CS Paper Radar

Topology optimization of multimaterial aircraft pylons using generalized shape function approach

Swagatam Islam Sarkar, Prabhat Kumar

cs.CE ·submitted 2026-09-23 11:04 UTC · v2

Abstract

As the primary structural component connecting the engine to the wing or fuselage, an aircraft pylon requires optimized structural efficiency; this paper provides topology optimization of multimaterial pylons using the generalized shape function (gSF) approach. The gSF method uses $n$ natural-coordinate design variables per element to provide optimized designs up to $2^n$ distinct material phases while promoting close to discrete material layouts in conjunction with the density and formulated Heaviside projection filters. Pylon structural compliance is minimized subject to volume constraints. Exploiting the geometric features of a typical pylon structure, multimaterial evolution is performed on a corresponding 2D design domain representing the midplane, with up to 14 candidate materials. The optimized two-dimensional layout is then extruded to achieve the corresponding three-dimensional optimized pylon structure. The Method of Moving Asymptotes is employed to achieve the final design variables. The resulting convergence histories exhibit smooth and stable objective minimization. The results highlight the capability of the multimaterial topology optimization framework to effectively optimized aircraft pylons with multiple candidate materials, without requiring a considerable expansion of the design variable set.

Comment
NCMDAO2026 conference paper

Closest papers

Nearest neighbours by meaning across the whole index.

Multimaterial topology optimization using SIMP, DMO and gSF: A comparative study with honeycomb tessellations

cs.CE ·2026-09-22 ·Bhargav kumar Duru, Prabhat Kumar
similarity 0.58
Abstract · NCMDAO2026 conference paper

This paper presents a comparative study of multimaterial topology optimization (MMTO) using the extended SIMP, Discrete Material Optimization (DMO), and generalized shape functions (gSF) approaches. The computational domain is discretized into hexagonal cells. Each cell is connected to its neighbors with edges. This characteristic reduces mesh-related effects on the optimized designs compared with conventional triangular and quadrilateral discretizations. Structural compliance is minimized at the prescribed volume fractions. The method of moving asymptotes is employed to update the design variables. The resulting optimized topologies are compared in terms of material distribution, structural performance, convergence behavior, and the characteristics of the obtained material interfaces. The comparative investigation provides insights into the working principles and performance of the extended SIMP, DMO, and gSF interpolation schemes for MMTO.

0.57

Multi-Material Topology Optimization for Targeted Structural Dynamic Vibration Attenuation

cs.CE ·2026-10-22 ·Bir Bahadur Chaudhary, Bidhan Pandey, Bin Ouyang, Shiguang Deng
similarity 0.53
Abstract

Resonance-induced excessive vibrations can degrade performance, reduce reliability, and shorten the service life of engineering structures. To reduce the risk of resonance, structural natural frequencies are generally engineered to be shifted away from excitation frequencies. To achieve these frequency shifts, topology optimization provides a systematic approach to tailor structural stiffness and mass as an effective inverse design approach. Multi-material topology optimization exploits the high-dimensional design space of spatially varying material constituents by simultaneously optimizing material selection and spatial distribution over the design domain, offering great flexibility in controlling natural frequencies. This study proposes a multi-material topology optimization that attenuates excessive structural dynamic vibrations in free-vibration scenarios via a novel multivariate weight-based interpolation method. Additionally, to address non-smoothness due to mode switching amid optimization, we employ a bound formulation with an auxiliary scalar design variable to replace the max-min eigenvalue objective with constraints on individual eigenvalues. Furthermore, we study and compare three optimization formulations for multi-material design to attenuate vibrations, including maximizing fundamental eigenfrequency, maximizing the gap between adjacent eigenfrequencies, and excluding frequencies from targeted frequency bands, which are smoothly approximated by a proposed rational polynomial formulation. Numerical examples are presented to demonstrate the effectiveness and applicability of our proposed method.

0.30

An open source Python code for three-dimensional topology optimization in single precision on a consumer GPU

cs.CE cs.MS ·2026-11-09 ·Leonilson Toffoli Pedrini, Rodolfo G. M. Andrade, Rafael M. Ferro
code/data similarity 0.52
Abstract · 18 pages, 8 figures. Online Resource 1 is available as an ancillary file. Code and data: https://doi.org/10.5281/zenodo.24050327. Submitted …

Three-dimensional topology optimization solves linear systems with millions of unknowns at every design iteration. Consumer graphics cards run far faster in single than in double precision, and open codes for them mostly address minimum compliance. This educational article presents TOF3D, an open source Python code for density-based topology optimization in single precision on one consumer GPU. It solves four classes of problems: stress constrained minimum compliance, robust minimum compliance against manufacturing errors, compliant mechanisms and bone-like porous infill. The stiffness operator is applied without assembly, and the conjugate gradient method is preconditioned by geometric multigrid. Rounding the element matrix to single precision gave rigid body motions a spurious energy and changed compliances by up to 5.4%. Forming the element products from differences of nodal displacements reduced this error to $1.3\times 10^{-5}$ at no cost in time. Adjoint sensitivities agreed with finite differences to within $1.7\times 10^{-6}$, and the solutions agreed with Ansys Mechanical APDL to within $4.1\times 10^{-10}$ with the same element. On an RTX 3060 with 12 GB, one design iteration of a cantilever took 0.46 s with 0.5 million elements and 15 s with 33.5 million. On the same card and problem, an open GPU code that applies its operator in double precision took 3.7 and 21 s with 0.5 and 4.2 million elements and ran out of memory on larger meshes. Eight cases fixed in a protocol before the runs took 9 to 35 minutes each with 4.2 to 5.2 million elements.

0.49

TO-mdiSPAs: Topology Optimization of multi-directional Soft Pneumatic Actuators

cs.RO ·2026-09-30 ·Swagatam Islam Sarkar, Prabhat Kumar
similarity 0.51
Abstract · 6 pages

Soft pneumatic actuators (SPAs) are highly promising and have been extensively explored within the field of soft robotics. Under pneumatic pressure loads, an SPA undergoes bending deformation to perform specific tasks. A multi- or omni-directional SPA can bend and move in any direction within a 3D space, leveraging its multiple degrees of freedom to realize various mechanical functions. This work presents a systematic methodology using topology optimization (TO) to achieve an optimized design for a multi-directional SPAs. To ensure manufacturing robustness, a three-field TO formulation considering blueprint, dilated, and eroded designs is implemented. Additionally, Darcy's law, incorporating a drainage term, is used to model the design-dependent nature of the pneumatic loading. A min-max optimization problem is formulated based on the target output deformations of the SPA unit and solved using the Method of Moving Asymptotes. The optimization yields a high-performing, unconventional geometric design. Finally, numerical simulations demonstrate that the optimized SPA successfully achieves versatile multi-directional movements.

0.35

Topology optimization of force densities for form finding of cable structures

cs.CE math.OC ·2026-08-25 ·Nicolò Pollini
similarity 0.50
Abstract

This paper presents a topology optimization approach for the form finding of cable networks based on the force density method. The proposed framework combines the force density method with topology optimization based on continuous density variables to identify the equilibrated geometry and effective connectivity of cable structures simultaneously. Design variables are assigned to the cable network members and control their force densities through a SIMP interpolation, complemented by an explicit binary promoting term in the objective function. As a result, cable members vanish or remain active throughout the optimization process. The equilibrium configuration is obtained by enforcing the force density method equations, while the objective drives the optimized network as close as possible to a prescribed reference form. Volume constraints, passive boundary regions, and a minimum connectivity requirement at loaded joints are incorporated to yield physically meaningful and numerically stable designs. Several numerical examples based on cable net ground structures defined by horizontal, vertical, and diagonal members are used to study the proposed approach. A dedicated rounding study shows that the relaxed density variables converge to nearly discrete values at the end of the optimization process, with only a minor correction required after thresholding. A study of the volume fraction constraint further shows that reducing the permitted structural volume can trigger a qualitative transition in the optimized topology, from a redundant, densely braced configuration to a minimal load path. Finally, an assessment of solver performance shows that the proposed formulation scales reasonably well with problem size.

0.28

Lattice Structure Optimization for Additive Manufacturing: Manufacturability-Driven Design and Pareto Front Construction

cs.GR ·2026-09-27 ·Yu Xing, Yang Liu, Lin Lu
published similarity 0.49
Abstract · This manuscript is an English translation of a Chinese article accepted for publication in the Journal of Computer-Aided Design & Computer G…

Lattice metamaterials support lightweight, multifunctional structures, while additive manufacturing (AM) enables complex geometries. Yet multiphysics lattice design faces two challenges: efficiently constructing well-covered multi-objective Pareto fronts under limited budgets, and satisfying manufacturing constraints such as overhangs, enclosed cavities, and restricted powder-removal channels. We propose a manufacturing-constraint-driven method for lattice optimization and Pareto-front construction. Differentiable manufacturing constraints are embedded in inverse-homogenization topology optimization, enabling joint optimization of physical performance and manufacturability. A progressive Pareto-front mechanism uses a density-generation network to learn latent representations of high-quality lattices, interpolates neighboring nondominated representations, and decodes them into initial density fields for subsequent optimization. Newly found nondominated solutions update the network and sample set, progressively expanding the manufacturable set. On 3D periodic unit cells, with 1000 optimization runs, network initialization achieves a 92.60% success rate and 916 manufacturable samples, versus 78.30% and 776 for random initialization. Its Pareto front reaches a hypervolume of 0.0787, compared with 0.0675 for random initialization. The results show that the method efficiently constructs broadly covered manufacturable Pareto fronts for multiple physical properties.

0.38

Efficient Geometry Representation Strategies for the Shape Optimization of Profile Extrusion Dies

cs.GR math.NAmath.OC ·2026-09-23 ·Jana Sasse, Maximilian Esser, Markus Mügge, Stefan Turek
similarity 0.49
Abstract

The design of profile extrusion dies remains a challenging task due to the complex rheological behavior of polymer melts and the geometric intricacies of flow channels. Traditional manual optimization approaches, which rely heavily on human experience, are inefficient and often employ unvalidated heuristics. To address these challenges, we present a deterministic and explainable framework for automatic die design based on adjoint-based shape optimization. This approach enables the computation of sensitivities that directly indicate beneficial modifications to the flow channel geometry. A major difficulty in such optimization processes lies in generating boundary-conforming meshes that evolve consistently with changing geometries. To overcome this issue, we employ non-boundary conforming geometry representation methods that eliminate the need for an explicit surface representation along physical boundaries. A dedicated reconstruction technique is developed to recover accurate sensitivity information at the virtual interface between fluid and solid regions. The proposed algorithm is demonstrated on 3D geometries with varying complexity, including realistic extrusion die flow channels. Several objective functionals relevant to industrial applications, such as flow balance at the outflow, are considered. The results highlight significant improvements in performance metrics while maintaining numerical robustness. This work showcases the potential of adjoint-based techniques for automated die design in a domain still largely governed by manual trial-and-error procedures, establishing a foundation for data-efficient, sustainable manufacturing workflows using computational rheology.

0.25

Example-driven Parametrisations for Bayesian Shape Optimisation

cs.LG ·2026-10-08 ·Gabriel Diaz-Aylwin, Joseph Neighbour, Abiel Malkani Talwar, Rui-Yang Zhang, Henry B. Moss
similarity 0.48
Abstract

Bayesian optimisation is the natural tool for shape design when objectives are expensive and non-differentiable, but it needs a compact yet expressive parameterisation of the search space. Hand-crafting one is a complex endeavour requiring domain expertise, and often yields implicit infeasible regions, artificial bounds, and coupled, unordered coordinates. We instead learn the parameterisation from a collection of existing designs, applying principal component analysis to the deformations between shapes. The result is a linear, interpretable search space in which the number of components explicitly trades expressivity against dimensionality. Across aerofoils, wings, and radio-frequency cavities, spanning 2D geometry to 3D aerodynamics and electromagnetics, we show improved sample efficiency and the ability to explore beyond the confines of hand-crafted baselines.

0.15