CS Paper Radar

Moment Matching for Descriptor Systems: A Möbius Mapping Approach

David Militaru, Denisa Jungheatu, Andrei Sperilă, Tudor C. Ionescu

eess.SY ·submitted 2026-09-06 16:37 UTC · v2
unusual

Abstract

For a class of single-input single-output systems described by proper or improper transfer functions, we propose moment-matching procedures applicable in both continuous- and discrete-time contexts. The resulting technique is not only more flexible and reliable than other procedures which are currently available in literature, but it also enables the placement of constraints on the reduced-order model's poles and zeros. This constraint-based feature, hitherto available only for continuous-time state-space systems, is illustrated via a numerical example based on a practical problem from literature.

Comment
9 pages, 1 figure with 3 subfigures

Closest papers

Nearest neighbours by meaning across the whole index.

Computing Scaled Relative Graphs of Discrete-Time LTI Systems: A Frequency-Domain Approach

eess.SY ·2026-09-29 ·Guoming Shi, Fredy Ruiz
similarity 0.50
Abstract

The scaled relative graph (SRG) represents the joint gain and phase properties of an input--output operator in the complex plane. This paper characterizes the SRG closure of causal, stable, square discrete-time linear time-invariant (LTI) systems on one-sided square-summable sequences. The Beltrami--Klein image of this closure equals the convex hull of the numerical ranges of the transformed frequency-response matrices. For real-coefficient single-input single-output systems, this yields the hyperbolic convex hull of the discrete-time Nyquist locus. The proof addresses the Hardy-space restriction imposed by one-sided inputs, which excludes persistent sinusoids, by replacing them with explicitly constructed finite-duration sinusoids. This construction shows how points in frequency-wise SRGs arise as limits of operator SRG points generated by admissible inputs. The characterization enables model-based computation of the closure from a state-space realization using frequency-response evaluations, numerical ranges, and planar convex hulls, without solving linear matrix inequalities.

0.51

Feasibility of Simultaneous Input-Output Constraints for Tracking in a Class of LTI Systems: Part II

eess.SY ·2026-10-03 ·Junhyeok Yoon, Alan B. Cao, Heather Hussain, Anuradha M. Annaswamy
similarity 0.46
Abstract

This paper illustrates the properties of a new CBF-governor that enables simultaneous input and output constraint satisfaction for a class of multi-input linear time-invariant systems with state feedback and integral action. This governor is designed so as to modify the reference command while preserving the nominal feedback controller. Necessary and sufficient conditions are derived in a companion paper under which the governor is shown to be feasible at every state of a prescribed operating set and ensures simultaneous input and output constraint satisfaction, forward invariance, and bounded closed-loop solutions. These theoretical results are illustrated in this paper through several numerical examples. In each of these examples, we show how the goals of the CBF-governor are met and corroborate the corresponding necessary and sufficient condition. The computational burden associated with the proposed CBF-governor is also articulated, with its online component comparable to either that of a QP solver or determined using an exact closed-form solution. The offline component is related to the checking of the SIOCF condition which is of $O(N)$.

0.16

Feasibility of Simultaneous Input-Output Constraints for Tracking in a Class of LTI Systems: Part I

eess.SY ·2026-10-01 ·Junhyeok Yoon, Heather Hussain, Anuradha M. Annaswamy
similarity 0.45
Abstract · 14 pages, submitted to ACC 2027; v2: revised abstract, added the arXiv number of the companion paper (Part II, arXiv:2610.04742)

This paper addresses simultaneous input and output constraint satisfaction for a class of multi-input linear time-invariant systems with state feedback and integral action. A control barrier function (CBF)-based governor modifies the reference command while preserving the nominal feedback controller. Necessary and sufficient conditions are derived under which the governor is feasible at every state of a prescribed operating set and ensures simultaneous input and output constraint satisfaction, forward invariance, and bounded closed-loop solutions. The paper also shows that these conditions need not be met for certain choices of the CBF governor parameters due to conflicts between input and output constraints. A systematic design procedure is proposed that first searches for feasible free parameters and, if necessary, proposes a relaxation in the input constraint that restores feasibility. A companion paper provides numerical examples and counterexamples illustrating these results.

0.38

Exact Decisions and Certified Values in $L_\infty$-Norm Computation from State-Space Representations

cs.SC math.OC ·2026-11-11 ·Alban Quadrat, Fabrice Rouillier, Grace Younes
benchmark similarity 0.43
Abstract · 6 pages, 1 table. Submitted to the European Control Conference (ECC 2027)

Computing the $L_\infty$-norm of a time-invariant linear ordinary differential control system is a routine task in robust control, usually delegated to floating-point routines that perform well on most practical systems. Behind the numerical value, however, lies a discrete decision: whether a pole lies on the imaginary axis, and whether a mode of a realization is actually a pole of the transfer matrix. Floating-point arithmetic can only replace this decision with a tolerance. This paper explains, for a control audience, what reliable symbolic-numeric computation offers for this problem: exact arithmetic where a decision has to be made, and certified enclosures where a value has to be computed. We show how the problem is turned into a small polynomial system directly from state-space data, how this system is solved in practice, and what it costs. A benchmark on the {\tt COMPleib} library and on families of systems with known norms shows that two standard numerical routines err in opposite directions on the imaginary-axis decision, and never on the same system, while the certified method decides it correctly on every instance tested and computes the norm at a cost comparable to that of the numerical routines on most systems. We conclude with practical guidelines for users of numerical tools.

0.41

Subspace Based Identification of Errors-in-Variables Linear Descriptor Systems

eess.SY ·2026-08-31 ·Deepanjhan Das, Shankar Narasimhan
published similarity 0.43
Abstract · Accepted for publication in the 8th International Symposium on Advanced Control of Industrial Processes (IEEE AdCONIP 2026), University of A…

The identification of linear descriptor systems (DAEs) from noise-corrupted data makes two critical assumptions: requirement of an \textit{a priori} classification of variables into inputs and outputs, and a pre-specified structural assumption with respect to the index of the system. This paper proposes a data-driven methodology for identifying index-0 and index-1 DAEs within an errors-in-variables framework. We extend a subspace-based iterative PCA (SMI-IPCA) approach to the behavioral setting, treating all measured variables as a unified augmented vector to avoid classification bias. This method enables systematic estimation of the noise variances, the number of algebraic and differential output variables, while simultaneously identifying the algebraic constraints and kernel representation of the dynamic system corresponding to its minimal realization order without prior structural knowledge. Simulation studies on index-0 and index-1 systems demonstrate the effectiveness of the proposed approach and its practical applicability.

0.55

Multivariable Geometric Laplace Transform and Fault Detection in Distributed-Converter Lines

eess.SY eess.SP ·2026-09-02 ·Francisco Manuel Arrabal-Campos, Francisco G. Montoya, Santiago Sánchez-Acevedo, Raymundo E. Torres-Olguin, Alfredo Alcayde
code/data similarity 0.42
Abstract · 56 pages, 13 figures, 5 tables. Code and data available at https://github.com/fmarrabal/geo-laplace-distributed-converters

Monitoring a DC line with many distributed power converters is a genuinely spatio-temporal problem: the information about a localized fault travels along the whole conductor and reaches a few measurement points mixed with the dynamics of the line itself. This paper develops a two-dimensional geometric Laplace transform (t,x) -> (s_t,s_x) over a commutative subalgebra of the geometric algebra Cl(4,0), isomorphic to Segre's bicomplex numbers, in which two bivectors B_t and B_x act as independent imaginary units for the temporal and the spatial phase. Because the two phases live in algebraically distinguishable planes, a fault at position x_f leaves a transformed residual that factorizes as F_f(s_t) e^{-s_x x_f}: its temporal nature stays in the first factor and its location can be read as a geometric argument of the second. On this representation we build a transmission-line model of the converter line and its space-time dispersion relation, a distributed control by admittance shaping, including an exact treatment of discrete converter sites (spatial sampling, aliasing, and a per-converter droop realization that is exact on the sub-Nyquist band), and a fault diagnosis chain that detects, localizes and classifies injection-loss, shunt, sensor and local-controller faults, extends to multiple simultaneous faults with automatic order selection, and distinguishes the outage of a plant from a cable defect. As an integral object the transform is known in bicomplex analysis, and with a single independent variable it reduces to the complex Laplace transform; the contribution lies in its geometric embedding and in its operational use for fault diagnosis in distributed-converter networks. All results are reproduced by an accompanying open implementation.

0.32

Beyond Yes or No: Grading Observability of Power System Dynamic States with Symbolic Coefficients

eess.SY ·2026-11-11 ·Akhila Kandivalasa, Marcos Netto
unusual similarity 0.40
Abstract

Graph-based observability analysis runs in seconds where Lie-derivative tests take hours, but it answers only one question: is the system observable or not. It cannot say how well a given set of measurements supports state reconstruction. This paper extends the graph-based approach with symbolic observability coefficients computed from a symbolic Jacobian of the state-space equations, in which every dependency is classified as constant, nonlinear polynomial, or rational. We show that the coefficient tracks the analytical observability determinant of the Lie-derivative approach: it is zero when the determinant vanishes, lies strictly between zero and one when the determinant depends on the state, and equals one when the determinant is a nonzero constant. We apply the method to a seven-state synchronous machine and to the 21-state Western System Coordinating Council nine-bus system under several synchrophasor measurement configurations. On the nine-bus system, the coefficient grows from 0.0952 with one PMU to 0.1905 with two and 0.2857 with three, and the whole analysis runs in under five seconds. Configurations with the same number of PMUs receive the same coefficient, yet an unscented Kalman filter estimates the states with different accuracy for each. The symbolic coefficient therefore grades measurement sets beyond identifying root strongly connected components, while telling PMU locations apart still requires the numerical parameters of the system.

0.25

The geometric Laplace transform: Definition, existence and properties of the Geometric Algebra Laplace transform

eess.SY math.OC ·2026-08-18 ·Manel Velasco, Arnau Dòria-Cerezo, Isiah Zaplana
unusual similarity 0.40
Abstract · 42 pages, 0 figures

Recent publications have started to explore the application of Geometric Algebra (GA) to the modeling, analysis and control of dynamical systems and, in particular, electrical circuits. Since a crucial element there is to transform the ordinary differential equations governing the dynamical system which models the systems' behavior from the real domain to the Laplace domain, a definition of the Laplace transform in GA is needed. In the present work, we extend previous works dealing with extension to some hiper-complex algebras by introducing a definition of the Laplace transform within the framework of Geometric Algebra (GA). In particular, our definition and its properties are applicable to geometric algebras with signature lower or equal than 5.

0.31