CS Paper Radar

Multimaterial topology optimization using SIMP, DMO and gSF: A comparative study with honeycomb tessellations

Bhargav kumar Duru, Prabhat Kumar

cs.CE ·submitted 2026-09-22 10:33 UTC · v2

Abstract

This paper presents a comparative study of multimaterial topology optimization (MMTO) using the extended SIMP, Discrete Material Optimization (DMO), and generalized shape functions (gSF) approaches. The computational domain is discretized into hexagonal cells. Each cell is connected to its neighbors with edges. This characteristic reduces mesh-related effects on the optimized designs compared with conventional triangular and quadrilateral discretizations. Structural compliance is minimized at the prescribed volume fractions. The method of moving asymptotes is employed to update the design variables. The resulting optimized topologies are compared in terms of material distribution, structural performance, convergence behavior, and the characteristics of the obtained material interfaces. The comparative investigation provides insights into the working principles and performance of the extended SIMP, DMO, and gSF interpolation schemes for MMTO.

Comment
NCMDAO2026 conference paper

Closest papers

Nearest neighbours by meaning across the whole index.

Topology optimization of multimaterial aircraft pylons using generalized shape function approach

cs.CE ·2026-09-23 ·Swagatam Islam Sarkar, Prabhat Kumar
similarity 0.58
Abstract · NCMDAO2026 conference paper

As the primary structural component connecting the engine to the wing or fuselage, an aircraft pylon requires optimized structural efficiency; this paper provides topology optimization of multimaterial pylons using the generalized shape function (gSF) approach. The gSF method uses $n$ natural-coordinate design variables per element to provide optimized designs up to $2^n$ distinct material phases while promoting close to discrete material layouts in conjunction with the density and formulated Heaviside projection filters. Pylon structural compliance is minimized subject to volume constraints. Exploiting the geometric features of a typical pylon structure, multimaterial evolution is performed on a corresponding 2D design domain representing the midplane, with up to 14 candidate materials. The optimized two-dimensional layout is then extruded to achieve the corresponding three-dimensional optimized pylon structure. The Method of Moving Asymptotes is employed to achieve the final design variables. The resulting convergence histories exhibit smooth and stable objective minimization. The results highlight the capability of the multimaterial topology optimization framework to effectively optimized aircraft pylons with multiple candidate materials, without requiring a considerable expansion of the design variable set.

0.33

Overlap-free multi-material topology optimization for minimum compliance in two and three dimensions by level-set-based negative-mapping interpolation

cs.CE math.OC ·2026-08-18 ·Dong Wang, Qianglin Ran, Xuanliang Wang, Wei Xiang, Wenming Cheng +1 more
publishedunusual similarity 0.56
Abstract · 39 pages, 16 figures, 11 tables

Gray elements and material overlaps at the interfaces limit density-based multi-material topology optimization. This article extends the level set-based negative-mapping interpolation to the multi-material proportional topology optimization of macro-scale structures in two and three dimensions. An alternating active-phase algorithm decomposes M-phase problems into two-phase sub-problems described by level set functions; an evolutionary strategy removes the need for sentitivity analysis; and the negative-mapping interpolation eliminates the overlaps of the phases in the interface elements. Cantilever and half-MBB beams in two dimensions and a cantilever beam in three dimensions, with three and four material phases, give smooth boundaries, no gray elements and overlap-free designs. The compliance lies below the SIMP value in four of the eight two-dimensional cases and 0.3%, 0.4%, 4.8% and 12.7% above it in the other four. The influence of the material properties, of the interface treatment and of the algorithmic parameters is also examined.

0.43

Robust topology optimization with non-Gaussian material fields using polygonal finite elements

cs.CE math.NAmath.OCstat.CO+1 ·2026-08-16 ·Nilton Cuellar, Anderson Pereira, Ivan F. M. Menezes, Americo Cunha
published similarity 0.53
Abstract

We present a computational framework for robust topology optimization that integrates polygonal finite-element discretizations, spatially correlated non-Gaussian material modeling, and non-intrusive polynomial-chaos surrogates. Spatial uncertainty in Young's modulus is represented as a homogeneous non-Gaussian random field obtained via a memoryless transformation of a truncated Karhunen-Loève expansion, ensuring physical admissibility through positivity of stiffness while preserving the prescribed autocovariance. Polygonal finite elements provide a stable discretization for density-based optimization on unstructured meshes and mitigate checkerboard artefacts and mesh bias, while the sparse polynomial-chaos expansion enables efficient estimation of low-order statistical moments required by the robust objective at a fraction of the cost of intrusive or Monte Carlo approaches. Numerical studies on a cantilever and a curved beam show that introducing non-Gaussian material variability leads to systematic load-path redistribution and a reallocation of 6-12% of the structural volume, together with a reduction in compliance scatter. The non-intrusive surrogate reproduces intrusive reference results within 3% using an order of magnitude fewer full finite-element analyses. These results demonstrate that the proposed framework offers a physically consistent and computationally efficient route to topology-optimized designs that remain reliable under realistic material uncertainty.

0.27

Planar-faced and high-Jacobian two-refinement hexahedral templates

cs.GR cs.CG ·2026-09-13 ·Hua Tong, Yongjie Jessica Zhang
similarity 0.52
Abstract

Automatically generating high-quality conforming hexahedral (hex) meshes from general input boundaries remains a challenging problem, despite the numerical advantages hex elements offer in simulation. Grid-based adaptive refinement, followed by hanging-node removal, is the most robust fully automatic choice. Among two-refinement methods, primal templates have better mesh quality than dual templates but depend on a strong balancing condition that over-refines the grid; neither family guarantees planar quadrilateral (quad) faces. This paper generalizes recent primal three-refinement templates to a two-refinement scheme under a moderate balancing condition, a relaxation of the strong one. 32 special and five fundamental patterns resolve all 144 symmetry-reduced configurations, followed by either a fast greedy algorithm or an integer linear programming (ILP) algorithm that trades extra runtime for a further reduction in element count. The scheme is the first two-refinement method in which all hexes have planar faces, and its meshes feed directly into a recent quality-guaranteed hex mesh reconstruction algorithm. At comparable element counts, it attains a similar Hausdorff ratio (HR) and a higher minimum scaled Jacobian (min SJ) than its three-refinement counterpart.

0.24

Physics-based Sphere Packing for Lagrangian Mesh Morphing

cs.GR cs.AI ·2026-10-06 ·Jiong Lin, Hod Lipson
unusual similarity 0.52
Abstract

This paper studies tetrahedral meshes as the body representation for differentiable simulation and computational design. Fixed-connectivity meshes degrade under large morphs, while remeshing from scratch discards node correspondence. We present JamTet, a physics-based sphere-packing framework for volumetric meshing and morphing. We contribute (i) a GPU-parallel mesher combining octree-hierarchical packing with constrained Delaunay tetrahedralization, producing more uniform element volumes than TetGen and fTetWild; (ii) Lagrangian mesh morphing that preserves interior-node identities by re-equilibrating the same spheres within changing shapes and rebuilding the boundary and connectivity, remaining inversion-free where fixed-connectivity and TetSphere meshes invert; and (iii) a differentiable GPU simulator in JAX, with mass-spring edges and a volumetric Neo-Hookean term, integrated with mesh morphing in a design pipeline. In soft-robot morphology design experiments, interior-node gradients improve swimming fitness by 0.73-1.07 over a matched surface-only variant, while voxelized versions of the same designs yield 32-63% lower fitness. These results establish sphere packing as a practical volumetric mesh representation for gradient-based shape optimization. Code and media: under review.

0.27

Machine-learning-assisted multiscale topology optimization of functionally graded superimposed lattice structures

cs.CE ·2026-08-28 ·Prashant Kumar Gupta, Jonathan Stollberg, Dominik Schillinger, Mohammad Ashraf Iqbal
benchmark similarity 0.52
Abstract

Functionally graded lattice structures enable lightweight designs with spatially tunable stiffness and density, but their use in multiscale topology optimization is limited by the cost of repeated computational homogenization. This work presents a machine learning-assisted multiscale optimization framework for regular superimposed lattice structures. The unit cell is formed by combining body-centered cubic, face-centered cubic, and simple cubic lattice components, each controlled by an independent geometric parameter. Offline computational homogenization is used to generate effective stiffness data, which are then used to train a Cholesky-constrained neural network surrogate. This representation reconstructs the homogenized stiffness tensor in a physically admissible form. A separate neural network is trained to predict relative density from Monte Carlo-based density estimates. We incorporate our surrogates into a two-stage topology optimization strategy. First, a macroscale topology is obtained using the solid isotropic material with penalization (SIMP) method. The resulting solid region is then used for microscale lattice optimization, where the local lattice parameters are updated using the method of moving asymptotes (MMA). The trained stiffness and density surrogates replace repeated online homogenization during this stage. The method is demonstrated on a three-dimensional Messerschmitt-Bölkow-Blohm (MBB) beam benchmark, producing spatially varying lattice parameters and relative density fields consistent with compliance minimization under a material constraint.

0.27

Multi-Material Topology Optimization for Targeted Structural Dynamic Vibration Attenuation

cs.CE ·2026-10-22 ·Bir Bahadur Chaudhary, Bidhan Pandey, Bin Ouyang, Shiguang Deng
similarity 0.51
Abstract

Resonance-induced excessive vibrations can degrade performance, reduce reliability, and shorten the service life of engineering structures. To reduce the risk of resonance, structural natural frequencies are generally engineered to be shifted away from excitation frequencies. To achieve these frequency shifts, topology optimization provides a systematic approach to tailor structural stiffness and mass as an effective inverse design approach. Multi-material topology optimization exploits the high-dimensional design space of spatially varying material constituents by simultaneously optimizing material selection and spatial distribution over the design domain, offering great flexibility in controlling natural frequencies. This study proposes a multi-material topology optimization that attenuates excessive structural dynamic vibrations in free-vibration scenarios via a novel multivariate weight-based interpolation method. Additionally, to address non-smoothness due to mode switching amid optimization, we employ a bound formulation with an auxiliary scalar design variable to replace the max-min eigenvalue objective with constraints on individual eigenvalues. Furthermore, we study and compare three optimization formulations for multi-material design to attenuate vibrations, including maximizing fundamental eigenfrequency, maximizing the gap between adjacent eigenfrequencies, and excluding frequencies from targeted frequency bands, which are smoothly approximated by a proposed rational polynomial formulation. Numerical examples are presented to demonstrate the effectiveness and applicability of our proposed method.

0.30

Lattice Structure Optimization for Additive Manufacturing: Manufacturability-Driven Design and Pareto Front Construction

cs.GR ·2026-09-27 ·Yu Xing, Yang Liu, Lin Lu
published similarity 0.50
Abstract · This manuscript is an English translation of a Chinese article accepted for publication in the Journal of Computer-Aided Design & Computer G…

Lattice metamaterials support lightweight, multifunctional structures, while additive manufacturing (AM) enables complex geometries. Yet multiphysics lattice design faces two challenges: efficiently constructing well-covered multi-objective Pareto fronts under limited budgets, and satisfying manufacturing constraints such as overhangs, enclosed cavities, and restricted powder-removal channels. We propose a manufacturing-constraint-driven method for lattice optimization and Pareto-front construction. Differentiable manufacturing constraints are embedded in inverse-homogenization topology optimization, enabling joint optimization of physical performance and manufacturability. A progressive Pareto-front mechanism uses a density-generation network to learn latent representations of high-quality lattices, interpolates neighboring nondominated representations, and decodes them into initial density fields for subsequent optimization. Newly found nondominated solutions update the network and sample set, progressively expanding the manufacturable set. On 3D periodic unit cells, with 1000 optimization runs, network initialization achieves a 92.60% success rate and 916 manufacturable samples, versus 78.30% and 776 for random initialization. Its Pareto front reaches a hypervolume of 0.0787, compared with 0.0675 for random initialization. The results show that the method efficiently constructs broadly covered manufacturable Pareto fronts for multiple physical properties.

0.38