CS Paper Radar

Reconfiguring Sparse Apertures: Partial-Mobility Planar FAS for 2-D DOA Estimation

Xiaokai Song, Tuo Wu, Jie Tang, Maged Elkashlan, K. C. Ho, Kin-Fai Tong

eess.SP ·submitted 2026-09-06 04:28 UTC · v1

Abstract

Classical sparse arrays enlarge the sensing aperture under limited element and radio-frequency (RF) chain budgets, but their fixed geometries impose a persistent tradeoff between wide-sector identifiability and local angular resolution. This paper converts this static design into a two-state reconfigurable sparse aperture by allowing only part of a planar fluid antenna system (FAS) to move after an initial observation. A compact, Nyquist-spaced seed first provides an ambiguity-controlled acquisition geometry. The remaining fluid ports then move or switch to information-efficient refinement positions, and the measurements collected before and after reconfiguration are jointly processed. We formulate the receiver under fixed total numbers of ports and RF chains, a movement budget, and a common total-snapshot budget. A policy-level Fisher information matrix (FIM) identity accounts for the observation-dependent refinement geometry. For a single source, a relaxed planar D-optimal analysis gives the corner-favoring aperture law, while a finite-port certificate bounds the information retained under spacing, reachability, and partial-actuation constraints. For multiple sources, an aperture-and-conditioning surrogate generates feasible sparse layouts that are ranked and locally refined using the exact frame FIM with coarray, spacing, and movement regularization. Seed multiple signal classification (MUSIC) identifies a reliable angular basin, followed by joint concentrated-likelihood refinement over both states. Equal-budget simulations show that reconfiguring a sparse aperture converts available area and movement into lower angular error and retains much of the all-movable gain with fewer actuated ports. They also identify the operating boundary: if a full sparse aperture can remain permanently deployed, avoiding movement and snapshot splitting can be preferable.

Comment
14 figures, 2 tables

Closest papers

Nearest neighbours by meaning across the whole index.

Joint Channel Scanning and Geometry-Aware Codebook Design for Movable Antenna Arrays

eess.SP ·2026-11-03 ·Amna Irshad, Luca Antonelli, Vitaly Petrov, Luca Sanguinetti, Emil Bjornson
hot direction similarity 0.65
Abstract

Multiple-input multiple-output (MIMO) systems rely on spatial degrees of freedom, but fixed antenna geometries cannot adapt to propagation environments. Movable antenna (MA) systems address this by adapting antenna positions to the channel. In discrete MA architectures, active antennas are selected from candidate positions, requiring channel state information (CSI) at those positions. With limited radio-frequency (RF) chains, CSI is acquired through successive pilot rounds, or antenna scanning, whose overhead can offset reconfiguration gains. This paper studies discrete MA geometry optimization when only a fraction of candidate positions is scanned. We show that a geometry-aware (GA) steering-vector codebook, constructed from the actual antenna coordinates, reconstructs channels more accurately than a conventional discrete Fourier transform (DFT) codebook when the optimized array departs from a uniform grid. We then show that the scanning fraction required to approach full-scan sum-rate performance depends on the CSI acquisition method: least-squares (LS) estimation degrades sharply under sparse scanning, while codebook-based acquisition remains robust. We also propose an adaptive scanning procedure that probes candidates in batches and stops automatically using the acquired pilots, avoiding a preset scanning budget. Finally, we quantify sum-rate losses as users move from their initial positions and evaluate recovery through re-scanning and geometry re-selection, relative to fixed-aperture operation with outdated or fresh CSI. Numerical results show that adaptive scanning achieves about 99.5% of the full-scan sum rate while scanning only 11% of candidate positions.

0.33

Two-Stage Refinement Sparse Channel Estimation for Reconfigurable Intelligent Metasurface Antenna (RIMSA) Massive MIMO

cs.IT ·2026-09-19 ·Yakun Ma, Hui-Ming Wang, Jiaping He, Qingli Yan
top venue similarity 0.65
Abstract

To meet the increasing demands for high data rates and large capacity, next generation wireless communication systems require transceivers equipped with a large number of antennas. Massive multiple-input multiple-output (MIMO) with metasurface antennas has emerged as a promising solution. In this paper, we investigate the channel estimation problem for the emerging reconfigurable intelligent metasurface antenna (RIMSA) array systems. Specifically, we develop a two-stage refinement (TSR) channel estimation method based on the compressed sensing (CS) principle. In the first stage, we exploit the antenna structure of RIMSA to receive pilots by setting identical phase response vectors across all RIMSAs. In this manner, the coherence of the measurement matrix under the CS framework is reduced and the channel estimation performance is improved. However, this special design introduces channel direction-of-arrival (DoA) estimation ambiguity and yields an ambiguous candidate DoA set. In the second stage, we optimize the phase responses of the metamaterial elements to resolve the ambiguity and accurately estimate the DoAs and channel coefficients. Overall, the estimation accuracy is improved in the first stage at the cost of ambiguity, and this ambiguity is eliminated in the second stage. We illustrate the performance advantages of the TSR method by presenting the numerical results and comparing it with the existing methods.

0.28

Fluid Antenna Array-Enabled Near-Field ISAC: Joint Port Position Optimization and Transmit Beamforming Design

cs.IT ·2026-11-02 ·Wangqi Shi, Zhentian Zhang, Hao Jiang, Zaichen Zhang, Kin-Fai Tong
similarity 0.64
Abstract

Fluid antenna systems (FASs) have shown that activating a single port from a densely packed antenna array can yield spatial diversity comparable to that of tens of independent antennas, a property that has substantially improved communication reliability and efficiency. The fluid antenna array (FAA) extends this concept to multi-port configurations while avoiding complex multi-dimensional spatial correlation, and offers significant geometrical flexibility under a finite aperture and a limited port budget. These attributes motivate environment-adaptive array geometry for sensing in integrated sensing and communication (ISAC) systems. Although this flexibility enables adaptive array geometries that exploit near-field distance-angle information, improving multi-parameter target estimation under communication and deployment constraints remains challenging. In this paper, we propose a planar FAA-assisted near-field ISAC framework for multiuser communication and target sensing. Specifically, we derive the Fisher information matrix (FIM) and the corresponding Cramér-Rao bound (CRB) for the joint estimation of target range, zenith angle, azimuth angle, and radial velocity. Based on the derived CRB, we jointly optimize the FAA port positions and transmit beamforming to improve sensing accuracy while satisfying communication signal-to-interference-plus-noise ratio (SINR), transmit power, and physical deployment constraints. To solve the resulting non-convex problem, we develop a two-stage alternating optimization algorithm, in which transmit beamforming is optimized through semidefinite relaxation (SDR), while FAA port positions are successively optimized through discrete search and continuous refinement. Simulation results indicate that the proposed algorithm achieves favorable sensing performance while maintaining a reasonable computational cost.

0.16

Flexible Beamforming via Fluid Antenna Array: From Discrete to Continuous Array

cs.IT ·2026-10-25 ·Jingyuan Xu, Yuanhui Wu, Zhentian Zhang, Zaichen Zhang, Tuo Wu +4 more
similarity 0.63
Abstract · 12 pages, 9 figures. Submitted to IEEE Transactions on Wireless Communications

Fluid antenna arrays (FAAs) reconfigure their effective aperture by activating radiation ports from a dense set of candidate positions within a finite physical region, thereby offering geometry diversity beyond conventional fixed arrays. This paper studies arbitrary-direction far-field beam synthesis with a planar FAA. Since a fixed array adapts its beamforming weights on a predetermined spatial sampling structure, its ability to match desired beam patterns is limited when both the aperture and the number of active elements are constrained. To exploit the geometry diversity of the FAA, we propose a coarse-to-fine scheme that couples discrete port selection with continuous joint refinement. In the coarse stage, a fast Fourier transform (FFT) based phase retrieval step converts the amplitude-only beam specification into an aperture-compatible complex target, after which an FFT-tailored greedy method selects the active ports and least squares initializes their complex weights. In the fine stage, a projected adaptive moment estimation procedure jointly refines the continuous port positions and beamforming weights while enforcing the minimum interelement spacing. For the evaluated two-beam configuration, the proposed scheme increases the mainlobe energy fraction from 35.73% to 48.92% and reduces the peak sidelobe level from -2.30 dB to -3.83 dB relative to a fixed array with the same aperture and active-port count.

0.30

CSI Reconstruction in Fluid Antenna Systems Without Spatial Covariance Priors

cs.IT ·2026-08-10 ·Zhentian Zhang, Kaitao Meng, Tuo Wu, Kai-Kit Wong, Hao Xu +4 more
similarity 0.62
Abstract

Fluid antenna systems (FASs) exploit many candidate ports for spatial diversity, but hardware constraints allow channel observations at only a few active ports. Whether full-port CSI can be recovered without pre-acquired channel statistics remains open. Under the Clarke isotropic scattering model, we show that the channel lies in a low-dimensional spatial modal subspace determined by the scattering environment rather than the total port count. Consequently, recovery becomes feasible when the number of observed ports reaches the modal dimension (i.e., $M\geq r$), even when $M\ll N$. We further establish a sharp feasibility threshold: reliable recovery is impossible below this dimension regardless of SNR, whereas accuracy improves with additional observations above it. By decomposing the recovery error into modal truncation, estimation, and learning components, we derive explicit tradeoffs among RF chains, pilot overhead, transmit power, and training data. These results enable scalable prior-free full-port CSI recovery with few active ports.

0.04

Fluid Antenna Channel Reconstruction with Non-Negative Least Square Detector

eess.SP cs.IT ·2026-08-24 ·Yang Chen, Jian Dang, Zaichen Zhang
similarity 0.61
Abstract

Reconstructing the full-aperture channel of a fluid antenna system (FAS) from a few activated ports requires inferring unobserved responses from limited spatial samples. This paper proposes a covariance-domain FAS channel-reconstruction method based on nonnegative least squares (NNLS). A nonuniform port arrangement constructs a difference coarray with an enlarged aperture. Vectorizing the sample covariance maps the physical array to a virtual steering dictionary, and the resulting complex covariance-fitting model is recast as a strictly equivalent real-valued NNLS problem. A projected-gradient iteration initialized at zero estimates the nonnegative angular-occurrence coefficients, and the L_s strongest well-separated peaks yield the angles of arrival (AoAs). Simulations show that the proposed FAS-NNLS estimator exploits the enlarged virtual aperture and achieves lower AoA mean squared errors than uniform linear array (ULA) multiple signal classification (ULA-MUSIC) and ULA estimation of signal parameters via rotational invariance techniques (ULA-ESPRIT). Its non-line-of-sight (NLoS) path accuracy matches FAS covariance matching pursuit, while its line-of-sight (LoS) estimation is significantly improved.

0.17

Sparse Rotatable Arrays (SRA): Unifying Array Aperture and Antenna Directivity for Wireless Communications

cs.IT ·2026-08-12 ·Ailing Zheng, Qingqing Wu, Xiyuan Liu, Wen Chen
similarity 0.61
Abstract

Sparse rotatable array (SRA) is a novel reconfigurable antenna architecture that jointly exploits sparse aperture configuration and antenna directivity to enhance spatial resolution for future wireless communications. Specifically, SRA activates a subset of rotatable antennas over a large candidate aperture and adjusts their boresight directions, thereby creating a directionally selective sparse aperture with reduced hardware requirements and enhanced spatial flexibility. In this paper, we investigate an SRA-aided multi-group communication system, where users are organized into spatial groups with different service requirements. We develop a group-aware SRA design framework by jointly optimizing the sparse-aperture allocation, RA orientations, and transmit beamforming to maximize the weighted max-min signal-to-interference-plus-noise ratio (SINR). Then, we characterize the operating principles of SRA and reveal that sparse aperture improves spatial resolution by enlarging the effective array aperture, while antenna directivity suppresses inter-group coupling through directional control, thereby enabling simplified group-wise beamforming structures. Guided by these insights, we develop a structured low-complexity alternating optimization algorithm that embeds a closed-form projected group-center RA orientation rule into the sparse-aperture allocation and beamforming design. The proposed algorithm combines analysis-guided initialization, sampled multi-start antenna-allocation search, and bisection-based second-order cone programming for beamforming. Numerical results show that the proposed SRA design closely approaches fully-shared SRA benchmarks and significantly outperforms compact subarray and omni sparse-array schemes.

0.04

Model-based learning for DoA estimation and array calibration via continuous sparse recovery

cs.AI cs.LG ·2026-11-06 ·Baptiste Chatelier, José Miguel Mateos-Ramos, Vincent Corlay, Matthieu Crussière, Christian Häger +3 more
similarity 0.60
Abstract

Direction of arrival (DoA) estimation, a classical signal processing problem, has experienced renewed interest with the advent of integrated sensing and communication (ISAC). While decades of research have yielded highly accurate DoA estimators, hardware impairments have frequently been neglected, despite degrading both DoA estimation accuracy and downstream communication performance in ISAC systems. This work introduces a joint array calibration and DoA estimation method based on the simultaneous orthogonal matching pursuit (SOMP) algorithm, following the model-based machine learning paradigm. The proposed method enables the calibration of antenna arrays subject to severe gain-phase and antenna location impairments through projected gradient descent (PGD), with either supervised or unsupervised objectives. Additionally, DoA estimation is enhanced by extending SOMP to continuous dictionaries via PGD refinement steps. Simulation results demonstrate that the proposed method enables efficient hardware impairment compensation, even without labeled samples, while outperforming conventional sparse recovery and subspace-based DoA estimation baselines.

0.24