CS Paper Radar

SliceBridge: Context-Consistent Repair of Corrupted Slice Intervals in T1-Weighted MRI

Jiheng Li, Michael E. Kim, Trent M. Schwartz, Gaurav Rudravaram, Derek B. Archer, Timothy J. Hohman, for the Alzheimer's Disease Neuroimaging Initiative, Lianrui Zuo, Bennett A. Landman

cs.CV ·submitted 2026-09-01 20:00 UTC · v2

Abstract

Structural magnetic resonance imaging (MRI) images are sometimes corrupted over a contiguous set of slices, where acquisition, motion, hardware, or reconstruction effects leave a single slice or short interval inconsistent with its neighbors while the rest of the image remains usable. Such localized corruption can bias downstream morphometric analysis, yet discarding or reacquiring an otherwise usable image is costly. We formulate this as an image restoration problem: given the location of the affected interval, reconstruct those slices from the surrounding anatomical and imaging context. We propose SliceBridge, a framework for restoring corrupted slice intervals in T1-weighted MRI using rectified flow matching conditioned on the surrounding intact slices and their relative slice positions. Through-plane consistency is encouraged by coupling the slices within the interval through interval-correlated initial noise, a shared flow time, and synchronized sampling. The restored interval is then inserted back, leaving all other slices unchanged. We trained and validated the model on 9,877 T1-weighted brain MRI volumes from four datasets and evaluated it on 581 external subjects using clean interval withholding and controlled corruptions. Compared with a matched model that reconstructed target slices independently, SliceBridge reduced error in slice-to-slice changes within repaired intervals by 32.9%-41.3% across interval lengths and achieved higher SSIM at every interval length. In controlled-corruption cases, SliceBridge reduced the median error in regional brain volume estimates produced by a downstream segmentation model from 1.95% in corrupted volumes to 1.05%.

Closest papers

Nearest neighbours by meaning across the whole index.

RARF: Region-Aware Rectified Flows for 3D Brain MRI Inpainting

cs.CV cs.AIcs.LG ·2026-09-03 ·Tomas Guija-Valiente, Blanca Rodriguez-Gonzalez, Norberto Malpica, Angel Torrado-Carvajal
code/data similarity 0.68
Abstract · 11 pages, 2 figures. Preprint version corresponding to the initial submission prior to peer review, submitted as part of our participation i…

Medical image inpainting has the potential to improve automated brain MRI analysis by reconstructing healthy tissue within pathological regions. We introduce RARF, a task-agnostic region-aware rectified flow framework for masked data generation. We instantiate the framework for 3D brain MRI inpainting as our submission to the BraTS Inpainting Challenge 2026. RARF restricts the stochastic interpolation process to the inpainting region, while the observed voxels remain fixed and provide patient-specific anatomical context. A three-dimensional neural network receives the partially voided image, with Gaussian noise filling the missing region, together with the inpainting mask and the corresponding timestep. The model is trained using masked flow-matching and reconstruction-consistency objectives, combined with mask-aware preprocessing and data augmentation. During inference, the learned velocity field transports the initial noise toward a plausible reconstruction of the missing tissue, which is then combined with the unchanged observed anatomy. Experiments under the BraTS evaluation protocol show that the proposed approach produces competitive reconstructions while maintaining anatomical consistency. Source code is available at: https://github.com/TomasGuija/rarf.

0.41

Measure Before You Repair: An Explainable Agent for Blind Restoration of Multi-Artifact 3-D MRI

eess.IV cs.AI ·2026-11-02 ·Necati Sefercioglu, Mehmet Ozan Unal, Metin Ertas, Altan Cakir, Isa Yildirim
similarity 0.65
Abstract · 5 pages, 3 figures, 4 tables. Submitted to ISBI 2027

A brain MRI scan can carry an unknown mix of artifacts, so restoration has to be blind, yet most deep-learning methods are built to correct one known artifact. We present Dx-Rx, an agent in which a multimodal large language model (MLLM) measures suspected artifacts before it repairs them. To our knowledge, it is the first agent to restore whole 3-D MRI volumes, whereas earlier MRI agents restore 2-D slices. In a loop, it looks at slices of the 3-D volume, calls five diagnostic tools (noise, spike, ghosting, bias field, motion) and four restoration tools in any order it chooses, checks each repair, can return to any earlier version to change the order, and ends with a radiology-style report of its diagnostic reasons, the repairs it applied and their results. We simulated up to five artifacts on 148 whole 3-D T1-weighted volumes, at levels calibrated to radiologists' grades of real scans. An MLLM that only looked at the image, as earlier MRI agents do, removed at most 19.7 % of the artifact error. With the best of five MLLMs, Dx-Rx removed a mean 64.5 %, nearly matching the 64.6 % of the same tools given the ground-truth artifacts, which are never known for a clinical scan. With all five models, it made no volume worse and was on par with or better than an expert rule-based pipeline built from the same tools (62.3 %). Code and demo are public at https://itu-biai.github.io/measure-before-you-repair.

0.36

Learning Where and How Much to Sample: Volume-Adaptive k-Space Acquisition for Accelerated MRI

cs.CV ·2026-11-18 ·Reyhaneh Neshatavar, Mohsen Yavartanoo, Kyoung Mu Lee
similarity 0.64
Abstract

Magnetic resonance imaging (MRI) is an essential medical imaging technique, but its high costs and long acquisition times can limit accessibility. Accelerated MRI reduces acquisition time through k-space undersampling, yet conventional methods often rely on predefined sampling patterns and uniform slice budgets, overlooking anatomical variations and inter-slice relationships. In this paper, we propose a volume-adaptive k-space acquisition framework that jointly learns where and how much to sample across an entire MRI volume. Using only acquired auto-calibration signal (ACS) measurements, our method exploits volume-wide anatomical information to adaptively allocate sampling budgets across slices while identifying informative k-space lines. A learned joint slice--frequency refinement module coordinates sampling decisions while preserving an exact total volume-level acquisition budget. To reconstruct the acquired measurements, we design a sensitivity-aware synchronous cross-slice reconstruction network that estimates coil sensitivities from ACS measurements and progressively refines neighboring-slice reconstructions while enforcing hard k-space data consistency. Both networks are jointly optimized using reconstruction-based supervision without requiring fully sampled k-space at inference. Experiments on knee and brain MRI across multiple contrasts and acceleration factors demonstrate the adaptive behavior of our acquisition framework and evaluate its reconstruction performance.

0.23

Anatomically Faithful Artifact Suppression in SENSE Accelerated Brain MRI

eess.IV cs.CV ·2026-09-18 ·Changjing Chai, Bin Huang, Libo Xu, Jian Zhou, Boyang Pan +3 more
similarity 0.64
Abstract · 18 pages of main text, 2 pages of appendix, 6 figures, and 6 tables (including 2 appendix tables)

Background: Four-fold accelerated sensitivity encoding (SENSE4) can shorten brain MRI acquisition time but may amplify noise and result in residual aliasing artifacts after conventional reconstruction. Purpose: To evaluate whether an image-domain refinement framework can improve the quality of SENSE4 brain MRI while preserving anatomical information for quantitative measurements. Methods: In this prospective paired study, 80 participants underwent fully sampled and four-fold accelerated SENSE T1-weighted MRI. We developed an Anatomy-aware Residual Attention Network (ART-Net) to refine accelerated reconstructions through generalized self-attention and correlation-based residual artifact regularization. Participant-level splitting yielded training, validation, and independent test cohort (45/5/30 participants). The independent test cohort underwent quantitative, segmentation-based, and blinded radiologist assessments of image quality and anatomical preservation. Results: ART-Net demonstrated highly competitive reconstruction performance, achieving the highest peak signal-to-noise ratio (31.03 +/- 2.88 dB) and structural similarity index (0.963 +/- 0.022) among evaluated methods. It also demonstrated improved anatomical fidelity, with numerically highest Dice coefficients for medial temporal structures relevant to atrophy assessment (0.8824 +/- 0.0827) and whole-brain regions (0.8857 +/- 0.0885). Moreover, ART-Net improved gradient fidelity, regional contrast preservation, and radiologist-rated structural quality. Conclusion: ART-Net improved agreement between SENSE4 and fully sampled T1-weighted images in a single-center, held-out test cohort while maintaining segmentation-derived anatomical measurements. These findings suggest that ART-Net may support accelerated brain MRI by improving image fidelity and enabling reliable downstream anatomical analysis.

0.23

Conditional Flow Matching for Cross-Field MRI Harmonisation

cs.CV ·2026-09-01 ·Baris Imre, Aram Salehi, Levente Baljer, Andrew Webb, Marius Staring +1 more
similarity 0.63
Abstract · 10 pages, 2 figures

Magnetic resonance images of the same subject look markedly different across field strengths, which complicates the comparison and pooling of data across sites. We address cross-field brain-MRI translation for the MRIxFields2026 challenge, and in particular its Task~3: a single model that translates between any directed pair of the five field strengths and across three contrasts. We phrase the problem as a conditional flow matching path: because the source and target volumes are spatially registered, we learn a velocity field that carries the source slice directly to the target slice, rather than starting from noise. To learn this mapping from only three paired subjects, the unified model is trained in three stages: a degradation-bridge pretraining that distills a restoration prior from the abundant unpaired retrospective cohort, a cross-field finetuning over all directed pairs on the paired cohort, and an adversarial refinement that sharpens the output. At inference, we integrate the learned velocity with a second-order Heun solver in a handful of steps. A restoration prior learned without any paired data already reaches a mean SSIM of 0.837, and each subsequent training stage improves on it. A single 6.3M-parameter model thereby covers all 60 field-pair and contrast combinations, with inference in five solver steps per slice. On the challenge evaluation set the model reaches a mean SSIM of 0.909, averaged over the three contrasts, outperforming regression and diffusion baselines built on the identical network on all three challenge metrics.

0.22

VariaFlow: Uncertainty-Aware Flow Matching for Unsupervised Anomaly Detection

cs.CV ·2026-10-30 ·Arnela Hadzic, Martin Urschler, Cosmin I. Bercea
published similarity 0.63
Abstract · Accepted for WACV 2027

Reconstruction-based anomaly detection no longer fails at reconstruction. Generative models produce high-quality pseudo-healthy reconstructions, and the remaining difficulty is the step of scoring residuals. The residual between a scan and its reconstruction has two indistinguishable sources, genuine pathology and the anatomical variation that separates one healthy brain from another. Scoring against a single reconstruction treats both as anomalous, inflating false positives where healthy anatomy varies most while small or subtle lesions are lost in the surrounding reconstruction error. We identify the missing quantity as the predictive variance, how much a healthy reconstruction can vary at each location. We introduce VariaFlow, which estimates this variance from an ensemble of mask-guided restorations under an unconditional flow matching prior, each started from a different noise initialization, and which normalizes the residual by the resulting standard deviation. Few-step flow matching keeps the ensemble computationally affordable, and restoring at two spatial scales captures lesions of different size. Across three brain MRI datasets spanning stroke and tumor, VariaFlow is trained once on healthy anatomy and generalizes across all three, attaining the highest AUROC (0.94, 0.80, 0.78) on each and the highest AUPRC on both cross-domain datasets, exceeding the strongest baseline by 37% and 50%. Under domain shift, the same baseline drops by up to 52% in AUPRC, whereas VariaFlow stays more stable and achieves the best small-lesion Dice on all three datasets.

0.29

Arbitrary-Scale Anisotropic 3D MRI Super-Resolution with Gaussian Prototypes

cs.CV ·2026-10-17 ·Aditya Rastogi, Ramon Leiser, Prateek Singh, Martha Foltyn-Dumitru, Martin Bendszus +6 more
similarity 0.63
Abstract · 26 pages, 6 figures, 15 tables (including appendix)

Reducing MRI acquisition time improves patient comfort, reduces motion artefacts, and increases scanner throughput. Clinical protocols often shorten acquisitions by sacrificing spatial resolution, particularly along the slice axis. Super-resolution can recover higher-resolution images, but existing methods are typically specialised to one scale or acquisition geometry, limiting their use across heterogeneous clinical protocols. We present GSMR3D, a continuous volumetric model that reconstructs arbitrary isotropic and anisotropic resolutions with a single checkpoint per MRI contrast. It combines a learned dictionary of anisotropic 3D Gaussian prototypes with scale-conditioned frequency encoding and an exact measurement-consistency projection, keeping reconstructions consistent with the acquired low-resolution data. We train separate models on 3,731 contrast-enhanced T1-weighted and 30,254 T1-weighted brain MRI volumes from clinical and population-based cohorts. We evaluate GSMR3D against geometry-specific specialists for isotropic, in-plane, and through-plane super-resolution using reconstruction quality and downstream tasks: brain tumour segmentation, brain-metastasis detection, and brain parcellation. GSMR3D outperforms specialists at isotropic $2\times$ and achieves better LPIPS, DISTS, and FID across all geometries, although specialists retain higher PSNR in anisotropic settings. It more faithfully preserves glioma segmentations across all geometries, achieves the highest lesion sensitivity on an independent brain-metastasis cohort, and the highest brain-parcellation agreement for isotropic and in-plane reconstruction. Reconstruction takes about 6s per volume, adding little overhead relative to acquisition-time savings. GSMR3D offers a flexible approach to MRI scan-time reduction with one model per contrast across geometries while preserving information relevant to downstream tasks.

0.17

Zero-Shot Brain MRI Inpainting with 2.5D Unconditional Flow Priors

cs.CV ·2026-10-06 ·Arnela Hadzic, Franz Thaler, Simon Johannes Joham, Martin Urschler
code/data similarity 0.63
Abstract

Generative inpainting of brain MRI volumes is essential for synthesizing healthy tissue in pathological regions, improving the accuracy and reliability of automated downstream brain analysis applications such as image registration, brain extraction, and segmentation. However, standard 3D approaches are computationally prohibitive, while efficient 2D slice-wise methods suffer from severe inter-slice discontinuities. Furthermore, traditional models rely on conditional training, requiring task-specific learning of masked inputs. We propose a zero-shot brain MRI inpainting framework utilizing 2.5D unconditional flow priors to capture spatial context along the superior-inferior axis without the overhead of full 3D convolutions. During training, our flow matching model learns the joint distribution of adjacent axial slice triplets, modeling the manifold of healthy brain anatomy while explicitly excluding pathological regions from the loss function. At inference, the model processes the input triplets autoregressively along the depth axis. We employ the Restora-Flow solver to constrain the unconditional prior using the input mask, achieving accurate zero-shot inpainting. Evaluations show our 2.5D strategy resolves the structural discontinuities of 2D baselines, synthesizing plausible healthy tissue while maintaining volumetric consistency across the axial, sagittal, and coronal planes. As a final step, we generate and average an ensemble of multiple stochastic reconstructions to form the final prediction. Quantitative results benchmarked on the official BraTS 2026 Inpainting Challenge validation set demonstrate the effectiveness of our proposed approach, yielding an SSIM of 0.816 $\pm$ 0.112, MSE of 0.007 $\pm$ 0.005, and PSNR of 22.923 $\pm$ 4.343. Code is available at https://github.com/imigraz/brats2026-inpainting.

0.16