied to the blueprint and the eroded designs, respectively. The optimization process is executed using the method of moving asymptotes. Numerical experiments are performed to optimize the pressure-actuated inverter and gripper mechanisms using Q4, Q8, and Q9 elements, and the results are compared. The research highlights how quadrilateral element selection influences both the resulting topologies and performance characteristics.

0.35

An End-to-End Framework for Modelling Pneumatic Soft Robots Based on Differentiable Finite Element Methods

cs.RO eess.SY ·2026-10-03 ·Shaohong Zhong, Yao Yao, Perla Maiolino, Ingmar Posner
top venue similarity 0.60
Abstract · Published in IEEE Robotics and Automation Letters (RA-L)

Soft robots present significant modelling challenges due to their non-linearity, complex dynamics and potentially intricate geometries. These difficulties in accurate system identification and dynamics modelling limit their applications in precise robotics tasks. Prior modelling approaches typically suffer from trade-offs in accuracy, computational efficiency, or speed. The differentiable finite element method (FEM) offers a promising balance between these desiderata for soft robot modelling, and enables the use of gradients for efficient calibration and trajectory optimisation. In this paper, we propose an end-to-end differentiable FEM-based framework designed to streamline modelling and system identification for pneumatic soft robots, enabling the generation of reliable models for downstream tasks. The framework automates the conversion of computer-aided designs into voxelised tetrahedral viscoelastic FEM meshes that accurately represent the robot's geometry and actuation mechanism. By integrating easily acquired point cloud data with differentiable FEM, the framework achieves precise identification of material and dynamic actuation parameters using a minimal experimental setup. Additionally, the differentiable nature of the model facilitates trajectory optimisation by leveraging gradients from robot dynamics and contact interactions. We validate the framework by modelling a complex bellow-shaped pneumatic soft robot and demonstrate its efficacy in real-world motion planning tasks. Experimental results indicate high modelling accuracy, with a maximum positional error of less than 3 mm, and successful application in tasks such as path following and grasping.

0.75

Flap like a bat: Soft pneumatic wings for biomimetic ornithopters

cs.RO ·2026-10-31 ·Besetty Satyanarayana, Sirivelu Akhilesh, Bammidi Abhilash, Prabhat Kumar
similarity 0.58
Abstract · iNaCoMM2025 conference paper

This paper describes the development of a bio-inspired ornithopter wing mechanism that uses soft pneumatic actuators, such as PneuNet structures, in place of revolute joints, inspired by the complicated kinematics of bat flight. The proposed design employs pneumatically driven air pockets within a flexible wing skeleton to achieve smooth, lifelike flapping motion. The actuation system is controlled by 3/2-way solenoid valves and an air pump, which manipulate airflow and actuator deformation. We demonstrate, using ANSYS FEA software, the bending behavior of the PneuNet actuators under varying pressures to inform the wing's structural design. The implementation of soft robotics in the flapping-wing system offers potential advantages over traditional mechanisms, such as reduced mechanical complexity, lower acoustic signatures, enhanced adaptability, and wing morphing. This work demonstrates the feasibility of replacing rigid revolute joints with compliant pneumatic actuators, enabling more agile, silent, and biomimetic aerial robots.

0.32

An open source Python code for three-dimensional topology optimization in single precision on a consumer GPU

cs.CE cs.MS ·2026-11-09 ·Leonilson Toffoli Pedrini, Rodolfo G. M. Andrade, Rafael M. Ferro
code/data similarity 0.57
Abstract · 18 pages, 8 figures. Online Resource 1 is available as an ancillary file. Code and data: https://doi.org/10.5281/zenodo.24050327. Submitted …

Three-dimensional topology optimization solves linear systems with millions of unknowns at every design iteration. Consumer graphics cards run far faster in single than in double precision, and open codes for them mostly address minimum compliance. This educational article presents TOF3D, an open source Python code for density-based topology optimization in single precision on one consumer GPU. It solves four classes of problems: stress constrained minimum compliance, robust minimum compliance against manufacturing errors, compliant mechanisms and bone-like porous infill. The stiffness operator is applied without assembly, and the conjugate gradient method is preconditioned by geometric multigrid. Rounding the element matrix to single precision gave rigid body motions a spurious energy and changed compliances by up to 5.4%. Forming the element products from differences of nodal displacements reduced this error to $1.3\times 10^{-5}$ at no cost in time. Adjoint sensitivities agreed with finite differences to within $1.7\times 10^{-6}$, and the solutions agreed with Ansys Mechanical APDL to within $4.1\times 10^{-10}$ with the same element. On an RTX 3060 with 12 GB, one design iteration of a cantilever took 0.46 s with 0.5 million elements and 15 s with 33.5 million. On the same card and problem, an open GPU code that applies its operator in double precision took 3.7 and 21 s with 0.5 and 4.2 million elements and ran out of memory on larger meshes. Eight cases fixed in a protocol before the runs took 9 to 35 minutes each with 4.2 to 5.2 million elements.

0.49

Design Optimization for Large High-Force Soft Robot Manipulators Under Gravitational Loads

cs.RO ·2026-08-17 ·Isara Cholaseuk, Penelope Llibre, Alexa Kyriacou, Audrey Wang, Akua K. Dickson +3 more
top venue similarity 0.56
Abstract · 8 pages, 8 figures

Designing large soft robots capable of generating high forces for physical human-robot interaction remains a significant challenge in soft robotics. Prior work in large soft robots has focused on proof-of-concept prototypes, and no systematic framework exists for determining the suitability of a design paradigm for a desired task. This manuscript introduces a method for optimizing the geometry of a soft robot limb, maximizing its blocking force subject to an anti-bucking constraint under its own gravitational loading. We demonstrate that an explicit solution exists to the proposed optimization problem under certain assumptions. Experiments with three geometries of a large, soft, pneumatically-actuated manipulator demonstrate that the method correctly predicts which designs meet constraints and which produces the largest end-effector forces. This method, with its closed-form solution, can allow designers to determine a-priori if an intended class of soft manipulators is an appropriate choice for physical interaction at large size scales.

0.54