CS Paper Radar

Parameter Sensitivity Analysis for Aerial LiDAR-Inertial Odometries in low-altitude flights

Robert Milijas, Jose Ramiro Martinez-de Dios, Stjepan Bogdan

cs.RO ·submitted 2026-09-11 13:31 UTC · v1

Abstract

LiDAR-based SLAM (Simultaneous Localization and Mapping) and LIO (LiDAR-inertial odometry) algorithms are often used for precise navigation of unmanned aerial vehicles, especially during interactions with the aerial robot's environment. However, the performance of these algorithms is greatly dependent on the scenario, LiDAR, and robot motion characteristics, often requiring an intensive tuning process to achieve the desired performance. To aid these tuning efforts, this paper analyzes the influence on performance of the parameters of an EKF-based LIO algorithm (FAST-LIO2) and the LIO module of a graph-based SLAM algorithm (Cartographer) on aerial LiDAR SLAM datasets recorded using different LiDARs in low-to-moderate-altitude flights in diverse environments. The analysis is conducted on the absolute trajectory error (ATE) resulting from processing the datasets with the LIO algorithms configured with each combination of parameters obtained in an exhaustive grid search. The relationship between individual parameters and the ATE results is assessed using Pearson's correlation, while the influence of each parameter is assessed using random forest permutation importance analyses with random forest models trained to predict the resulting ATE values based on the choice of parameters. The performed analysis obtains for Cartographer and FAST-LIO2: i) the identification of parameters with stronger influence in performance, ii) a simplified tuning procedure, and iii) tuning recommendations. Using the proposed tuning recommendations, both algorithms obtain on the analyzed datasets ATE values within 5 cm to the optimal performance found in the grid search procedure in 94% of the analyzed cases.

Comment
19 pages, 5 figures, 14 tables

Closest papers

Nearest neighbours by meaning across the whole index.

NM-LIO: Multiple LiDAR-Inertial Odometry Addressing LiDAR Measurement Noise Discrepancy

cs.RO ·2026-10-03 ·Gunhee Shin, Seungjae Lee, Minho Oh, Dongkyu Lee, Jaeyoung Lee +2 more
published similarity 0.66
Abstract · 10 pages, 3 figures, 1 table. Published in the International Conference on Robot Intelligence Technology and Applications (RiTA 2024)

Multiple LiDAR-inertial odometry methods have been widely applied in robotic applications owing to their enhanced accuracy and reliability. However, adopting multiple LiDAR systems can be challenging due to the discrepancies in measurement noise across different LiDARs. Existing methods have typically overlooked the noise discrepancies, which can significantly affect accuracy. In this paper, we propose Noise-aware Multiple LiDAR-Inertial Odometry (NM-LIO) that addresses the noise discrepancies. We integrate a noise model to quantify the measurement noise of each LiDAR. Additionally, we estimate the uncertainty of the residuals based on the measurement noise, allowing the measurement model to capture the noise discrepancies. Our proposed method is evaluated on a public multiple LiDAR dataset and compared with state-of-the-art methods. The experimental results demonstrate that the proposed method can accurately estimate the odometry in various environments by accounting for the noise discrepancies.

0.27

Real-Time Ground Normal Vector Estimation for Spherical Mobile 3D Mapping using LiDAR-Inertial Odometry

cs.RO ·2026-10-20 ·Tim Schubert, Fabian Arzberger, Andreas Nüchter
top venue similarity 0.65
Abstract · Proceedings of the International Symposium on Artificial Intelligence, Robotics and Automation in Space (i-SAIRAS 26)

Accurate ground plane normal estimation is essential for odometry in spherical mobile mapping systems (SMMS), which face challenges from rapid rotations and limited ground coverage. We propose two RANSAC-based approaches: single-scan estimation with normal vector scoring and multi-step validation, and LiDAR-inertial odometry (LIO)-based estimation using a global 3D map. Evaluated across diverse real-world datasets against terrestrial laser scanner ground truth, results show that LIO-based estimation significantly outperforms single-scan methods in accuracy and robustness. Integrating ground normal estimates into the motion model improves pose estimation, supporting autonomous navigation in challenging and hazardous environments.

0.25

SE(3)-LIVOM: Adaptive Multi-LiDAR-Inertial-Visual Odometry and Mapping

cs.RO ·2026-11-17 ·Gunhee Shin, Seungjae Lee, Daebeom Kim, Seoyeon Jang, Hyun Myung
publishedcode/datahot direction similarity 0.62
Abstract · 3 pages, 2 figures, 2 tables. Overall winner of the COMFORT Challenge, IROS 2026 Workshop on Data in Field Robotics. Code: https://github.co…

This paper presents SE(3)-LIVOM, the overall winner of the COMFORT Challenge at IROS 2026. The challenge asks for the trajectory of a legged robot in the GrandTour dataset, whose scenes include collapsed buildings, construction sites and snowfields. SE(3)-LIVOM runs in real time on two LiDARs, one camera and an IMU. Its frontend extends SE(3)-LIO to multiple LiDARs and a camera. Adaptive downsampling keeps the time per scan near 35 ms within and across scenes. An online backend corrects drift with a plane bundle adjustment over submaps and an incremental pose graph. With a single configuration for all scenes, the system reaches an average ATE of 1.40 cm on the six test scenes. The code is available at https://github.com/url-kaist/se3-livom-comfort.

0.69

Pelorus: Resource-Aware Lidar-Inertial Odometry

cs.RO ·2026-11-17 ·Charlotte Sieh, Mario Porrmann
code/data similarity 0.61
Abstract

Lidar-inertial odometry (LIO) has an efficiency problem. High-resolution lidars produce millions of points per second that must be processed online on the resource-constrained hardware of robots, cars, or drones, yet most LIO methods neither bound their memory nor report their compute footprint. We introduce Pelorus, a resource-aware LIO with a fixed-capacity multiresolution map of voxelized normal distributions and an iterated equivariant state estimator. A relevance-based eviction keeps the map memory bounded, and a maturity-weighted map update suppresses inconsistent observations. The pipeline runs in parallel on CPUs and GPUs. On five sequences from three public datasets, Pelorus achieves the lowest relative pose error in seven of ten metrics with a small, bounded memory footprint and, with GPU offloading, the lowest CPU load of all compared methods. On an NVIDIA Jetson Orin NX, it processes a 128-beam lidar at 10 Hz. Pelorus is open source with CUDA, Vulkan, and Metal backends.

0.22

Does Online Gravity Estimation Matter? Revisiting a Silent Design Split in LiDAR-Inertial Odometry

cs.RO ·2026-09-12 ·Jie Xu, Ziyi Jin, Kangjin Yu, Can Jiang, Hongjun Huang +3 more
code/data similarity 0.61
Abstract · 8 pages, 5 figures. Code, evidence, and video: https://github.com/jiejie567/rethink-lio-gravity

LiDAR-inertial odometry (LIO) systems differ in whether they continue estimating gravity after initialization. We compare four gravity-bias state configurations in each of FAST-LIO2 and LIO-SAM, then separately test a gravity-direction factor. Across 12 dataset sequences evaluated with FAST-LIO2, fixing gravity under continuous LiDAR correction produces mean paired changes in vertical and 3D position errors with 90% confidence intervals within $\pm 2\%$. Tests on 4 sequences with LIO-SAM likewise show no consistent benefit from online gravity. Multi-second LiDAR outages, unlike reduced range or field of view, reveal trajectory-dependent costs of fixing gravity. A history-matched 23D-to-21D switch places the repeatable 3D error increase after LiDAR updates resume. Under 5-s outages, a direction factor from the same IMU used for preintegration improves accuracy on Hall05 but worsens both errors with online gravity on TUHH. Dynamic-start tests also show fixed-bias failures at particular starting phases. We recommend keeping gravity and accelerometer bias online for robustness; use a direction factor only after verifying vertical and 3D accuracy gains under the intended operating conditions.

0.47

LIN-SLAM: Lightweight LiDAR--Inertial Neural SLAM for Real-Time Onboard Navigation

cs.RO ·2026-10-15 ·Shiqi Che, Yijie Liu, Shuo Wang, Wenxin Liu
similarity 0.61
Abstract · 8 pages, 4 figures, submitted to Robotics and Automation Letters (RA-L)

Geometric light detection and ranging (LiDAR)--inertial simultaneous localization and mapping (SLAM) provides efficient state estimation but lacks the continuous map representation and global refinement capabilities of neural implicit SLAM, while neural implicit methods remain computationally expensive. We propose Lightweight LiDAR--Inertial Neural SLAM (LIN-SLAM), a hybrid method that couples high-rate geometric LiDAR--inertial estimation with neural implicit tracking, continual mapping, and global refinement for accurate real-time onboard SLAM. Experiments on twelve representative sequences from three datasets spanning 32-, 64-, and 128-channel LiDAR configurations show that LIN-SLAM achieves the lowest overall mean absolute trajectory error (ATE) among the evaluated state-of-the-art geometric and neural implicit methods, while substantially reducing runtime compared with existing neural implicit SLAM methods. On a Unitree Go2 equipped with an NVIDIA Jetson Orin NX and a 16-channel LiDAR, LIN-SLAM sustains real-time localization and neural mapping over a 1.47-km indoor trajectory through challenging repetitive corridor environments, with an endpoint closure error of only 0.141~m. To the best of our knowledge, LIN-SLAM is the first LiDAR--inertial SLAM system with a neural implicit backend to achieve real-time online operation on a mobile robotic platform while maintaining state-of-the-art localization accuracy. The code will be released upon acceptance.

0.17

FREE-LIVO: Physically Decoupled Yet Tightly Coupled LiDAR-Inertial-Visual Odometry

cs.RO cs.CV ·2026-11-05 ·Reon Tabata, Kenji Koide, Shuji Oishi, Taku Okawara, Mizuho Aoki +3 more
similarity 0.60
Abstract

LiDAR-Inertial-Visual Odometry (LIVO) integrates complementary LiDAR, camera, and IMU measurements to achieve robust state estimation. However, most existing methods assume a fixed relative pose and accurate time synchronization between sensors. Toward modular and heterogeneous robotic systems, this paper presents FREE-LIVO, a tightly coupled odometry method that requires neither a rigid LiDAR-camera rig nor LiDAR-camera time synchronization. The proposed method uses a pretrained image feature matcher to establish correspondences between a camera image and a dense LiDAR intensity image generated from a single LiDAR scan using a generative model. From the resulting 3D point-to-pixel correspondences, we construct reprojection factors that directly constrain LiDAR and camera poses at different acquisition times. These factors are jointly optimized in a single factor graph together with constraints from point cloud registration, visual feature tracking, and the IMU measurements associated with each sensor. On six sequences from the public M3DGR dataset, FREE-LIVO achieves an average absolute trajectory error (ATE) RMSE of 0.45 m without provided LiDAR-camera extrinsic parameters and exhibits minimal accuracy degradation under time synchronization errors of up to 0.5 s. Furthermore, experiments with the LiDAR and camera mounted on separate robots demonstrate that the method can jointly estimate the trajectories of independently moving sensors.

0.22

GR-LIO: A Local Ground-Aware LiDAR-Inertial Odometry System Using Body-to-Ground Height

cs.RO ·2026-10-04 ·Zhixin Zhang, Yang Song, Liang Zhao, Nathan Shankar, Barry Lennox +1 more
benchmark similarity 0.60
Abstract · 15 pages Journal

LiDAR-inertial odometry (LIO) is widely used for state estimation in ground-based autonomous mobile robots. However, the geometric constraints provided by the local ground surface remain largely underexploited in existing LIO systems. This paper proposes a filter-based local ground-aware LIO framework that explicitly incorporates local ground plane geometry into the state estimation process to improve both localization accuracy and computational efficiency. Specifically, a local ground plane is parameterized by the robot orientation and the body-to-ground (B-G) height and continuously propagated within the state estimation process. Based on the proposed B-G geometry model, a propagated local ground plane enables efficient and reliable ground segmentation. The segmented ground points are then incorporated into the filter update through point-to-plane geometric constraints, improving both state estimation accuracy and efficiency. Furthermore, a planar motion update is introduced to exploit the propagated local ground plane as an additional geometric constraint, effectively suppressing vertical drift and improving estimation robustness. To address the initially unknown B-G height, an efficient initialization strategy is developed, followed by an online calibration procedure for continuous refinement. The proposed system is evaluated on several public benchmark datasets and self-collected real-world datasets covering diverse operating scenarios. Experimental results demonstrate that the proposed method consistently outperforms representative LIO methods in terms of both localization accuracy and computational efficiency.

0.17