CS Paper Radar

EBL: Efficient Broad Learning for Distributed Adaptive Harmonic Analysis

Changhong Li, Georgios Floros, Biswajit Basu, Shreejith Shanker

cs.AR cs.LG ·submitted 2026-09-14 21:24 UTC · v1

Abstract

Renewable energy systems and electrified transport have found widespread adoption in recent years. The integration of these non-linear loads, dominated by electric vehicle (EV) charging, however, has introduced severe harmonic distortion into the power grid, impacting the efficiency and lifetime of substation equipment and switchgear in the distribution network. Rapid and high-precision harmonic analysis has hence become a prerequisite for effective harmonic control at the source of injection. This paper proposes an Efficient Broad Learning (EBL) framework for distributed adaptive harmonic estimation. As a quantised FPGA acceleration framework for BLS-style harmonic estimation, it offers high-accuracy estimation with half-cycle input, reconfigurable flexibility enabled by the FPGA implementation, and ultra-low latency, achieving 17.4 $\times$ faster predictions than the nearest reported FPGA method. For harmonic prediction across multi-scenario charging and discharging nodes, the online transfer learning based on a closed-form solution rather than backpropagation in EBL demonstrates rapid adaptability. By exploiting bespoke quantisation and sparsity, the approach consumes 5.9\% of the LUTs on the Zynq Ultrascale+ ZU7EV FPGA, using $\approx$ 82\% of the LUTs required by the state-of-the-art FPGA-accelerated estimator.

Comment
Accepeted by ICECS'26

Closest papers

Nearest neighbours by meaning across the whole index.

FedAvgIm: Federated Learning for Multi-Site Impedance Identification of Inverter-Based Resources

eess.SY ·2026-10-26 ·Quang Manh Hoang, Guilherme Vieira Hollweg, Akhtar Hussain, Wencong Su, Van-Hai Bui
top venue similarity 0.54
Abstract · Author-accepted manuscript (not the IEEE version of record)

With the increasing integration of inverter-based resources (IBRs) into power systems, assessing small-signal interaction stability has become essential. Impedance/admittance models enable frequency-domain characterization of IBR dynamics without requiring access to proprietary internal control details, but measurement-based identification is time-consuming and must be repeated across operating points. This paper proposes FedAvgIm, a privacy-aware federated-learning framework for multi-site dq-admittance identification under severe local data scarcity and raw-data-locality constraints. Each IBR site trains a local feed-forward neural network using a small set of operating-point-frequency samples, while only model parameters are shared with a cloud aggregator that performs sample-size-weighted FedAvg to update a global model and broadcast it back to all sites. To demonstrate effectiveness, EMT measurement-based admittance datasets are constructed for nine grid-following IBRs with different parameters, architectures, measurement-noise levels, and non-IID settings, where each client has only 40-390 training samples. Results show that FedAvgIm achieves performance close to centralized training and consistently outperforms local-only learning and raw-data-locality-preserving transfer-learning baselines. Additional studies show that FedAvgIm maintains stable learning behavior under measurement noise and remains beneficial under moderate non-IID conditions. The estimated dq-admittance models are further applied to generalized Nyquist stability analysis and validated against EMT time-domain simulations under multiple operating points and grid-strength conditions.

0.71

Distributed Edge-to-Cloud Architecture for Continual Harmonic Load Modeling

eess.SP ·2026-09-14 ·Bhaskar Mitra, Soumya Kundu
similarity 0.54
Abstract · 5 pages

Rapid proliferation of power electronic loads at the distribution grid edge has made accurate harmonic load modeling critical for power quality assessment, transformer derating, and grid planning. Existing Frequency Coupling Matrix (FCM) identification methods produce static, one-time models that rapidly lose fidelity as load composition evolves. This paper proposes a distributed edge-to-cloud architecture for autonomous, continual FCM re-identification under real field conditions, with two contributions: (i) a state-machine-driven pipeline that monitors point-on-wave (PoW) measurements and triggers FCM re-identification only when model accuracy falls below a set threshold; and (ii) an edge-to-server architecture confining waveform processing to a low-cost Raspberry Pi node, transmitting only compact JSON model updates upon confirmed change rather than streaming raw PoW data. Validated through a residential field deployment, the framework triggered retraining in 3 of 33 monitoring cycles and restored system modeling accuracy above the 80\% threshold after each event, reducing upstream data transmission by 99.7% relative to continuous streaming.

0.34

Transfer Learning with Conformalized Quantile Regression for Solar PV Forecasting Under Load-Shedding-Driven Data Scarcity

cs.LG ·2026-09-22 ·Rakib Abdullah, K. M. Tahlil Mahfuz Faruk
code/data similarity 0.54
Abstract · 6 pages, 4 figures, 1st International Conference on Next-Generation Electrical & Electronics, Computer Systems, and Technologies (iCONEECT 2…

Solar photovoltaic (PV) forecasting in regions affected by load shedding is challenging because reliable historical observations are scarce. This study proposes a transfer learning framework combined with Conformalized Quantile Regression (CQR) to improve PV power forecasting and provide reliable uncertainty estimates under severe data scarcity. A source-domain PV dataset from Alice Springs, Australia, is used to pretrain a temporal forecasting model, which is then adapted to simulated Bangladesh PV data representing different levels of historical availability. Experimental results show that transfer learning reduces RMSE by up to 23.7% when only one month of target-domain data is available and by 13.7% with three months of data. The proposed Transfer Learning plus CQR framework achieves 94.3% empirical coverage with three months of target data while producing prediction intervals that are 14% narrower than those obtained without transfer learning. These results demonstrate that combining transfer learning with conformal uncertainty quantification can improve both point forecasting accuracy and uncertainty reliability when target-domain PV data are severely limited.

0.40

Frequency-Calibrated Decision-Focused Learning for BESS Dispatch Under Renewable Uncertainty

eess.SY ·2026-10-30 ·Zihan Meng, Chenxi Hu, Xin Cui, Francis Yunhe Hou
hot direction similarity 0.54
Abstract

Battery energy storage system (BESS) flexibility depends on state of charge and intertemporal operating constraints. Renewable forecast errors of similar magnitudes can lead to different BESS dispatch results. An error may alter early charging or discharging decisions and reduce the flexibility available for subsequent regulation, while another may have little effect on the resulting schedule. To account for these unequal consequences, this paper proposes Frequency-Calibrated Decision-Focused Learning (FC-DFL), which trains renewable predictors using the realized operating costs of their induced BESS schedules. Gaussian smoothing and solver-based zeroth-order estimation provide training feedback without requiring differentiating through the non-differentiable mixed-integer BESS dispatch problem. The same decision feedback is further combined with prediction sensitivity to develop a decision-oriented XAI method that identifies the input features and forecast periods most consequential to BESS operation. Case studies using German wind and solar data show that FC-DFL reduces the integrated absolute frequency-deviation metric by 6.05% and decision regret by 23.92% relative to accuracy-based predict-then-optimize method. The XAI analysis further demonstrates that the identified high-impact forecast periods produce 2.84 times larger average absolute changes in realized operating cost than low-impact periods. These findings highlight the importance of incorporating downstream decision-making outcomes into renewable forecasting and demonstrate the value of FC-DFL in improving BESS regulation and providing operationally meaningful forecast explanations.

0.24

Relative Discharge Stage (RDS) Classification: A Practical Indicator of Battery Discharge Progress

cs.LG ·2026-09-23 ·Khoa Tran, Tri Le, Hung-Cuong Trinh, Hung Tran-Nam
similarity 0.53
Abstract

Accurate remaining discharge time (RDT) prediction is challenging in real-world battery applications because future load profiles are unknown and highly dynamic. To address the uncertainty of continuous RDT regression, this paper introduces Relative Discharge Stage (RDS), a battery-management indicator that represents the remaining discharge condition using five interpretable classes: Normal, Good, Moderate, Low, and Recharge Required. Unlike state of charge (SOC), which reflects the current charge level, RDS characterizes the remaining discharge process without requiring future-current information during inference. A physics-informed RDS classification framework is proposed, combining SOC estimation with lightweight temporal learning. The SOC-estimation component includes second-order ECM state and terminal-voltage prediction, hysteresis and OCV temperature correction, core-temperature estimation, and AEKF state correction, supported by OCV evaluation, online STC-ECM parameter adaptation, and pretrained neural residual-voltage correction. The measured current, terminal voltage, surface temperature, and estimated SOC are arranged into a sliding observation window and processed by a lightweight temporal convolutional network. Experiments on two public lithium-ion battery datasets demonstrate robust RDS classification, with accuracy exceeding 80% under varying load and thermal conditions.

0.04

Harmonic-Constrained Hosting Capacity of Active Distribution Networks Using ESS Compensation and Certified Adaptive Decision-Tree Envelopes

eess.SY ·2026-11-16 ·Pengyu Ren, Wei Sun, Fei Teng, Gareth Harrison
similarity 0.53
Abstract

Active distribution networks increasingly rely on coordinated inverter-based resources to accommodate renewable generation, while harmonic limits constrain the capacity that can be connected. This paper proposes a harmonic optimal power flow (HOPF) method with active energy-storage-system (ESS) support. ESS charging, discharging and harmonic-current compensation are jointly scheduled under state-of-charge dynamics and a shared converter-current rating. An adaptive decision tree learns voltage-current partitions from OPF operating points. Within each leaf, an affine plane is fitted on an analytic grid and certified as a lower envelope. A disaggregated mixed-integer formulation embeds these envelopes in a second-order-cone-relaxed network model. Annual hourly data are assessed through daily capacity optimization, followed by componentwise capacity aggregation and chronological full-year feasibility validation. In the case study, the OPF reference of 65.572 MW exceeds the adopted harmonic bounds, whereas HOPF without harmonic support yields an annually validated capacity of 56.892 MW. With each generator capacity bounded by its OPF reference, the proposed method recovers the complete reference allocation. Coordinated energy dispatch and harmonic compensation thus recover generation capacity within the installed ESS converter ratings.

0.23

Beyond Higher-Pulse Rectification: Operational Harmonic Coordination in Renewable P2H Systems

eess.SY math.OC ·2026-09-03 ·Yangjun Zeng, Yiwei Qiu, Jie Zhu, Yi Zhou, Tao Wu +4 more
similarity 0.53
Abstract

Thyristor rectifiers (TRs) are cost-effective electrolysis power supplies for renewable power-to-hydrogen (ReP2H) systems, but their harmonics may violate grid-code limits. In contrast to conventional solutions that rely on higher-pulse (such as 24-pulse) rectifiers, this paper proposes an operational harmonic coordination scheme that enables low-cost 12-pulse TRs to meet harmonic requirements through coordinated operation. First, a harmonic model quantifies the effects of rectifier transformer (RCT) tap positions and electrolytic currents, enabling harmonic cancellation among multiple electrolyzers (ELZs). A two-layer framework then coordinates hydrogen production and harmonic mitigation. Hourly scheduling determines ELZ commitment within the harmonic feasible region under renewable uncertainty using stochastic programming and a modified progressive hedging algorithm, while minute-level dispatch tracks renewable power and mitigates harmonics. A decomposition algorithm separates production dispatch from harmonic mitigation to improve computational efficiency. Case studies based on real-life projects show that the proposed method increases profit by 31% over current-only regulation. Annual simulations further show that coordinated 12-pulse TRs can replace 24-pulse rectifiers for harmonic compliance by exchanging additional RCT tap actions for lower transformer investment, reducing rectification-stage cost by 37.5%.

0.21

Learning-Based Augmentation and Adaptation for Grid Sim-to-Real Model Discrepancy

eess.SY ·2026-09-18 ·Sayak Mukherjee, Kyung-Bin Kwon, Ramij R. Hossain, Marcelo Elizondo
benchmark similarity 0.53
Abstract · 12 pages, 5 figures, 3 tables

Modern power systems can encounter increased discrepancy between the operators' simulation model and the actual true dynamics of the grid, driven by uncertainties caused by integration of new inverter-based resources (IBRs), large loads, unmodeled dynamics, parameter drifts, etc., to name a few. All of these impact the control room operations, where some critical oscillations may not be captured during the transient studies. To circumvent these issues, we propose a learning-augmented hybrid approach where the operator simulation model is supplemented with artificial intelligence (AI)-learned residual models using the phasor measurement unit (PMU)/ point-on-wave (PoW) based sensed trajectory data. The physics-based operator model provides interpretability and structural consistency, while the learned residual captures discrepancies caused by non-idealities. The learned model employs advanced neural architectures and consists of a backbone encoder and multi-head decoder layers for heterogeneous grid channels. Subsequently, we formulated a continual learning-motivated adaptation framework such that the baseline residual AI model can also be updated when the underlying real grid model changes in future conditions. Extensive numerical simulations are performed on the IEEE 68-bus benchmark model with a diverse set of disturbances, and different state-of-the-art predictive architectures involving recurrent learners, latent neural ODEs, and transformers are explored to demonstrate both residual learning and adaptation capabilities.

0.28