CS Paper Radar

3D Euler-Angle Orientation Control for Two-Ray Fading Mitigation in Maritime Air-to-Sea Communications

Mohammed Bajja, Abdoul Karim A. H. Saliah, Hajar El Hammouti, Daniel Bonilla Licea, Giuseppe Silano

cs.RO ·submitted 2026-09-10 12:42 UTC · v1
publishedbenchmark

Abstract

Maritime Air-to-Sea links are dominated by a line-of-sight ray and a sea-surface reflected ray whose destructive combination produces deep fades. Existing mitigation strategies optimize Unmanned Aerial Vehicle position or trajectory but leave attitude unexploited. This paper treats the full three dimensional attitude as a physical-layer control variable that shapes the two-ray interference through antenna phase-center displacement. Under small-angle and far-field assumptions, the constructive-interference condition reduces to an affine constraint in the Euler angles and admits a closed-form family of minimum-norm attitude candidates. A differentiable soft-minimum rule yields a smooth reference tracked by a constrained Nonlinear Model Predictive Control controller on a fully-actuated tilting multirotor. The proposed scheme increases cumulative throughput by 11.4% over a pitch-only benchmark and 22.2% over a zero-orientation baseline, while preserving trajectory tracking and respecting actuator limits.

Comment
Accepted to the 2026 IEEE Global Communications Conference, GLOBECOM 2026

Closest papers

Nearest neighbours by meaning across the whole index.

Orientation-Aware Control and Trajectory Design for Aerial RIS-Assisted Wireless Communications

cs.NI cs.RO ·2026-09-19 ·Abdoul Karim A. H. Saliah, Hajar El Hammouti, Daniel Bonilla Licea, Giuseppe Silano
published similarity 0.59
Abstract · Accepted for publication in IEEE Transactions on Vehicular Technology. Copyright (c) 20xx IEEE. Personal use of this material is permitted. …

Aerial Reconfigurable Intelligent Surfaces (ARISs) can enhance wireless connectivity in obstructed environments by combining reconfigurable metasurfaces with aerial mobility. However, in practical deployments, the Reconfigurable Intelligent Surface (RIS) is rigidly mounted on a multi-rotor Unmanned Aerial Vehicle (UAV), which creates coupled position-orientation dynamics that directly affect communication quality. Since RIS performance is highly sensitive to orientation, point-mass or orientation-invariant models may lead to optimistic performance estimates. This paper proposes an orientation-aware ARIS framework that explicitly accounts for UAV dynamics, actuation limits, and orientation-dependent channels. The proposed approach combines a communications-guided reference trajectory planner with a Nonlinear Model Predictive Control for dynamically feasible trajectory tracking and favorable RIS orientation, while employing lightweight beamforming and RIS phase-shift updates. Simulations show that accounting for orientation improves user throughput by 13.77%, while the proposed joint communication updates improve network throughput by 28% over phase-shift-only optimization and by at least a factor of 2.5 over beamforming-only optimization. These results highlight the importance of orientation-aware modeling and joint communication-control design in ARIS-assisted wireless systems.

0.25

Exploiting UAV Attitude for Covert Communications: Dynamics-Consistent Trajectory-Attitude Co-Design

cs.IT ·2026-10-01 ·Jinpeng Xu, Lin Zhou, Xin Xie, Mengyuan Zhang, Jingjing Wang
theory similarity 0.59
Abstract · 13 pages, 8 figures. Submitted to an IEEE journal

Existing trajectory designs for covert communications with uncrewed aerial vehicles (UAVs) typically rely on point-mass kinematics, which overlook the inherent coupling between flight maneuvers and antenna orientation. Motivated by recent studies linking UAV acceleration to attitude, we investigate dynamics-consistent trajectory and attitude co-design for rotary-wing UAV covert communications. We consider a UAV equipped with a directional antenna transmitting confidential information to a legitimate ground receiver in the presence of a warden. The acceleration-induced reduced attitude of the UAV is explicitly modeled together with its impact on the attitude-dependent directional channel gain. To ensure covertness, we derive a per-slot constraint based on the Kullback--Leibler (KL) divergence at the warden. We then formulate a joint trajectory and attitude optimization problem to maximize the average achievable covert rate subject to covertness, motion, thrust-magnitude, attitude-smoothness, and acceleration-domain safety constraints induced by roll and pitch limits. The resulting problem is non-convex because the channel gains depend jointly on position, acceleration, and attitude. To solve it, we develop a minorization--maximization (MM)-based algorithm that constructs a concave lower bound on the transmission rate and a convex upper bound on the covert constraint at each iteration. We further extend the framework to imperfect attitude control and develop a robust design against attitude tracking errors caused by actuator limitations, sensor noise, and control delays. Numerical results demonstrate the effectiveness of the proposed dynamics-consistent design and highlight the benefit of jointly optimizing UAV trajectory and attitude for covert communications.

0.52

ISB-NMPC: Interception-Oriented Spherical-Bearing Nonlinear Model Predictive Control for Quadrotors

cs.RO ·2026-10-26 ·Li Hong, Linkai Liu, Xiangyu Ren, Shuli Lv, Chen Min +4 more
code/data similarity 0.57
Abstract · 9 pages, 10 figures, and 1 table. Submitted to IEEE/ASME Transactions on Mechatronics

Quadrotor interceptors equipped with strapdown cameras offer a low-cost solution for physically countering unauthorized UAVs. However, this configuration inherently couples vehicle maneuvering and camera pointing, creating a conflict between rapid closing and maintaining target visibility. We present interception-oriented spherical-bearing nonlinear model predictive control (ISB-NMPC), which couples spherical-bearing prediction with nonlinear quadrotor dynamics to jointly optimize target-directed closing motion and visibility. An attitude-compensated extended Kalman filter on S^2 estimates target bearing motion, compensates for perception delay, and predicts target bearings to guide scale-adaptive detection. Across 30 paired simulation trials, ISB-NMPC achieves an interception success rate of 86.7%, the highest among the evaluated controllers, with a mean per-trial target-visible time of 99.11%. Outdoor flights demonstrate acquisition of a 30 cm target at approximately 150 m, with interceptor speed reaching 17 m/s in the long-range flight and approximately 14 m/s while pursuing a quadrotor-towed maneuvering target. The software and hardware are open source at https://github.com/HOLYNOTBAD/ISB-NMPC and https://github.com/HOLYNOTBAD/holydrone, respectively.

0.32

Effector-Centric NMPC of Tiltable-Multirotors for Offset-Free Omnidirectional Aerial Manipulation

cs.RO ·2026-08-18 ·Jinjie Li, Yicheng Chen, Johannes Kübel, Haokun Liu, Junichiro Sugihara +1 more
top venue similarity 0.56
Abstract · 22 pages, 26 figures. Accepted to IEEE Transactions on Robotics (T-RO). This arXiv version includes a two-page appendix with additional impl…

Aerial manipulation extends robotic operations to previously inaccessible aerial environments. Unlike arm-equipped aerial systems, tiltable-multirotors can directly generate six-degree-of-freedom wrenches through their flight bases, enabling both efficient movement and omnidirectional operation by tilting the thrust direction. This work presents a design analysis and a wrench-based control framework for tiltable-multirotors in aerial manipulation. We show that a four-rotor tiltable configuration provides a balance between interference-free propeller sizing and hovering efficiency across different attitudes, and its null-space redundancy is crucial for traversing singular configurations under physical constraints. We further show that an upward end-effector placement yields a favorable trade-off between geometric clearance and available wrench. To address disturbances, we propose a dual strategy consisting of a modified integral term for model error and an acceleration-based estimator for external wrenches. Building on these insights, we develop an effector-centric nonlinear model predictive control (NMPC) framework that integrates design choices, singularity handling, and disturbance compensation into a unified formulation. The proposed framework runs fully onboard at 100 Hz on a custom-built tiltable-quadrotor. Real-world experiments, including a 90-deg step cartwheel rotation, whiteboard pushing, and continuous 360-deg valve turning, demonstrate the feasibility of wrench-based omnidirectional manipulation with singularity traversal on a one-DoF-per-arm tiltable-quadrotor.

0.50

Equivalent-Agent Guidance for Cooperative UAV Payload Transportation

eess.SY ·2026-09-16 ·Saurabh Kumar, Shashi Ranjan Kumar, Abhinav Sinha
similarity 0.56
Abstract

This paper develops a guidance framework for cooperative transportation of a rigid payload by two uncrewed aerial vehicles (UAVs) to stationary and maneuvering landing platforms. A virtual equivalent-agent representation is first introduced to describe the translational motion of the rigidly coupled UAV-payload system, allowing the transportation problem to be formulated in terms of relative range and line-of-sight dynamics with respect to the landing platform. A geometric analysis establishes the terminal feasibility conditions for payload delivery. In particular, an arbitrary prescribed approach angle can be achieved for a stationary platform, whereas successful delivery to a maneuvering platform with zero relative velocity requires terminal velocity and heading angle synchronization and consequently a zero landing angle. Leveraging this framework, a robust fixed-time sliding mode guidance strategy is developed to regulate both relative range and line-of-sight dynamics. A separate link-orientation controller and control allocation scheme is presented to map virtual equivalent agent commands to the individual UAV's control inputs. The proposed strategy guarantees convergence to the desired landing configuration within a uniformly bounded time, independent of initial engagement geometries, while explicitly accommodating uncertainties arising from target maneuvers. Numerical simulations demonstrate accurate delivery under different terminal approach angles and platform maneuvers, while processor-in-the-loop implementation on a Raspberry Pi demonstrates that the guidance algorithm satisfies the real-time computational requirements. Nonetheless, a comparative analysis shows that the proposed framework achieves better tracking accuracy and faster sliding surface convergence while requiring significantly less control energy from each UAV.

0.22

Towards safe and optimal flight: Viability Kernel MPC for Fully Actuated Multirotor

cs.RO eess.SY ·2026-08-26 ·Massimiliano Bertoni, Alberto Piccina, Gianni Lunardi, Elias Fontanari, Andrea Del Prete +2 more
similarity 0.56
Abstract

Industrial aerial robotics demands safety guarantees for navigation in unstructured environments while optimizing performance and computational efficiency. This paper presents a method for generating safe pose trajectories for fully actuated multirotors within a Model Predictive Control (MPC) framework, leveraging both viability theory and data-driven methods. Obstacle avoidance is enforced through dynamically computed axis-aligned bounding boxes, providing formal safety guarantees without exhaustive offline reachability analysis. Numerical simulations on a fully actuated tilted hexarotor validate the approach, demonstrating successful navigation in cluttered environments with real-time computational performance.

0.08

Prediction-Informed Landing Window Planning for UAV Landing on USV in High Sea States

cs.RO cs.LG ·2026-10-09 ·Kaizhen Li, Xi Zhou, Dan Zhang, Xiaowei Li
similarity 0.55
Abstract

Autonomous landing of unmanned aerial vehicle (UAV) on unmanned surface vehicle (USV) is difficult in high sea states. Existing hierarchical landing methods often infer future USV motion only implicitly from short observation histories, which limits their ability to adapt to severe and rapidly changing sea conditions. This paper presents a prediction-informed hierarchical control framework. A pretrained model is developed to explicitly predict the USV attitude during high-level landing decisions. The prediction helps identify suitable landing windows and choose the right touchdown time, while a conventional low-level flight controller maintains UAV stability and tracks motion commands. To evaluate the framework under realistic disturbances, a real-sim validation setup is constructed in which USV-motion data collected in real sea conditions are transferred to a MuJoCo USV. The experiments demonstrate the feasibility of using explicit attitude prediction to improve landing-window selection and support timing-aware UAV landing planning in rapidly varying marine environments.

0.17

Nonlinear Model Predictive Control via Sequential Convex Programming for Drone-to-Drone Docking

cs.RO ·2026-08-11 ·Neeraj Balachandar, Shriram Hari, Vishnu R. Unni
published similarity 0.55
Abstract · Accepted at IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM) 2026

Autonomous mid-air docking of multi-rotor vehicles under disturbance-driven target motion poses a constrained non-linear trajectory optimization challenge. This work formulates the docking task as a finite-horizon optimal control problem based on a reduced-order nonlinear model augmented with disturbance states. The resulting problem is solved using sequential convex programming within a receding-horizon framework to generate dynamically feasible docking trajectories. State estimation with noisy measurements is incorporated to enable robust relative motion prediction, while trajectory execution is validated in a high-fidelity rigid-body MuJoCo simulation environment. The proposed framework is evaluated for stationary and constant-velocity target motions, demonstrating reliable convergence to the docking interface while satisfying geometric capture constraints. Quantitatively, the method maintains negligible docking-cone violations and terminal state errors within prescribed tolerances, and achieves consistent, safe docking performance for cone half-angles as low as 10 degrees. Robust operation is observed for wind disturbance levels up to a standard deviation of 0.5, while preserving bounded approach velocities and stable control effort. These results demonstrate the effectiveness of the SCP-based trajectory optimization framework for disturbance-robust aerial docking under estimation uncertainty.

0.22