CS Paper Radar

Volumetric Harmonic Field Navigation for Quadrotors

Shuxiu Jia, Amartya Mukherjee, Yating Yuan

cs.RO math.APmath.OC ·submitted 2026-09-14 14:53 UTC · v2

Abstract

Quadrotor navigation in cluttered 3-D environments requires global guidance while local motion remains subject to collision and motion limits. Harmonic potentials provide dense guidance from a global boundary value problem, but coupling a volumetric harmonic field to constrained physical quadrotor motion remains an open experimental problem. We couple a precomputed volumetric harmonic field with a constrained predictive planner that queries the field at predicted positions instead of extracting a global reference path. In Structured 3-D tests, harmonic guidance yields larger minimum clearance and lower RMS jerk than matched Dijkstra guidance, at the cost of longer paths; the same pattern remains when both methods use the same passage. Long maze tests span routes far beyond one prediction horizon, and Crazyflie trials validate physical execution. To the best of our knowledge, this is the first physical quadrotor demonstration of volumetric harmonic field navigation. The results show that globally constructed harmonic guidance can directly support local constrained motion generation on a physical quadrotor.

Closest papers

Nearest neighbours by meaning across the whole index.

Local Path Planning and Obstacle Avoidance for an Omnicopter Platform

cs.RO ·2026-09-03 ·Mikolaj Helinski, Spilios Theodoulis, Mahmoud Hamandi, Abdullah Mohamed Ali, Anthony Tzes +1 more
published similarity 0.66
Abstract · 8 pages, accepted paper at ICUAS 2026

Autonomous unmanned aerial vehicles (UAVs) increasingly operate in cluttered environments where global planners such as RRT* are not directly deployable at control rates. This paper presents a real-time local planning and obstacle avoidance module for an omnidirectional multirotor (omnicopter) by extending the Dynamic Window Approach to six degrees of freedom (6D-DWA). Our method achieves real-time feasibility through (i) local-map voxelisation, (ii) a compact sphere-based approximation of the vehicle geometry, and (iii) adaptive velocity sampling in the 6D search space. To improve reactivity to unknown obstacles, we introduce a context-aware "Agile Mode" that adjusts scoring weights online to trade-off between goal progress, clearance, and heading/facing constraints during evasive manoeuvres. We evaluate our approach in simulation across computational stress tests, dense-waypoint path tracking, and static/unknown obstacle scenarios. Our planner runs consistently within a 0.2s control loop, tracks waypoint-dense global paths with < 0.1m average cross-track error and 13deg average heading error, and avoids collisions in static environments. For unknown obstacle avoidance, Agile Mode achieves 79.3% success for an off-centre obstacle and 41.4% for a centred obstacle, highlighting both the effectiveness of adaptive weighting and remaining limitations in highly constrained geometries.

0.26

NMPP: Nonlinear Model Predictive Planning for Agile UAV Flight in Cluttered Environments

cs.RO ·2026-10-06 ·Ondřej Procházka, Juraj Pauko, Robert Pěnička, Martin Saska
similarity 0.66
Abstract

Flying a quadrotor through a cluttered environment requires not only planning a collision-free reference trajectory based on perceived obstacles, but the reference also needs to be dynamically feasible and within the actuation limits of the vehicle, so that the controller can track it precisely. Existing methods either optimize a smooth polynomial inside a convex corridor, which limits agility, or treat obstacles as soft costs traded against tracking performance. We propose a Nonlinear Model Predictive Planning (NMPP) that imposes perceived obstacles as hard geometric constraints and hands a full-state reference to an obstacle-blind SE(3) controller. Our planner achieves a 58-67 % lower position RMSE than a linear Model Predictive Control trajectory planner and a 41-70 % lower RMSE than a polynomial trajectory planner. It also completes all forest flights with up to 9.5 m/s speed without collisions, and achieves 86 % flight success rate under a more aggressive speed profile where a state-of-the-art planner has only 26 % success rate. The real-world deployment showed reliable execution flying up to 5.5 m/s in an unknown cluttered environment.

0.19

Global Path Planner with Multi-Model Switching

cs.RO cs.SEeess.SY ·2026-09-11 ·Pietro Gori, Francesco Iotti, Eduard Zelenay, Rastislav Marko, Michele Pierallini +3 more
hot direction similarity 0.65
Abstract

This work enhances global path planning via a pure-pursuit controller with multi-model kinematic switching that sustains plan fidelity across diverse terrains. The system includes a traversability graph for terrain analysis, a Heading-Aware A* algorithm for generating feasible paths, and a multi-model Pure Pursuit controller for dynamic tracking. A core innovation is adaptive kinematic modeling, enabling real-time switching between kinematic models based on terrain features and robot states. This adaptability optimizes path efficiency and energy use in challenging scenarios. We validate the approach in simulation on different platforms, namely the Artaban quadruped and the X3 quadrotor drone, showcasing improved performance, robustness, and adaptability over standard baselines.

0.26

Some Modifications to Our End-to-End UAV Planner

cs.RO ·2026-08-16 ·Junjie Lu, Bailing Tian
similarity 0.63
Abstract

The one-stage planner YOPO maps a single depth image and the robot state directly to a set of candidate trajectories, trained by backpropagating through differentiable trajectory costs. This yields dense, geometrically informative supervision, but inherits the pathologies of soft-constrained optimization: the safety cost competes with the smoothness and goal-reaching terms, is non-convex across homotopy classes, and the single-piece polynomial is limited in expressiveness. In this report, we summarize several effective modifications. We adopt a two-piece MINCO parameterization, trading time for smoothness without altering the trajectory's spatial profile. We further lift YOPO's multi-modal prediction to span distinct homotopy classes, treating each motion primitive as a homotopy anchor that confines the trajectory to a feasible basin - without explicit safe-flight-corridor construction or front-end search. For dynamic feasibility, we impose barrier penalties on velocity and acceleration together with a curvature-dependent speed limit whose gradient acts only on the velocity, producing an adaptive-speed behavior that decelerates in cluttered regions or sharp turns. We replace score regression with a ranking loss, preventing small score errors from reordering the candidate set. These yield richer trajectory representations, safer obstacle avoidance, and more direct flight paths.

0.04

DR-IPC: Disturbance-Resilient Integrated Planning and Control for LiDAR-Based Quadrotor Navigation

cs.RO eess.SY ·2026-10-02 ·Peng Liu, Jingyan Wang, Qipeng Ye, Wen Li, Jinya Su +3 more
similarity 0.63
Abstract · 11 pages, 16 figures, 7 tables

LiDAR-based quadrotor navigation in cluttered environments remains challenging under external disturbances, particularly when obstacle-aware motion generation and disturbance-rejection control are handled in separate layers. This article presents disturbance-resilient integrated planning and control (DR-IPC), which combines lightweight path guidance with nonlinear model predictive control (NMPC) to directly generate angular velocity and thrust. An interconnected extended Kalman filter and nonlinear disturbance observer jointly provide filtered state estimates and reconstructed disturbances for NMPC prediction. The resulting formulation unifies nonlinear quadrotor dynamics, actuator constraints, local motion generation, and penalised safe-flight-corridor residuals without requiring a separate trajectory-optimization stage. Gazebo and MARSIM simulations, together with indoor and outdoor experiments, validate DR-IPC under wind, suspended payloads, narrow passages, ball impacts and reactive avoidance of a dynamic obstacle. In multi-goal navigation with disturbances, DR-IPC increases the number of completed missions from 1/10 to 9/10 in Gazebo and reduces the altitude RMSE from 0.34 to 0.01 m in experiments. The complete system operates onboard at 100 Hz. Supplementary videos are available on the project page https://drpp316.github.io/DR-IPC-Page/, and the source code will be released.

0.25

CMP-IRRT*: A Perception-Assisted Height-Adaptive Planner for Quadruped Robots

cs.RO ·2026-10-07 ·Mingfan Zhao, Wendong Mao, Zhongfeng Wang
publishedcode/data similarity 0.62
Abstract · Accepted at the 18th Asian Conference on Machine Learning (ACML 2026)

Quadruped robots can traverse low obstacles, but many 2D planning pipelines still model obstacles as binary occupied regions and rely on sampling-based search that can be inefficient under a limited budget. We propose a perception-assisted height-adaptive planning framework based on CMP-IRRT*, a Channel Mamba PointNet-guided Informed RRT* planner. Given a calibrated top-view RGB observation, the perception module estimates obstacle regions and converts depth predictions into a ground-relative height map. The planner then performs height-conditioned collision checking, treating high obstacles as blocked while allowing low obstacles to be traversed, and uses the CMP guide to bias sampling toward promising regions while retaining standard free-space and informed sampling fallbacks. Experiments on 2D planning benchmarks show that CMP-IRRT* reduces explored nodes and iterations compared with classical and neural-guided baselines, and a controlled ablation supports the contribution of the Mamba-based guide. In constructed traversability-aware scenarios, the proposed planner reduces path length by up to 16.3% when low obstacles are traversable, and a Unitree Go2 demonstration further shows executable bypassing and traversal behaviors. Our code is publicly available at https://github.com/MingfanZhao/height-adaptive-planner.

0.40

Towards safe and optimal flight: Viability Kernel MPC for Fully Actuated Multirotor

cs.RO eess.SY ·2026-08-26 ·Massimiliano Bertoni, Alberto Piccina, Gianni Lunardi, Elias Fontanari, Andrea Del Prete +2 more
similarity 0.62
Abstract

Industrial aerial robotics demands safety guarantees for navigation in unstructured environments while optimizing performance and computational efficiency. This paper presents a method for generating safe pose trajectories for fully actuated multirotors within a Model Predictive Control (MPC) framework, leveraging both viability theory and data-driven methods. Obstacle avoidance is enforced through dynamically computed axis-aligned bounding boxes, providing formal safety guarantees without exhaustive offline reachability analysis. Numerical simulations on a fully actuated tilted hexarotor validate the approach, demonstrating successful navigation in cluttered environments with real-time computational performance.

0.08

Terrain-Aware Autonomous Planetary Exploration for Exteroceptive-Proprioceptive Mapping with Quadruped Scouts

cs.RO ·2026-09-28 ·Alberto Sanchez-Delgado, João Carlos Virgolino Soares, Victor Barasuol, Claudio Semini
published similarity 0.61
Abstract · Accepted to the International Conference on Space Robotics (iSpaRo 2026)

Autonomous planetary exploration requires robots to navigate unknown, uneven terrain while assessing risk, traversability, and energetic cost. Quadruped scouts are well suited for this task because they can traverse irregular surfaces and gather mobility-relevant information during locomotion. This paper presents a terrain-aware exploration framework that combines exteroceptive and proprioceptive mapping for a quadruped robot in lunar-like environments. An onboard RGB-D camera builds robot-centered elevation maps, estimates geometric traversability, and derives navigation costs for autonomous planning. In parallel, proprioceptive measurements provide interaction-aware terrain cues that complement geometry-based assessment. Local maps are incrementally registered into a global multi-layer representation, which is used by an exploration module to select targets in unexplored regions of interest. The targets are reached by an autonomous navigation system that guides collision-aware motion using the available map and cost layers. Simulation results on NVIDIA Isaac Sim show autonomous exploration, map expansion, and spatial association between terrain geometry and robot-terrain interaction. Subsequent navigation using this information exhibits lower average Cost of Transport (CoT) than initial exploration.

0.22