CS Paper Radar

Comparative Performance of Graphene-Enabled Transmitarray Antenna and Reflectors for Wide-Angle Terahertz Beam Steering

Somayeh Komeylian, Truong Nguyen, Christopher Paolini

cs.NI ·submitted 2026-09-05 01:32 UTC · v1

Abstract

This work compares a hemispherical graphene-based transmitarray antenna with its planar reflector counterpart for wide-angle beam steering in the THz regime. The theoretical framework of the planar reflector is formulated and numerically evaluated, yielding an elevation beam-steering range of \pm60°. In contrast, the transmitarray extends the elevation steering range to \pm78° while maintaining full 360° azimuthal coverage. The planar reflector exhibits a larger HPBW variation of 26.48°, compared with 13.1° for the transmitarray, resulting in a broader reflected-beam distribution and reduced directional power density, directivity, and gain. Meanwhile, the transmitarray maintains a more stable and controllable beamwidth response with greater directional power concentration over a wide steering range. The performance advantages of the transmitarray are demonstrated through comparisons with experimental results reported in the literature for planar reflectors and antennas. We further provide a comprehensive assessment of the performance advantages of the transmitarray over planar configurations across the remaining metrics.

Comment
20 pages

Closest papers

Nearest neighbours by meaning across the whole index.

Active Hemispherical Metasurface Transmitarray Antenna for Wide-Angle 3D Beam Steering and Target Tracking

cs.NI ·2026-08-10 ·Somayeh Komeylian, Christopher Paolini
similarity 0.79
Abstract · 17 pages, 4 figures

A stacked multilayer hemispherical graphene-based transmitarray antenna operating at 250 GHz is developed to achieve wide-angle 3D beam steering. This work presents the first fully automated CST Studio Suite macro for constructing the multilayer hemispherical geometry and configuring 121 independently tunable graphene sectors. Numerical results confirm that the integration of voltage-controlled graphene sectors with FCC gold patches enables wide-angle beam steering, achieving an elevation scanning range of -78° to 78° in θ and full 360° azimuthal coverage while maintaining stable radiation characteristics and broadband impedance matching (|S11| < -10 dB) with a relative bandwidth of 40%. The antenna achieves a directivity range of 11.38 - 14.72 dBi and an SLL range of -6.8 to -9.8 dB across all investigated steering directions. It also maintains high antenna efficiencies from 71% to 80% with a 5% degradation due to imperfections across the entire scanning range, making it a promising candidate in practical moving-target-tracking applications.

0.10

A Frequency-Space Terahertz Transceiver Chip for Multi-Agent Communications and Spatial Awareness

eess.SY physics.app-ph ·2026-08-12 ·Xiaoyue Xia, Zhicheng Lin, Hao Guo, Siran Wang, Jingyuan Zhang +5 more
similarity 0.56
Abstract

Future indoor embodied-intelligence systems require scalable hardware platforms that support both high-capacity multi-agent connectivity and mutual spatial awareness. The terahertz (THz) spectrum offers abundant bandwidth and inherent spatial selectivity for integrated sensing and communication (ISAC); however, conventional phased arrays and programmable metasurfaces rely on dense beamforming networks, element-level control, or external THz illumination, making scalable multibeam operation challenging. Here, we report a fully integrated 208-258GHz 65-nm CMOS THz transceiver chip that monolithically integrates broadband front ends with heterogeneous leaky-wave metasurface (HLM) apertures within a 1.5mm by 4.9mm area. The HLM generates strongly dispersive leaky modes, enabling 75 degree frequency-controlled beam scanning with only four meta-atoms. Co-design of frequency-domain and spatial-domain mixing achieves spectrally clean frequency-to-space mapping for spatial-frequency division multiple access (SFDMA) communication. The THz chip demonstrates multi-agent simultaneous transmission and reception, two-dimensional localization, and sensing-enhanced communication, providing a scalable hardware platform for future THz embodied-intelligence networks.

0.34

A Sub-Aperture-Based Ray-Tracing Framework for Near-Field U-MIMO THz Communications

eess.SP ·2026-10-28 ·Federico Ruggeri, Sotiris Droulias, Jiming Chen, Angeliki Alexiou, Jie Zhang
similarity 0.52
Abstract · 5 pages, 5 figures, submitted to EUCaP27

Terahertz (THz) communications are characterized by antennas with large apertures and extended near-field (NF) region, offering the opportunity to develop adaptable beam manipulation strategies, particularly related to ultra-massive MIMO (U-MIMO). While Ray-Tracing (RT) offers an attractive alternative to full-wave methods, conventional ray-based approaches are generally formulated under far-field (FF) assumptions. We propose a technique that extends RT to the NF regime, enabling ray-based NF characterization of transmitting arrays. We model the transmitting array as an antenna aperture and develop a RT framework that partitions the transmitting aperture into sub-apertures emitting FF contributions which can be propagated via geometric optics (GO). We develop a Ray-Launching algorithm based on the proposed framework and assess its beam-reconstruction accuracy against full-wave propagation. The results demonstrate that, through tunable aperture partitioning, the proposed approach can reproduce beam manipulation effects characteristic of NF U-MIMO THz communications using GO ray propagation.

0.35

Single-sided lens terahertz flat-top beam shaping in the Fresnel region

eess.SY physics.optics ·2026-11-04 ·Ehsan Imanbeygi, Mohammad Hossein Koohi Ghamsari, Mehdi Ahmadi-Boroujeni, Babak Honarbakhsh
published similarity 0.51
Abstract

In this paper, a novel, to our knowledge, analytical approach is introduced for the design of a single-sided plano-convex lens (PCL) capable of terahertz (THz) flat-top beam shaping in the Fresnel region. The lens profile, derived from geometrical optics principles, integrates collimating and beam-shaping functions into a single optical surface, thereby simplifying fabrication. The efficiency of the method is demonstrated by designing two PCLs that convert a divergent Gaussian beam from a monochromatic THz source (at 100 and 200 GHz) into flat-top beams with target radii of 400 and 500 mm at distances of 3 and 4 m, respectively. The resulting fields, evaluated through analytical, integral equation, and finite element techniques, are shown to be comparable to those produced by a conventional double-sided concave-convex lens. Furthermore, the sensitivity of the design to frequency and alignment variations is investigated, confirming the robustness of this single-curvature approach for integration into practical THz imaging systems.

0.67

Wideband Terahertz Pinching-Antenna Systems (PASS): Bandwidth Limits, Ergodic Rate, and Placement Optimization

eess.SP ·2026-11-16 ·Almutasem Bellah Enad, Chintha Tellambura, Zhiguo Ding
similarity 0.50
Abstract

Terahertz (THz) bands offer the vast bandwidth that sixth-generation (6G) networks demand, but their severe path loss makes bringing the radiator close to the user decisive. Pinching-antenna systems (PASS) do exactly this, turning path loss into a programmable parameter by sliding radiating points along a dielectric waveguide, which makes THz their native regime. That regime, however, is inherently wideband and the waveguide is dispersive, whereas every existing PASS analysis is single-frequency and assumes a non-dispersive guide. This paper develops the first wideband, dispersion-aware theory of PASS and uncovers a limitation intrinsic to the pinching mechanism. Because co-phasing by physical position equalizes path length only modulo a wavelength, a pinching array is inherently beam-squint limited, and we show its frequency response is a Dirichlet kernel with a closed-form coherence bandwidth and an irreducible dispersion floor that even true-time-delay (TTD) correction cannot remove. A single unifying law governs the behavior, in which array gain trades against both coherence bandwidth and spatial robustness through one invariant that TTD correction breaks, reaching the floor with far fewer delay elements than a conventional array. We further characterize the wideband ergodic rate under random user locations, show that molecular absorption acts as a deterministic taper that multiplies the squint, and derive a simple rule for the rate-optimal number of pinches. Finally, by exploiting the integer structure of co-phasing, we recast the non-convex placement problem as a mixed-integer program that can be solved exactly in polynomial time. Together, these results move PASS from the narrowband, dispersion-blind setting to the wideband, dispersive regime that THz operation actually requires.

0.25

Geometry-based Efficient Airy Beam Training for Quasi-LoS in Terahertz Near-field Communications

eess.SP ·2026-11-11 ·Wenqi Zhao, Chong Han
similarity 0.49
Abstract

With enlarged antenna apertures in Terahertz (THz) communications, near-field propagation becomes increasingly dominant, highlighting quasi-line-of-sight (quasi-LoS) scenarios with partial blockage. Airy beams offer a promising solution through their curved trajectories, but existing training methods for unknown blockage rely on computationally intensive parameter searches or learning-based approaches. In this paper, we propose an efficient geometry-based Airy beam training framework for uniform linear array (ULA) and uniform planar array (UPA) systems. First, theoretical feasibility bounds under finite apertures are derived to eliminate infeasible codewords. A performance-oriented Slope-Depth Geometric Codebook (SDGC) is then developed using bending-direction probing and geometric sampling. To further reduce training overhead, a latency-oriented Bijective 1D Geometric Codebook (B1GC) is proposed by mapping blockage-avoidance waypoints to receiver targets, enabling one-dimensional search. For UPA systems, a hybrid focusing--Airy mode is introduced, using four probe beams to identify the blockage-avoidance dimension and bending direction, followed by Airy beam training and orthogonal near-field focusing. Simulations show that SDGC achieves 14.8 bit/s/Hz average spectral efficiency with 40.9\% lower training overhead than the hierarchical focusing--Airy codebook (HFAC), while B1GC reduces overhead by 87.1\% with comparable performance. The UPA results further demonstrate effectiveness under two-dimensional blockage.

0.24

Beyond Fresnel Approximation: Exact Airy Beamforming for Near-Field THz Communications

eess.SP ·2026-10-28 ·Fangjie Shen, Weidong Mei, Aoran Liu, Peilan Wang, Zhi Chen
similarity 0.49
Abstract

Line-of-sight (LoS) blockage can severely degrade the performance of conventional focused beams in terahertz (THz) communications. Recently, bending beams (e.g., Airy beams) have attracted increasing attention due to their ability to bypass obstacles by propagating along curved trajectories under near-field propagation conditions. However, existing Airy-beam designs in wireless communications often rely on the Fresnel approximation for the focal distance, which becomes inaccurate at large steering angles or short propagation distances. To address this limitation, this letter proposes a more accurate Airy beamforming design method based on the exact focal-distance expression and the corresponding caustic geometry. Specifically, we jointly optimize the bending curvature, virtual focal distance, and steering angle to maximize the received signal power subject to receiver-alignment and obstacle-avoidance constraints. To tackle the resulting non-convex problem, we first use geometric preprocessing to narrow the feasible range of the bending curvature. Then, a two-layer optimization framework is developed with the outer and inner layers optimizing the bending curvature and the other two parameters, respectively. Numerical results based on the cascaded geometrical and wave channel model demonstrate that the proposed method achieves higher received signal power than conventional Airy-beam designs and offers complementary advantages over conventional focused beams under different blockage ratios.

0.29

Empirical Analysis of Near-Field Beam Shaping for Blockage Events

eess.SP ·2026-09-23 ·Jy-Chin Liao, Volodymyr Vizitiv, Edward W. Knightly
similarity 0.48
Abstract · 12 pages, 10 figures, 1 table. Submitted to IEEE Transactions on Wireless Communications

Millimeter-wave (mmWave) to sub-terahertz (sub-THz) links can realize high data rates, yet are highly vulnerable to dynamic blockages due to high directivity, limited multipath, and dependence on line-of-sight (LoS) propagation. While structured and self-healing beams are promising solutions, it remains unclear how beam types perform under dynamic blockage. In this paper, we present an empirical analysis of structured near-field beams using two transmission policies. At one extreme, we study beam resilience without obstacle adaptation. At the other extreme, we empirically optimize beam parameters to study the limits of multiple beam types under idealized adaptation. We employ numerical analysis based on the angular spectrum method (ASM) and experimental validation using a sub-THz time-domain spectroscopy (TDS) platform to characterize beam performance over complete blockage events. For the scenarios considered, despite lacking self-healing, focused beams provide the strongest resilience when beam parameters are not adapted during a blockage event (i.e., when all beams are optimized only a priori). In contrast, when optimally adapted to obstacle position, curved beams provide the best performance. Lastly, although Bessel beams benefit from self-healing, this property alone can be insufficient to outperform optimized curved and focused beams. These findings provide guidance for blockage-aware beam selection and adaptation protocols.

0.27