CS Paper Radar

Peg-in-Bench: A Modular Benchmark for High-Precision Robotic Insertion

Yosel Delgado, José G. Buenaventura-Carreón, Floris Erich, Roman Mykhailyshyn, Tomohiro Motoda, Koshi Makihara, Yukiyasu Domae

cs.RO ·submitted 2026-09-01 08:37 UTC · v1
benchmarkcode/data

Abstract

High-precision insertion remains a fundamental challenge in robotic manipulation due to the strict alignment requirements and contact-rich interactions involved. Although peg-in-hole tasks are widely used for evaluation, existing bench- marks often rely on fixed task configurations, limiting their ability to assess robustness and generalization across different insertion scenarios. This paper introduces a reconfigurable peg-in-hole benchmark designed to evaluate task generalization in high-precision insertion. The benchmark consists of a set of fully 3D-printable modular components, including multiple peg geometries, tolerance levels, and configurable base structures that can be combined to generate a large variety of insertion and assembly tasks. By varying object layouts, orientations, and task structures while maintaining controlled physical conditions, the benchmark enables systematic evaluation of adaptation to unseen scenarios. To support reproducibility, we additionally provide a scenario generation tool capable of producing standardized task configurations and machine-readable task descriptions. The scenario generation tool and the STL files of the benchmark pieces are available through the project repository: https://github.com/aistairc/peg-in-bench.

Comment
6 pages, 5 figures

Closest papers

Nearest neighbours by meaning across the whole index.

LABIT: Long-Horizon Robotic Assembly Benchmark for Industrial Tasks

cs.RO ·2026-10-12 ·Constantin Schempp, Christian Friedrich, Luca Kofler, Laura Suhm
benchmarkcode/data similarity 0.68
Abstract · This work has been submitted to an Elsevier journal for possible publication. Copyright may be transferred without notice, after which this …

Robot learning has undergone significant advancements in the domain of compliant control and robotic assembly. The development of novel methodologies has transcended the capacity to address discrete tasks, such as grasping or inserting, and has evolved to encompass the comprehensive construction of entire assemblies. Conventional benchmarks, which are predominantly focused on single tasks, are no longer adequate to address the complexity and interconnected nature of modern manufacturing processes. Consequently, the necessity for benchmarks to encompass a broader spectrum of assembly and subassembly steps is becoming apparent. In light of these developments, we propose LABIT, an industrial robotic assembly benchmark for long-horizon manipulation. This benchmark encompasses DIN-norm assembly tasks, including screwing, placing, inserting, and snapping, under both high and low tolerance conditions. The successive nature of these assembly steps implies that prior errors can influence subsequent manipulation. Consequently, this benchmark is particularly relevant for assessing the robustness of intelligent robotic systems. The proposed benchmarking protocols and novel performance metric, based on a taxonomy of assembly complexity in conjunction with the comprehensive list of parts and their corresponding CAD models, serve as essential tools for research and development in the field. To provide a baseline, we evaluate the benchmark using traditional force-position control and report reliability and score metrics per primitive, subtask, assembly category, and subassembly. Accompanying data is available at https://irp-hka.github.io/robotic-assembly-benchmark/.

0.48

End-to-End Autonomous Generation of Human Assembly Plans

cs.RO cs.GR ·2026-10-07 ·Faustin Arion von Arx, Millicent Schlafly, Mark D. Fuge
code/data similarity 0.66
Abstract · 22 pages, 10 figures

Turning a CAD design into an assembly plan is still largely done by hand, requiring engineers to reason about geometric feasibility, tool access, stability, and the ergonomics of human assembly. In this work, we encode long-established design for assembly (DfA) principles into a contained, end-to-end approach for generating assembly plans. Our approach takes only a mesh assembly and produces either a step-by-step assembly manual or a structured failure report, requiring no joint metadata, fastener annotations, or additional information. Four major components of a manufacturing plan are addressed autonomously: an assembly tool list, the assembly sequence and subassemblies, an assembly manual, and design feedback for improving assemblability. For determining the sequence plan, we systematically disassemble the object in a physics simulator and apply a cost function that encodes DfA principles. Manual generation, tool labelling, and assembly feedback rely primarily on multimodal large language models. Compared with a baseline that always removes the outermost part first from Tian et al., DfA-aware sequence planning reduces simulated assembly time, measured with a robot-arm assembly-time proxy, by 35% on 136 assemblies of 5 to 30 parts. The correct tool is selected for 88.6% of assembly steps. A vision-language model judge compares the generated manuals against ablated variants, identifying which page elements carry the information a reader needs. The presented approach and open-source code are available for use by engineers or AI agents looking to rapidly accelerate the creation of manufacturing plans for a given product design.

0.39

Representation-Guided Generation and Integration of Executable Programs for Robot Manipulation

cs.RO ·2026-09-25 ·Ruixiao Yang, Mingxin Yu, Chuchu Fan
similarity 0.66
Abstract

Building a robotic manipulation system requires connecting perception, planning, and control through carefully designed representations and interfaces. VLM code generation offers a way to automate this construction, but independently generated components may operate on incompatible geometric and task-level information. We present Representation-guided Integration of VLM-generated Executable Task programs (RIVET), a framework for generating complete manipulation systems around a shared object-centric representation. The representation combines per-object 6D poses, which preserve the metric information required for action grounding, with a relation graph that exposes the task-level structure required for planning. Guided by this representation, a VLM generates cooperating perception, rendering, relation-inference, and planning programs, each combining task-specific computation with available packages where useful. The resulting programs are authored once for a manipulation domain and reused on unseen start and goal configurations without code regeneration. We evaluate RIVET on cube stacking, tangram rearrangement, and three-dimensional assembly in simulation and on a physical robot, where we achieve 83% overall success rate in the real world by reusing offline-generated systems. Our results demonstrate that representation-guided program generation can adapt a common manipulation framework to tasks with different geometric, relational, and sequential requirements.

0.17

InsertAnything: Generalizable Contact-Rich Precision Insertion from Simulation to Reality

cs.RO ·2026-09-21 ·Zhenghua Ma, Xinpan Meng, Zeyu Liu, Muyuan Ma, Hengdi Zhang +2 more
benchmarkcode/data similarity 0.66
Abstract

Contact-rich precision insertion is a key manipulation skill in robotic assembly. Tight clearances make insertion more sensitive to alignment errors and prone to collisions and jamming, while variations in geometry and clearance across parts further complicate policy reuse. We present a reinforcement learning framework that trains insertion policies entirely in simulation for direct deployment without real-world demonstrations or policy fine-tuning. By combining target poses with compact three-dimensional fingertip force feedback, the policy learns to search for alignment and correct its motion despite errors in the estimated hole position. A decoupled gated reward coordinates alignment and insertion. Force-signal smoothing and state-independent standard deviations stabilize the learning process. The resulting policies perform real-world insertion across multiple hole geometries with a minimum nominal clearance of 0.02 mm and improve success while reducing peak contact forces under hole-position errors. Cross-clearance and cross-geometry evaluations further confirm policy generalization. The system achieved the first perfect score of 20/20 on ManipulationNet's peg-in-hole benchmark under its Human-in-the-Loop protocol, with fully autonomous insertion motions. A single policy trained only on a simulated hexagonal insertion task achieved an overall success rate of 95.0% across eight unseen real-world insertion tasks. These results show that learning entirely in simulation can yield precision insertion skills that can be deployed directly and reused across real-world tasks. The project website (https://mzhsoul.github.io/InsertAnything/) provides open-source simulation and real-robot experiment scripts, assets, and trained checkpoints.

0.35

APTree: Extended Behavior Trees for Adaptive and Scalable Automated Robotic Task Planning in Construction

cs.RO cs.AIcs.SE ·2026-10-13 ·Shermin Sherkat, Thomas Wortmann, Andreas Wortmann
published similarity 0.65
Abstract · Accepted for publication in The Journal of Systems and Software. 46 pages, 17 figures, 16 listings, 6 tables

Task planning for robots in off-site construction prefabrication is primarily manual, leading to planning inefficiencies and reluctance to adopt robotic solutions. Existing approaches provide limited support for scalable, modular automated task planning and localized runtime replanning. This paper proposes APTree, a model-driven framework that integrates automated task planning with modular task execution using behavior trees as the execution model. APTree repeatedly applies and coordinates heterogeneous symbolic planners to automatically generate and compose modular task plans at runtime. To support this approach, we develop a domain-specific language for the formal specification and validation of task plans, together with a compatible execution engine. We evaluate APTree on the real-world livMatS Biomimetic Shell pavilion, where it models the construction robotic fabrication domain, detects injected specification and planning errors at design time and runtime, and automatically generates large-scale task plans by coordinating three symbolic planners across numerous planning modules. A machine-checked formal analysis further shows that composed execution and local replanning are safe under explicitly stated assumptions, including planner soundness and non-interference of generated plans, providing practitioners with explicit conditions for dependable plan composition. APTree thus enables construction practitioners to leverage automated task planning without requiring detailed knowledge of symbolic planning techniques or APTree's internal implementation.

0.33

Plausible Future, Wrong Choice: Steering World-Action Models toward Intended Future

cs.RO cs.AI ·2026-10-20 ·Zhuohao Li, Jiawei He, Yuxuan Yan, Lang Zhou, Yinghao Li +9 more
benchmark similarity 0.64
Abstract

World-Action Models (WAMs) have emerged as a promising paradigm for embodied generalist policies by jointly modeling future world evolution and robot actions across diverse manipulation tasks. However, representing diverse futures is only the first step: a capable WAM must also generate futures that match the requirements of the current task and execution progress. In long-horizon manipulation where similar observation-action segments occur across different tasks and stages, existing approaches may generate locally plausible yet misdirected rollouts to drift toward wrong task stage, i.e., a phenomenon we term Stage Confusion. To address this problem, we propose TaskWAM, a closed-loop, stage-aware framework that represents fine-grained task requirements with Mode Tokens and tracks execution progress with State Tokens, forming a structured task state to steer world--action generation toward intended future. We further introduce StageBench, a controlled multi-stage manipulation benchmark with parameterized stage variations and automated evaluation.Extensive experiments on both simulation benchmarks and real-world tasks demonstrate that TaskWAM effectively reduces confusion and achieves competitive performance with state-of-the-art methods. Moreover, TaskWAM provides strong plug-and-play transfer across heterogeneous WAM architectures and robot embodiments, including single-arm robots, dual-arm grippers, dexterous hands, and humanoid robots.

0.14

Robot Tool Design from Scratch via Behavior-Aware Hierarchical Optimization

cs.RO ·2026-09-28 ·Yinghan Chen, Xiyao Tian, Yizan Dai, Yuyang Li, Yixin Zhu
similarity 0.64
Abstract

The ability to design a tool for a task marks a level of intelligence beyond merely understanding, selecting, or using one. Existing methods for robotic tool design typically optimize a tool's continuous shape and action within a structure that is prescribed or generated beforehand, so the structure itself stays outside the physical optimization loop. We study task-driven tool design from scratch, where tool structure, shape, and action are all derived from the desired physical outcome. Here we show that the three elements can be designed jointly by HOT, a hierarchical optimization whose upper level searches over discrete tool structures with BASS, while lower-level physical optimization evaluates their task behavior and returns milestone progress as behavioral evidence for the search, ultimately providing jointly optimized shape and action. On four tool-use tasks with distinct physical functions, HOT discovers functional structures after evaluating only a small fraction of search spaces containing up to 56 million structures, and the subsequent refinement of their geometry lowers the task loss on all tasks while preserving success, through deformations that are functionally interpretable. Once 3D printed, the tools accomplish all tasks on a real robot with the actions found in simulation. Designing tools from required physical effects, rather than a catalog of known tools, is a step toward the open-ended tool making seen in humans and animals.

0.23

On-Demand Robotic Assembly via Differentiable Geometric Part Repair

cs.RO ·2026-10-07 ·Millicent Schlafly, Fabio Schaub, Diogo Costa Pais, Luca Lelli, Janne Dvorak +3 more
similarity 0.64
Abstract · 8 pages, 4 figures, and 2 tables

Transitioning from a digital design to a robotic assembly process currently requires months of expert manual tuning to reconcile part geometries with robotic constraints. This paper presents an end-to-end, autonomous pipeline for the design and physical construction of bespoke wooden assemblies. A generative AI agent translates user prompts into initial 3D geometries, balancing the visual fidelity of the design with select physical constraints. The assemblability of the design is further improved by a gradient-based repair stage that backpropagates through a graph attention network surrogate to adjust component geometries. In addition to correcting for disjointed and overlapping components, we demonstrate hardware-specific corrections, differentiably optimizing the geometry of components to enable robot screwdriving for 86.7% of 60 novel natural language inputs, significantly outperforming prior work by a factor of ten. For ten of the structures, we physically demonstrate assemblability with two UR5e robots. This work marks a meaningful step toward on-demand robotic manufacturing, enabling the rapid production of customized, low-volume goods.

0.30