CS Paper Radar

Distributed Edge-to-Cloud Architecture for Continual Harmonic Load Modeling

Bhaskar Mitra, Soumya Kundu

eess.SP ·submitted 2026-09-14 18:19 UTC · v2

Abstract

Rapid proliferation of power electronic loads at the distribution grid edge has made accurate harmonic load modeling critical for power quality assessment, transformer derating, and grid planning. Existing Frequency Coupling Matrix (FCM) identification methods produce static, one-time models that rapidly lose fidelity as load composition evolves. This paper proposes a distributed edge-to-cloud architecture for autonomous, continual FCM re-identification under real field conditions, with two contributions: (i) a state-machine-driven pipeline that monitors point-on-wave (PoW) measurements and triggers FCM re-identification only when model accuracy falls below a set threshold; and (ii) an edge-to-server architecture confining waveform processing to a low-cost Raspberry Pi node, transmitting only compact JSON model updates upon confirmed change rather than streaming raw PoW data. Validated through a residential field deployment, the framework triggered retraining in 3 of 33 monitoring cycles and restored system modeling accuracy above the 80\% threshold after each event, reducing upstream data transmission by 99.7% relative to continuous streaming.

Comment
5 pages

Closest papers

Nearest neighbours by meaning across the whole index.

Collecting Infrastructure-Level Measures for Energy Analysis in Modern Computing Infrastructures

cs.DC ·2026-11-17 ·Isac Pasianotto, Stefano Cozzini, Niccolo Tosato
top venuedataset similarity 0.61
Abstract · Accepted version. Published in SC Workshops '26 (Chicago, IL, USA, 2026). Version of Record: https://doi.ieeecomputersociety.org/10.1109/SCW…

Modern HPC facilities are complex environments in which all components are tightly coupled; consequently, precisely modeling and accounting for energy consumption requires approaches that go beyond instrumenting individual compute nodes. Aiming for a cluster-wide vision, we designed a scalable data collection pipeline that aggregates fine-grained measurements from multiple subsystems-spanning component loads, software and hardware counters, sensors and energy-ensuring consistent sampling frequencies and synchronized data acquisition across the infrastructure. We present a dataset of comprehensive metrics collected at 1 Hz over one month from a production research data center supporting heterogeneous workloads, including HPC, Kubernetes services, and distributed storage. To illustrate what this approach makes possible in practice, we analyze two case studies-distributed I/O and large-language-model inference-showing how cluster-wide measurement reveals system-level dynamics missed by localized instrumentation. The proposed dataset and collection methodology provide a foundation for future work on predictive modeling, energy-aware resource management, and more efficient computing infrastructures.

0.44

Online Continual Learning in Edge-Cloud Applications

cs.LG cs.CV ·2026-10-23 ·Charalampos Davalas, Dimitrios Michail, Christos Diou, Iraklis Varlamis, Konstantinos Tserpes
similarity 0.59
Abstract

Deployed machine learning models in real-world IoT and edge/cloud systems face a critical reliability bottleneck: the requirement for online adaptation to non-stationary data streams while operating without access to the full original training dataset. Performance is severely degraded when models encounter Out-of-Distribution (OOD) inputs or suffer from catastrophic forgetting. Addressing these challenges requires adaptation mechanisms capable of learning from evolving data streams while preserving previously acquired knowledge. This paper proposes an edge-cloud methodology for integrating Continual Learning (CL) with Out-of-Distribution (OOD) Detection and Concept Drift Detection in IoT applications. The methodology incorporates ODIN and ECDD as alternative mechanisms for identifying informative samples for annotation and triggering rehearsal-based model updates. Experimental results across automotive, healthcare, and agricultural datasets demonstrate the applicability of the proposed methodology and its potential to support model adaptation while mitigating catastrophic forgetting.

0.24

Slasher: Power Flexibility for Cloud Datacenters

cs.DC cs.OSeess.SY ·2026-08-26 ·Liuzixuan Lin, Fiodar Kazhamiaka, Alok Gautam Kumbhare, Chaojie Zhang, Jaylen Wang +8 more
similarity 0.57
Abstract · 18 pages, 15 figures

Datacenters consume many megawatts of power, and regularly encounter scenarios that require modulating their power draw. These scenarios include datacenter infrastructure failures, power grid failures, grid services, and more, spanning a diverse range of requirements in terms of the power magnitude, the scope of the reduction, the notice time, and other dimensions. To address these scenarios, we have built Slasher, a general system for modulating the power of \azure datacenters to handle scenarios ranging from individual racks to regional multi-datacenter grid events. Slasher coordinates datacenter resources with the goal of meeting power targets while minimizing negative impact on hosted workloads. In this paper, we review the main power modulation scenarios, characterize the power reduction levers using data from production cloud datacenters, describe Slasher's system architecture, and formulate the cloud datacenter power modulation control problem. We also develop a high-fidelity datacenter simulator and propose a workload impact model, using them to design and evaluate power control algorithms.

0.31

Physics-Aware Distillation of a Grid Foundation Model for Real-Time Edge Inference

cs.LG ·2026-10-15 ·Vlad Alexandru Sănduleac, Shahariya Rasheed Rayamarakkarveettil Puthanpurayil, Noman Khan, Remus Teodorescu
benchmark similarity 0.56
Abstract

Grid foundation models (GridFMs) are graph transformers pretrained on a masked power-flow objective, and evaluate power flow orders of magnitude faster than an iterative solver. Their size, however, targets data-centre inference, whereas low-inertia operation increasingly asks for inference at the edge, next to the measurement, at batch size one and within a single synchrophasor (PMU) reporting frame. We distil a 20.1M-parameter, 12-layer GridFM teacher into a 0.62M-parameter, 6-layer student, a $32.5\times$ parameter reduction at half the message-passing depth, using an objective that combines the masked power-flow loss with output, physics-residual, latent-state and attention transfer. The physics-residual term, which matches the teacher's power-residual profile, has not previously been applied to typed power-grid graphs. We evaluate on a renewable variant of the IEEE 118-bus benchmark grid in which 26 of the conventional (synchronous) generators are replaced by inverter-based renewables with battery flexibility and standardised reactive-power limits (IEEE 1547), giving $97\,529$ physically valid (AC-OPF-feasible) operating scenarios, and we ablate all eight combinations of the transfer terms, reporting accuracy against ground truth and fidelity to the teacher separately. Distillation lowers student error on all four predicted quantities, by up to $48\%$ on active-power dispatch, and every distilled student is more accurate than its teacher on reactive-power dispatch. The gain is largely carried by the output matching term. The physics-residual term, in the layer-aggregated form used here, is consistently harmful, which we attribute to the spatial averaging it applies to a bus-level residual field. The resulting student is $32.5\times$ smaller in parameter count and has half the message-passing depth, making it a candidate for subsequent edge-device benchmarking.

0.40

Grid-Aware Assessment of Forced Oscillations from Spatially Distributed Large Loads

eess.SY ·2026-11-17 ·Min-Seung Ko, Hao Zhu
similarity 0.55
Abstract

This paper develops a unified analytical framework for assessing forced oscillations induced by spatially distributed large-load fluctuations to determine their grid-aware fluctuation magnitudes. Emerging computational loads, such as hyperscale datacenters, present cyclic power variations with dynamic impacts depending on the waveform characteristics, forcing frequency, and source location. Our grid-aware framework represents these fluctuations using deterministic harmonic and probabilistic spectral models, and analyzes the resulting bus-wise frequency deviations based on a generic grid frequency-response model. Deterministic, risk-aware, and band-based probabilistic severity measures are further developed to obtain admissible fluctuation limits under different assumptions on frequency and phase uncertainty. We also formulate a security-constrained (SC) optimization of locational fluctuation magnitudes among existing large loads, accounting for their aggregated frequency deviation level. Case studies on the IEEE 39-bus and 14-generator Australian systems validate the proposed severity measures and admissible limit analysis. The SC optimization results further show that distributing a given amount of aggregate fluctuation toward dynamically less sensitive locations can substantially reduce system-wide oscillation severity.

0.34

Real-Time Edge-based Detection of Correlated AI Data-Center Load Episodes

eess.SY ·2026-08-24 ·Chandan Chaudhary, Abanish Tiwari, Yansong Pei, Mohammed Ben-Idris, Joydeep Mitra
similarity 0.55
Abstract · Submitted to 2027 IEEE PES Grid Edge, to be held in 19-22 April, Salt Lake City, Utah, USA

Artificial-intelligence data centers running bulk-synchronous training can impose sub-second power swings. When several facilities synchronize their training cycles, these load variations become spatially correlated and amplify the aggregate disturbance on the grid. A grid operator without access to data-center telemetry must infer this correlation from electrical measurements alone. However, the required observation time and the feasibility of detection on substation-deployable hardware remain uncharacterized. This paper develops a correlation-based detection method to classify the multi-facility operating regime from cross-facility power measurements. Analytical derivations and experimental validation show that the resulting detection confidence increases with the observation-window length at a rate governed by the load correlation time. The method is demonstrated in a real-time hardware-in-the-loop testbed, where load setpoints generated from a validated semi-Markov data-center load model are applied to an electromagnetic-transient grid simulation on a Real-Time Digital Simulator. A compact classifier built on pairwise power correlations runs on an edge device in this loop and determines whether the data-center load variations are independent or spatially correlated. The cross-facility correlation separates the independent and correlated cases across independent realizations. The held-out detection accuracy improves with the observation window, consistent with the predicted relation. A raw-waveform network fails to generalize, supporting pairwise correlation as the discriminative signal. The detector executes in real time on commodity edge hardware. A closed-loop demonstration against the running simulator tracks a regime change within one observation window.

0.43

TrafficFab: An Autonomic Edge-Cloud Testbed Fabric forAI-Driven Traffic Management

cs.DC ·2026-09-24 ·Mayank Arya, Pranjal Naman, Priyanshu Pansari, Roopkatha Banerjee, Daksh Mehta +3 more
similarity 0.55
Abstract

Traffic management in emerging megacities requires real-time analytics over thousands of CCTV video streams under latency, bandwidth, compute and energy constraints. We present TrafficFab, an autonomic edge--cloud testbed for AI-driven traffic management, designed to validate a representative slice of a megacity deployment. TrafficFab combines RTSP stream emulation, heterogeneous edge inference using DNNs, cloud-based nowcasting and forecasting using Spatio-Temporal Graph Neural Network (ST-GNN), and continual model adaptation through foundation-model (FM)-assisted Federated Learning (FL). Its autonomic control enables fine-grained scale-out/in of edge inference through energy- and migration-aware scheduling, elastic scale-up/down of GNN forecasting on public clouds, and periodic adaptation of the DNN on edge accelerators and private cloud, without centralized video collection. We evaluate TrafficFab on a Bangalore-city inspired deployment, spanning Raspberry Pis, Jetson accelerators, GPU fogs, private cloud servers, and cloud VMs, sustaining real-time analytics for $\approx 400$ live camera streams (10% of Bangalore) and analytically characterize larger setups. The results demonstrate that TrafficFab offers a practical validation-scale platform for closed-loop traffic analytics, short-term operational decision support, and longer-horizon planning analyses in megacity scales.

0.16

Seamless Deployment of Machine Learning Inference at the Far Edge: An Empirical AWS IoT Greengrass Architecture for Industrial Predictive Maintenance

cs.DC cs.AI ·2026-10-10 ·Prince Kwabena Appiah Boadu, Jeffery Baafi Kyei, Enoch Kofi Koranteng, Griffth Selorm Klogo
top venuehot direction similarity 0.55
Abstract · Conference paper draft in IEEE format, with code appendices. Already accepted in AiBThings - IEEE 4th International Conference on Artificial…

Industrial IoT sensors produce continuous, high-volume data streams that predictive maintenance needs to analyse in real time. Cloud-centric architectures send all raw telemetry to central servers, which costs latency, bandwidth and resilience. This paper presents a hybrid cloud-edge architecture for manufacturing predictive maintenance built on AWS IoT Core and AWS IoT Greengrass v2, with local machine learning inference at the edge and selective cloud synchronization. We deploy two configurations on real AWS infrastructure and compare them: a cloud-only baseline (Configuration A) and the proposed hybrid edge architecture (Configuration B). We measure end-to-end inference latency, bandwidth consumption and inference accuracy. Configuration B cuts cloud-bound bandwidth by 86.8% (63.6 KB to 7.2 KB per 200-reading window) and decision latency by 256x (23.1 ms cloud round trip to 0.09 ms local inference). At the edge, with no cloud involvement, it keeps an anomaly-class F1 score of 0.84 and 91% recall. The evaluation also instruments system uptime and Stream Manager queuing under cloud disconnection; the quantitative disconnection experiment is left as planned work. Our review of the literature points to four gaps that this work addresses: the lack of empirically validated Greengrass v2 deployments for predictive maintenance, unquantified bandwidth savings from selective edge synchronization, unmeasured resilience under cloud disconnection, and the open MLOps feedback loop at the edge.

0.44