CS Paper Radar

RecMorph: Topology-Guided Spatial Recurrence for Generalized Morphology Control

Quanrui Rao, Yong Liu, Xueming Xiao, Yingbo Luo, Kun Wu, Zhenyu Xu, Meibao Yao

cs.RO cs.LG ·submitted 2026-09-16 09:17 UTC · v1
code/data

Abstract

Generalized morphology control requires a single policy to transform information across limbs with different physical roles, coordinate whole-body motion, and remain efficient as body size grows. Existing communication mechanisms address these requirements only partially. We introduce RecMorph, a topology-guided spatial recurrent architecture that uses recurrent sequence computation to jointly perform cross-limb communication and representation transformation. A depth-first traversal converts the kinematic tree into a morphology-derived sequence, along which shared bidirectional transitions progressively transform limb information before action decoding. Residual preservation, RMS normalization, and input-dependent channel modulation stabilize this repeated spatial transformation, yielding linear token complexity at fixed model width and depth. Across five UNIMAL tasks, RecMorph achieves the strongest mean final training performance among the evaluated generalized morphology controllers and the highest measured inference throughput on FT, while generalizing to unseen variations and bodies with up to 30 limbs. We further migrate representative generalized controllers from UNIMAL benchmarks to a four-platform quadruped setting. RecMorph achieves the best macro-averaged performance under nominal and high friction, reduces nominal velocity RMSE by 43.5% relative to specialist MLPs, and one shared policy completes 40 physical Go1/Go2 trials without falls. These results show that topology-guided recurrent transformation provides an effective and efficient communication mechanism for Generalized Morphology Control and remains effective when transferred from procedural bodies to physical robot platforms. Code and experimental resources are publicly available at https://github.com/quanruirao/RecMorph.

Comment
26 pages. Code and experimental resources are available at https://github.com/quanruirao/RecMorph

Closest papers

Nearest neighbours by meaning across the whole index.

Humanoid SRL: Augmenting Humanoids with Supernumerary Limbs for Coordinated Loco-Manipulation

cs.RO ·2026-10-19 ·Fukang Liu, Feiyang Wu, Paul Barsa, Jaehwi Jang, Akshat Jain +10 more
similarity 0.68
Abstract

Humanoid robots are envisioned to perform diverse human-level tasks through their anthropomorphic morphology. Their dual-arm configuration enables a broad range of everyday actions. Yet, as in humans, this morphology can constrain loco-manipulation when both arms are occupied or additional contacts are required beyond their reach. Supernumerary robotic limbs (SRLs) offer a way to extend these capabilities, but their integration requires the added limb to be coordinated with whole-body motion and balance. In this study, we develop and integrate a supernumerary arm into a humanoid platform to investigate how morphological augmentation reshapes its feasible action space. Through quantitative analysis and hardware experiments across two configurations, we show how the additional limb expands whole-body interaction capabilities by enabling manipulation and support to be coordinated beyond the constraints of the native dual-arm configuration. To control this augmented morphology, we leverage model-based trajectory optimization (TO) to generate dynamically feasible motions for goal-conditioned reinforcement learning (RL) controllers. The controllers are trained in simulation and transferred to hardware in a zero-shot manner, enabling coordinated whole-body skills for contact-rich tri-arm loco-manipulation. We further show vision-guided autonomous execution on selected tasks using diffusion policies trained from hardware demonstrations. Our findings suggest that humanoid morphology need not be restricted to human-like forms, but can be reimagined as an extensible design space for robotic augmentation.

0.17

RoboMorpher: Scaling Robot Morphology Representations for Cross-Embodiment Action Prediction

cs.RO ·2026-11-18 ·Wenwei Lin, Yan Qin, Weiliang Deng, Zixuan Li, Kaixuan Wang +10 more
benchmark similarity 0.66
Abstract · Website: https://robomorpher.github.io/

Learning shared action representations is central to cross-embodiment manipulation. However, identical joint values can produce different spatial configurations across robots, limiting representations learned from joint values alone. We introduce RoboMorpher, a morphology-conditioned action tokenizer that jointly reconstructs joint angles and link poses to associate control coordinates with their kinematic effects. MorphGen supplies scalable kinematic supervision by generating serial-arm descriptions from survey-derived geometric priors. We pretrain RoboMorpher on 40 million morphology-state pairs and integrate the frozen tokenizer into a vision-language-action policy for discrete prediction and continuous refinement. We also introduce EmbodiBench, a ten-task benchmark with 30 generated URDFs per task. With downstream URDFs excluded from tokenizer pretraining, the policy achieves 56.40% success on RoboTwin 2.0 and 23.27% on EmbodiBench, exceeding continuous joint-space control by 9.73 and 15.34 percentage points. Removing link-pose supervision reduces EmbodiBench success by 17.94 percentage points, supporting morphology-aware geometric supervision for joint-action representation learning.

0.30

PolyMorph: Learning Locomotion Policy for Cross-Embodiment Adaptation

cs.RO ·2026-10-14 ·Hyunsik Oh, Seunghun Jeon, Donghoon Youm, Jungwoo Hur, Hyeongjun Kim +3 more
top venue similarity 0.66
Abstract

Reinforcement learning has enabled robust locomotion for legged robots, but learned policies are typically tied to a specific robot morphology and require additional engineering when the number of legs, actuators, or mechanical properties change. We present PolyMorph, a morphology-conditioned framework that learns a single locomotion policy for heterogeneous legged robots. PolyMorph converts each robot's URDF into joint-link modules and combines a recurrent encoder, graph-based Transformer, and per-joint decoder to generate actions across variable leg counts and joint configurations. To improve training stability, PolyMorph uses morphology-normalized rewards, adaptive robot sampling, and URDF-derived PD-gain initialization. We evaluate PolyMorph in simulation across bipedal, tripedal, and quadrupedal robots, including unseen morphology variants and platforms, and deploy the policy on real quadruped platforms operated in multiple configurations. The results show that a single PolyMorph policy generalizes across diverse robot morphologies without per-robot policy retraining.

0.38

Morphology-Aware Human Motion Retargeting for Wheeled-Humanoid Loco-Manipulation

cs.RO ·2026-09-10 ·Chenbo Xia, Chao Ye
similarity 0.65
Abstract

Human-to-humanoid retargeting has largely been studied on legged platforms, while comparatively few wheeled-humanoid systems support coupled locomotion and manipulation from general human motion. Building on GMR's configurable general-motion retargeting and BeyondMimic's physically simulated R1 Pro learning framework, we present a reproducible pipeline that converts multi-dataset SMPLX motion into executable loco-manipulation behavior for the Galaxea R1 Pro wheeled humanoid. The robot has a planar three-wheel base, a serial torso, and two arms but no leg joints, so human lower-body motion must be redistributed across base motion and torso posture without sacrificing manipulation-relevant arm geometry. Our pipeline combines canonical body-shape preprocessing, planar-base normalization, morphology-aware differential inverse kinematics, shoulder-rooted hierarchical arm retargeting, and continuous torso substitution for bending and squatting. A reference-twist-driven planning layer then decodes planar base motion into continuous three-wheel steering and rolling commands subject to hysteresis, kinematic continuity, acceleration, and actuator-rate limits. Finally, a 21-dimensional BaseDecode policy is trained in Isaac Lab with directional joint-limit scaling, focused upper-body tracking, and a staged wheel-contact reward. The resulting system provides a complete bridge from human motion data to physically trackable wheeled-humanoid loco-manipulation rather than a visualization-only retargeter; quantitative policy comparisons remain scheduled for a later revision.

0.44

Burden, Bounty, or Bliss? Muscle-Aware Retargeting and Null-Space Exploration for Whole-Body Musculoskeletal Control

cs.RO ·2026-11-07 ·Ruiyang Kong, Takeshi Oishi
benchmark similarity 0.65
Abstract · 9 pages, 4 figures, 4 tables. Submitted to IEEE ICRA 2027

Learning whole-body musculoskeletal control from human motion is important for developing human-like robots, assistive devices, and rehabilitation systems. This task presents two main challenges, namely reference trajectories that are kinematically plausible but difficult to reproduce through muscle-driven dynamics, and a highly redundant 700-dimensional action space in which unstructured exploration can easily disrupt the target motion. In this paper, we propose a motion-to-policy pipeline that exploits muscle redundancy in two complementary stages. First, muscle-aware retargeting (MAR) performs bounded adaptation of kinematic trajectories subject to hard semantic, anatomical, and contact constraints. We motivate the constraint bounds by analyzing how reference-trajectory artifacts affect muscle-driven tracking. Second, null-space exploration (NSE) estimates a one-control-frame mapping from muscle excitations to generalized forces and injects bounded, anatomically structured perturbations along its null space into the actions of a value-guided flow policy. On a 24-clip motion-capture benchmark, MAR and NSE together solve every reference, reach the full horizon with half the samples of the baseline pipeline, and lower joint-center error by 44% without late collapse. To the best of our knowledge, this is the first end-to-end pipeline that transforms monocular video into a trained whole-body imitation policy controlling 700 muscles.

0.13

BRIDGE: An Open-Source Humanoid Platform via Morphology-Control Co-Design for Physical AI

cs.RO cs.AI ·2026-09-03 ·Jianren Wang, Letian Qian, Zikai Wang, Weiwei Wu, Junjie Zong +2 more
code/data similarity 0.65
Abstract

Developing humanoid robots capable of leveraging human behavioral data is essential for general-purpose embodiment, yet conventional development remains bottlenecked by a decoupled paradigm that isolates hardware design from whole-body control. This approach leads to suboptimal systems that compromise human-like fluidity and agility. To bridge this gap, we introduce a data-driven morphology-control co-design framework that optimizes humanoid morphology for human-like movement. To quantify morphological fidelity, we also introduce a novel metric that jointly considers kinematic retargeting fidelity to human motion and dynamic tracking performance. Our framework achieves state-of-the-art (SOTA) performance across all metrics compared to baseline humanoids (Bumi, K1, and Toddlerbot). Finally, we realize this design in Bridge, an open-source, 88cm-tall humanoid platform released alongside its control policy. We demonstrate that Bridge captures human motion data with superior fidelity, exhibiting exceptional performance across foundational locomotion, robust balance, and highly dynamic maneuvers. Videos and open-source materials: https://sites.google.com/view/bridgerobot.

0.46

Graph-Operator World Models for Morphology-Parameter Generalization in Continuous Control

cs.AI cs.RO ·2026-08-21 ·Xu Yang, Yiqin Yang, Qianchuan Zhao
similarity 0.64
Abstract

World models for continuous control are commonly trained for a fixed physical system and can degrade when known morphology parameters such as link lengths, masses, damping, and actuation change. Existing approaches often provide these parameters as conditioning information, but leave unspecified which part of the learned transition should remain reusable and which part should change with morphology. We propose Graph-Operator World Models (GraphOp-WM), a structured world model for generalization across unseen morphology parameters within related articulated robot families. GraphOp-WM represents bodies and their kinematic relations as an attributed graph and factorizes each transition into a morphology-independent local dynamics basis and a morphology-conditioned structured operator. The operator combines node-local modulation, kinematic-tree coupling, and a low-rank global correction, while architectural information separation, basis normalization, and paired-morphology supervision encourage static morphology dependence to be carried by the operator pathway. Graph-level readout and edge-wise action representations provide a compatible interface for reward, value, and TD-MPC-style planning. We further define controlled MuJoCo parameter splits covering interpolation, extrapolation, and held-out compositions of link geometry, mass, damping, and actuation parameters in Hopper, Walker2d, and HalfCheetah.

0.18

PS-DLO: Property- and Spatially Aware Deformable Linear Object Manipulation Policy

cs.RO ·2026-10-25 ·Mengdi Li, Boxian Yao, Xiyu Zhu, Yunfan Lou, Yifan Yang +4 more
similarity 0.64
Abstract

Deformable linear objects (DLO) pose a coupled perception and control challenge: their slender geometry makes precise localization difficult, while their deformations depend on object-specific physical properties. To address this challenge, we propose PS-DLO, a property- and spatially aware DLO manipulation policy. First, contrastive image-text learning maps the initial observation to categorical descriptions of DLO properties, providing explicit physical and structural priors for action generation. Second, SAM3 extracts mask-guided features from future observations, which are distilled into the policy's action expert to encode task-relevant DLO regions and their subsequent configurations. We evaluate PS-DLO on nine real-world tasks across single-arm and bimanual platforms, training a shared multi-task policy for each embodiment. PS-DLO achieves an average success rate of 68.9%, exceeding the strongest baseline by 20.0 percentage points. In generalization experiments, PS-DLO achieves higher success rates than the baseline in six of seven visual-shift conditions on butterfly-knot untying. These results demonstrate that combining object-property priors with future spatial supervision improves multi-task DLO manipulation and robustness to visual variation.

0.18