CS Paper Radar

Rad-R: A Raw-ADC Radar Dataset and Capture-Invariant SSM for Hardware-Fault Diagnosis

Mainak Mallick, Junghwan Yim, Alankrit Gupta, Seung-Kyum Choi

cs.CV ·submitted 2026-08-31 14:48 UTC · v2
benchmarkdatasetunusual

Abstract

Automotive mmWave radar can develop vibration, antenna misalignment, radome blockage, and receive-channel degradation that corrupt the signal before perception begins. Data for these faults are scarce because each condition must be induced and measured on physical hardware. We introduce Rad-R, a raw-ADC dataset captured with a 4-chip 77GHz TI MMWCAS-RF-EVM cascade (192 virtual channels). Unlike existing raw-radar datasets, Rad-R pairs each recording with a controlled hardware fault at a calibrated severity, an independent physical severity measurement, and frame-synchronised IMU, temperature, GPS, and camera streams. Rad-R is a single-session dataset, so our generalisation claims are confined to a controlled cross-severity protocol in which train and test use physically distinct captures. A reproducible benchmark evaluates seven representative vision backbones and the proposed raw-IQ Mamba SSM (RadrNet) under within-clip, chirp-wise anytime, few-shot cross-capture, and controlled cross-severity protocols. Within-clip performance is near-saturated ($>0.98$ macro-F1), whereas cross-severity generalisation remains difficult: the absolute-phase RadrNet-DS falls to $0.49$ macro-F1. RadrNet-DS-CI replaces absolute phase with per-frame-standardised magnitude and relative chirp-to-chirp phase and ranks first on the controlled benchmark ($0.663$ vs. $0.628$ for the strongest RD-CNN; three seeds); the RadrNet family also leads on the anytime and few-shot budgets. A descriptive cross-modal analysis further finds that radar micro-Doppler covaries with independently measured IMU vibration energy (pooled Spearman $ρ=0.41$ across conditions). The complete dataset and code will be released publicly under permissive licences.

Comment
v2: author list updated

Closest papers

Nearest neighbours by meaning across the whole index.

SCORE-LM: State-Space Radar Representations with Language Models for Fault Diagnosis

cs.LG eess.SP ·2026-09-30 ·Mainak Mallick, Seung-Kyum Choi
similarity 0.64
Abstract

Radar hardware faults threaten automated perception, motivating accurate, compact diagnosis and understandable maintenance guidance. We introduce SCORE-LM, which couples a small scatterer-conditioned operator-response encoder (SCORE) to an adapted local language model. SCORE combines self-referenced complex trajectories, physical descriptors, and a selective state-space branch, with source-only self-supervision and directional fault inference. On eight capture-excluded Rad-R fault recordings, it achieves state-of-the-art performance within the evaluated nine-model comparison: 88.39% mean capture recall and 88.20% four-fault macro-F1 at ten frames. Its 39,520 radar inference coefficients are 119.7 times fewer than RadrNet-DS-CI's, while recall is 15.56 percentage points higher than this strongest competitor. In a separate low-label protocol, SCORE reaches 71.58% recall with one labeled source window per class. A nonlinear projector converts four frozen fault similarities into five soft tokens, linking compact diagnosis to class-conditioned maintenance guidance. On 75 development questions covering 24 radar windows, language adaptation raises correct-fault answers from 45 to 62 (60.0% to 82.7%) relative to removing the co-trained adapters, while retaining the same projector. SCORE-LM thus combines a compact radar specialist with a language interface for communicating fault-specific inspection guidance.

0.20

BladeSEI: A Multi-Channel and Multi-Day Dataset for Robust Specific Emitter Identification of Radars

eess.SP ·2026-11-13 ·Ryan White, Robert Jones, Hassan Habib, Matthew A. Ritchie, Victoria Nockles +1 more
similarity 0.59
Abstract · 7 pages, 8 figures

This paper introduces "BladeSEI", a multi-channel receiver, multi-day dataset of radar pulses recorded over-the-air from 12 Software Defined Radios (SDRs) for the purpose of Specific Emitter Identification (SEI). The aim of this dataset is to enable investigation into robust SEI techniques that are able to generalise across different receiver channels and recording sessions. The dataset consists of two waveform types per emitter, a 50 microsecond chirped pulse of 40 MHz bandwidth and a 10 microsecond unmodulated pulse. Pulses are captured simultaneously on four synchronised analogue-to-digital converter (ADC) channels of a multi-channel receiver over three recording sessions on two days: a baseline session, an identical repeat on the following day, and a session in which the emitters were thermally conditioned to alter their operating temperature. Initial results using Principal Component Analysis (PCA), Inception and ResNet based classifiers, trained and tested on a single ADC channel and recording session, show that the BladeRF emitters can be discriminated at high signal-to-noise ratio (SNR), with ResNet achieving a macro-F1 above 0.98 at 25 dB for both waveforms, and performance degrading towards random guessing at 0 dB.

0.24

RaMOD: Moving-Object Detection from Raw mmWave Radar Cubes under Ego Motion

cs.RO cs.CV ·2026-11-09 ·Yuan Fang, Long Zhuang, Lingzi Xing, Xijia Wei, Jingqi Jiang +3 more
similarity 0.58
Abstract

Millimeter-wave (mmWave) radar provides weather-robust sensing and direct Doppler measurements, yet automotive perception pipelines often reduce its output to sparse point clouds or two-dimensional projections, leaving raw range-azimuth-Doppler (RAD) cubes underutilized. Ego motion induces Doppler responses from world-static structures, while Doppler wrapping aliases radial velocities, complicating moving-object detection and velocity estimation. We present RaMOD (Radar-based Moving-Object Detection), a real-time framework for moving-object detection and velocity estimation from raw RAD cubes acquired by a vehicle-mounted single-chip radar. RaMOD explicitly estimates frame-wise ego motion and uses the estimated radar translational velocity to predict the Doppler region of world-static structures and suppress returns within it. It temporally encodes the suppressed cubes into multi-scale features to predict RAD-space boxes with class labels. For each detected object, it predicts radial and forward velocities under raw-Doppler and Doppler-unwrapped hypotheses, together with Doppler-wrapping probabilities. On our BRIDGE-Liv dataset, RaMOD outperforms all compared raw-radar methods across RAD-cube, RA, and RD detection settings, achieving 80.8% cube mAP at IoU 0.30, 15.7 percentage points above the strongest RAD-cube baseline. Velocity MAE is 1.128 m/s, with 99.87% Doppler-wrapping accuracy.

0.17

RadarCom: Unlocking Simultaneous Communication and Sensing on Commodity Automotive mmWave Radars

cs.NI ·2026-10-27 ·Yi Wei, Yue Zhang, Peijun Hou, Qiuyu Liao, Nan Cen
published similarity 0.56
Abstract · Accepted to ACM SenSys 2027. 14 pages

Vehicle-to-vehicle (V2V) communication can improve road safety and traffic efficiency, yet its deployment remains limited by the need for dedicated communication hardware and supporting infrastructure. Meanwhile, production vehicles are already widely equipped with millimeter-wave radars for sensing. To unlock their communication potential, this paper presents RadarCom, a software-defined system that enables direct radar-to-radar communication on unmodified commercial off-the-shelf (COTS) automotive mmWave radars while preserving their native sensing functionality. The key insight is that mutual inter-radar interference, traditionally viewed as harmful, can be repurposed as a communication carrier. Based on this insight, RadarCom introduces slope-mismatch-based discovery, adaptive chirp synchronization, differential coding on range-FFT, and sensing-aware interference suppression to enable simultaneous communication and sensing without hardware modification, waveform redesign, or infrastructure support. We implement RadarCom on TI AWR2243 automotive radars and evaluate it under static, dynamic, and challenging real-world conditions. Results show an average effective data rate of 5.55 kbps with symbol error rates below 1.5%, while maintaining sensing F1 scores of up to 80.5% during concurrent communication. These results demonstrate the feasibility of transforming commodity automotive radars into dual-purpose communication and sensing devices.

0.41

EviScope: Evidence-Conditioned Sampling for Long-Range 3D Detection

cs.CV ·2026-11-18 ·Mingyang Lyu, Yinqian Sun, Gongce Cao, Chujie Tang, Yuhao Zhang +4 more
similarity 0.56
Abstract · 29 pages, including appendices; author metadata simplified; paper content unchanged

Query-based camera-radar detectors choose where and over which frames each object query samples from the query's position or feature. We test whether radar evidence around the query should also set these choices at the 150 m range of MAN TruckScenes, where recall differs across object-level radar-return counts within every range band. EviScope is a minimal test: the current frame's returns form a non-learned bird's-eye evidence field, which each query reads at its decoded centre to scale its radial sampling extent and to weight eight frames. It adds 5,450 parameters (0.009%) to RaCFormer, with no latency increase in our timing. Our module-free recipe exceeds the published TruckScenes mAP (25.9 over seven runs against 24.1), so we measure the module only against its own baseline at matched seeds. The evidence a query reads rises with its object's return count (Spearman 0.51) but captures zero-return objects only in part, and the learned radius tracks it ($ρ\approx-0.91$ in four runs). Over seven four-epoch pairs the module changes NDS by $+0.31\pm0.36$ and mAP by $-0.27\pm0.22$ (mean $\pm$ SE). Against a geometry-only conditioner with the same parameter count, trained at three matched seeds, it is higher by $+1.25\pm0.72$ NDS and $+0.87\pm0.21$ mAP, on mAP in every pair, and the control's mean NDS is near the baseline's. An exploratory far-range gain failed an internally pre-specified held-out test, and large inference-time substitution penalties also occur without query-local evidence: neither learned allocation nor inference-time dependence substitutes for matched end-to-end comparisons.

0.28

Empowering AI towards 6G: Realistic UAV Channel Data Acquisition using Open-Source Solutions

eess.SP ·2026-11-12 ·Qiuheng Zhou, Sergiy Melnyk, Hans D. Schotten, Robert Vilter, Nick Stuckert
publishedbenchmarkcode/datahot direction similarity 0.55
Abstract · 6 pages. Accepted version of a paper presented at the 2026 IEEE 103rd Vehicular Technology Conference (VTC2026-Spring), Nice, France

The "sim-to-real" gap introduced by hardware impairments motivates realistic experimental platforms for AI-native research in Non-Terrestrial Networks (NTN). This paper presents an open-source UAV-to-Ground measurement testbed built on the OpenAirInterface (OAI) stack and commodity Software Defined Radios (SDRs), enabling direct extraction of raw Sub-6 GHz Channel State Information (CSI) synchronized with flight telemetry. Through real-world flight campaigns, we observe a velocity-bandwidth decoupling effect: under unguided, measurement-only ridge extraction, dominant spectral ridges deviate strongly from the theoretical kinematic Doppler trajectory, whereas guided tracking substantially reduces this mismatch. This indicates that Doppler information is present, but not dominant, in the raw observable dynamics of commodity SDR-based measurements. We further benchmark representative deep learning predictors on this hardware-inclusive dataset and show, through a case study, that their behavior differs substantially from idealized expectations. By open-sourcing the testbed and dataset, we provide a realistic foundation for training and evaluating AI models for practical aerial network deployments.

0.76

Learning to Assess Heartbeat Observability for mmWave Heart-Rate Sensing

cs.AI ·2026-10-02 ·Yuxuan Hu, Shilin Shan, Jianfei Yang, Feng Xu
code/data similarity 0.55
Abstract · 19 pages, 11 figures. Project page: https://yuxuanhu9.github.io/HEAR/

Contactless heart-rate sensing with millimeter-wave (mmWave) radar requires assessing whether individual measurements support reliable estimation. We study learning to assess heartbeat observability, defined as the readability of the heartbeat component in an acquired phase spectrum, for selective heart-rate estimation. Coherent superposition of scatterer returns can suppress this component even under similar macroscopic observation geometry, motivating assessment directly from acquired measurements. To obtain training supervision across different observability conditions, we develop a controllable multi-scatterer frequency-modulated continuous-wave (FMCW) simulator. Agreement between the dominant heartbeat-band peak and the known heart rate provides an automatic observability label for each simulated measurement. We propose HEAR (Heartbeat Estimation with Assessed Reliability), a compact dual-task Transformer that jointly predicts an observability score and heart rate. Its input combines spectral magnitudes with frequencies relative to the respiration fundamental, providing context for respiratory harmonics. Trained solely on simulated observations, HEAR transfers zero-shot to two public real-world datasets collected at 60 and 120 GHz from 134 subjects. The same learned score supports selective prediction with both HEAR's own heart-rate head and multiple existing estimators. On the 120 GHz dataset, score-based selection reduces the HR head's mean absolute error from 17.9 BPM at full coverage to 1.6 BPM at 50% coverage. The complete pipeline achieves an end-to-end processing latency of 50.8 ms on an edge device. Project page: https://yuxuanhu9.github.io/HEAR/.

0.38

A Universal Raw-IQ Radar Encoder for Cross-Sensor Human Sensing

cs.CV cs.LG ·2026-11-03 ·Jonas Leo Mueller, Dario Zanca, Sebastian Hoefler, Jan Petermann, Thomas Altstidl +3 more
publishedbenchmarkpositioncode/data similarity 0.54
Abstract · Accepted at the 2027 IEEE/CVF Winter Conference on Applications of Computer Vision (WACV)

Radar-based human sensing typically relies on end-to-end task-specific models trained on hand-chosen signal projections, which generalize poorly across unseen users, tasks, and hardware. We argue that the dominant signal processing choice, the micro-Doppler spectrogram, is a poor starting point for transfer because it keeps the Doppler axis, which carrier frequency rescales, and discards the angular axis, which carrier frequency leaves unchanged. We instead pretrain a convolutional beta-VAE without labels on clutter-removed raw radar measurements from four platforms spanning 60 and 77 GHz and 4 to 12 virtual antennas, aligned by a unified spectral interpolation grid. For every downstream benchmark the encoder stays frozen, and only a small supervised temporal classifier is trained on its embeddings. We compare against supervised models trained end to end on each benchmark and a pretrained radar foundation model across ten settings covering activity, gesture, sign-language, and gait recognition. When the test users and the radar are seen during training, our encoder is best on all five benchmarks. For users never seen in training, it leads on three of four benchmarks, by 4.8 to 23.2 points. On subject-disjoint gait recognition, it is best for each of the four held-out subjects and 8.3 points above the strongest baseline on average, even though its pretraining excluded every recording of this radar. Excluding the test radar from pretraining costs at most 5.3 points on any benchmark. Code is available at https://github.com/jonasmueler/UniversalRadarEncoder_WACV.

0.50