CS Paper Radar

Leveraging Time-Causal State Variable Aggregation for Real-Time Schedule of Massive Air Conditioners

Jingguan Liu, Xiaomeng Ai, Shichang Cui, Xizhen Xue, Shengshi Wang, Jiakun Fang, Jinyu Wen, Yang Shi

eess.SY ·submitted 2026-09-02 10:25 UTC · v1
top venuehighly cited

Abstract

Air conditioner (AC) loads offer promising flexibility for active distribution networks to manage uncertainties, such as those in renewable energy generation, electricity prices, and load demand. However, real-time scheduling of ACs is challenging due to their massive temporal coupling constraints and time-causal uncertainties. To address this, a novel time-causal aggregation-based approximate dynamic programming (TCA-ADP) algorithm is proposed for efficient scheduling. The time-causality requirements for aggregating state variables are first analyzed to align with the real-time sequential decision-making process. Subsequently, an enhanced aggregation model is developed to ensure both high accuracy and adherence to time causality. The aggregation process is further reformulated as a linear program to optimize aggregation parameters and enable tractable computation. Accordingly, the TCA-ADP leverages aggregated state variables to approximate the value function as a new way, balancing computational efficiency and economy against the large value function space of massive ACs. By training the value function offline using historical data, the TCA-ADP efficiently achieves near-optimal real-time scheduling of massive ACs through parallel and closed-form disaggregation. Case studies demonstrate the effectiveness and scalability of the TCA-ADP, highlighting its aggregation accuracy, uncertainty handling, and the trade-off between economy and tractability.

Comment
Published in: IEEE Transactions on Smart Grid (vol. 16, no. 3, pp. 2389-2403, 2025)

Closest papers

Nearest neighbours by meaning across the whole index.

Continuous-Time Aggregation of Massive Flexible HVAC Loads Considering Uncertainty for Reserve Provision in Power System Dispatch

eess.SY ·2026-09-02 ·Jingguan Liu, Xiaomeng Ai, Jiakun Fang, Shichang Cui, Shengshi Wang +2 more
top venuehot directionhighly cited similarity 0.67
Abstract · Published in: IEEE Transactions on Smart Grid (vol. 15, no. 5, pp. 4835-4849, 2024)

Heating, ventilation, and air conditioning (HVAC) loads, with their rapid response capabilities, can provide considerable intra-hour flexibility on the demand side for reserve provision in order to follow the fast variations of renewables. However, scheduling massive HVACs is challenging due to computation complexity and the uncertainty of outdoor temperature. In this paper, we first introduce a novel continuous-time (CT) aggregation model to reveal the potential intra-hour flexibility of HVACs. For accurate aggregation, a new affine transformation is designed to handle the heterogeneity in high-dimensional feasible region. Further, for reliable aggregation in practical environment, the outdoor temperature uncertainty is constructed by distributionally robust chance constrains and integrated into the aggregation model. Secondly, for the tractable calculation of the proposed CT aggregation model, a cascade of tailored reformulation techniques is proposed, including the Bernstein polynomial spline, polytope projection, and linearization transformation. Thirdly, a customized hierarchical dispatch framework is proposed via incorporating the proposed CT aggregation model into reserve provision in power system dispatch, so as to efficiently schedule massive HVACs to cope with the renewable uncertainty. Case studies verify the effectiveness and scalability of the proposed CT aggregation model in aggregation accuracy, intra-hour flexibility utilization, and uncertainty handling.

0.67

Dimension-Reduced ADP for Real-Time Microgrid Operation with Massive Air-Conditioning Loads under Multiple Uncertainties

eess.SY ·2026-09-02 ·Jingguan Liu, Xiaomeng Ai, Shichang Cui, Jiakun Fang, Jinyu Wen
published similarity 0.64
Abstract · Accepted in Proc. 2026 IEEE PES 18th Asia-Pacific Power and Energy Engineering Conference (APPEEC), Singapore, August 24--27, 2026 (Best Pap…

This paper proposes a dimension-reduced approximate dynamic programming (ADP) method for real-time microgrid operation with massive air-conditioning loads under multiple uncertainties. The operation problem is formulated as a multi-stage Markov decision process, and a post-decision value function is introduced to characterize the impact of current decisions on future operating costs. To address the curse of dimensionality caused by massive air-conditioning loads, a consistency-based value function projection is developed to map the high-dimensional state space at each node into a tractable aggregated state space. Based on the reduced states, piecewise linear approximation is further employed for efficient value function training. Case studies on 33-bus and 123-bus systems show that the proposed method achieves near-optimal operation performance with low computational cost and good scalability under both deterministic and stochastic conditions.

0.48

Fast Reassessment of Prolonged Electricity Shortages under Shared Fuel Interruptions

eess.SY ·2026-10-19 ·Dogan Urgun
code/data similarity 0.57
Abstract · 11 pages, 4 figures, 5 tables. Submitted to IEEE Transactions on Reliability. Code and data: https://github.com/DoganUrgun/Fast_Reassessment…

When several generators share a fuel supply, one interruption can disable them together and cause electricity shortages lasting days. Such interruptions can be made less frequent, for example by weatherizing gas supply, or shorter, for example by on-site backup fuel. Yet traditional resource adequacy indices, expected unserved energy and loss-of-load hours, fail to distinguish such measures whenever they remove the same expected time without fuel, because for interruptions independent of system conditions these indices depend on the interruptions only through this time. Their difference is revealed by prolonged-shortage exposure, the expected annual hours in shortages of at least a given duration, whose exact chronological calculation must be repeated for every interruption scenario. To reduce this cost, a fast reassessment method with guaranteed accuracy is proposed. Network calculations are performed once and condensed into a restoration response, the additional prolonged-shortage hours caused by one interruption of each duration, from which any scenario is evaluated as a weighted sum without new simulation. An hour-by-hour error bound determines whether this evaluation is accurate enough, and exact dynamic programming is applied otherwise, so that every result lies within a requested tolerance of the exact value on the same Monte Carlo samples. On the Reliability Test System of the Grid Modernization Laboratory Consortium, most evaluations were accepted, fully accepted scenarios typically ran more than 200 times faster than exact calculation, and total computation time decreased in every workload. Measures against fuel interruptions can thus be screened quickly and accurately by their effect on prolonged shortages.

0.37

Real-Time Operation Strategy of Virtual Power Plants With Optimal Power Disaggregation Among Heterogeneous Resources

eess.SY ·2026-08-27 ·Qixin Chen, Ruike Lyu, Hongye Guo, Xiangbo Su
publishedhot directionhighly cited similarity 0.56
Abstract · Accepted by Applied Energy

The virtual power plant (VPP) can aggregate flexible resources on the demand side to provide frequency regulation for the grid, helping address the supply-demand balance challenges. When deploying regulation, the VPP disaggregates the requested power adjustment in real time among its internal heterogeneous resources. Achieving optimal power disaggregation in this process is challenging due to the temporal coupling characteristics of the resources, the uncertain regulation signals, and the requirement for fast response. Therefore, existing research relies on heuristic methods, such as proportional disaggregation, and fails to leverage the heterogeneity of multiple resources. Here, we propose an optimal operation strategy for VPPs to provide regulation, exploiting the complementary characteristics of heterogeneous resources by prioritizing the use of low-cost resources while considering temporal coupling. To reduce the computational overhead of online deployment, we further propose a fast disaggregation algorithm to eliminate the reliance on optimisation solvers. We conducted case studies on the operation of a VPP composed of resources including thermostatically controlled loads and industrial production processes. The results verified the reduced operation cost and increased profit of the VPP under the proposed strategy, with only milliseconds of online computation time. We believe that our work can help better exploit demand-side flexibility.

0.62

Cost-Informed Learning for Aggregating Building HVAC Flexibility

eess.SY ·2026-09-22 ·Jingguan Liu, Cong Chen, Xiaomeng Ai, Jiakun Fang, Jinsong Wang +1 more
benchmark similarity 0.56
Abstract · 11 pages, 14 figures

This paper develops a cost-informed aggregation framework that learns an aggregate flexibility set of building heating, ventilation, and air-conditioning (HVAC) loads to minimize the aggregator's dispatch cost. Existing aggregation methods mainly use volume-oriented objectives and treat flexibility aggregation and downstream utilization as separate stages. Consequently, the resulting aggregate set may fail to preserve the flexibility most valuable for reducing downstream dispatch costs. To address this limitation, we represent aggregate HVAC flexibility using a parameterized storage-form surrogate and jointly learn the surrogate parameters and the inner-approximation objective from downstream dispatch-cost feedback. This cost-informed feedback allocates the surrogate's limited representation capacity to cost-relevant regions of the aggregate flexibility set. To account for electricity-price uncertainty, we formulate a distributionally robust conditional value-at-risk (DR-CVaR) downstream problem that captures both distributional ambiguity and tail risk. For efficient learning, we reformulate the DR-CVaR problem as a convex second-order cone program. We estimate cost gradients using randomized smoothing and a score-function estimator, avoiding differentiation through large-scale building-level optimization problems. Case studies using NYISO price data show that the proposed framework reduces dispatch costs relative to a volume-oriented aggregation benchmark and that suitable risk and ambiguity settings can lower the out-of-sample CVaR of dispatch costs.

0.22

Efficient Scheduling of Discrete Industrial Processes Through Continuous Modeling

eess.SY ·2026-08-27 ·Ruike Lyu, Xiangbo Su, Ershun Du, Hongye Guo, Qixin Chen +1 more
top venuehighly cited similarity 0.54
Abstract · Published in: IEEE Transactions on Smart Grid ( Volume: 16, Issue: 6, November 2025)

The resource-task network (RTN) model has been widely applied to represent the technical constraints of complex industrial processes (IPs) such as steel-making, providing the basis for industrial demand response. However, the legacy RTN model contains numerous binary variables and applies different formulations for non-flexible and flexible processes, restricting its computational efficiency and applicability. To systematically improve the computational performance of IP models, we propose continuous RTN model (cRTN), a novel modeling approach that uses continuous variables to represent production tasks and progresses, which are then integrated into unified as well as computationally favorable formulations for the technical constraints in discrete IPs, including resource balance, task execution, waiting time limits, and production targets. Compared to the legacy models, cRTN features fewer binary variables, shorter solving time, and better scalability while maintaining the same accuracy. Numerical tests based on a steel plant demonstrate that cRTN is in typical cases 10 times faster than legacy models and remains tractable with increasing batch sizes, which in legacy models leads to larger problem scales and infeasible solving time. cRTN also achieves a reduction in energy costs by resolving the issue of rounding errors reported in legacy models.

0.65

Industrial Load Modeling and Optimization for Market-Based Interaction with Power Systems

eess.SY ·2026-08-15 ·Ruike Lyu
similarity 0.54
Abstract · PhD thesis, Tsinghua University, June 2026, 176 pages

The transition toward a renewable-dominated power system increases the flexibility needed to balance net-load variations. Industrial loads account for over 40% of the world's electricity consumption and can shift large amounts of demand through automated production scheduling. However, making industrial processes a dependable flexibility resource for power systems remains challenging because industrial process constraints are non-convex, equipment parameters are often private, and device-level models of thousands of facilities are too detailed for aggregator and power-system optimization. This dissertation builds computationally efficient methods for modeling and optimizing industrial flexibility for power-system interaction. Specifically, this dissertation uses smart meters as the external measurement interface and maps industrial process constraints into a concise flexibility space for power-system operation. The resulting chain of mechanism modeling, parameter identification, constraint dimension reduction, and optimal decision-making makes industrial-load participation computationally tractable while retaining precise process models for final execution.

0.10

Decision-Focused Learning via Neural Optimization Layers for Battery-Assisted Grid-Import Smoothing in AI Data Centers

eess.SY cs.LGmath.OC ·2026-11-10 ·Xinda Zheng, Canchen Jiang, Frits de Nijs, Edward Lam, Markus Wagner
similarity 0.53
Abstract

Rapid AI data-center power fluctuations challenge grid integration. Sustained grid-import smoothing requires allocating limited battery power and energy under uncertain demand. We formulate risk-aware BESS scheduling that coordinates advance reserve commitments and demand-responsive dispatch, accounting for operating costs, grid-ramp penalties, and their conditional value-at-risk. We develop battery scheduling decision-focused learning (BS-DFL) with a constraint-aware neural optimization layer trained directly from this objective without optimal-solution labels. The trained layer is then frozen to guide demand-predictor learning through scheduling costs and ramping risk, enabling solver-free rolling-horizon scheduling. In a 10,000-minute simulation using loads derived from measured AI workloads, BS-DFL reduces mean absolute minute-to-minute grid-import changes by 71.70% and total scheduling cost by 18.01% relative to an MSE-trained predictor coupled with a mixed-integer linear programming solver, with an average decision time of 18.77 ms.

0.26