CS Paper Radar

Topology optimization of force densities for form finding of cable structures

Nicolò Pollini

cs.CE math.OC ·submitted 2026-08-25 07:43 UTC · v1

Abstract

This paper presents a topology optimization approach for the form finding of cable networks based on the force density method. The proposed framework combines the force density method with topology optimization based on continuous density variables to identify the equilibrated geometry and effective connectivity of cable structures simultaneously. Design variables are assigned to the cable network members and control their force densities through a SIMP interpolation, complemented by an explicit binary promoting term in the objective function. As a result, cable members vanish or remain active throughout the optimization process. The equilibrium configuration is obtained by enforcing the force density method equations, while the objective drives the optimized network as close as possible to a prescribed reference form. Volume constraints, passive boundary regions, and a minimum connectivity requirement at loaded joints are incorporated to yield physically meaningful and numerically stable designs. Several numerical examples based on cable net ground structures defined by horizontal, vertical, and diagonal members are used to study the proposed approach. A dedicated rounding study shows that the relaxed density variables converge to nearly discrete values at the end of the optimization process, with only a minor correction required after thresholding. A study of the volume fraction constraint further shows that reducing the permitted structural volume can trigger a qualitative transition in the optimized topology, from a redundant, densely braced configuration to a minimal load path. Finally, an assessment of solver performance shows that the proposed formulation scales reasonably well with problem size.

Closest papers

Nearest neighbours by meaning across the whole index.

HGTO: A Unified Graph-Based Physics-Informed Formulation for Structural Topology Optimization

cs.LG ·2026-09-14 ·Kangzheng Liu, Uday Kumar Punna, Leixin Ma
similarity 0.57
Abstract

Density-based topology optimization is typically structured as a nested sequence of material updates, structural analyses, and sensitivity assessments. While neural density parameterization and dual-field physics-informed approaches provide data-free alternatives, most existing methods represent density and displacement as coordinate fields and make limited use of the discrete relationships inherent in the finite element mesh. The present study introduces HGTO, a unified graph-based formulation that extends complete neural topology optimization from coordinate space to finite-element graph space. Element densities are parameterized on the element graph derived from the mesh, and the structural state is determined on the corresponding node--element hypergraph. Finite element kinematics, numerical quadrature, constitutive response, and force assembly remain explicitly defined operations within the differentiable computation. The material field and equilibrium state are therefore coupled through a common finite-element incidence structure. Numerical studies show compliance comparable to conventional density-based optimization at substantially lower computational cost than a representative coordinate-based dual-field neural method. The same coupled formulation accommodates high-resolution and irregular meshes, three-dimensional structures, finite deformation, and elastoplastic response.

0.46

Topology optimization with buckling constraints: Adaptive eigenvalue aggregation and modality identification

cs.CE ·2026-09-17 ·Badvelu Pranay Prabha, Prabhat Kumar
similarity 0.51
Abstract · 33 pages

This paper presents novel approaches to tackle two key challenges in topology optimization problems with buckling constraints: determining how many eigenvalues to aggregate and identifying the eigenvalue modality at the optimal design. We demonstrate the mathematical inconsistencies that arise when choosing an arbitrary fixed number of eigenvalues for aggregation. Specifically, if the multiplicity of the critical eigenvalues is smaller than the chosen subset size, coalescence with higher-order eigenvalues can occur. Neglecting these during aggregation causes incorrect sensitivities, while simply increasing the preselected eigenvalue count unnecessarily raises computational costs. To resolve this issue, we propose an approach that dynamically determines the exact number of eigenvalues required at each optimization iteration. The proposed approach reduces computation time significantly while maintaining competitive performance relative to the conventional method across the numerical experiments presented. Additionally, accurately predicting modality at the optimal point is crucial for understanding the buckled mode shapes of optimized designs. A new optimization formulation is proposed using the difference between eigenvalues to capture the true eigenvalue modality. This formulation is first validated on a classical 1D clamped column, successfully predicting both the bimodal solution and the optimal eigenvectors. The approach demonstrates that the optimal solutions for the wall reinforcement and shear-loaded hinged plate problems for the given set of parameters are trimodal and tetramodal, respectively.

0.27

Aerial Non-Stop Trajectories Preserving the Equilibrium of Loads Suspended by Variable-Length Cables

eess.SY ·2026-09-11 ·Antonio Franchi, Alberto Landi, Chiara Gabellieri
similarity 0.51
Abstract

This work studies equilibrium-preserving non-stop trajectories of aerial carriers connected to rigid loads by variable-length cables. Internal-force motions vary the cable directions without changing the load wrench, while cable-length actuation shapes the radial realization of the carrier trajectories. We derive an explicit cable-length law for realizing prescribed carrier-position profiles along a fixed direction, with constant altitude as a relevant specialization. Under this constraint, a carrier stops exactly when its cable direction stops changing. This characterization reveals a distinction between unrestricted and level motion: variable cable lengths enable bounded non-stop motion with two carriers, whereas periodic level non-stop motion is obstructed for two carriers and constructively achieved for three or more under explicit geometric and feasibility conditions. Numerical simulations illustrate the constant-altitude construction.

0.25

A Comparative Study on Robust Topology Optimization of Design-Dependent Pressure-Actuated Compliant Mechanisms with Quadrilateral Elements

cs.CE ·2026-09-28 ·Swagatam Islam Sarkar, Prabhat Kumar
similarity 0.51
Abstract

This paper presents a comparative study of compliant mechanisms generated using a robust topology optimization technique involving design-dependent pressure loads. Design domains are parameterized using standard and higher-order quadrilateral elements. Both eroded and blueprint configurations are considered. A min-max optimization model combined with an output-spring method is employed to extremize the mechanisms' output displacements. A volume and a strain energy constraint are applied to the blueprint and the eroded designs, respectively. The optimization process is executed using the method of moving asymptotes. Numerical experiments are performed to optimize the pressure-actuated inverter and gripper mechanisms using Q4, Q8, and Q9 elements, and the results are compared. The research highlights how quadrilateral element selection influences both the resulting topologies and performance characteristics.

0.35

Topology optimization of multimaterial aircraft pylons using generalized shape function approach

cs.CE ·2026-09-23 ·Swagatam Islam Sarkar, Prabhat Kumar
similarity 0.50
Abstract · NCMDAO2026 conference paper

As the primary structural component connecting the engine to the wing or fuselage, an aircraft pylon requires optimized structural efficiency; this paper provides topology optimization of multimaterial pylons using the generalized shape function (gSF) approach. The gSF method uses $n$ natural-coordinate design variables per element to provide optimized designs up to $2^n$ distinct material phases while promoting close to discrete material layouts in conjunction with the density and formulated Heaviside projection filters. Pylon structural compliance is minimized subject to volume constraints. Exploiting the geometric features of a typical pylon structure, multimaterial evolution is performed on a corresponding 2D design domain representing the midplane, with up to 14 candidate materials. The optimized two-dimensional layout is then extruded to achieve the corresponding three-dimensional optimized pylon structure. The Method of Moving Asymptotes is employed to achieve the final design variables. The resulting convergence histories exhibit smooth and stable objective minimization. The results highlight the capability of the multimaterial topology optimization framework to effectively optimized aircraft pylons with multiple candidate materials, without requiring a considerable expansion of the design variable set.

0.33

Multi-Material Topology Optimization for Targeted Structural Dynamic Vibration Attenuation

cs.CE ·2026-10-22 ·Bir Bahadur Chaudhary, Bidhan Pandey, Bin Ouyang, Shiguang Deng
similarity 0.50
Abstract

Resonance-induced excessive vibrations can degrade performance, reduce reliability, and shorten the service life of engineering structures. To reduce the risk of resonance, structural natural frequencies are generally engineered to be shifted away from excitation frequencies. To achieve these frequency shifts, topology optimization provides a systematic approach to tailor structural stiffness and mass as an effective inverse design approach. Multi-material topology optimization exploits the high-dimensional design space of spatially varying material constituents by simultaneously optimizing material selection and spatial distribution over the design domain, offering great flexibility in controlling natural frequencies. This study proposes a multi-material topology optimization that attenuates excessive structural dynamic vibrations in free-vibration scenarios via a novel multivariate weight-based interpolation method. Additionally, to address non-smoothness due to mode switching amid optimization, we employ a bound formulation with an auxiliary scalar design variable to replace the max-min eigenvalue objective with constraints on individual eigenvalues. Furthermore, we study and compare three optimization formulations for multi-material design to attenuate vibrations, including maximizing fundamental eigenfrequency, maximizing the gap between adjacent eigenfrequencies, and excluding frequencies from targeted frequency bands, which are smoothly approximated by a proposed rational polynomial formulation. Numerical examples are presented to demonstrate the effectiveness and applicability of our proposed method.

0.30

Robust topology optimization with non-Gaussian material fields using polygonal finite elements

cs.CE math.NAmath.OCstat.CO+1 ·2026-08-16 ·Nilton Cuellar, Anderson Pereira, Ivan F. M. Menezes, Americo Cunha
published similarity 0.49
Abstract

We present a computational framework for robust topology optimization that integrates polygonal finite-element discretizations, spatially correlated non-Gaussian material modeling, and non-intrusive polynomial-chaos surrogates. Spatial uncertainty in Young's modulus is represented as a homogeneous non-Gaussian random field obtained via a memoryless transformation of a truncated Karhunen-Loève expansion, ensuring physical admissibility through positivity of stiffness while preserving the prescribed autocovariance. Polygonal finite elements provide a stable discretization for density-based optimization on unstructured meshes and mitigate checkerboard artefacts and mesh bias, while the sparse polynomial-chaos expansion enables efficient estimation of low-order statistical moments required by the robust objective at a fraction of the cost of intrusive or Monte Carlo approaches. Numerical studies on a cantilever and a curved beam show that introducing non-Gaussian material variability leads to systematic load-path redistribution and a reallocation of 6-12% of the structural volume, together with a reduction in compliance scatter. The non-intrusive surrogate reproduces intrusive reference results within 3% using an order of magnitude fewer full finite-element analyses. These results demonstrate that the proposed framework offers a physically consistent and computationally efficient route to topology-optimized designs that remain reliable under realistic material uncertainty.

0.27

Machine-learning-assisted multiscale topology optimization of functionally graded superimposed lattice structures

cs.CE ·2026-08-28 ·Prashant Kumar Gupta, Jonathan Stollberg, Dominik Schillinger, Mohammad Ashraf Iqbal
benchmark similarity 0.48
Abstract

Functionally graded lattice structures enable lightweight designs with spatially tunable stiffness and density, but their use in multiscale topology optimization is limited by the cost of repeated computational homogenization. This work presents a machine learning-assisted multiscale optimization framework for regular superimposed lattice structures. The unit cell is formed by combining body-centered cubic, face-centered cubic, and simple cubic lattice components, each controlled by an independent geometric parameter. Offline computational homogenization is used to generate effective stiffness data, which are then used to train a Cholesky-constrained neural network surrogate. This representation reconstructs the homogenized stiffness tensor in a physically admissible form. A separate neural network is trained to predict relative density from Monte Carlo-based density estimates. We incorporate our surrogates into a two-stage topology optimization strategy. First, a macroscale topology is obtained using the solid isotropic material with penalization (SIMP) method. The resulting solid region is then used for microscale lattice optimization, where the local lattice parameters are updated using the method of moving asymptotes (MMA). The trained stiffness and density surrogates replace repeated online homogenization during this stage. The method is demonstrated on a three-dimensional Messerschmitt-Bölkow-Blohm (MBB) beam benchmark, producing spatially varying lattice parameters and relative density fields consistent with compliance minimization under a material constraint.

0.27