CS Paper Radar

Active Hemispherical Metasurface Transmitarray Antenna for Wide-Angle 3D Beam Steering and Target Tracking

Somayeh Komeylian, Christopher Paolini

cs.NI ·submitted 2026-08-10 01:23 UTC · v1

Abstract

A stacked multilayer hemispherical graphene-based transmitarray antenna operating at 250 GHz is developed to achieve wide-angle 3D beam steering. This work presents the first fully automated CST Studio Suite macro for constructing the multilayer hemispherical geometry and configuring 121 independently tunable graphene sectors. Numerical results confirm that the integration of voltage-controlled graphene sectors with FCC gold patches enables wide-angle beam steering, achieving an elevation scanning range of -78° to 78° in θ and full 360° azimuthal coverage while maintaining stable radiation characteristics and broadband impedance matching (|S11| < -10 dB) with a relative bandwidth of 40%. The antenna achieves a directivity range of 11.38 - 14.72 dBi and an SLL range of -6.8 to -9.8 dB across all investigated steering directions. It also maintains high antenna efficiencies from 71% to 80% with a 5% degradation due to imperfections across the entire scanning range, making it a promising candidate in practical moving-target-tracking applications.

Comment
17 pages, 4 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Comparative Performance of Graphene-Enabled Transmitarray Antenna and Reflectors for Wide-Angle Terahertz Beam Steering

cs.NI ·2026-09-05 ·Somayeh Komeylian, Truong Nguyen, Christopher Paolini
similarity 0.79
Abstract · 20 pages

This work compares a hemispherical graphene-based transmitarray antenna with its planar reflector counterpart for wide-angle beam steering in the THz regime. The theoretical framework of the planar reflector is formulated and numerically evaluated, yielding an elevation beam-steering range of \pm60°. In contrast, the transmitarray extends the elevation steering range to \pm78° while maintaining full 360° azimuthal coverage. The planar reflector exhibits a larger HPBW variation of 26.48°, compared with 13.1° for the transmitarray, resulting in a broader reflected-beam distribution and reduced directional power density, directivity, and gain. Meanwhile, the transmitarray maintains a more stable and controllable beamwidth response with greater directional power concentration over a wide steering range. The performance advantages of the transmitarray are demonstrated through comparisons with experimental results reported in the literature for planar reflectors and antennas. We further provide a comprehensive assessment of the performance advantages of the transmitarray over planar configurations across the remaining metrics.

0.13

Dynamic Metasurface Antennas: From Programmable Microwave Hardware to Next-Generation Wireless Systems

eess.SP ·2026-09-24 ·Abdul Jabbar, William Whittow
similarity 0.45
Abstract

As wireless systems evolve toward 6G and beyond, antenna apertures are increasingly expected to become more programmable, multifunctional, and responsive to diverse communication, sensing, and imaging requirements. Dynamic metasurface antennas (DMAs) offer a promising hardware pathway toward this vision by integrating electronically addressable metamaterial elements within microwave and millimeter-wave (mmWave) radiating apertures. Unlike conventional phased arrays relying on dedicated phase-shifting networks, DMAs manipulate guided waves in microwave structures through electronically controlled resonant elements. In this way, DMAs offer phase-shifter-less beam-steering, multibeam radiation, and programmable wavefront control. This article explores state-of-the-art DMA technology from a microwave-engineering perspective, spanning guided-wave excitation, reconfigurable resonant meta-elements, microwave tuning technologies, RF-digital integration, and FPGA-controlled beamforming. Closely related electronically steered metasurface antenna architectures are also discussed within a unified microwave-hardware framework. Recent advances illustrating how guided-wave DMA hardware and high-speed electronics facilitate programmable communication, sensing, imaging, and space-time functionalities are reviewed. Key microwave design challenges toward wideband, scalable, and highly integrated DMA apertures are highlighted. Finally, emerging opportunities in satellite communications, near-field connectivity, fixed wireless access, wave-domain computing, and integrated wireless functionalities are explored as future directions for DMA technology. This article provides a unified microwave engineering perspective on the design, practical implementation, and emerging capabilities of DMAs as programmable front-ends for next-generation wireless systems.

0.26

A Frequency-Space Terahertz Transceiver Chip for Multi-Agent Communications and Spatial Awareness

eess.SY physics.app-ph ·2026-08-12 ·Xiaoyue Xia, Zhicheng Lin, Hao Guo, Siran Wang, Jingyuan Zhang +5 more
similarity 0.45
Abstract

Future indoor embodied-intelligence systems require scalable hardware platforms that support both high-capacity multi-agent connectivity and mutual spatial awareness. The terahertz (THz) spectrum offers abundant bandwidth and inherent spatial selectivity for integrated sensing and communication (ISAC); however, conventional phased arrays and programmable metasurfaces rely on dense beamforming networks, element-level control, or external THz illumination, making scalable multibeam operation challenging. Here, we report a fully integrated 208-258GHz 65-nm CMOS THz transceiver chip that monolithically integrates broadband front ends with heterogeneous leaky-wave metasurface (HLM) apertures within a 1.5mm by 4.9mm area. The HLM generates strongly dispersive leaky modes, enabling 75 degree frequency-controlled beam scanning with only four meta-atoms. Co-design of frequency-domain and spatial-domain mixing achieves spectrally clean frequency-to-space mapping for spatial-frequency division multiple access (SFDMA) communication. The THz chip demonstrates multi-agent simultaneous transmission and reception, two-dimensional localization, and sensing-enhanced communication, providing a scalable hardware platform for future THz embodied-intelligence networks.

0.34

Transmissive RIS-Assisted Vehicular Direct-to-Satellite Communications: Opportunities, Limitations, and Comparison with Phased Arrays

cs.IT cs.ET ·2026-08-29 ·Wali Ullah Khan, Abdullah Abdullah, Juan Andres Vazquez-Peralvo, Eva Lagunas
similarity 0.42
Abstract · 9, 2

This article studies transmissive reconfigurable intelligent surface (RIS)-assisted architectures. It compares them with electronically steered phased arrays for the deployment of vehicular direct-to-satellite (D2S) communications in future satellite networks. Rather than treating RIS as a direct replacement for phased arrays, we clarify the operating regimes in which RIS can serve as a low-power wavefront-shaping aperture and those in which phased arrays remain preferable because of their high gain and mature beam-tracking capability. Moreover, phased arrays can support multi-beam operation, which is particularly beneficial for dual connectivity and seamless handover. We distinguish analog, digital, and hybrid phased arrays, discuss the relationship between transmissive RIS and reconfigurable transmitarrays, and highlight practical profile, tracking, and link-budget constraints for mobile terminals. The comparison shows that passive RIS offers attractive power efficiency and aperture scalability, active RIS can partially improve the link budget, and phased arrays remain preferable for high-throughput.

0.13

A Sub-Aperture-Based Ray-Tracing Framework for Near-Field U-MIMO THz Communications

eess.SP ·2026-10-28 ·Federico Ruggeri, Sotiris Droulias, Jiming Chen, Angeliki Alexiou, Jie Zhang
similarity 0.41
Abstract · 5 pages, 5 figures, submitted to EUCaP27

Terahertz (THz) communications are characterized by antennas with large apertures and extended near-field (NF) region, offering the opportunity to develop adaptable beam manipulation strategies, particularly related to ultra-massive MIMO (U-MIMO). While Ray-Tracing (RT) offers an attractive alternative to full-wave methods, conventional ray-based approaches are generally formulated under far-field (FF) assumptions. We propose a technique that extends RT to the NF regime, enabling ray-based NF characterization of transmitting arrays. We model the transmitting array as an antenna aperture and develop a RT framework that partitions the transmitting aperture into sub-apertures emitting FF contributions which can be propagated via geometric optics (GO). We develop a Ray-Launching algorithm based on the proposed framework and assess its beam-reconstruction accuracy against full-wave propagation. The results demonstrate that, through tunable aperture partitioning, the proposed approach can reproduce beam manipulation effects characteristic of NF U-MIMO THz communications using GO ray propagation.

0.35

EM-Guided Graph Learning for Fluid Antenna Beamforming under Current-Domain Constraints

cs.IT ·2026-08-13 ·Yuanhui Wu, Hao Jiang, Zaichen Zhang
similarity 0.41
Abstract

Fluid antenna arrays (FAAs) reconfigure a finite set of radiating ports within a prescribed aperture. In compact apertures, however, channel-driven placement may cluster ports, strengthen mutual coupling, degrade radiation conditioning, increase source-voltage demand, and produce uneven current loading. This paper studies downlink multi-user beamforming with jointly optimized port placement and current-domain transmission. An electromagnetic-guided graph network predicts port layouts from channel observations and refines them using geometric and mutual-impedance information. The training objective jointly considers communication performance and electromagnetic feasibility, while a common evaluation procedure is applied to all methods. The results show that, under a common feasibility standard, the proposed method provides a controllable tradeoff among communication rate, current loading, and configuration latency.

0.32

One-Shot Beam Tracking for Stacked Intelligent Metasurfaces-Assisted LEO Broadcasting

eess.SP cs.IT ·2026-10-04 ·Chandan Kumar Sheemar, Giovanni Iacovelli, Sourabh Solanki, Wali Ullah Khan, Symeon Chatzinotas
similarity 0.40
Abstract

This letter develops a physics-informed one-shot beam tracking method for stacked intelligent metasurface (SIM)-enabled low-Earth-orbit (LEO) links with $K$ users and an $L$-layer SIM with $N$ meta-atoms per layer. The predictable orbital motion is propagated through the line-of-sight (LoS) geometry to forecast the finite-interval variation of the user signal-to-noise ratio (SNR) profile, and an analytical multilayer Jacobian relates this variation to the $LN$ SIM phase coefficients. Beam tracking is formulated as normalized SNR-profile preservation and solved through a single regularized Gauss--Newton correction that requires one Jacobian evaluation and a $K\times K$ linear solve, thereby avoiding iterative reoptimization. A tracking-error bound separates the regularization residual from the nonlinear Taylor remainder and establishes a second-order local error under a full-row-rank Jacobian. Numerical results show that the proposed method retains approximately $94\%$ and $92\%$ of the iterative-reoptimization rate for $L=2$ and $L=4$, respectively, while running about $350\times$ and $260\times$ faster at $N=225$, and confirm the predicted second-order residual error behavior.

0.46

Movable-Element STAR-RIS for 6G: From Programmable Propagation to Programmable Geometry

cs.ET ·2026-09-08 ·Wali Ullah Khan, Muhammad Adil
similarity 0.40
Abstract · 8, 4

Reconfigurable intelligent surfaces (RISs) make the wireless propagation environment programmable, while simultaneously transmitting and reflecting RISs (STAR-RISs) extend this capability to users located on both sides of a surface. However, conventional STAR-RIS architectures retain a fixed physical geometry after deployment. Movable-element STAR-RIS (ME-STAR-RIS) introduces an additional spatial degree of freedom by allowing the surface elements to reposition within prescribed regions while maintaining electronic control of their transmission and reflection responses. This combination of electromagnetic and geometric reconfiguration can alter propagation distances, multipath combinations, spatial correlation, interference, near-field focusing, and sensing geometry. This article presents a system-level perspective on ME-STAR-RIS through the concept of programmable geometry. We discuss its operating principles, movement architectures, and promising applications in communications, security, near-field systems, sensing, and high-mobility networks. A representative case study comparing optimized fixed and movable STAR-RIS architectures illustrates measurable spectral-efficiency gains from limited local displacement and the resulting saturation behavior. Finally, key hardware, channel-acquisition, electromagnetic, energy, reliability, and control challenges are discussed toward practical ME-STAR-RIS deployment.

0.24