CS Paper Radar

Robust Optimization of Spring Design under Variable Manufacturing Tolerances

Grzegorz Sroka, Slawomir T. Wierzchon

cs.NE ·submitted 2026-10-03 17:01 UTC · v1

Abstract

A reliable assessment of an optimizer robustness requires tracking controlled changes in parameters to identify sources of algorithmic weakness. Such an approach was applied to the problem of designing tension/compression springs with three continuous variables describing the spring geometry. Three additional independent binary parameters reflect material variability, manufacturing-related geometric deviations, and an additional safety margin. Without expanding the decision space, these parameters can be combined in eight ways to generate variants that allow for direct comparison. In this study we distinguish between robustness effects and the dimension of the problem, which allows tracking changes in feasibility while keeping the nominal mass objective constant. Seven optimization methods and eight hybridized their variants are used for the analysis. The hybridization mechanism applies the operator selected by the prediction procedure presented in Section 3. All methods are evaluated under the same experimental conditions. Each method is run thirty times for each variant, with a maximum of 30000 function evaluations permitted per run. The final quality assessment takes into account the geometry of the feasibility region, search trajectories, performance variations across landscapes and the computational cost of fixed objectives. Together, these factors allow us to determine the quality of the solution, reproducibility, feasibility control, and the effectiveness of optimization. An interesting observation was that hybridization can mitigate cost or feasibility losses associated with a specific configuration. While it compensates for a specific weakness in the underlying mechanism, it does not provide universal resilience.

Closest papers

Nearest neighbours by meaning across the whole index.

Sensitivity Hot Spot Penalization: A Robust Topology Optimization Framework against First-Order Worst-Case Perturbations

cs.CE ·2026-08-31 ·Junpeng Wang, Niels Aage, Ole Sigmund
similarity 0.56
Abstract

Deterministic topology optimization can efficiently generate high-performance structural designs, but it does not explicitly control localized fragility induced by manufacturing variations and geometric uncertainties. Such fragility often appears as stress concentrations or hinge-like deformation mechanisms. Conventional robust topology optimization can suppress these features, but typically requires multiple design realizations and substantially increased computational cost. Recent work by Sigmund et al. (2026) introduced sensitivity hot spot penalization (SHoSP), which augments the nominal objective by a smooth maximum of its sensitivities and suppresses localized fragile features at low additional cost while promoting more even stress distributions. This paper establishes a general connection between SHoSP and a first-order worst-case robust approximation under a material-mass perturbation budget using a Taylor expansion and H{"o}lder's duality. The original penalty weight is identified as a dimensionless norm-bounded perturbation budget relative to the area (2D) or volume (3D) of the design domain. This interpretation explains the suppression of sensitivity hot spots, hinge localization, and stress concentrations by limiting the maximum first-order degradation under budgeted perturbations. It is investigated for compliance minimization and compliant mechanism design. Robustness is assessed using a relaxed worst-case density perturbation and by comparing deterministic and SHoSP designs under equivalent perturbation budgets. Stress-related effects observed on structured meshes are cross-validated by stress-oriented topology optimization and body-fitted finite element analyses. Extensions to porous infill optimization, multiple load cases, and large-scale 3D examples further demonstrate the applicability and superior scalability of the SHoSP framework.

0.22

GNBG-C: A Unified and Configurable Benchmark Generator for Constrained Continuous Optimization

cs.NE math.OC ·2026-10-27 ·Ali Ghasemzadeh, Erfan Babakhani, Armin Khosravi, Pariya Ghasemzadeh, Yong-Hong Kuo +2 more
benchmark similarity 0.55
Abstract

Many real-world optimization tasks are governed not only by what should be optimized, but also by what is allowed: a solution must first satisfy physical, operational, safety, budgetary, or structural requirements before its objective value becomes meaningful. Yet benchmark design for constrained continuous optimization often treats these restrictions as fixed properties of predefined test instances. Existing generators and benchmark suites provide essential foundations for reproducible comparison, but they either focus primarily on configurable objective landscapes or expose constraint properties within limited, predefined regimes, making it difficult to ask targeted questions about constraint-induced difficulty: whether an optimizer struggles because feasible regions are small, boundaries are restrictive, variables are tightly coupled, or constraint information is poorly scaled. We introduce GNBG-C, a Generalized Numerical Benchmark Generator for Constrained Continuous Optimization. The central idea is to treat the feasible region itself as a configurable object rather than as an inseparable attachment to a fixed test function. By generating controlled constraint regimes around the known GNBG global minimizer, the generator enables systematic studies in which feasibility pressure can be varied while preserving that point as a global minimizer of the constrained problem. This allows researchers to examine how optimizers discover feasibility, handle constraint pressure, and improve objective quality under diverse and controllable feasibility conditions. GNBG-C therefore provides a flexible and auditable framework for probing the strengths and weaknesses of constrained continuous optimizers under targeted forms of feasibility-side difficulty.

0.20

Generative AI-Driven Parametric Design Optimization Framework for Vehicle Closure Systems

cs.LG ·2026-11-16 ·Dongeon Lee, Yurim Lee, Jiyong Kim, Sanghyeon Kim, Sanghyun Lee +3 more
similarity 0.55
Abstract · 26 pages, 15 figures

This study presents a generative AI-driven parametric design optimization framework integrating performance-oriented generation with editable computer-aided design (CAD) and downstream computer-aided engineering (CAE) analysis for industrial vehicle closure systems. The framework is demonstrated on an automotive tailgate assembly with complex geometry, coupled components, and competing performance and feasibility requirements. A production-oriented CATIA model is restructured into a reference-based parametric template with a 13-dimensional design representation. An automated CAD/CAE workflow generates parametric models, performs structural analysis, and constructs a database of mass, maximum displacement, and maximum von Mises stress. Gaussian process regression surrogates predict performance, while diffusion and flow matching models generate design candidates. The design problem minimizes mass and maximum displacement, with stress assessed as an engineering feasibility constraint. Performance-guided generation using surrogate guidance and performance-aware training using a performance-aware loss incorporate engineering objectives, with sensitivity to guidance scale and loss weight evaluated. Generative search is compared with NSGA-II under matched evaluation budgets using a common surrogate model. Selected Pareto-region candidates are reconstructed in CATIA and re-evaluated through native CAE; all verified candidates are successfully regenerated and analyzed. Relative to the baseline, the knee-point design reduces mass by 7.1% and maximum displacement by 29.4%, while extreme verified solutions achieve maximum reductions of 10.3% and 37.3%, respectively. The results demonstrate performance-oriented multi-objective design exploration compatible with editable industrial CAD and native engineering verification.

0.32

Physically Interpretable Basin Selection in Discrete-Variable Origami Design

cs.LG cond-mat.mtrl-scicond-mat.soft ·2026-11-12 ·Lucy Liu, Leon M. Kamp, Katia Bertoldi, L. Mahadevan
similarity 0.54
Abstract

Automatic differentiation has enabled rapid progress on continuous-variable mechanical design problems, but gradient-based optimization still struggles with discrete variables. The standard approach is to optimize using a continuous relaxation of the choices, then commit to the nearest discrete design at the end. Why this procedure selects unfavorable basins is poorly understood. Here, we introduce a practical, interpretable design problem inspired by origami, in which automatic differentiation is used to design shapes with a target functional behavior. Each origami sheet has a fixed geometry, and a bilevel optimization framework tunes which one of four discrete hinge types to place at each fold. Baseline gradient-based design settles into basins with a large discretization gap: relaxed optimization solves 97% of runs, but the final, discrete solutions succeed only half the time. We find that the gap can be relieved with a surprisingly simple modification. An initialization prior uniformly biased toward the stiff, flat hinge option boosts the final solve fraction from 49% to 69%. Applying the prior adds no additional compute and leaves the optimization process unchanged. Compared to the baseline, sheets produced with the prior have greater geometric compatibility and mechanical stiffness. Directly penalizing frustration and floppiness in the outer loss function produces an even greater improvement than the prior does, raising the solve fraction to 78% and indicating that these properties help distinguish the unfavorable basins. Our results demonstrate that loss landscapes for mechanical design can have physically meaningful basins that are not robust to discretization and cause solves to fail. Targeting these basins' physical signatures, even with just an initialization bias, helps avoid them.

0.44

A Comparative Study on Robust Topology Optimization of Design-Dependent Pressure-Actuated Compliant Mechanisms with Quadrilateral Elements

cs.CE ·2026-09-28 ·Swagatam Islam Sarkar, Prabhat Kumar
similarity 0.53
Abstract

This paper presents a comparative study of compliant mechanisms generated using a robust topology optimization technique involving design-dependent pressure loads. Design domains are parameterized using standard and higher-order quadrilateral elements. Both eroded and blueprint configurations are considered. A min-max optimization model combined with an output-spring method is employed to extremize the mechanisms' output displacements. A volume and a strain energy constraint are applied to the blueprint and the eroded designs, respectively. The optimization process is executed using the method of moving asymptotes. Numerical experiments are performed to optimize the pressure-actuated inverter and gripper mechanisms using Q4, Q8, and Q9 elements, and the results are compared. The research highlights how quadrilateral element selection influences both the resulting topologies and performance characteristics.

0.35

TO-mdiSPAs: Topology Optimization of multi-directional Soft Pneumatic Actuators

cs.RO ·2026-09-30 ·Swagatam Islam Sarkar, Prabhat Kumar
similarity 0.52
Abstract · 6 pages

Soft pneumatic actuators (SPAs) are highly promising and have been extensively explored within the field of soft robotics. Under pneumatic pressure loads, an SPA undergoes bending deformation to perform specific tasks. A multi- or omni-directional SPA can bend and move in any direction within a 3D space, leveraging its multiple degrees of freedom to realize various mechanical functions. This work presents a systematic methodology using topology optimization (TO) to achieve an optimized design for a multi-directional SPAs. To ensure manufacturing robustness, a three-field TO formulation considering blueprint, dilated, and eroded designs is implemented. Additionally, Darcy's law, incorporating a drainage term, is used to model the design-dependent nature of the pneumatic loading. A min-max optimization problem is formulated based on the target output deformations of the SPA unit and solved using the Method of Moving Asymptotes. The optimization yields a high-performing, unconventional geometric design. Finally, numerical simulations demonstrate that the optimized SPA successfully achieves versatile multi-directional movements.

0.35

On the Numerical Reliability of Differentiable Physics-Based Optimization for Robotic Material Manipulation

cs.RO cs.LG ·2026-09-28 ·Xintong Yang, Minglun Wei, Yu-Kun Lai, Ze Ji
published similarity 0.51
Abstract · Accepted as an oral presentation at the IROS 2026 workshop: Deformable Objects Manipulation: Research Foundations, Reproducibility and Real-…

Differentiable physics is increasingly used in robotic material manipulation for system identification, trajectory or skill optimization, demonstration generation, and robot or end-effector design. These applications depend on gradients propagated through long, contact-rich simulation rollouts. We study the numerical reliability of those gradients using two Material Point Method (MPM) system-identification benchmarks derived from elastoplastic and granular manipulation. The benchmarks provide controlled cases for three effects that also arise in broader differentiable physics-based optimization. GPU many-to-one sums whose order depends on thread scheduling changed long-horizon gradients and reversed the sign of one parameter gradient relative to a deterministic reference. Finite-difference checks became less reliable for longer rollouts because repeated-run loss variation grew much faster than the loss change produced by the tested parameter perturbations. Observation and loss definitions changed optimization behaviour and the solution preferred by an independent metric. These results motivate reproducible accumulation, finite-difference validation that compares perturbation-induced loss changes with repeated-run variation, and explicit reporting of objective construction when differentiable simulation is used for robotic optimization.

0.28

Hybrid GA/MSDLO Approach to Solve a Greenfield Robotized Machine Tending Layout

cs.CE ·2026-09-29 ·Ramez Awad, Joshua Beck
published similarity 0.51
Abstract · Accepted for publication at "Hybrid GA/MSDLO Approach to Solve a Greenfield Robotized Machine Tending Layout", 19th CIRP Conference on Intel…

Meta-heuristics like genetic algorithms (GAs) effectively explore solution spaces but often yield suboptimal results and are sensitive to parameter tuning. In contrast, the mass-spring-damper layout optimization (MSDLO) method is fast and excels in locally optimizing resource arrangements, though its effectiveness depends on the initial resource placement. This paper first employs genetic algorithms to establish an optimal resource placement in a greenfield layout. We then apply MSDLO to fine-tune the positions and orientations of these resources. The results are presented and discussed, highlighting this approach's practicality in effectively addressing industry needs.

0.43