CS Paper Radar

A comparative study on the accuracy & repeatability of mobile robotic platforms for the delivery of precision NDE measurement

SeyedMohammadAmin Nabi Pour, S. Gareth Pierce, Randika Vithanage, Ehsan Mohseni, David Carswell, Matthew Shields

cs.RO ·submitted 2026-09-03 13:02 UTC · v1

Abstract

Mobile robotic platforms offer a flexible alternative to fixed manipulators for non-destructive evaluation (NDE) of large aerospace structures, but their base-positioning accuracy and how that accuracy should inform deployment have not been assessed under a common, externally referenced protocol. This work presents a laser tracker-based evaluation workflow (ground truth approximately 6 micrometers) that measures the static and segmented trajectory positioning accuracy of five commercial mobile platforms (KUKA KMP-1500, KUKA KMR, MiR250, Boston Dynamics Spot, Clearpath Husky) under a common protocol. A coupled multi-corner calibration recovers the laser-to-robot transformation and reflector offsets; ordinary least squares over all poses is used, with robust estimation retained only as a blunder check. Static positioning accuracy ranged from a median of 8.2 mm (KMP-1500) to 63.5 mm (Spot), with the wheel-odometry-only Husky uncalibratable. Dynamic path following was characterised by cross-track error; the component was insensitive to temporal alignment, which ranged from 6.9 mm (KMP-1500) to 112.1 mm (Spot). Both accuracy and calibratability tracked localisation capability, from the newest LiDAR SLAM platform to map-free visual odometry. No configuration meets the 0.2 to 1.0 mm aerospace NDE tolerance from the base alone; the results are framed as a design input that sizes the supplementary sensing each platform requires: roughly one order of magnitude for the best platform and nearly two for the worst, providing a reproducible basis for platform selection rather than a feasibility claim.

Closest papers

Nearest neighbours by meaning across the whole index.

Laser-Tracker-Assisted Camera-to-Robot Calibration for Mobile Robots

cs.RO cs.CV ·2026-09-22 ·Jan A. Rudolph, Öykü Kandemir, Markus Ulrich
published similarity 0.64
Abstract · To appear in the proceedings of Forum Bildverarbeitung 2026

We present a laser-tracker-assisted hand-eye calibration method for camera-equipped mobile robots. The method combines laser-tracker-based 3D metrology with camera-based 2D observations. Building on our previous laser-tracker-assisted camera-to-robot calibration method for ground-observing mobile robots, we present a generalized formulation for calibrating the camera pose in the coordinate system of tracker-localized mobile robots. The new approach relaxes assumptions of our previous method on robot and camera configuration by chaining multiple calibration targets resulting in a more general approach supporting various camera-equipped mobile robot systems.

0.29

Online Joint Calibration of Steering Offset and Planar LiDAR Extrinsics for Wheeled Mobile Robots

cs.RO ·2026-08-27 ·Subodh Mishra, Arindam Dhar, Suprotim Majumdar, Naveen Arulselvan
similarity 0.63
Abstract

Accurate steering sensing and LiDAR-to-vehicle extrinsics are crucial for reliable path tracking in warehouse mobile robots (WMRs); miscalibration often leads to snaking, weaving, and elevated cross-track error (CTE). In practice, steering ``zero'' is commonly set manually (e.g., eyeballing straightness via a PS4 joystick), while LiDAR extrinsics are assumed from CAD and may drift after maintenance. Such static, manual procedures frequently cause miscalibration in safety-critical environments. This paper presents an Extended Kalman Filter (EKF)--based method for online estimation of steering offset and planar LiDAR extrinsics within a bicycle-kinematics model, providing a principled alternative to manual calibration. Experiments on real datasets show that correcting steering offset reduces CTE substantially, validating the effectiveness of the proposed approach.

0.29

Marker-Constrained Pose-Graph Correction for Cross-Platform Georeferencing in GNSS-Denied Environments

cs.RO cs.MA ·2026-08-17 ·Marco Giberna, Jose Luis Sanchez Lopez, Holger Voos
published similarity 0.61
Abstract · 14 pages, 5 figures, 5 tables, submitted to SPIE Security + Defence conference

Autonomous operation in GNSS-denied environments requires heterogeneous mapping pipelines to maintain a consistent spatial reference. This paper presents a framework using camouflage-matched fiducial markers fabricated from Cholesteric Spherical Reflectors (CSRs) as pre-surveyed visual anchors. The anchors georeference both a lightweight LiDAR-odometry trajectory and a dense RTAB-Map reconstruction, allowing their outputs to be expressed in a common LUREF frame (geodetic coordinate reference system used in Luxembourg) without requiring GNSS measurements during operation. The method combines coarse similarity alignment with marker-constrained pose-graph optimization. We evaluate it using two handheld acquisition sessions with ground-level and elevated motion profiles emulating UGV and UAV operation. A single iMarker was relocated among six surveyed positions, with the first position revisited to quantify drift correction. Marker-anchor correction reduced revisit inconsistency by 97.9% and 99.1% for the UAV- and UGV-emulating sessions, respectively, and improved held-out anchor prediction compared with one-time alignment. Separately georeferenced dense reconstructions achieved a median cross-session nearest-neighbour distance of 58 cm without explicit cross-session registration. Marker processing operated in real time, while trajectory correction required less than 0.25 s per session. These results demonstrate a proof of concept for georeferencing lightweight odometry and dense reconstructions using visually unobtrusive, pre-surveyed anchors during GNSS-denied operation.

0.45

High-Precision Docking of Differential-Drive Mobile Robots Through LiDAR and Vision Collaboration

cs.RO ·2026-11-18 ·Zaide Zhang, Zheyuan Zhang
similarity 0.61
Abstract

Precise docking requires a differential-drive robot to correct lateral offset through coupled rotation and translation within a short approach distance. We combine global navigation with terminal control using complementary LiDAR and visual observations. A line fitted to the cabinet front gives normal distance and heading. An AprilTag identifies the workstation; intersecting its center ray with the LiDAR plane determines tangential position. Taught observations define the docking reference and can cancel repeatable fixed biases under unchanged mounting and geometry. Lateral pre-alignment and continuous visual servoing coordinate the approach, with predictive stopping to account for low-speed actuation lag. Across two sessions using the same navigation and docking code at five workstations on Robot 2, all 111 tasks completed, including 101 on the first attempt. Relative to the taught observations, onboard longitudinal, lateral and heading residual root-mean-square values were 1.51 mm, 5.93 mm and 0.238 degrees, respectively. Joint acceptance within plus or minus 10 mm per position axis and plus or minus 1 degree heading was 96.4% (107/111), or 95.5% (106/111) with a plus or minus 0.5 degree heading limit.

0.27

Distributed Relative Localization for Homogeneous Multi-Robot Systems through UWB Ranging and Limited Communications

cs.RO ·2026-10-08 ·Zhiqiang Cao, Ran Liu, Billy Pik Lik Lau, Chau Yuen, U-Xuan Tan
top venue similarity 0.58
Abstract · This paper has been published in IEEE/ASME Transactions on Mechatronics

Accurate and reliable relative localization is crucial for multi-robot applications like exploration, search, and rescue missions. LiDAR-based solutions offer high accuracy in localizing surrounding objects; however, distinguishing homogeneous robots with similar appearances remains challenging due to the lack of distinctive identification features. In this paper, we propose a fully distributed relative pose estimation approach by integrating LiDAR, UWB, and odometry measurements, allowing each robot to accurately and continuously localize its teammates without external infrastructure. Specifically, potential anonymous teammate robot clusters from LiDAR scans are tracked by a dynamic tracker. We then identify teammate robots from these tracked anonymous clusters using a joint matching strategy, ensuring reliable data association between robots and clusters. Finally, by combining the corresponding LiDAR observations, UWB ranging, and odometry measurements, each robot precisely localizes others while minimizing data exchange. The system requires only odometry data exchange through onboard UWB, eliminating the need for additional communication infrastructure like WiFi routers or mesh networks. Extensive simulation and real-world experiments demonstrate the effectiveness and reliability of the proposed relative localization approach.

0.38

DCLP++: Learning to Navigate with Footprint Clearance and Relative Motion

cs.RO ·2026-09-08 ·Shanze Wang, Wei Zhang
hot direction similarity 0.58
Abstract · 5 pages

We present DCLP++, a local navigation frameworkthat uses footprint clearance as the geometric basis for studying relative motion features in dynamic environments. Each valid LiDAR return is mapped to its shortest Euclidean distance from the filled robot footprint before reciprocal encoding, replacing distance from the sensor with distance to the occupied body. Radial measurementsor simulated planar relative velocities provide short-horizon features without static-dynamic labels in the policy input. A preliminary study uses a rectangular robot with a speed limit of 1 m/s among 20 moving obstacles. On 100 fixed validation tasks, two selected training seeds yield mean success rates of 42% with sensor rangeand 70% with footprint clearance after 200,000 environment steps.Motion variants show mixed additional gains. These results supportthe clearance-based observation in the evaluated setting; reliable motion benefits and transfer across robots require further evaluation.

0.52

Comparing Trajectories from Positions Alone: Curvature-Based Time Alignment and Drift Error Metric

cs.RO ·2026-09-14 ·Effie Daum, Daniele De Martini, Claire Dune, François Pomerleau
similarity 0.58
Abstract

In field robotics, acquiring independent large-scale reference trajectories more accurate than the evaluated estimates remains an open challenge. The domain is widely reliant on Absolute Trajectory Error (ATE) and Relative Pose Error (RPE), computed with automated tools, that rest on assumptions and evaluation parameters rarely made explicit. When unreported, the errors can be misleading and hinder fair comparisons. This paper introduces a trajectory-evaluation protocol for standardized and reliable accuracy assessment in state estimation, localization, and Simultaneous Localization And Mapping (SLAM). The approach combines a novel temporal alignment method based on curvature signals with an error metric normalized by travelled distance. We explicitly account for temporal synchronization, sampling alignment, and extrinsic calibration, quantifying their influence through a sensitivity analysis. The proposed protocol contributes to more rigorous, reproducible, and standardized trajectory evaluation.

0.45

CAPTURER: A Dexterous Aerial Manipulator for Dynamic and Precise Grasping across Diverse Environments

cs.RO ·2026-10-29 ·Meng Wang, Jindou Jia, Sicheng Zhou, Zeshuai Chen, Kexin Guo +2 more
similarity 0.58
Abstract

As a representative form of embodied robotic interaction, aerial grasping requires close coordination between the aerial platform and manipulator. Most existing systems perform aerial grasping with static or slowly moving targets under fixed scenarios. Dynamic and precise grasping across different conditions introduces additional challenges, including target motion, localization drift, dynamic coupling, and external disturbances. In this work, we present CAPTURER, a dexterous aerial manipulator for centimeter-level grasping across diverse environments. To achieve the challenging goal, we first develop an onboard perception system for state estimation and target detection. Drift correction and global pose transformation are introduced to improve target localization during flight. A cooperative motion planner is proposed to coordinate the mobility of the aerial platform with the dexterity of the manipulator according to the relative target state. To maintain grasping accuracy under disturbances, we design a disturbance-rejection controller to compensate for dynamic coupling, model uncertainty, and external disturbances. The capability of CAPTURER is validated through indoor and outdoor experiments with both static and moving targets. The results demonstrate that CAPTURER achieves centimeter-level grasping accuracy for a marker pen measuring only 1.5 cm in diameter at flight speeds exceeding 1.5 m/s.

0.24