CS Paper Radar

RadarCom: Unlocking Simultaneous Communication and Sensing on Commodity Automotive mmWave Radars

Yi Wei, Yue Zhang, Peijun Hou, Qiuyu Liao, Nan Cen

cs.NI ·submitted 2026-10-27 04:26 UTC · v1
published

Abstract

Vehicle-to-vehicle (V2V) communication can improve road safety and traffic efficiency, yet its deployment remains limited by the need for dedicated communication hardware and supporting infrastructure. Meanwhile, production vehicles are already widely equipped with millimeter-wave radars for sensing. To unlock their communication potential, this paper presents RadarCom, a software-defined system that enables direct radar-to-radar communication on unmodified commercial off-the-shelf (COTS) automotive mmWave radars while preserving their native sensing functionality. The key insight is that mutual inter-radar interference, traditionally viewed as harmful, can be repurposed as a communication carrier. Based on this insight, RadarCom introduces slope-mismatch-based discovery, adaptive chirp synchronization, differential coding on range-FFT, and sensing-aware interference suppression to enable simultaneous communication and sensing without hardware modification, waveform redesign, or infrastructure support. We implement RadarCom on TI AWR2243 automotive radars and evaluate it under static, dynamic, and challenging real-world conditions. Results show an average effective data rate of 5.55 kbps with symbol error rates below 1.5%, while maintaining sensing F1 scores of up to 80.5% during concurrent communication. These results demonstrate the feasibility of transforming commodity automotive radars into dual-purpose communication and sensing devices.

Comment
Accepted to ACM SenSys 2027. 14 pages

Closest papers

Nearest neighbours by meaning across the whole index.

Collision Avoidance and Collision Detection Strategies to Counteract Large-Scale FMCW Automotive Radar Interference

cs.NI ·2026-11-09 ·Francesco Miccoli, Vittorio Todisco, Fabrizio Cuccoli, Matteo Passeri, Vincent Martinez +1 more
published similarity 0.65
Abstract · 7 pages, 10 figures, 1 table. Accepted at IEEE VTC-Fall 2026, Boston

Automotive radars operating in dense traffic environments may experience significant mutual interference, potentially degrading sensing reliability for advanced driver assistance systems (ADAS). This issue motivates the development of techniques to mitigate interference among multiple radar-equipped vehicles sharing the same spectrum. This paper investigates interference mitigation strategies for uncoordinated radar networks through system-level simulation. Two approaches are considered: frame-by-frame collision avoidance (FbF-CA), which exploits idle intervals to measure the perceived interference and possibly adapt the operating frequency, and frame-by-frame collision detection (FbF-CD), which estimates interference during transmission based on observed chirp collisions. An event-driven radar network simulator is used to model realistic highway traffic and radar interactions. Results show that collision avoidance provides higher robustness when a larger bandwidth is available, while collision detection is more effective under bandwidth-limited conditions. The analysis highlights the trade-off between collision avoidance and collision detection mitigation strategies and provides design insights for scalable automotive radar deployments.

0.35

Doppler-compensated Space-time Coding for MIMO PMCW Radar

eess.SP ·2026-10-19 ·Gabriel Daniel, Hanqing Wu, Ashish Pandharipande, Geert Leus
similarity 0.60
Abstract · Under review for a publication in IEEE Transactions on Signal Processing

Phase modulated continuous wave (PMCW) radar is an attractive choice for automotive sensing due to its high dynamic range, interference robustness, and support for integrated communication and sensing. In multiple-input multiple-output (MIMO) PMCW radar, code division multiplexing (CDM) separates transmit signals, but non-ideal auto- and cross-correlation properties increase range sidelobes and degrade dynamic range. This paper proposes a Doppler-compensated space-time coding (STC)-based MIMO PMCW radar framework that separates transmit signals before range correlation, eliminating cross-correlation terms under perfect compensation and allowing the same binary sequence to be used across transmit antennas. The Doppler influence on STC decoding is analytically characterized, showing that chip-wise and inter-STC-slot phase distortions increase range sidelobes and generate ghost components in the direction-of-arrival (DOA) spectrum. To mitigate these effects, Doppler is estimated first, followed by joint fast-time and STC-slot compensation before decoding. Residual STC leakage under imperfect Doppler estimation is quantified, and the processing is extended to multiple moving targets through Doppler-bin-dependent compensation. Theoretical analysis and simulation results demonstrate reduced range sidelobes and suppression of DOA ghosts, while maintaining flexibility in code sequence design.

0.21

A Systematic Evaluation of Infrastructure-Based Radar System for Highway Traffic Monitoring

cs.CV ·2026-09-22 ·Tianheng Zhu, Woei-chyi Chang, Alamss Riaz, Sogand Hasanzadeh, Yiheng Feng
publishedcode/data similarity 0.57
Abstract · Accepted by IEEE ITSC 2026. Compared with the accepted version, this version includes an expanded trajectory tracking analysis with addition…

Infrastructure-based radar systems offer robust and long-range solutions for traffic monitoring, yet their detection and tracking performance under real-world conditions remains insufficiently evaluated. This study introduces DRaT (Drone and Radar Trajectories), a dual-modality dataset of naturalistic vehicle trajectories collected at a highway merging segment in Fort Worth, Texas, to systematically assess radar sensing performance against drone-derived ground truth. The performance is evaluated at three levels: individual vehicle detection, trajectory tracking, and macroscopic traffic parameter estimation. For individual vehicle detection, the radar achieves an overall precision of 78% and a recall of 57%, with degraded performance under congested traffic conditions and at longer distances. At the trajectory level, the radar demonstrates reasonably strong tracking performance (IDF1 = 0.699), maintaining reliable vehicle identities when tracks are successfully established. For macroscopic traffic flow metrics, the radar accurately estimates space-mean speed (MAPE < 4%) but underestimates density and volume by approximately 23% due to missed detections. The paper also discusses practical deployment considerations and potential downstream applications of roadside radar sensing systems. To support reproducible research on infrastructure-based sensing systems, we have open-sourced the DRaT dataset on Zenodo: https://zenodo.org/records/20171110.

0.67

RaMOD: Moving-Object Detection from Raw mmWave Radar Cubes under Ego Motion

cs.RO cs.CV ·2026-11-09 ·Yuan Fang, Long Zhuang, Lingzi Xing, Xijia Wei, Jingqi Jiang +3 more
similarity 0.57
Abstract

Millimeter-wave (mmWave) radar provides weather-robust sensing and direct Doppler measurements, yet automotive perception pipelines often reduce its output to sparse point clouds or two-dimensional projections, leaving raw range-azimuth-Doppler (RAD) cubes underutilized. Ego motion induces Doppler responses from world-static structures, while Doppler wrapping aliases radial velocities, complicating moving-object detection and velocity estimation. We present RaMOD (Radar-based Moving-Object Detection), a real-time framework for moving-object detection and velocity estimation from raw RAD cubes acquired by a vehicle-mounted single-chip radar. RaMOD explicitly estimates frame-wise ego motion and uses the estimated radar translational velocity to predict the Doppler region of world-static structures and suppress returns within it. It temporally encodes the suppressed cubes into multi-scale features to predict RAD-space boxes with class labels. For each detected object, it predicts radial and forward velocities under raw-Doppler and Doppler-unwrapped hypotheses, together with Doppler-wrapping probabilities. On our BRIDGE-Liv dataset, RaMOD outperforms all compared raw-radar methods across RAD-cube, RA, and RD detection settings, achieving 80.8% cube mAP at IoU 0.30, 15.7 percentage points above the strongest RAD-cube baseline. Velocity MAE is 1.128 m/s, with 99.87% Doppler-wrapping accuracy.

0.21

Joint Target-Tag Estimation in Ambient Backscatter-Based ISAC

eess.SP ·2026-10-04 ·Awadhesh Gupta, Kumar Vijay Mishra, Naveen K. D. Venkategowda, Aditya K. Jagannatham
top venuetheory similarity 0.57
Abstract

Integrated sensing and communication (ISAC) has emerged as a key paradigm for unifying radar sensing and wireless communications within a shared hardware and spectral framework. In parallel, ambient backscatter communication (AmBC) has gained attention as a low-power solution for enabling passive connectivity by modulating and reflecting existing radio-frequency signals. Motivated by these developments, this paper investigates an integrated sensing and ambient backscatter communication (ISABC) framework in which a dual-functional radar-communication (DFRC) transceiver jointly performs high-resolution target sensing and low-power tag detection in cluttered environments. Within this ISAC and AmBC setting, we develop a comprehensive system model that jointly captures the estimation of target and clutter parameters, including delay, Doppler shift, and complex reflectivity, together with the recovery of embedded AmBC tag symbols. The resulting DFRC signal model reveals strong coupling among direct-path reflections, clutter echoes, and passive backscatter signals, leading to a highly entangled estimation problem. To address this challenge, we propose a robust three-stage signal processing framework that sequentially estimates target and clutter parameters before detecting the AmBC tag message. This structured approach effectively disentangles the superimposed components, improving both sensing accuracy and communication reliability in ISAC systems. Extensive simulations, benchmarked against the Cramer-Rao lower bound (CRLB), demonstrate the superior estimation performance of the proposed DFRC-based solution. The results further highlight the fundamental trade-offs between sensing accuracy and backscatter communication efficiency in ISABC systems.

0.42

Rad-R: A Raw-ADC Radar Dataset and Capture-Invariant SSM for Hardware-Fault Diagnosis

cs.CV ·2026-08-31 ·Mainak Mallick, Junghwan Yim, Alankrit Gupta, Seung-Kyum Choi
benchmarkdatasetunusual similarity 0.56
Abstract · v2: author list updated

Automotive mmWave radar can develop vibration, antenna misalignment, radome blockage, and receive-channel degradation that corrupt the signal before perception begins. Data for these faults are scarce because each condition must be induced and measured on physical hardware. We introduce Rad-R, a raw-ADC dataset captured with a 4-chip 77GHz TI MMWCAS-RF-EVM cascade (192 virtual channels). Unlike existing raw-radar datasets, Rad-R pairs each recording with a controlled hardware fault at a calibrated severity, an independent physical severity measurement, and frame-synchronised IMU, temperature, GPS, and camera streams. Rad-R is a single-session dataset, so our generalisation claims are confined to a controlled cross-severity protocol in which train and test use physically distinct captures. A reproducible benchmark evaluates seven representative vision backbones and the proposed raw-IQ Mamba SSM (RadrNet) under within-clip, chirp-wise anytime, few-shot cross-capture, and controlled cross-severity protocols. Within-clip performance is near-saturated ($>0.98$ macro-F1), whereas cross-severity generalisation remains difficult: the absolute-phase RadrNet-DS falls to $0.49$ macro-F1. RadrNet-DS-CI replaces absolute phase with per-frame-standardised magnitude and relative chirp-to-chirp phase and ranks first on the controlled benchmark ($0.663$ vs. $0.628$ for the strongest RD-CNN; three seeds); the RadrNet family also leads on the anytime and few-shot budgets. A descriptive cross-modal analysis further finds that radar micro-Doppler covaries with independently measured IMU vibration energy (pooled Spearman $ρ=0.41$ across conditions). The complete dataset and code will be released publicly under permissive licences.

0.52

FreqPKC: Frequency-Aware PeakConv for Radar Semantic Segmentation

cs.CV ·2026-10-24 ·Yangyong Deng, Pengyu Zhang, Shaoqiu Song, Xiaotao Huang, Jian Wang
similarity 0.56
Abstract

Automotive millimeter-wave (mmWave) radar has attracted increasing attention for semantic segmentation in autonomous driving, owing to its robustness under adverse weather and lighting conditions. Recent works have introduced radar-specific neural operators such as PeakConv (PKC), inspired by constant false alarm rate (CFAR) detection, to better model the peak-dominated characteristics of radar images. However, existing methods typically treat the guard bandwidth as learnable parameters, without explicitly characterizing the frequency response of the PKC operator. In this work, we revisit PKC from a frequency-domain perspective and propose Frequency-Aware PeakConv (FreqPKC), which explicitly models and exploits its underlying spectral characteristics. By analyzing the frequency response of PKC, FreqPKC enables the network to capture a broader range of frequency components and adaptively adjust its effective bandwidth. With the proposed Frequency-Aware (FA) module, the network can infer appropriate guard bandwidths to balance high- and low-frequency information: it enhances high-frequency components in target regions for more precise segmentation while suppressing noise through low-frequency filtering in background areas. Building on FreqPKC, we further develop FreqPKC-Net, a radar semantic segmentation (RSS) framework that integrates frequency-guided adaptive modulation with cross-view fusion for multi-view inputs, and can also be adapted to single-view data. Experiments on the public datasets CARRADA, CARRADA-RAC, and a self-built dataset named RS-SAR demonstrate that FreqPKC-Net consistently outperforms existing SoTA methods on both range-Doppler and range-angle views.

0.27

AFDM-ISAC Design Amalgamating FMCW Radar and Carrier Aggregation

eess.SP ·2026-10-29 ·Qu Luo, Qihao Peng, Zihuai Lin, Maged Elkashlan, Pei Xiao +2 more
publishedhot direction similarity 0.56
Abstract

Carrier-aggregation (CA)-assisted affine frequency division multiplexing (AFDM) is conceived for integrated sensing and communication (ISAC) systems. A frequency-modulated continuous-wave (FMCW)-inspired dechirping receiver is developed to exploit the inherent pulse-compression property of AFDM chirp subcarriers for accurate delay-Doppler estimation. To further enhance sensing performance, a pair of CA schemes is proposed. The Type-I CA scheme improves sensing accuracy by aggregating echo signals across multiple CA bands prior to radar processing, thereby reducing estimation error with low hardware overhead. The Type-II CA scheme enhances range resolution by effectively enlarging the sensing bandwidth, where chirps from different CA bands are designed to form a continuous set of chirp signals. Based on this principle, variable subcarrier sensing and asynchronous sensing schemes are developed. For the communication receiver, the generalized input-output relationship of AFDM is derived under both fractional delay and fractional Doppler (FDFD) channels. To address the challenge of FDFD estimation, a cross-domain sensing-assisted channel estimation (CDS-CE) scheme is proposed to facilitate time-domain delay-Doppler parameter estimation and affine-domain channel coefficient recovery. Simulation results demonstrate that the proposed framework achieves significant improvements in sensing accuracy and resolution, as well as in channel estimation performance compared with state-of-the-art methods.

0.35