CS Paper Radar

A Comparative Study on Robust Topology Optimization of Design-Dependent Pressure-Actuated Compliant Mechanisms with Quadrilateral Elements

Swagatam Islam Sarkar, Prabhat Kumar

cs.CE ·submitted 2026-09-28 05:19 UTC · v1

Abstract

This paper presents a comparative study of compliant mechanisms generated using a robust topology optimization technique involving design-dependent pressure loads. Design domains are parameterized using standard and higher-order quadrilateral elements. Both eroded and blueprint configurations are considered. A min-max optimization model combined with an output-spring method is employed to extremize the mechanisms' output displacements. A volume and a strain energy constraint are applied to the blueprint and the eroded designs, respectively. The optimization process is executed using the method of moving asymptotes. Numerical experiments are performed to optimize the pressure-actuated inverter and gripper mechanisms using Q4, Q8, and Q9 elements, and the results are compared. The research highlights how quadrilateral element selection influences both the resulting topologies and performance characteristics.

Closest papers

Nearest neighbours by meaning across the whole index.

TO-mdiSPAs: Topology Optimization of multi-directional Soft Pneumatic Actuators

cs.RO ·2026-09-30 ·Swagatam Islam Sarkar, Prabhat Kumar
similarity 0.63
Abstract · 6 pages

Soft pneumatic actuators (SPAs) are highly promising and have been extensively explored within the field of soft robotics. Under pneumatic pressure loads, an SPA undergoes bending deformation to perform specific tasks. A multi- or omni-directional SPA can bend and move in any direction within a 3D space, leveraging its multiple degrees of freedom to realize various mechanical functions. This work presents a systematic methodology using topology optimization (TO) to achieve an optimized design for a multi-directional SPAs. To ensure manufacturing robustness, a three-field TO formulation considering blueprint, dilated, and eroded designs is implemented. Additionally, Darcy's law, incorporating a drainage term, is used to model the design-dependent nature of the pneumatic loading. A min-max optimization problem is formulated based on the target output deformations of the SPA unit and solved using the Method of Moving Asymptotes. The optimization yields a high-performing, unconventional geometric design. Finally, numerical simulations demonstrate that the optimized SPA successfully achieves versatile multi-directional movements.

0.35

Robust Optimization of Spring Design under Variable Manufacturing Tolerances

cs.NE ·2026-10-03 ·Grzegorz Sroka, Slawomir T. Wierzchon
similarity 0.53
Abstract

A reliable assessment of an optimizer robustness requires tracking controlled changes in parameters to identify sources of algorithmic weakness. Such an approach was applied to the problem of designing tension/compression springs with three continuous variables describing the spring geometry. Three additional independent binary parameters reflect material variability, manufacturing-related geometric deviations, and an additional safety margin. Without expanding the decision space, these parameters can be combined in eight ways to generate variants that allow for direct comparison. In this study we distinguish between robustness effects and the dimension of the problem, which allows tracking changes in feasibility while keeping the nominal mass objective constant. Seven optimization methods and eight hybridized their variants are used for the analysis. The hybridization mechanism applies the operator selected by the prediction procedure presented in Section 3. All methods are evaluated under the same experimental conditions. Each method is run thirty times for each variant, with a maximum of 30000 function evaluations permitted per run. The final quality assessment takes into account the geometry of the feasibility region, search trajectories, performance variations across landscapes and the computational cost of fixed objectives. Together, these factors allow us to determine the quality of the solution, reproducibility, feasibility control, and the effectiveness of optimization. An interesting observation was that hybridization can mitigate cost or feasibility losses associated with a specific configuration. While it compensates for a specific weakness in the underlying mechanism, it does not provide universal resilience.

0.45

Lego-Like Stiffness Configuration of Planar Compliant Modules for Task-Specific Flexible Interfaces

cs.RO ·2026-10-05 ·Siyue Yao, Xiaochi Xie, Shixuan Zhao, Yutong Li, Hao Li +2 more
similarity 0.53
Abstract · 8 pages, 8 figures

Compliant mechanisms provide compact and intrinsic structural compliance for regulating physical interactions between mechanisms and environments. However, different tasks demand distinct stiffness characteristics, often requiring task-specific optimization and redesign due to limited geometric design space and inherent coupling among multiple stiffness components. This paper presents a Lego-like stiffness configuration approach using stackable planar compliant modules. Three complementary module geometries are introduced, with their stiffness characteristics further regulated through beam width, plate thickness, and module orientation. A unified stiffness model is established for quantitative analysis of individual and composed modules. Further, a two-stage optimization method is presented to achieve desired stiffness profiles, combining a genetic algorithm for configuration and sequential quadratic programming for parameter refinement. Experimental verification shows deviations below 6.5% for simulated stiffness. A flexible wrist is further developed as a representative implementation, exhibiting distinct compliant and dynamic responses under different stiffness characteristics. An optimized modular composition realizes prescribed stiffness values and maintains compliant obstacle interaction during high-speed motion at 1 m/s, with a maximum tested angular compliance of approximately $15^\circ$. The proposed framework provides a systematic approach for constructing flexible interfaces with task-specific stiffness characteristics.

0.23

Robot Aware Computational Design of Object Specific Passive Grippers for Additive Manufacturing

cs.RO ·2026-09-03 ·Abdullah Yahya Abdullah Omaisan, Ibrahim Sheikh Mohamed
similarity 0.51
Abstract

This paper presents an end-to-end computational pipeline that converts a selected object mesh, a measured object state, and a selected six-axis robot into an object-specific, unactuated, additively manufacturable gripper. The method couples exact-mesh RGB-D/ICP pose registration, deterministic surface-contact sampling, uncertainty-aware wrench screening, selection among six passive capture mechanisms, object-conformal surface synthesis, full-orientation robot inverse kinematics, a swept-volume-aware manufacturing domain, directional fused-deposition finite-element screening, and constrained three-dimensional SIMP topology optimization. Unlike workflows that treat grasp selection, tool geometry, motion, and structural design as separate problems, every exported design is bound to the source mesh, object pose, robot flange, contact set, and insertion hypothesis by a traceable design identifier. We derive the implemented registration, contact, fit-tolerance, finite-element, and density-optimization equations and prove three properties of the numerical construction: nodal load preservation, monotonic compliance sensitivity under SIMP interpolation, and voxel-domain containment after topology post-processing. Four archived object-specific attempts - a rabbit, camera flange, 3DBenchy, and faceted bust - meet the nominal fit, uncertain-wrench, runtime-sweep, and baseline/post-topology FEA gates. A deliberately enlarged +/-3 mm, +/-5 degree pose stress check differentiates the designs, retaining 29-134 of 160 simulated trials. Their reconstructed topologies retain 92.0-97.6% of the FE domain because functional regions are protected. Archived robot photographs show the corresponding printed assemblies qualitatively, while nominal material properties and absent coupon-calibrated, instrumented tests keep all four at digital-screening status rather than operational release.

0.25

Task-Oriented Co-Design and Optimization of Geared Actuators for Robotic Applications

cs.RO ·2026-09-19 ·Xuanyu Huang, Jianqiang Dong, Hang Zhao
hot direction similarity 0.51
Abstract

Different tasks performed by legged robots impose distinct torque and speed requirements on actuators. Existing robotic actuators are generally optimized at the component level for metrics such as torque or power density, without explicit task guidance. System-level optimization across components such as motors, gearboxes, and sensors is challenging because of the high computational cost and coupling among mechanical, electrical, and electromagnetic behaviors. Consequently, improvements in individual components may not translate into better robot performance in a specific task. To this end, we present a systematic optimization framework for task-oriented co-design of actuator hardware and control. First, surrogate models are employed to accelerate motor evaluation and support global exploration of the coupled design space. Then, a hierarchical mixed-variable optimization strategy is adopted, combining discrete enumeration with continuous search over dimensions and real-valued indices. These indices are rounded to select admissible values for the remaining discrete choices before each evaluation. Within this search, rated output torque density and task performance are jointly optimized, with Bezier-parameterized joint torque profiles determined for each hardware candidate. Finally, the effectiveness of the proposed framework is validated through actuator fabrication and experiments on a two-degree-of-freedom jumping leg. Based on its measured mass, the fabricated prototype achieves a nominal rated output torque density of 35.7 N m/kg, approximately 60% higher than that of a widely used commercial geared joint actuator, while being 18.6% lighter. Under matched bench conditions, it achieves 12.0% greater jump height at twice-rated torque. Together, these results demonstrate a systematic route from task requirements to actuator design and control.

0.36

Topology optimization of force densities for form finding of cable structures

cs.CE math.OC ·2026-08-25 ·Nicolò Pollini
similarity 0.51
Abstract

This paper presents a topology optimization approach for the form finding of cable networks based on the force density method. The proposed framework combines the force density method with topology optimization based on continuous density variables to identify the equilibrated geometry and effective connectivity of cable structures simultaneously. Design variables are assigned to the cable network members and control their force densities through a SIMP interpolation, complemented by an explicit binary promoting term in the objective function. As a result, cable members vanish or remain active throughout the optimization process. The equilibrium configuration is obtained by enforcing the force density method equations, while the objective drives the optimized network as close as possible to a prescribed reference form. Volume constraints, passive boundary regions, and a minimum connectivity requirement at loaded joints are incorporated to yield physically meaningful and numerically stable designs. Several numerical examples based on cable net ground structures defined by horizontal, vertical, and diagonal members are used to study the proposed approach. A dedicated rounding study shows that the relaxed density variables converge to nearly discrete values at the end of the optimization process, with only a minor correction required after thresholding. A study of the volume fraction constraint further shows that reducing the permitted structural volume can trigger a qualitative transition in the optimized topology, from a redundant, densely braced configuration to a minimal load path. Finally, an assessment of solver performance shows that the proposed formulation scales reasonably well with problem size.

0.28

An open source Python code for three-dimensional topology optimization in single precision on a consumer GPU

cs.CE cs.MS ·2026-11-09 ·Leonilson Toffoli Pedrini, Rodolfo G. M. Andrade, Rafael M. Ferro
code/data similarity 0.50
Abstract · 18 pages, 8 figures. Online Resource 1 is available as an ancillary file. Code and data: https://doi.org/10.5281/zenodo.24050327. Submitted …

Three-dimensional topology optimization solves linear systems with millions of unknowns at every design iteration. Consumer graphics cards run far faster in single than in double precision, and open codes for them mostly address minimum compliance. This educational article presents TOF3D, an open source Python code for density-based topology optimization in single precision on one consumer GPU. It solves four classes of problems: stress constrained minimum compliance, robust minimum compliance against manufacturing errors, compliant mechanisms and bone-like porous infill. The stiffness operator is applied without assembly, and the conjugate gradient method is preconditioned by geometric multigrid. Rounding the element matrix to single precision gave rigid body motions a spurious energy and changed compliances by up to 5.4%. Forming the element products from differences of nodal displacements reduced this error to $1.3\times 10^{-5}$ at no cost in time. Adjoint sensitivities agreed with finite differences to within $1.7\times 10^{-6}$, and the solutions agreed with Ansys Mechanical APDL to within $4.1\times 10^{-10}$ with the same element. On an RTX 3060 with 12 GB, one design iteration of a cantilever took 0.46 s with 0.5 million elements and 15 s with 33.5 million. On the same card and problem, an open GPU code that applies its operator in double precision took 3.7 and 21 s with 0.5 and 4.2 million elements and ran out of memory on larger meshes. Eight cases fixed in a protocol before the runs took 9 to 35 minutes each with 4.2 to 5.2 million elements.

0.49

Sensitivity Hot Spot Penalization: A Robust Topology Optimization Framework against First-Order Worst-Case Perturbations

cs.CE ·2026-08-31 ·Junpeng Wang, Niels Aage, Ole Sigmund
similarity 0.50
Abstract

Deterministic topology optimization can efficiently generate high-performance structural designs, but it does not explicitly control localized fragility induced by manufacturing variations and geometric uncertainties. Such fragility often appears as stress concentrations or hinge-like deformation mechanisms. Conventional robust topology optimization can suppress these features, but typically requires multiple design realizations and substantially increased computational cost. Recent work by Sigmund et al. (2026) introduced sensitivity hot spot penalization (SHoSP), which augments the nominal objective by a smooth maximum of its sensitivities and suppresses localized fragile features at low additional cost while promoting more even stress distributions. This paper establishes a general connection between SHoSP and a first-order worst-case robust approximation under a material-mass perturbation budget using a Taylor expansion and H{"o}lder's duality. The original penalty weight is identified as a dimensionless norm-bounded perturbation budget relative to the area (2D) or volume (3D) of the design domain. This interpretation explains the suppression of sensitivity hot spots, hinge localization, and stress concentrations by limiting the maximum first-order degradation under budgeted perturbations. It is investigated for compliance minimization and compliant mechanism design. Robustness is assessed using a relaxed worst-case density perturbation and by comparing deterministic and SHoSP designs under equivalent perturbation budgets. Stress-related effects observed on structured meshes are cross-validated by stress-oriented topology optimization and body-fitted finite element analyses. Extensions to porous infill optimization, multiple load cases, and large-scale 3D examples further demonstrate the applicability and superior scalability of the SHoSP framework.

0.22